English

Interface Strengthening of Composite Current Collectors for High-Safety Lithium-Ion Batteries

• Ru Wang ^{1, 3, †,} ,
• Zhikang Liu ^{1, †,} ,
• Chao Yan ^4, ,
• Long Qie ^{2, ,} ,
• Yunhui Huang ^{2, ,}

• 1.

  School of Materials Science and Engineering, Tongji University, Shanghai 201804, China

• 2.

  State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

• 3.

  Nanjing Tongning Institude of New Materials, Nanjing 211161, China

• 4.

  Zhejiang Rouzhen Technology Co. Ltd., Jiaxing 314499, Zhejiang Province, China

Corresponding author: Email: qie@hust.edu.cn (L.Q.); Email: huangyh@hust.edu.cn (Y.H.)

• Received Date: 25 March 2022
  Accepted Date: 26 April 2022
  Revised Date: 19 April 2022
  Available Online: 15 February 2023
• Fund Project:

  the China Postdoctoral Science Foundation 

  Zhejiang Rouzhen Technology Co., Ltd. 

• ^†These authors contributed equally to this work.

Abstract: The use of high-capacity ternary cathode materials for high-energy batteries can cause thermal runaway of lithium-ion batteries (LIBs), hindering their safe use and further development. Therefore, improving the energy density of LIBs while maintaining their safety is essential. Current collectors (CCs), which serve as the electron carrier during the electrochemical process, do not contribute to capacity and are regarded as "dead weight" to the cells. The use of composite CCs, which have a sandwich structure where a thin metal (e.g., Al and Cu) layer is deposited on both sides of polymer films, can reduce the weight of CCs owing to the use of the low-density insulating substrate and improve the safety of LIBs (evaluated by the nail penetration test). However, due to the weak interfacial adhesion between the substrate and metal coating layer, the composite CCs may easily delaminate in electrolytes during high-temperature immersion, which could not meet the requirement for the long-term stability. Herein, we introduced an oxide strengthening layer between the substrate (polyethylene terephthalate, PET) and Al layer. The objective of strengthening layer is to increase the interface binding force between the metal and polymer substrate by enhancing the mechanical interlocking effect between the layers and forming a stable chemical bond at the interface. This increased interface binding force effectively improved the electrolyte compatibility of composite CCs even at a high temperature of 85 ℃. Based on the results of atomic force microscopy and X-ray photoelectron spectroscopy, we proposed a mechanism for the enhancement of both mechanical interlocking and chemical bonding. Additionally, the composite CCs possessed good mechanical properties that ensure their compatibility with conventional battery fabrication technologies. LIBs using composite CCs exhibited a comparable electrochemical performance to that of aluminum-CC-based (Al CCs) cells, but better performance in nail penetration test. After 280 cycles at 0.2 C, the cell showed high-capacity retention. Al-CC-based cells and PET-AlO_x-Al-CC based cells remain 80.55% and 80.9% capacity retention respectively, which indicates the comparable performance. This shows that the composite CCs technology is fully adapted to the existing battery manufacturing technology, and has little influence on the electrochemical performance of LIBs. Specifically, cells with PET-AlO_x-Al CCs easily passed the nail penetration test under 100% state of charge without an obvious temperature rise. Furthermore, the voltage of the punctured batteries remained at ~4 V and could still be charged and discharged. The composite CCs successfully prevented the internal short circuit and markedly improved the safety of LIBs during the nail penetration test. Our findings provide theoretical guidance and solutions for the industrialization of composite CCs.

Key words:
• Lithium-ion battery
•  /  Composite current collector
•  /  Interfacial strengthening
•  /  Oxide strengthening layer
•  /  Electrolyte compatibility

• 1. [1]

     郭骞. 太阳能, 2021, No. 12, 5. doi: 10.19911/j.1003-0417.tyn20210318.05Guo, Q. Solar Energy 2021, No. 12, 5. doi: 10.19911/j.1003-0417.tyn20210318.05

  2. [2]

     关俊, 李念武, 于乐. 物理化学学报, 2021, 37 (2), 2009011. doi: 10.3866/PKU.WHXB202009011Guan, J.; Li, N. W.; Yu, L. Acta Phys. -Chim. Sin. 2021, 37 (2), 2009011. doi: 10.3866/PKU.WHXB202009011

  3. [3]

     华广斌, 樊晏辰, 张千帆. 物理化学学报, 2021, 37 (2), 2008089. doi: 10.3866/PKU.WHXB202008089Hua, G.; Fan, Y.; Zhang, Q. Acta Phys. -Chim. Sin. 2021, 37 (2), 2008089. doi: 10.3866/PKU.WHXB202008089

  4. [4]

     张世超, 沈泽宇, 陆盈盈. 物理化学学报, 2021, 37 (1), 2008065. doi: 10.3866/PKU.WHXB202008065Zhang, S.; Shen, Z.; Lu, Y. Acta Phys. -Chim. Sin. 2021, 37 (1), 2008065. doi: 10.3866/PKU.WHXB202008065

  5. [5]

     吴锋, 李晴, 陈来. 物理化学学报, 2020, 38 (5): 2007017. doi: 10.3866/PKU.WHXB202007017Wu, F.; Li, Q.; Chen, L. Acta Phys. -Chim. Sin. 2020, 38 (5), 2007017. doi: 10.3866/PKU.WHXB202007017

  6. [6]

     董海斌, 张少禹, 李毅, 羡学磊, 伊程毅, 刘连喜, 于东兴, 韩光, 盛彦锋. 储能科学与技术, 2019, 8 (S1), 65. doi: 10.19799/j.cnki.2095-4239.2019.0052Dong, H; Zhang, S; Li, Y; Xian X; Yi, C; Liu, L; Yu, X; Han, G; Sheng, Y. Energy Storage Sci. Technol. 2019, 8 (S1), 65. doi: 10.19799/j.cnki.2095-4239.2019.0052

  7. [7]

     Wang, Y.; Ren, D. S.; Feng, X. N.; Wang, L.; Ouyang, M. G. Appl. Energy 2022, 306, 117943. doi: 10.1016/j.apenergy.2021.117943

  8. [8]

     Li, Y.; Liu, X.; Wang, L.; Feng, X. N.; Ren, D. S.; Wu, Y.; Xu, G. L.; Lu, L. G.; Hou, J. X.; Zhang, W. F.; et al. Nano Energy 2021, 85, 105878. doi: 10.1016/j.nanoen.2021.105878

  9. [9]

     Yun, J. H.; Han, G. B.; Lee, Y. M.; Lee, Y. G.; Kim, K. M.; Park, J. K.; Cho, K. Y. Electrochem. Solid State Lett. 2011, 14 (8), A116. doi: 10.1149/1.3596721

  10. [10]

      Fritsch, M.; Coeler, M.; Kunz, K.; Krause, B.; Marcinkowski, P.; Potschke, P.; Wolter, M.; Michaelis, A. Batteries 2020, 6 (4), 60. doi: 10.3390/batteries6040060

  11. [11]

      Ye, Y. S.; Chou, L. Y.; Liu, Y. Y.; Wang, H. S.; Lee, H. K.; Huang, W. X.; Wan, J. Y.; Liu, K.; Zhou, G. M.; Yang, Y. F.; et al. Nat. Energy 2020, 5(10), 786. doi: 10.1038/s41560-020-00702-8

  12. [12]

      Pham, M. T. M.; Darst, J. J.; Walker, W. Q.; Heenan, T. M. M.; Patel, D.; Iacoviello, F.; Rack, A.; Olbinado, M. P.; Hinds, G.; Brett, D. J. L.; et al. Cell Rep. Phys. Sci. 2021, 2 (3), 100360. doi: 10.1016/j.xcrp.2021.100360

  13. [13]

      Kang, H.; Park, H.; Park, Y.; Jung, M.; Kim, B. C.; Wallace, G.; Cho, G. Sci. Rep. 2014, 4 (1), 5387. doi: 10.1038/srep05387

  14. [14]

      Shin, K. -H.; Nguyen, H. A. D.; Park, J.; Shin, D.; Lee, D. J. Coat. Technol. Res. 2017, 14 (1), 95. doi: 10.1007/s11998-016-9844-y

  15. [15]

      Struller, C. F.; Kelly, P. J.; Copeland, N. J. Surf. Coat. Technol. 2014, 241, 130. doi: 10.1016/j.surfcoat.2013.08.011

  16. [16]

      Kouicem, M. M.; Tomasella, E.; Bousquet, A.; Batisse, N.; Monier, G.; Robert-Goumet, C.; Dubost, L. Appl. Surf. Sci. 2021, 564, 150322. doi: 10.1016/j.apsusc.2021.150322

  17. [17]

      Schissel, P.; Kennedy, C.; Goggin, R. J. Adhes. Sci. Technol. 1995, 9 (4), 413. doi: 10.1163/156856195X00356

  18. [18]

      Mwema, F. M.; Oladijo, O. P.; Akinlabi, S. A.; Akinlabi, E. T. J. Alloy. Compd. 2018, 747, 306. doi: 10.1016/j.jallcom.2018.03.006

  19. [19]

      Kim, S. H.; Kim, M.; Lee, J. H.; Lee, S. ACS Appl. Mater. Interfaces 2018, 10 (12), 10454. doi: 10.1021/acsami.8b00761

  20. [20]

      Bichler, C.; Kerbstadt, T.; Langowski, H. C.; Moosheimer, U. Surf. Coat. Technol. 1999, 112 (1–3), 373. doi: 10.1016/s0257-8972(98)00780-4

  21. [21]

      Cueff, R.; Baud, G.; Benmalek, M.; Besse, J. P.; Butruille, J. R.; Dunlop, H. M.; Jacquet, M. Thin Solid Films 1995, 270 (1), 230. doi: 10.1016/0040-6090(95)06917-8

  22. [22]

      谢超杰; 王克俭. 塑料包装, 2018, 28 (2), 8. https://www.cnki.com.cn/Article/CJFDTOTAL-SLBZ202101013.htmXie, C; Wang, K. Plast. Packag. 2018, 28 (2), 8. https://www.cnki.com.cn/Article/CJFDTOTAL-SLBZ202101013.htm

  23. [23]

      刘玉兰; 汪建华; 熊礼威; 武汉工程大学学报, 2010, 32 (5), 4. doi: 10.3969/j.issn.1674Liu, Y; Wang, J; Xiong, L. J. Wuhan Inst. Technol. 2010, 32 (5), 4. doi: 10.3969/j.issn.1674

  24. [24]

      Sundararajan, M; Subramani, S. Devarajan, M; Jaafar, M. J. Mater. Sci: Mater Electron. 2020, 31, 9641. doi: 10.1007/s10854-020-03507-3

  25. [25]

      翟兰兰, 凌国平, 郦剑. 材料导报, 2006, No. S2, 274. doi: 10.3321/j.issn:1005-023X.2006.z2.080Zhai, L; Ling, G; Li, J. Mater. Rep. 2006, No. S2, 274. doi: 10.3321/j.issn:1005-023X.2006.z2.080

  26. [26]

      Drabold, D. A.; Adams, J. B.; Anderson, D. C.; Kieffer. J. Adhesion 1993, 42 (1–2), 55. doi: 10.1080/00218469308026570

  27. [27]

      刘壮, 林晶, 孙智慧, 高德. 真空科学与技术学报, 2009, 29 (S1), 94. doi: 10.3969/j.issn.1672-7126.2009.z1.22Liu, Z; Lin, J; Sun, Z; Gao, D. J. Vac. Sci. Technol. 2009, 29 (S1), 94. doi: 10.3969/j.issn.1672-7126.2009.z1.22

  28. [28]

      Madocks, J; Rewhinkle, J; Barton, L. Mater. Sci. Eng. 2005, 119 (3). 2683. doi: 10.1016/j.mseb.2004.12.080

  29. [29]

      Peacock, A. Handbook of Polyethylene: Structures: Properties, and Applications, 1st ed.; CRC Press. : Boca Raton, FL, USA, 2000; pp. 20–25

  30. [30]

      吕东生; 李伟善; 电源技术, 2007, 31 (10), 3. doi: 10.3969/j.issn.1002-087X.2007.10.020Lv, D; Li, W. J. Power Sources 2007, 31 (10), 3. doi: 10.3969/j.issn.1002-087X.2007.10.020

  31. [31]

      陈海. 锂离子电池正极铝集流体耐蚀性能研究. 哈尔滨工业大学[D]. 哈尔滨: 哈尔滨工业大学, 2009.Chen, H. Study on the Anti-Corrosion of Alumium Current Collector for Lithium-Ion Battery. Master Dissertation, Harbin Institute of Technology, Harbin, 2009.

  32. [32]

      Raveh, A.; Tsameret, Z. K.; Grossman, E. Surf. Coat. Technol. 1997, 88 (1–3), 103. doi: 10.1016/S0257-8972(95)02757-2

  33. [33]

      Alfonsetti, R.; Lozzi, L.; Passacantando, M.; Picozzi, P.; Santucci, S. Appl. Surf. Sci. 1993, s70–71, 222. doi: 10.1016/0169-4332(93)90431-A

  34. [34]

      Moulder, J. F.; Stickle, W. F.; Sobol, P. E. Handbook of X-Ray Photoelectron Spectroscopy, 1st ed.; Perkin-Elmer Corporation: Physical Electronics Division 6509 Flying Cloud Drive Eden Prairie, MN 55344, USA, 1992; pp. 55–58.

  35. [35]

      Huang, C.; Liu, C. H.; Wu, S. Y. Surf. Interface Anal. 2009, 41 (1), 44. doi: 10.1002/sia.2975

  36. [36]

      Williams, K. R.; Gupta, K.; Wasilik, M. J. Microelectromech. Syst. 2003, 12, 761. doi: 10.1109/JMEMS.2003.820936

  37. [37]

      Williams, K. R.; Gupta, K.; Wasilik, M. J. Microelectromech. Syst. 2003, 12 (6), 761. doi: 10.1109/jmems.2003.820936

•