English

Electrocatalytic CO₂ Reduction to Ethylene over CeO₂-Supported Cu Nanoparticles: Effect of Exposed Facets of CeO₂

• Chu Senlin ^1, ,
• Li Xin ^1, ,
• Robertson Alex W. ^2, ,
• Sun Zhenyu ^{1, ,}

• 1.

  State Key Laboratory of Organic-Inorganic Composites, College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China

• 2.

  Department of Materials, University of Oxford, Oxford, OX1 3PH, UK

Corresponding author: Sun Zhenyu, sunzy@mail.buct.edu.cn

• Received Date: 07 September 2020
  Accepted Date: 28 September 2020
  Revised Date: 28 September 2020
  Available Online: 15 May 2021
• Fund Project:

  This work was supported by National Natural Science Foundation of China (21972010) and Beijing Natural Science Foundation, China (2192039)

Abstract: Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.

Key words:
• CO₂
•  /  Electrochemical reduction
•  /  Ethylene
•  /  Cu
•  /  CeO₂
•  /  Exposed facet

• 1. [1]

     de Arquer, F. P. G.; Dinh, C. -T.; Ozden, A.; Wicks, J.; McCallum, C.; Kirmani, A. R.; Nam, D. -H.; Gabardo, C.; Seifitokaldani, A.; Wang, X. Science 2020, 367, 661. doi: 10.1126/science.aay4217

  2. [2]

     高云楠, 刘世桢, 赵振清, 陶亨聪, 孙振宇.物理化学学报, 2018, 34, 858. doi: 10.3866/PKU.WHXB201802061Gao, Y. N.; Liu, S. Z.; Zhao, Z. Q.; Tao, H. C.; Sun, Z. Y. Acta Phys. -Chim. Sin. 2018, 34, 858. doi: 10.3866/PKU.WHXB201802061

  3. [3]

     Sun, Z. Y.; Talreja, N.; Tao, H. C.; Texter, J.; Muhler, M.; Strunk, J.; Chen, J. F. Angew. Chem. Int. Ed. 2018, 57, 7610. doi: 10.1002/anie.201710509

  4. [4]

     Sun, Z. Y.; Ma, T.; Tao, H. C.; Fan, Q.; Han, B. X. Chem 2017, 3, 560. doi: 10.1016/j.chempr.2017.09.009

  5. [5]

     Ma, T.; Fan, Q.; Tao, H. C.; Han, Z. S.; Jia, M. W.; Gao, Y. N.; Ma, W. J.; Sun, Z. Y. Nanotechnology 2017, 28, 472001. doi: 10.1088/1361-6528/aa8f6f

  6. [6]

     杨艳, 张云, 胡劲松, 万立骏.物理化学学报, 2020, 36, 1906085. doi: 10.3866/PKU.WHXB201906085Yang, Y.; Zhang, Y.; Hu, J. S.; Wan, L. J. Acta Phys. -Chim. Sin. 2020, 36, 1906085. doi: 10.3866/PKU.WHXB201906085

  7. [7]

     Yang, P. P.; Zhang, X. L.; Gao, F. Y.; Zheng, Y. R.; Niu, Z. Z.; Yu, X. X.; Liu, R.; Wu, Z. Z.; Qin, S.; Chi, L. P. J. Am. Chem. Soc. 2020, 142, 6400. doi: 10.1021/jacs.0c01699

  8. [8]

     刘志敏.物理化学学报, 2019, 35, 1307. doi: 10.3866/PKU.WHXB201908014Liu, Z. M. Acta Phys. -Chim. Sin. 2019, 35, 1307. doi: 10.3866/PKU.WHXB201908014

  9. [9]

     孟怡辰, 况思宇, 刘海, 范群, 马新宾, 张生.物理化学学报, 2021, 37, 2006034. doi: 10.3866/PKU.WHXB202006034Meng, Y. C.; Kuang, S. Y.; Liu, H.; Fan, Q.; Ma, X. B.; Zhang, S. Acta Phys. -Chim. Sin. 2021, 37, 2006034. doi: 10.3866/PKU.WHXB202006034

  10. [10]

      宁会, 王文行, 毛勤虎, 郑诗瑞, 杨中学, 赵青山, 吴明铂.物理化学学报, 2018, 34, 938. doi: 10.3866/PKU.WHXB201801263Ning, H.; Wang, W. H.; Mao, Q. H.; Zheng, S. R.; Yang, Z. X.; Zhao, Q. S.; Wu, M. B. Acta Phys. -Chim. Sin. 2018, 34, 938. doi: 10.3866/PKU.WHXB201801263

  11. [11]

      Jia, M. W.; Fan, Q.; Liu, S. Z.; Qiu, J. S.; Sun, Z. Y. Curr. Opin. Green Sustainable Chem. 2019, 16, 1. doi: 10.1016/j.cogsc.2018.11.002

  12. [12]

      Kim, D.; Kley, C. S.; Li, Y. F.; Yang, P. D. Proc. Natl Acd. Sci. 2017, 114, 10560. doi: 10.1073/pnas.1711493114

  13. [13]

      Ma, T.; Fan, Q.; Li, X.; Qiu, J. S.; Wu, T. B.; Sun, Z. Y. J. CO₂ Util. 2019, 30, 168. doi: 10.1016/j.jcou.2019.02.001

  14. [14]

      Jia, M. W.; Hong, S.; Wu, T. B.; Li, X.; Soo, Y. L.; Sun, Z. Y. Chem. Commun. 2019, 55, 12024. doi: 10.1039/C9CC06178A

  15. [15]

      Tao, H. C.; Sun, X. F.; Back, S.; Han, Z. S.; Zhu, Q. G.; Robertson, A. W.; Ma, T.; Fan, Q.; Han, B. X.; Jung, Y. S.; et al. Chem. Sci. 2018, 9, 483. doi: 10.1039/c7sc03018e

  16. [16]

      Jia, M. W.; Choi, C.; Wu, T. S.; Ma, C.; Kang, P.; Tao, H. C.; Fan, Q.; Hong, S.; Liu, S. Z.; Soo, Y. L.; et al. Chem. Sci. 2018, 9, 8775. doi: 10.1039/C8SC03732A

  17. [17]

      Fan, Q.; Hou, P. F.; Choi, C.; Wu, T. S.; Hong, S.; Li, F.; Soo, Y. L.; Kang, P.; Jung, Y. S.; Sun, Z. Y. Adv. Energy Mater. 2020, 10, 1903068. doi: 10.1002/aenm.201903068

  18. [18]

      Li, F.; Gu, G. H.; Choi, C.; Kolla, P.; Sun, Z. Y. Appl. Catal. B Environ. 2020, 277, 119241. doi: 10.1016/j.apcatb.2020.119241

  19. [19]

      Fan, Q.; Zhang, M. L.; Jia, M. W.; Liu, S. Z.; Qiu, J. S.; Sun, Z. Y. Mater. Today Energy 2018, 10, 280. doi: 10.1016/j.mtener.2018.10.003

  20. [20]

      Lee, S. Y.; Jung, H.; Kim, N. K.; Oh, H. S.; Min, B. K.; Hwang, Y. J. J. Am. Chem. Soc. 2018, 140, 8681. doi: 10.1021/jacs.8b02173

  21. [21]

      Huang, J.; Mensi, M.; Oveisi, E.; Mantella, V.; Buonsanti, R. J. Am. Chem. Soc. 2019, 141, 2490. doi: 10.1021/jacs.8b12381

  22. [22]

      Loiudice, A.; Lobaccaro, P.; Kamali, E. A.; Thao, T.; Huang, B. H.; Ager, J. W.; Buonsanti, R. Angew. Chem. Int. Ed. 2016, 55, 5789. doi: 10.1002/anie.201601582

  23. [23]

      Ren, D.; Deng, Y. L.; Handoko, A. D.; Chen, C. S.; Malkhandi, S.; Yeo, B. S. ACS Catal. 2015, 5, 2814. doi: 10.1021/cs502128q

  24. [24]

      Li, Y. M.; Chu, S. L.; Shen, H. D.; Xia, Q. N.; Robertson, A. W.; Masa, J.; Siddiqui, U.; Sun, Z. Y. ACS Sustainable Chem. Eng. 2020, 8, 4948. doi: 10.1021/acssuschemeng.0c00800

  25. [25]

      Han, Z. S.; Choi, C.; Tao, H. C.; Fan, Q.; Gao, Y. N.; Liu, S. Z.; Robertson, A. W.; Hong, S.; Jung, Y. S.; Sun, Z. Y. Catal. Sci. Technol. 2018, 8, 3894. doi: 10.1039/C8CY01037D

  26. [26]

      Chu, S. L.; Hong, S.; Masa, J.; Li, X.; Sun, Z. Y. Chem. Commun. 2019, 55, 12380. doi: 10.1039/C9CC05435A

  27. [27]

      Kašpar, J.; Fornasiero, P.; Graziani, M. Catal. Today 1999, 50, 285. doi: 10.1016/S0920-5861(98)00510-0

  28. [28]

      Carrettin, S.; Concepción, P.; Corma, A.; Nieto, J. M. L.; Puntes, V. F. Angew. Chem. Int. Ed. 2004, 43, 2538. doi: 10.1002/anie.200353570

  29. [29]

      Campbell, C. T.; Peden, C. H. Science 2005, 309, 713. doi: 10.1126/science.1113955

  30. [30]

      Trovarelli, A. Comments Inorg. Chem. 1999, 20, 263. doi: 10.1080/02603599908021446

  31. [31]

      Trovarelli, A.; Llorca, J. ACS Catal. 2017, 7, 4716. doi: 10.1021/acscatal.7b01246

  32. [32]

      Xu, J. H.; Harmer, J.; Li, G. Q.; Chapman, T.; Collier, P.; Longworth, S.; Tsang, S. C. Chem. Commun. 2010, 46, 1887. doi: 10.1039/b923780a

  33. [33]

      Mai, H. X.; Sun, L. D.; Zhang, Y. W.; Si, R.; Feng, W.; Zhang, H. P.; Liu, H. C.; Yan, C. H. J. Phys. Chem. B 2005, 109, 24380. doi: 10.1021/jp055584b

  34. [34]

      Ye, L.; Mahadi, A. H.; Saengruengrit, C.; Qu, J.; Xu, F.; Fairclough, S. M.; Young, N.; Ho, P. L.; Shan, J. J.; Nguyen, L. ACS Catal. 2019, 9, 5171. doi: 10.1021/acscatal.9b00421

  35. [35]

      Chu, S. L.; Yan, X. P.; Choi, C.; Hong, S.; Robertson, A. W.; Masa, J.; Han, B. X.; Jung, Y. S.; Sun, Z. Y. Green Chem. 2020, 22, 6540. doi: 10.1039/D0GC02279A

  36. [36]

      Ha, H.; Yoon, S.; An, K.; Kim, H. Y. ACS Catal. 2018, 8, 11491. doi: 10.1021/acscatal.8b03539

  37. [37]

      Li, C. W.; Sun, Y.; Djerdj, I.; VPel, P.; Sack, C. C.; Weller, T.; Sann, J.; Ellinghaus, R.; Guo, Y. L.; Smarsly, B. M. ACS Catal. 2017, 7, 6453. doi: 10.1021/acscatal.7b01618

  38. [38]

      Désaunay, T.; Bonura, G.; Chiodo, V.; Freni, S.; Couzinié, J. -P.; Bourgon, J.; Ringuedé, A.; Labat, F.; Adamo, C.; Cassir, M. J. Catal. 2013, 297, 193. doi: 10.1016/j.jcat.2012.10.011

  39. [39]

      Platzman, I.; Brener, R.; Haick, H.; Tannenbaum, R. J. Phys. Chem. C 2008, 112, 1101. doi: 10.1021/jp076981k

  40. [40]

      Sun, Z. Y.; Wang, X.; Liu, Z. M.; Zhang, H. Y.; Yu, P.; Mao, L. Q. Langmuir 2010, 26, 12383. doi: 10.1021/la101060s

  41. [41]

      Haul, R. Acad. Press 1982, 86, 957. doi: 10.1002/bbpc.19820861019

  42. [42]

      Garvie, L. A. J.; Buseck, P. R. J. Phys. Chem. Solids 1999, 60, 1943. doi: 10.1016/S0022-3697(99)00218-8

  43. [43]

      Jiang, K.; Sandberg, R. B.; Akey, A. J.; Liu, X. Y.; Bell, D. C.; Nørskov, J. K.; Chan, K.; Wang, H. Nat. Catal. 2018, 1, 111. doi: 10.1038/s41929-017-0009-x

  44. [44]

      Huang, J. F.; Mensi, M.; Oveisi, E.; Mantella, V.; Buonsanti, R. J. Am. Chem. Soc. 2019, 141, 2490. doi: 10.1021/jacs.8b12381

  45. [45]

      Wu, J.; Ma, S.; Sun, J.; Gold, J. I..; Tiwary, C.; Kim, B.; Zhu, L.; Chopra, N.; Odeh, I. N.; Vajtai, R.; et al. Nat. Commun. 2016, 7, 13869. doi: 10.1038/ncomms13869

  46. [46]

      Kumari, N.; Haider, M. A.; Agarwal, M.; Sinha, N.; Basu, S. J. Phys. Chem. C 2016, 120, 16626. doi: 10.1021/acs.jpcc.6b02860

  47. [47]

      Ye, L.; Mahadi, A. H.; Saengruengrit, C.; Qu, J.; Xu, F.; Fairclough, S. M.; Young, N.; Ho, P. -L.; Shan, J.; Nguyen, L. ACS Catal. 2019, 9, 5171. doi: 10.1021/acscatal.9b00421

•