English

Fabrication of Fluorescent Nanodots by Self-Crosslinking Ufasomes of Conjugated Linoleic Acid and Their Unique Fluorescence Properties

• Ye Fan ,
• Chongmei Cao ,
• Yun Fang ^, ,
• Yongmei Xia

• The Key Laboratory of Synthetic and Biological Colloids (Ministry of Education), School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, Jiangsu Province, China

Corresponding author: Yun Fang, Email: yunfang@126.com; Tel.: +86-510-85917920

• Received Date: 24 February 2020
  Accepted Date: 09 April 2020
  Revised Date: 07 April 2020
  Available Online: 15 March 2022
• Fund Project:

  the National Key Research and Development Program of China 

Abstract: Carbon dots (CDs), as a kind of carbon-based fluorescent nanodots (FNDs), not only retain the advantageous characteristics of carbon-based materials (e.g., low toxicity and biocompatibility) but also exhibit tunable fluorescence emission, low photobleaching, and undergo facile surface functionalization. Therefore, the prospect of applying these materials for analysis and detection, cell imaging, drug delivery, light-emitting devices, photocatalysis, biosensing, and cancer treatment is promising. Although the synthesis of carbon dots from green and renewable feedstocks as biomass carbon sources is possible, the controllability of the involved chemical reactions is poor, resulting in poor atom economy, low quantum yields, and, especially, extremely low yields of carbon dots. In addition, these disadvantages could lead to an increase in equipment requirements and could pose a safety risk because of the need for hydrothermal and solvothermal synthesis. Certain methods even require large amounts of acid/alkali, strong oxidants, or organic solvents, thereby complicating the post-processing process and generating waste and emissions. This research aimed to implement a new idea, namely to "fabricate" rather than "synthesize" carbon-based FNDs from a certain kind of natural and small unsaturated molecule with surface activity relying on a self-assembling and self-crosslinking strategy in lieu of traditional approaches that involve uncontrollable reactions with unknown mechanisms including pyrolysis, dehydrolysis, polyconcensation, and carbonization. In this context, conjugated linoleic acid (CLA) has been studied extensively in our laboratory, and was found to have the self-assembly and self-crosslink characteristics required by the above innovative strategy. This motivated us to adopt CLA as a new carbon source in this study. First, CLA self-assembles into unsaturated fatty acid liposomes (ufasomes) in an aqueous solution of pH 8.6 at ambient temperature (15-25 ℃), and then, the initiator Ammonium persulfate is added to induce self-crosslinking of the ufasomes at 80 ℃ to obtain firm and uniform nanoparticles. On this basis, the possibility of using them as FNDs is investigated. Consequently, FNDs based on self-crosslinked ufasomes (SCU-FNDs) are prepared in high FND yield of 73.9% after dialysis, with a consistent particle size (17 nm), a degree of self-crosslink (DSC) of 75%, and emission of bluish green fluorescence excited at 320 nm. Furthermore the "fabrication" route provided a clear solution of FNDs that could be applied directly without separation and purification and with no wasteful emissions, which is therefore beneficial for large-scale preparation. The experimental results showed that the fluorescence intensities of the SCU-FNDs are positively correlated with both the surface carboxyl groups and DSC results. A reasonable explanation for the former relationship is the effect of the restricted geometry of the ufasomes on the accumulation of oxygen atoms at the surface of FNDs, whereas the latter could be explained by the confinement effect of the covalent crosslink on the motion of the hydrocarbon chain of the CLA molecules. The experimental results also showed that the SCU-FNDs have temperature-sensitive fluorescence properties, which is attributed to the motion of the residual hydrocarbon chain inside the SCU-FNDs even though they have been locally polymerized. The change in the fluorescence intensity of the FNDs as a function of the temperature was good in accordance with the linear relationship I/I₀ = -0.00922T + 1.229 (R² = 0.99) in the range of 25-85 ℃, which demonstrates the potential for preparing green and safe undoped FNDs for use as biocompatible and temperature-sensitive fluorescent probes.

Key words:
• Ufasomes
•  /  Fluorescent nanodots
•  /  Conjugated linoleic acid
•  /  Fluorescence property
•  /  Self-assembly
•  /  Self-crosslink

• 1. [1]

     Xu, X.; Ray, R.; Gu, Y.; Ploehn, H. J.; Gearheart, L.; Raker, K.; Scrivens, W. A. J. Am. Chem. Soc. 2004, 126, 12736. doi: 10.1021/ja040082h

  2. [2]

     Zhang, J.; Yu, S. H. Mater. Today 2016, 19 (7), 382. doi: 10.1016/j.mattod.2015.11.008

  3. [3]

     胡超, 穆野, 李明宇, 邱介山. 物理化学学报, 2019, 35 (6), 572. doi: 10.3866/PKU.WHXB201806060Hu, C.; Mu, Y.; Li, M. Y.; Qiu, J. S. Acta Phys. -Chim. Sin. 2019, 35 (6), 572. doi: 10.3866/PKU.WHXB201806060

  4. [4]

     Sun, Y. P.; Zhou, B.; Lin, Y.; Wang, W.; Fernando, K. A. S.; Pathak, P.; Meziani, M. J.; Harruff, B. A.; Wang, X.; Wang, H.; et al. J. Am. Chem. Soc. 2006, 128, 7756. doi: 10.1021/ja062677d

  5. [5]

     Ming, H.; Ma, Z.; Liu, Y.; Pan, K.; Yu, H.; Wang, F.; Kang, Z. Dalton Trans. 2012, 41 (31), 9526. doi: 10.1039/C2DT30985H

  6. [6]

     Xu, H.; Zhou, S.; Xiao, L.; Li, S.; Song, T.; Wang, Y.; Yuan, Q. Carbon 2015, 87, 215. doi: 10.1016/j.carbon.2015.02.036

  7. [7]

     Chen, B.; Li, F.; Li, S.; Weng, W.; Guo, H.; Guo, T.; Zhang, X.; Chen, Y.; Huang, T.; Hong, X.; et al. Nanoscale 2013, 5 (5), 1967. doi: 10.1039/c2nr32675b

  8. [8]

     Pan, L.; Sun, S.; Zhang, A.; Jiang, K.; Zhang, L.; Dong, C.; Huang, Q.; Wu, A.; Lin, H. Adv. Mater. 2015, 27 (47), 7782. doi: 10.1002/adma.201503821

  9. [9]

     Chen, Q. L.; Wang, C. F.; Chen, S. J. Mater. Sci. 2013, 48 (6), 2352. doi: 10.1007/s10853-012-7016-8

  10. [10]

      Lu, S. Y.; Xiao, G. J.; Sui, L. Z.; Feng, T. L.; Yong, X.; Zhu, S. J.; Li, B. J.; Liu, Z. Y.; Zou, B.; Jin, M. X.; et al. Angew. Chem. Int. Ed. 2017, 56, 6187. doi: 10.1002/ange.201700757

  11. [11]

      Geng, B.; Yang, D.; Pan, D.; Wang, L.; Zheng, F.; Shen, W.; Zhang, C.; Li, X. Carbon 2018, 134, 153. doi: 10.1016/j.carbon.2018.03.084

  12. [12]

      黄彦捷, 连超, 周瑾艳, 黄梓宸, 康晓红, 黄振宇, 李小菁, 陈玲, 关妍. 物理化学学报, 2019, 35 (11), 1267. doi: 10.3866/PKU.WHXB201812053Huang, Y. J.; Lian, C.; Zhou, J. Y.; Huang, Z. C.; Kang, X. H.; Huang, Z. Y.; Li, X. J.; Chen, L.; Guang, Y. Acta Phys. -Chim. Sin. 2019, 35 (11), 1267. doi: 10.3866/PKU.WHXB201812053

  13. [13]

      Mehta, V. N.; Jha, S.; Basu, H.; Singhal, R. K.; Kailasa, S. K. Sensor Actuat. B-Chem. 2015, 213, 434. doi: 10.1016/j.snb.2015.02.104

  14. [14]

      Song, P.; Zhang, L. S.; Long, H.; Meng, M.; Liu, T.; Yin, Y. M.; Xi, R. M. RSC Adv. 2017, 7 (46), 28637. doi: 10.1039/c7ra04122e

  15. [15]

      Shao, J.; Zhu, S.; Liu, H.; Song, Y.; Tao, S.; Yang, B. Adv. Sci. 2017, 4 (12), 1700395. doi: 10.1002/advs.201700395

  16. [16]

      Tao, S. Y.; Song, Y. B.; Zhu, S. J.; Shao, J. R.; Yang, B. Polymer 2017, 116, 472. doi: 10.1016/j.polymer.2017.02.039

  17. [17]

      Zhang, X.; Jiang, M.; Niu, N.; Chen, Z.; Li, S.; Liu, S.; Li, J. ChemSusChem 2018, 11 (1), 11. doi: 10.1002/cssc.201701847

  18. [18]

      Huang, Q.; Lin, X.; Zhu, J. J.; Tong, Q.X. Biosens. Bioelectron. 2017, 94, 507. doi: 10.1016/j.bios.2017.03.048

  19. [19]

      樊晔, 方云, 陈韩婷, 高迪. 高等学校化学学报, 2014, 35 (9), 1933. doi: 10.7503/cjcu20140341Fan, Y.; Fang, Y.; Chen, H. T.; Gao, D. Chem. J. Chin. Univ. 2014, 35 (9), 1933. doi: 10.7503/cjcu20140341

  20. [20]

      高迪, 樊晔, 方云, 李张宜. 精细化工, 2016, 33 (5), 509. doi: 10.13550/j.jxhg.2016.05.005Gao, D.; Fan, Y.; Fang, Y.; Li, Z. Y. Fine Chem. 2016, 33 (5), 509. doi: 10.13550/j.jxhg.2016.05.005

  21. [21]

      Fan, Y.; Fang, Y.; Ma, L. Colloid Surfaces B 2014, 123, 8. doi: 10.1016/j.colsurfb.2014.08.028

  22. [22]

      Fan, Y.; Fang, Y. Ma, L.; Jiang, H. J. Surfact. Deterg. 2015, 18, 179. doi: 10.1007/s11743-014-1591-4

  23. [23]

      Fan, Y.; Ma, J.; Fang, Y.; Liu, T. T.; Hu, X. Y.; Xia, Y. M. Colloid Surfaces B 2018, 167, 385. doi: 10.1016/j.colsurfb.2018.04.035

  24. [24]

      马洁, 樊晔, 方云. 物理化学学报, 2015, 31 (7), 1359. doi: 10.386 6/PKU.WHXB201504131Ma, J.; Fan, Y.; Fang, Y. Acta Phys. -Chim. Sin. 2015, 31 (7), 1359. doi: 10.3866/PKU.WHXB201504131

  25. [25]

      侯娟. 碳点和碳点复合物的快速制备及在荧光分析中的应用研究[D]. 长春: 吉林大学, 2017.Hou, J. Rapid Fabrication of Carbon Dots and Carbon Dots-Based Composites and Their Applications in Fluorescent Analysis. Ph. D. Dissertation, Jilin University, Changchun, 2017.

  26. [26]

      Khanam, A.; Tripathi, S. K.; Roy, D.; Nasim, M. Colloid Surfaces B 2013, 102, 63. doi: 10.1016/j.colsurfb.2012.08.016

  27. [27]

      Chaiendoo, K.; Ittisanronnachai, S.; Promarak, V.; Ngeontae, W. Carbon 2019, 146, 728. doi: 10.1016/j.carbon.2019.02.030

  28. [28]

      Bao, L.; Zhang, Z. L.; Tian, Z. Q.; Zhang, L.; Liu, C.; Lin, Y.; Qi, B. P.; Pang, D. W. Adv. Mater. 2011, 23 (48), 5801. doi: 10.1002/adma.201102866

  29. [29]

      Ding, H.; Yu, S. B.; Wei, J. S.; Xiong, H. M. ACS Nano 2016, 10 (1), 484. doi: 10.1021/acsnano.5b05406

  30. [30]

      Hong, Y. N.; Lam, J. W. Y.; Tang, B. Z. Chem. Soc. Rev. 2011, 40, 5361. doi: 10.1039/c1cs15113d

  31. [31]

      Zhao, E.; Lam, J W Y.; Meng, L.; Hong, Y.; Deng, H.; Bai, G.; Huang, X.; Hao, J.; Tang, B. Z. Macromolecules 2014, 48 (1), 64. doi: 10.1021/ma502160w

  32. [32]

      Song, G.; Lin, Y.; Zhu, Z.; Zheng, H.; Qiao, J.; He, C.; Wang, H. Macromol. Rapid Commun. 2015, 36, 278. doi: 10.1002/marc.201400516

  33. [33]

      Zhu, S.; Zhang, J.; Wang, L.; Song, Y.; Zhang, G.; Wang, H.; Yang, B. Chem. Commun. 2012, 48 (88), 10889. doi: 10.1039/c2cc36080b

  34. [34]

      Zhu, S.; Wang, L.; Zhou, N.; Zhao, X.; Song, Y.; Maharjan, S.; Zhang, J.; Lu, L.; Wang, H.; Yang, B. Chem. Commun. 2014, 50 (89), 13845. doi: 10.1039/c4cc05806b

  35. [35]

      Qiao, Z. A.; Wang, Y. F.; Gao, Y.; Li, H. W.; Dai, T. Y.; Liu, Y. L.; Huo, Q. S. Chem. Commun. 2010, 46 (46), 8812. doi: 10.1039/c0cc02724c

•