Synthesis and Structure Determination of Ag-Ni Alloy Nanocluster Ag4Ni2(SPhMe2)8 (SPhMe2 = 2, 4-dimethylbenzenethiol)

Citation: SUN Guodong, KANG Xi, JIN Shan, LI Xiaowu, HU Daqiao, WANG Shuxin, ZHU Manzhou. Synthesis and Structure Determination of Ag-Ni Alloy Nanocluster Ag₄Ni₂(SPhMe₂)₈ (SPhMe₂ = 2, 4-dimethylbenzenethiol)[J]. Acta Physico-Chimica Sinica, 2018, 34(7): 799-804. doi: 10.3866/PKU.WHXB201710124 shu

银镍合金团簇Ag₄Ni₂(SPhMe₂)₈ (SPhMe₂ = 2, 4-二甲基苯硫酚)的合成及其结构表征

.
安徽大学化学系，先进材料原子工程中心，无机/有机杂化功能材料化学安徽省重点实验室，合肥 230601

通讯作者: 胡大乔, hudaqiao@ahu.edu.cn
汪恕欣, ixing@ahu.edu.cn
朱满洲, zmz@ahu.edu.cn

基金项目:
国家自然科学基金(21372006, U1532141, 21631001, 21602002)资助项目

国家自然科学基金 21602002

国家自然科学基金 21631001

国家自然科学基金 21372006

国家自然科学基金 U1532141

摘要: 具有精确结构的纳米团簇因其有利于分析团簇结构与性质之间的关系而被广为研究。之前的研究结果表明金属银和金属镍在亚纳米尺寸可以形成团簇(Ag₄Ni₂(DMSA)₄ (DMSA =二巯基丁二酸)，但其晶体结构并没有得到具体表征。在本工作中，我们合成了硫醇配体保护的银镍合金纳米团簇：Ag₄Ni₂(SPhMe₂)₈ (SPhMe₂ = 2, 4-二甲基苯硫酚)，并通过X射线单晶衍射、X射线光电子能谱、质谱和热失重等分析手段对结构进行了表征和确认。该工作拓展了合金团簇的基础研究。

关键词:

纳米团簇
/ 合金
/ 晶体学
/ 表面化学
/ 结构

English

Synthesis and Structure Determination of Ag-Ni Alloy Nanocluster Ag₄Ni₂(SPhMe₂)₈ (SPhMe₂ = 2, 4-dimethylbenzenethiol)

Department of Chemistry, Center for Atomic Engineering of Advanced Materials, AnHui Province Key Laboratory of Chemistry for Inorganic/Organic Hybrid Functionalized Materials, Anhui University, Hefei 230601, P. R. China

Corresponding author: HU Daqiao, hudaqiao@ahu.edu.cn WANG Shuxin, ixing@ahu.edu.cn ZHU Manzhou, zmz@ahu.edu.cn

Received Date: 12 September 2017
Accepted Date: 09 October 2017
Revised Date: 02 October 2017
Available Online: 15 July 2018
Fund Project:
The project was supported by the National Natural Science Foundation of China (21372006, U1532141, 21631001, 21602002)

Abstract: Atomically precise pieces of metallic matter with nanometer dimensions, which are called nanoclusters, have attracted special research interest as a frontier in nanoscience research. These nanoclusters exhibit unique properties that make them suitable for widespread applications in fields like medical treatments and catalysis. Studies in nanoclusters have been greatly benefited from the use of advanced instrumentation, especially adaptation of mass spectrometry (e.g., matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) and electrospray ionization mass spectrometry (ESI MS)). However, mass spectrometry could not elucidate the bonding between metals and ligands; therefore, single-crystal X-ray diffraction (SC-XRD) analysis has been used. SC-XRD is significant for the development of the nanocluster range in terms of revealing the precise structure of nanoclusters and fully understanding the structure-property relationship. Furthermore, understanding the nature of nanocluster surface has provided possibility to embellish nanocluster surface and to improve their performance. Nowadays, alloy nanoclusters play an important role in catalysis, biology, and materials science. Researchers have synthesized and predicted the alloy structure composed of silver and nickel in ultra-small size (Ag₄Ni₂(DMSA)_4, (DMSA = meso-2, 3-dimercaptosuccinic acid)). However, no precise crystal structure has been reported. Herein, we report the crystal structure of the Ag-Ni alloy nanocluster Ag₄Ni₂(SPhMe₂)₈. The structure was further confirmed by SC-XRD, X-ray photoelectron spectroscopy (XPS), MALDI-TOF MS, ESI MS and thermo gravimetric analysis (TGA) measurements. The stability experiment suggested that the Ag₄Ni₂ nanocluster could be stable in ultra-small sizes. This research on Ag-Ni alloy nanoclusters will contribute to the understanding of the alloy in ultra-small sizes. Specifically, based on the structure determination by SC-XRD, the structure of Ag₄Ni₂(SPhMe₂)₈ could be divided into three layers: upper and lower layers with Ni(SPhMe₂)₄ complexes constituting a parallelogram, and the middle layer with four silver atoms constituting a parallelogram like a sandwich. The Ag―Ni, Ag―S and Ni―S bond distances were 0.31–0.32, 0.23–0.24, and 0.22–0.23 nm, respectively. XPS analyses revealed that the Ag/Ni/S atomic ratio was 5.19/2.55/10.28, consistent with the corresponding expected ratio of 4/2/8 in Ag₄Ni₂(SPhMe₂)₈. In addition, the Ag 3d_3/2 and Ag 3d_5/2 binding energy peaks were located at 375.0 and 369.0 eV, respectively, and the Ni 2p_1/2 and Ni 2p_3/2 are located at 871.50 and 853.90 eV, respectively. Moreover, combined with ESI, the Ag 3d_3/2 and Ag 3d_5/2 binding energies of Ag₄Ni₂(SPhMe₂)₈ were close to the +1 valences, according to previous reports. Meanwhile, the spectra of Ag₄Ni₂(SPhMe₂)₈ illustrated that the valence of nickel was +2. Additionally, the MALDI-TOF mass spectrum was in good agreement with the ESI results. Weight loss upon heating was used to confirm the percentage of organic material in nanoclusters (66.31% weight loss was observed in TGA, consistent with the 66.67% loss calculated according to the formula). In the liquid state, the UV-Vis spectra showed no change after exposure to oxygen for a few weeks. Meanwhile, we used UV-Vis spectroscopy at temperatures under 80 ℃ to test the stability of the Ag₄Ni₂(SPhMe₂)₈. The absorption peaks were almost identical with each other, suggesting high stability of the Ag₄Ni₂(SPhMe₂)₈. Our study proves that small-sized alloy also has the possibility of diversification, which will play an important role in the synthesis of alloy nanoclusters. Moreover, this research on Ag-Ni alloy nanoclusters will contribute to the understanding of alloys in ultra-small sizes.

Key words:

1. [1]
  Chakraborty, I.; Pradeep, T. Chem. Rev. 2017, 117, 8208. doi: 10.1021/acs.chemrev.6b00769Chakraborty, I.; Pradeep, T. Chem. Rev. 2017, 117, 8208. doi: 10.1021/acs.chemrev.6b00769
2. [2]
  Udayabhaskararao, T.; Sun, Y.; Goswami, N.; Pal, S.; Balasubramanian. K.; Pradeep, T. Angew. Chem. Int. Ed. 2012, 51, 2155. doi: 10.1002/anie.201107696Udayabhaskararao, T.; Sun, Y.; Goswami, N.; Pal, S.; Balasubramanian. K.; Pradeep, T. Angew. Chem. Int. Ed. 2012, 51, 2155. doi: 10.1002/anie.201107696
3. [3]
  Wang, Q.; Lin, Y.; Liu, K. Acc. Chem. Res. 2015, 48, 1570. doi: 10.1021/acs.accounts.5b00007Wang, Q.; Lin, Y.; Liu, K. Acc. Chem. Res. 2015, 48, 1570. doi: 10.1021/acs.accounts.5b00007
4. [4]
  Wang, Y.; Wan, X.; Ren, L.; Su, H.; Li, G.; Malola, S.; Teo, B.; Wang, Q.; Zheng, N. J. Am. Chem. Soc. 2016, 138, 3278. doi: 10.1021/jacs.5b12730Wang, Y.; Wan, X.; Ren, L.; Su, H.; Li, G.; Malola, S.; Teo, B.; Wang, Q.; Zheng, N. J. Am. Chem. Soc. 2016, 138, 3278. doi: 10.1021/jacs.5b12730
5. [5]
  Fan, J.; Song, Y.; Chai, J.; Yang, S.; Chen, T.; Rao, B.; Yu, H.; Zhu, M. Nanoscale 2016, 8, 15317. doi: 10.1039/c6nr04255dFan, J.; Song, Y.; Chai, J.; Yang, S.; Chen, T.; Rao, B.; Yu, H.; Zhu, M. Nanoscale 2016, 8, 15317. doi: 10.1039/c6nr04255d
6. [6]
  Zeng, J.; Guan, Z.; Du, Y.; Nan, Z.; Lin, Y.; Wang, Q. J. Am. Chem. Soc. 2016, 138, 7848. doi: 10.1021/jacs.6b04471Zeng, J.; Guan, Z.; Du, Y.; Nan, Z.; Lin, Y.; Wang, Q. J. Am. Chem. Soc. 2016, 138, 7848. doi: 10.1021/jacs.6b04471
7. [7]
  Wang, Y.; Su, H.; Xu, C.; Li, G.; Gell, L.; Lin, S.; Häkkinen, H.; Zheng, N. J. Am. Chem. Soc. 2015, 137, 4324. doi: 10.1021/jacs.5b01232Wang, Y.; Su, H.; Xu, C.; Li, G.; Gell, L.; Lin, S.; Häkkinen, H.; Zheng, N. J. Am. Chem. Soc. 2015, 137, 4324. doi: 10.1021/jacs.5b01232
8. [8]
  Bootharaju, M.; Joshi, C.; Bakr, O. Angew. Chem. Int. Ed. 2016, 55, 922. doi: 10.1002/anie.201509381.
9. [9]
  Luo, Z.; Zheng, K.; Xie, J. Chem. Commun. 2014, 50, 5143. doi: 10.1039/c3cc47512c.
10. [10]
  杨金龙.物理化学学报, 2017, 33, 1273. doi: 10.3866/PKU.WHXB201704262Yang, J. L. Acta Phys. -Chim. Sin. 2017, 33, 1273. doi: 10.3866/PKU.WHXB201704262
11. [11]
  Yamazoe, S.; Koyasu, K.; Tsukuda, T. Chem. Res. 2014, 47, 816. doi: 10.1021/ar400209a
12. [12]
  Wang, S.; Yu, H.; Zhu, M. Sci. China Chem. 2016, 59, 2. doi: 10.1007/s11426-015-5484-9
13. [13]
  伍志鲲.物理化学学报, 2017, 33, 1930. doi: 10.3866/PKU.WHXB201706026Wu, Z. K. Acta Phys. -Chim. Sin. 2017, 33, 1930. doi: 10.3866/PKU.WHXB201706026
14. [14]
  Kagalwala, H.; Gottlieb, E.; Li, G.; Li, T.; Jin, R.; Bernhard, S. Inorg. Chem. 2013, 52, 9094. doi: 10.1021/ic4013069
15. [15]
  Wang, S.; Meng, X.; Das, A.; Li, T.; Song, Y.; Zhu, T.; Zhu, M.; Jin, R. Angew. Chem. Int. Ed. 2014, 53, 2376. doi: 10.1002/anie.201307480Wang, S.; Meng, X.; Das, A.; Li, T.; Song, Y.; Zhu, T.; Zhu, M.; Jin, R. Angew. Chem. Int. Ed. 2014, 53, 2376. doi: 10.1002/anie.201307480
16. [16]
  Song, Y.; Wang, S.; Zhang, J.; Kang, X.; Chen, S.; Li, P.; Sheng, H.; Zhu, M. J. Am. Chem. Soc. 2014, 136, 2963. doi: 10.1021/ja4131142Song, Y.; Wang, S.; Zhang, J.; Kang, X.; Chen, S.; Li, P.; Sheng, H.; Zhu, M. J. Am. Chem. Soc. 2014, 136, 2963. doi: 10.1021/ja4131142
17. [17]
  Yang, S.; Chai, J.; Song, Y.; Kang, X.; Sheng, H.; Chong, H.; Zhu, M. J. Am. Chem. Soc. 2015, 137, 10033. doi: 10.1021/jacs.5b06235Yang, S.; Chai, J.; Song, Y.; Kang, X.; Sheng, H.; Chong, H.; Zhu, M. J. Am. Chem. Soc. 2015, 137, 10033. doi: 10.1021/jacs.5b06235
18. [18]
  Wong, M. H.; Giraldo, J. P.; Kwak, S. Y.; Koman, V. B.; Sinclair, R.; Lew, T. T. S.; Bisker, G.; Liu, P. W.; Strano, M. S. Nat. Mater. 2016, 16, 264. doi: 10.1038/nmat4771
19. [19]
  俞炜铃, 左会文, 陆春海, 李奕, 章永凡, 陈文凯.物理化学学报, 2015, 31, 425. doi: 10.3866/PKU.WHXB201501191Yu, W. L.; Zuo, H. W.; Lu, C. H.; Li, Y.; Zhang, Y. F.; Chen, W. K. Acta Phys.-Chim. Sin. 2015, 31, 425. doi: 10.3866/PKU.WHXB201501191
20. [20]
  Barrabés, N.; Zhang, B.; Bürgi, T. J. Am. Chem. Soc. 2014, 136, 14361. doi: 10.1021/ja507189vBarrabés, N.; Zhang, B.; Bürgi, T. J. Am. Chem. Soc. 2014, 136, 14361. doi: 10.1021/ja507189v
21. [21]
  Negishi, Y.; Kurashige, W.; Niihori, Y.; Iwasab, T.; Nobusada, K. Phys. Chem. Chem. Phys. 2010, 12, 6219. doi: 10.1039/b927175aNegishi, Y.; Kurashige, W.; Niihori, Y.; Iwasab, T.; Nobusada, K. Phys. Chem. Chem. Phys. 2010, 12, 6219. doi: 10.1039/b927175a
22. [22]
  Qian, H.; Jiang, D.; Li, G.; Gayathri, C.; Das, A.; Gil, R.; Jin, R. J. Am. Chem. Soc. 2012, 134, 16159. doi: 10.1021/ja307657a
23. [23]
  Yang, H.; Wang, Y.; Yan, J.; Chen, X.; Zhang, X.; Häkkinen, H.; Zheng, N. J. Am. Chem. Soc. 2014, 136, 7197. doi: 10.1021/ja501811jYang, H.; Wang, Y.; Yan, J.; Chen, X.; Zhang, X.; Häkkinen, H.; Zheng, N. J. Am. Chem. Soc. 2014, 136, 7197. doi: 10.1021/ja501811j
24. [24]
  Yang, H.; Wang, Y.; Lei, J.; Shi, L.; Wu, X.; Zheng, N. J. Am. Chem. Soc. 2013, 135, 9568. doi: 10.1021/ja402249sYang, H.; Wang, Y.; Lei, J.; Shi, L.; Wu, X.; Zheng, N. J. Am. Chem. Soc. 2013, 135, 9568. doi: 10.1021/ja402249s
25. [25]
  Kazan, R.; Zhang, B.; Bürgi, T. Dalton Trans. 2017, 46, 7708. doi: 10.1039/c7dt00955kKazan, R.; Zhang, B.; Bürgi, T. Dalton Trans. 2017, 46, 7708. doi: 10.1039/c7dt00955k
26. [26]
  Wan, X.; Cheng, X.; Tang, Q.; Han, Y.; Hu, G.; Jiang, D.; Wang, Q. J. Am. Chem. Soc. 2017, 139, 9451. doi: 10.1021/jacs.7b04622Wan, X.; Cheng, X.; Tang, Q.; Han, Y.; Hu, G.; Jiang, D.; Wang, Q. J. Am. Chem. Soc. 2017, 139, 9451. doi: 10.1021/jacs.7b04622
27. [27]
  Yan, J.; Su, H.; Yang, H.; Yang, H.; Malola, S.; Zheng, N. J. Am. Chem. Soc.2015, 137, 11880. doi: 10.1021/jacs.5b07186
28. [28]
  Liu, X.; Yuan, J.; Yao, C.; Chen, J.; Li, L.; Bao, X.; Yang, J.; Wu, Z. J. Phys. Chem. C. 2017, 121, 13848. doi: 10.1021/acs.jpcc.7b01730Liu, X.; Yuan, J.; Yao, C.; Chen, J.; Li, L.; Bao, X.; Yang, J.; Wu, Z. J. Phys. Chem. C. 2017, 121, 13848. doi: 10.1021/acs.jpcc.7b01730
29. [29]
  Kang, X.; Zhou, M.; Wang, S.; Jin, S.; Sun, G.; Zhu, M.; Jin, R. Chem. Sci. 2017, 8, 2581. doi: 10.1039/C6SC05104AKang, X.; Zhou, M.; Wang, S.; Jin, S.; Sun, G.; Zhu, M.; Jin, R. Chem. Sci. 2017, 8, 2581. doi: 10.1039/C6SC05104A
30. [30]
  Yan, J.; Su, H.; Yang, H.; Hu, C.; Malola, S.; Lin, S.; Teo, B.; Häkkinen, H.; Zheng, N. J. Am. Chem. Soc. 2016, 138, 12751. doi: 10.1021/jacs.6b08100
31. [31]
  Biltek, S.; Mandal, S.; Sen, A.; Reber, A.; Pedicini, A.; Khanna, S. J. Am. Chem. Soc. 2013, 135, 26. doi: 10.1021/ja308884s
32. [32]
  He, J.; Sheng, H.; Schilling, P.; Ma, E. Phys. Rev. Lett. 2001, 86, 2826. doi: 10.1103/PhysRevLett.86.2826
33. [33]
  Liu, Y.; Jordan, R.; Qiu, S. Phys. Rev. B 1994, 49, 4478. doi: 10.1103/PhysRevB.49.4478
34. [34]
  Michalet, X.; Pinaud, F.; Bentolila, L.; Tsay, J.; Doose, S.; Li, J.; Sundaresan, G.; Wu, A.; Gambhir, S.; Weiss, S. Science 2005, 307, 538. doi: 10.1126/science.1104274
35. [35]
  Rapallo, A.; Rossi, G.; Ferrando, R. J. Chem. Phys.2005, 122, 194308. doi: 10.1063/1.1898223Rapallo, A.; Rossi, G.; Ferrando, R. J. Chem. Phys.2005, 122, 194308. doi: 10.1063/1.1898223
36. [36]
  Kumar, A.; Damle, C.; Sastrya, M. Appl. Phys. Lett. 2001, 79, 3314. doi: 10.1063/1.1414298Kumar, A.; Damle, C.; Sastrya, M. Appl. Phys. Lett. 2001, 79, 3314. doi: 10.1063/1.1414298
37. [37]
  Biltek, S.; Sen, A.; Pedicini, A.; Reber, A.; Khanna, S. J. Phys. Chem. A 2014, 118, 8314. doi: 10.1021/la025586c
38. [38]
  Chowdari, B. V. R.; Mok, K, F.; Xie, J. M.; Gopalakrishnan, R. J. Non-Cryst. Solids 1993, 160, 73. doi: 10.1016/0022-3093(93)90286-7
39. [39]
  Khawaja, E.; Salim, M.; Khan, M.; Khattak, G.; Hussain, J. Non-Cryst. Solids 1989, 110, 33. doi: 10.1016/0022-3093(89)90179-8
40. [40]
  Marcus, P.; Grimal, J. Corros. Sci. 1992, 33, 805. doi: 10.1016/0010-938X(92)90113-H

扫一扫看文章

计量

PDF下载量: 9
文章访问数: 1062
HTML全文浏览量: 187

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

银镍合金团簇Ag₄Ni₂(SPhMe₂)₈ (SPhMe₂ = 2, 4-二甲基苯硫酚)的合成及其结构表征

通讯作者: 胡大乔, hudaqiao@ahu.edu.cn
汪恕欣, ixing@ahu.edu.cn
朱满洲, zmz@ahu.edu.cn

English

Synthesis and Structure Determination of Ag-Ni Alloy Nanocluster Ag₄Ni₂(SPhMe₂)₈ (SPhMe₂ = 2, 4-dimethylbenzenethiol)

Corresponding author: HU Daqiao, hudaqiao@ahu.edu.cn WANG Shuxin, ixing@ahu.edu.cn ZHU Manzhou, zmz@ahu.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

银镍合金团簇Ag4Ni2(SPhMe2)8 (SPhMe2 = 2, 4-二甲基苯硫酚)的合成及其结构表征

通讯作者: 胡大乔, hudaqiao@ahu.edu.cn 汪恕欣, ixing@ahu.edu.cn 朱满洲, zmz@ahu.edu.cn

English