基于Li0.35Zn0.3Fe2.35O4和碳纳米纤维双层吸波体的结构设计与吸收性能研究

引用本文: 向军, 张雄辉, 叶芹, 李佳乐, 黄滔, 沈湘黔. 基于Li_0.35Zn_0.3Fe_2.35O₄和碳纳米纤维双层吸波体的结构设计与吸收性能研究[J]. 无机化学学报, 2014, 30(4): 845-852. doi: 10.11862/CJIC.2014.090 shu

Citation: XIANG Jun, ZHANG Xiong-Hui, YE Qin, LI Jia-Le, HUANG Tao, SHEN Xiang-Qian. Structural Design and Absorption Properties of Double-Layer Microwave Absorbers Based on Li_0.35Zn_0.3Fe_2.35O₄ and Carbon Nanofibers[J]. Chinese Journal of Inorganic Chemistry, 2014, 30(4): 845-852. doi: 10.11862/CJIC.2014.090 shu

基于Li_0.35Zn_0.3Fe_2.35O₄和碳纳米纤维双层吸波体的结构设计与吸收性能研究

向军 ^{1,
,} ,
张雄辉 ^1, ,
叶芹 ^1, ,
李佳乐 ^1, ,
黄滔 ^1, ,
沈湘黔 ^2,

通讯作者: 向军 junx93@sina.com

基金项目:
中国博士后科学基金(No.2013M540418)；江苏省高校自然科学基金(No.11KJB430006)；江苏省博士后科研资助计划(No.1301055B)；江苏省“青蓝工程”资助项目。 (No.2013M540418)；江苏省高校自然科学基金(No.11KJB430006)；江苏省博士后科研资助计划(No.1301055B)

摘要: 通过静电纺丝技术和热处理制备了Li_0.35Zn_0.3Fe_2.35O₄纳米纤维和碳纳米纤维,并将它们各自均匀分散在硅橡胶基质中,测量了相应复合体在2~18GHz频率范围内的相对复介电常数和复磁导率,并根据传输线理论评估了由它们所构成的单层和双层结构吸波体的微波吸收特性。结果显示由于Li_0.35Zn_0.3Fe_2.35O₄纳米纤维与碳纳米纤维的电磁特性的有机结合,双层吸波体的微波吸收性能明显优于同厚度的单层吸波体。当以厚为1.8mm的Li_0.35Zn_0.3Fe_2.35O₄纳米纤维/硅橡胶复合体为吸收层和厚为0.2mm的碳纳米纤维/硅橡胶复合体为匹配层时,双层吸波体的反射率在13.9GHz达到一个最小值-47.8dB,反射率低于-10dB的吸收带宽为8.8GHz,频率范围为9.2~18GHz,反射率小于-20dB的频率范围为11.5~18GHz,带宽为6.5GHz,覆盖整个Ku波段。优化设计的双层吸波体有望作为一种轻质高效的Ku波段微波吸收材料。

关键词:

Li-Zn铁氧体纳米纤维;碳纳米纤维;双层吸波体;微波吸收性能

English

Structural Design and Absorption Properties of Double-Layer Microwave Absorbers Based on Li_0.35Zn_0.3Fe_2.35O₄ and Carbon Nanofibers

1.
1 School of Mathematics and physics, Jiangsu University of Science and Technology, Zhenjiang, Jiangsu 212003, China;

Corresponding author: 向军 junx93@sina.com

Received Date: 17 September 2013
Fund Project:
中国博士后科学基金(No.2013M540418)；江苏省高校自然科学基金(No.11KJB430006)；江苏省博士后科研资助计划(No.1301055B)；江苏省“青蓝工程”资助项目。

Abstract: Li_0.35Zn_0.3Fe_2.35O₄ and carbon nanofibers with average diameters of 160 and 360 nm, respectively, were fabricated by electrospinning technique combined with subsequent heat treatment. By dispersing the nanofibers homogeneously into a silicone rubber matrix, the relative complex permittivity and permeability of the composites containing either 60wt% Li_0.35Zn_0.3Fe_2.35O₄ nanofibers or 5wt% carbon nanofibers as fillers were measured in the frequency range of 2~18 GHz. Electromagnetic wave absorbing performance of both single-layer and double-layer microwave absorbers was evaluated according to transmission line theory. It is found that the double-layer absorbers have much better microwave absorption properties than the single-layer absorbers with the same thickness due to the proper combination of the electromagnetic characteristics resulting from the magnetic Li_0.35Zn_0.3Fe_2.35O₄ nanofibers and dielectric carbon nanofibers. When the absorbing layer is the Li_0.35Zn_0.3Fe_2.35O₄ nanofibers/silicone rubber composite with a thickness of 1.8 mm and the matching layer is the carbon nanofibers/silicone rubber composite with a thickness of 0.2 mm, the refection loss (RL) of the double-layer absorber reaches a minimum value of -47.8 dBat around 13.9 GHz and the absorption bandwidth with the RLvalue below -10 dBis about 8.8 GHz ranging from 9.2~18 GHz. Meanwhile, the RLvalue exceeding -20 dBis obtained over the range of 11.5~18 GHz, which covers the whole Ku-band. The results indicate that the optimal double-layer microwave absorbers can be a promising candidate for lightweight and highly effective microwave absorption materials in Ku-band.

Key words:

Li-Zn ferrite nanofiber;carbon nanofiber;double-layer absorber;microwave absorbing performance

1. [1] Guan P F, Zhang X F, Guo J J. Appl. Phys. Lett., 2012, 101: 153108[1] Guan P F, Zhang X F, Guo J J. Appl. Phys. Lett., 2012, 101: 153108
2. [2] Zhu W M, Wang L, Zhao R, et al. Nanoscale, 2011, 3:2862-2864[2] Zhu W M, Wang L, Zhao R, et al. Nanoscale, 2011, 3:2862-2864
3. [3] YU Mei(于美), LIU Peng-Rui(刘鹏瑞), LIU Jian-Hua(刘建华), et al. Chinese J. Inorg. Chem.(无机化学学报), 2011, 27 (9):1743-1747[3] YU Mei(于美), LIU Peng-Rui(刘鹏瑞), LIU Jian-Hua(刘建华), et al. Chinese J. Inorg. Chem.(无机化学学报), 2011, 27 (9):1743-1747
4. [4] Wen F S, Zhang F, Liu Z Y. J. Phys. Chem. C, 2011, 115: 14025-14030[4] Wen F S, Zhang F, Liu Z Y. J. Phys. Chem. C, 2011, 115: 14025-14030
5. [5] Liu Y, Zhang Z Q, Xiao S T, et al. Appl. Surf. Sci., 2011, 257:7678-7683[5] Liu Y, Zhang Z Q, Xiao S T, et al. Appl. Surf. Sci., 2011, 257:7678-7683
6. [6] Park K Y, Han J H, Lee S B, et al. Compos. Sci. Technol., 2009, 69:1271-1278[6] Park K Y, Han J H, Lee S B, et al. Compos. Sci. Technol., 2009, 69:1271-1278
7. [7] CHEN Xue-Gang(陈雪刚), YE Ying(叶瑛), CHENG Ji-Peng (程继鹏). J. Inorg. Mater.(无机材料学报), 2011, 26(5):449-457[7] CHEN Xue-Gang(陈雪刚), YE Ying(叶瑛), CHENG Ji-Peng (程继鹏). J. Inorg. Mater.(无机材料学报), 2011, 26(5):449-457
8. [8] Wei C Y, Shen X Q, Song F Z, et al. Mater. Des., 2012, 35: 363-368[8] Wei C Y, Shen X Q, Song F Z, et al. Mater. Des., 2012, 35: 363-368
9. [9] Shen G Z, Xu M, Xu Z. Mater. Chem. Phys., 2007, 105:268-272[9] Shen G Z, Xu M, Xu Z. Mater. Chem. Phys., 2007, 105:268-272
10. [10] Guo S L, Wang L D, Wang Y M, et al. Chin. Phys. B, 2013, 22:044101[10] Guo S L, Wang L D, Wang Y M, et al. Chin. Phys. B, 2013, 22:044101
11. [11] Wang M, Duan Y P, Liu S H, et al. J. Magn. Magn. Mater., 2009, 321:3442-3446[11] Wang M, Duan Y P, Liu S H, et al. J. Magn. Magn. Mater., 2009, 321:3442-3446
12. [12] Duan Y B, Wang L, Liu Z, et al. Plast. Rubber Compos., 2013, 42:82-87[12] Duan Y B, Wang L, Liu Z, et al. Plast. Rubber Compos., 2013, 42:82-87
13. [13] Wang T, Qiao L, Han R, et al. J. Magn. Magn. Mater., 2012, 324:3209-3212[13] Wang T, Qiao L, Han R, et al. J. Magn. Magn. Mater., 2012, 324:3209-3212
14. [14] Wu H J, Wang L D, Guo S L, et al. Appl. Phys. A, 2012, 108:439-446[14] Wu H J, Wang L D, Guo S L, et al. Appl. Phys. A, 2012, 108:439-446
15. [15] Liu J R, Itoh M, Machida K I. Appl. Phys. Lett., 2006, 88: 062503[15] Liu J R, Itoh M, Machida K I. Appl. Phys. Lett., 2006, 88: 062503
16. [16] JIANG Hong(江红), GUO Jia(郭佳), ZHAO Lu(赵璐), et al. J. Inorg. Mater.(无机材料学报), 2010, 25(1):73-76[16] JIANG Hong(江红), GUO Jia(郭佳), ZHAO Lu(赵璐), et al. J. Inorg. Mater.(无机材料学报), 2010, 25(1):73-76
17. [17] Zhen L, Gong X Y, Jiang J T, et al. J. Appl. Phys., 2009, 104:034312[17] Zhen L, Gong X Y, Jiang J T, et al. J. Appl. Phys., 2009, 104:034312
18. [18] XIANG Jun(向军), CHU Yan-Qiu(褚艳秋), ZHOU Guang-Zhen(周广振), et al. Acta Chim. Sinica(化学学报), 2011, 69 (20):2457-2464[18] XIANG Jun(向军), CHU Yan-Qiu(褚艳秋), ZHOU Guang-Zhen(周广振), et al. Acta Chim. Sinica(化学学报), 2011, 69 (20):2457-2464
19. [19] Zhao D L, Lü Q, Shen Z M. J. Alloys Compd., 2009, 480: 634-638[19] Zhao D L, Lü Q, Shen Z M. J. Alloys Compd., 2009, 480: 634-638
20. [20] ZHANG Cai-Hong(张彩红), SHENG Yi(盛毅), TIAN Hong (田红), et al. Acta Phys. Sinica(物理学报), 2011, 60(3): 036101[20] ZHANG Cai-Hong(张彩红), SHENG Yi(盛毅), TIAN Hong (田红), et al. Acta Phys. Sinica(物理学报), 2011, 60(3): 036101
21. [21] SHEN Guo-Zhu(沈国柱), XU Zheng(徐政), ZHANG Xian-Ru(张先如). J. Tongji Univ.: Nat. Sci.(同济大学学报:自然科学版), 2008, 36(3):379-382[21] SHEN Guo-Zhu(沈国柱), XU Zheng(徐政), ZHANG Xian-Ru(张先如). J. Tongji Univ.: Nat. Sci.(同济大学学报:自然科学版), 2008, 36(3):379-382
22. [22] Lu B, Huang H, Dong X L, et al. J. Appl. Phys., 2008, 104: 114313[22] Lu B, Huang H, Dong X L, et al. J. Appl. Phys., 2008, 104: 114313

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 460
HTML全文浏览量: 46

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

基于Li_0.35Zn_0.3Fe_2.35O₄和碳纳米纤维双层吸波体的结构设计与吸收性能研究

通讯作者: 向军 junx93@sina.com

English

Structural Design and Absorption Properties of Double-Layer Microwave Absorbers Based on Li_0.35Zn_0.3Fe_2.35O₄ and Carbon Nanofibers

Corresponding author: 向军 junx93@sina.com

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处