超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

引用本文: 董澎, 王柯, 李军方, 傅强. 超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响[J]. 高分子学报, 2020, 51(1): 117-124. doi: 10.11777/j.issn1000-3304.2020.19159 shu

Citation: Peng Dong, Ke Wang, Jun-fang Li, Qiang Fu. Chain Entanglement Regulation of Sintered Ultrahigh Molecular Weight Polyethylene and Its Effect on Properties[J]. Acta Polymerica Sinica, 2020, 51(1): 117-124. doi: 10.11777/j.issn1000-3304.2020.19159 shu

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

董澎 ^1, ,
王柯 ^1, ,
李军方 ^2, ,
傅强 ^{1,
,}

1.
四川大学高分子科学与工程学院高分子材料工程国家重点实验室　成都 610065
2.
中国科学院上海有机化学研究所金属有机化学国家重点实验室　上海 200032

通讯作者: E-mail: qiangfu@scu.edu.cn

摘要: 利用新的单中心Ziegler-Natta (Z-N)催化剂，通过干预分子链的生长与聚集行为，可获得低缠结的超高分子量聚乙烯(UHMWPE)初生树脂. 本研究利用这类低缠结UHMWPE，通过设置不同的烧结温度(T_s)来改变熔体缠结状态，并探讨了链缠结程度对烧结制品结构与性能的影响. 实验结果表明T_s = 220 °C下，UHMWPE样品发生显著的复缠，造成高缠结度；而T_s = 170 °C下，初始低缠结状态能够得以充分保留，从而获得了缠结度具有明显差别的不同样品. 示差扫描量热法(DSC)测试表明，在T_s = 170 °C下，低缠结度有利于在随后等温及冷却结晶过程中生成高熔点(最高达141 °C)晶体与高的结晶度(最高达65%). 力学测试表明低缠结度制品的综合力学性能显著提升，其中屈服强度提高72%，拉伸断裂强度提升139%，弹性模量提升162%以及断裂伸长率提升36%，实现了同时增强增韧. 这就提供了一种从调节链缠结温度实现UHMWPE烧结制品高性能化的新思路.

关键词:

English

Chain Entanglement Regulation of Sintered Ultrahigh Molecular Weight Polyethylene and Its Effect on Properties

Peng Dong ^1, ,
Ke Wang ^1, ,
Jun-fang Li ^2, ,
Qiang Fu ^{1,
,}

1.
State Key Laboratory of Polymer Materials Engineering, College of Polymer Science and Engineering, Sichuan University, Chengdu 610065
2.
State Key Laboratory of Organometallic Chemistry, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, Shanghai 200032

Corresponding author: Qiang Fu, E-mail: qiangfu@scu.edu.cn

Received Date: 29 August 2019
Revised Date: 16 October 2019
Available Online: 01 January 2020

Abstract: Ultrahigh molecular weight polyethylene (UHMWPE) shows outstanding toughness, wear resistance and chemical inertness as a high performance polymer. However, extremely high entanglement degree results in high viscosity and processing difficulties, which greatly limits the applications. To address this issue, the new single-site Z-N catalysts have been used to regulate the growth and cohesion of molecular chains during the polymerization of ethylene in recent years, by which nascent UHMWPE with low entanglement degree and excellent processing capability can be obtained. With such UHMWPE nascent powder, different sintering temperatures (T_s) of 170, 190 and 220 °C were set, respectively, then a isothermal crystallization step with precise temperature control was added, and the effect of chain entanglement on the structures and properties of sintered UHMWPE was investigated. Through the tensile tests at 160 °C, it was confirmed that UHMWPE chains significantly reentangled when T_s = 220 °C, resulting in high degree of entanglement; while the initial low entanglement state can be sufficiently reserved when T_s = 170 °C, M_e reached 12.3 kg/mol. Therefore, the samples with distinct different entanglement states can be obtained. DSC results have shown that low entanglement degree was beneficial to the formation of crystal lamellae with higher melting temperature (up to 141 °C) and high crystallinity (up to 65%) through isothermal crystallization steps, which was close to the level of nascent UHMWPE powder. Moreover, it proved that the integrated mechanical performance of the product sintered at 170 °C was significantly improved. The yield strength was increased by up to 72%, the tensile strength by 139%, the elastic modulus by 162%, and the elongation at break by 36%, realizing simultaneously strengthening and toughening of sintered UHMWPE materials. This provides a new strategy for the high performance UHMWPE sintered products from the perspective of chain entanglement regulation.

Key words:

1. [1]
  Zuo J D, Zhu Y M, Liu S M, Jiang Z J, Zhao J Q. Polym Bull, 2007, 58(4): 711 − 722 doi: 10.1007/s00289-006-0711-3
2. [2]
  Jacobs, Joshua J. J Bone Joint Surg, 2004, 87(8): 1906 − 1906
3. [3]
  Tian M, Tao Z, Gao P G, Zhang J C. Chinese Sci Bull, 2013, 58(8): 945 − 948 doi: 10.1007/s11434-012-5555-7
4. [4]
  Liu X, Li M, Li X, Deng X, Zhang X, Yuan Y, Liu Y, Chen X. J Mater Sci, 2018, 53(9): 1 − 15
5. [5]
  Oonishi H, Kim S C, Kyomoto M, Masuda S, Asano T, Clarke I C. J Biomed Mater Res B, 2010, 74B(2): 754 − 759
6. [6]
  Ansari F, Gludovatz B, Kozak A, Ritchie R O, Pruitt L A. J Mech Behav of Biomed Mater, 2016, 60: 267 − 279 doi: 10.1016/j.jmbbm.2016.02.014
7. [7]
  Chen Dongyang(陈东洋), Liu Cheng(刘程), Wang Jinyan(王锦艳), Pan Chunyue(潘春跃), Yu Guiming(喻桂朋), Jian Xigao(蹇锡高). Acta Polymerica Sinica(高分子学报), 2018, (5): 559 − 570 doi: 10.11777/j.issn1000-3304.2017.17298
8. [8]
  Shen L, Peng M, Qiao F, Zhang J. Chinese J Polym Sci, 2008, 26(6): 653 − 657 doi: 10.1142/S0256767908003394
9. [9]
  Yu Junrong(于俊荣), Luan Xiuna(栾秀娜), Hu Zuming(胡祖明), Liu Zhaofeng(刘兆峰). Acta Polymerica Sinica(高分子学报), 2005, (5): 764 − 768 doi: 10.3321/j.issn:1000-3304.2005.05.024
10. [10]
  Qing Jianhua(秦建华), Zhang Zhong(张仲), Liu Chunhui(刘春晖), Gan Wenfeng(高文风). Plastics Science and Technology(塑料科技), 2009, 37(5): 56 − 58 doi: 10.3969/j.issn.1005-3360.2009.05.008
11. [11]
  Huang Y F, Xu J Z, Zhang Z C, Xu L, Li L B, Li J F, Li Z M. Chem Eng J, 2017, 315: 132 − 141 doi: 10.1016/j.cej.2016.12.133
12. [12]
  Truss R W, Han K S, Wallace J F, Geil P H. Polym Eng Sci, 1980, 20(11): 747 − 755 doi: 10.1002/pen.760201109
13. [13]
  Rezaei M, Ebrahimi N G, Kontopoulou M. Polym Eng Sci, 2010, 45(5): 678 − 686
14. [14]
  Hosseinnezhad R, Talebi S, Rezaei M. J Elastom Plast, 2017, 49(7): 609 − 629 doi: 10.1177/0095244316681833
15. [15]
  Gao P, Cheung M K, Leung T Y. Polymer, 1996, 37(15): 3265 − 3272 doi: 10.1016/0032-3861(96)88472-2
16. [16]
  Kim Y H, Wool R P. Macromolecules, 1983, 16(7): 1115 − 1120 doi: 10.1021/ma00241a013
17. [17]
  Halldin G W, Kamel I A L. Polym Eng Sci, 2010, 17(1): 21 − 26
18. [18]
  Deplancke T, Lame O, Rousset F, Aguili I, Seguela R, Vigier G. Macromolecules, 2013, 47(1): 197 − 207
19. [19]
  Deplancke T, Lame O, Rousset F, Seguela R, Vigier G. Macromolecules, 2015, 48(15): 5328 − 5338 doi: 10.1021/acs.macromol.5b00618
20. [20]
  Kennedy M A, Peacock A J, Mandelkern L. Macromolecules, 1994, 27(19): 5297 − 5310 doi: 10.1021/ma00097a009
21. [21]
  Pang Y, Xia D, Zhang X, Liu K, Chen E, Han C C, Wang D. Polymer, 2008, 49(10): 2568 − 2577 doi: 10.1016/j.polymer.2008.03.050
22. [22]
  Parasnis N, Ramani K. J Mater Sci-Mater M, 1998, 9(3): 165 − 172 doi: 10.1023/A:1008871720389
23. [23]
  Brooks N W, Ghazali M, Duckett R A, Unwin A P, Ward I M. Polymer, 1998, 40(4): 821 − 825
24. [24]
  Humbert S, Lame O, Vigier G. Polymer, 2009, 50(15): 3755 − 3761 doi: 10.1016/j.polymer.2009.05.017
25. [25]
  Rastogi S, Spoelstra A B, Goossens J G P, Lemstra P J. Macromolecules, 1999, 30(25): 7880 − 7889
26. [26]
  Wang Yiren(王一任), Fan Zhongyong(范仲勇), Yu Ying(于瀛), Bu Haishan(卜海山). Journal of Fudan University (Natural Science)(复旦学报: 自然科学版), 2002, 41(4): 365 − 369
27. [27]
  Liu Tianyu(刘天宇), Jiang Weijiao(蒋维娇), Yang Weixing(杨卫星), Zhang Qin(张琴), Fu Qiang(傅强). Acta Polymerica Sinica(高分子学报), 2018, (8): 1107 − 1115 doi: 10.11777/j.issn1000-3304.2018.18053
28. [28]
  Jin Y L, Liu L, Wang Y J, Liu Z, Liu B P. Chinese J Polym Sci, 2019, 37: 995 − 1004 doi: 10.1007/s10118-019-2295-z
29. [29]
  Pandey A, Champouret Y, Rastogi S. Macromolecules, 2011, 44(12): 4952 − 4960 doi: 10.1021/ma2003689
30. [30]
  Tuskaev V A, Gagieva S C, Kurmaev D A, Vasil’ev V G, Kolosov N A, Zubkevich S V, Mikhaylik E S, Golubev E K, Nikiforova G G, Zhizhko P A. Chinese J Polym Sci, 2018, 37(5): 471 − 477
31. [31]
  Liu K, de Boer E L, Yao Y, Romano D, Ronca S, Rastogi S. Macromolecules, 2016, 49(19): 7497 − 7509 doi: 10.1021/acs.macromol.6b01173
32. [32]
  Rastogi S, Lippits D R, Peters G W, Graf R, Yao Y, Spiess H W. Nat Mater, 2005, 4(8): 635 − 641 doi: 10.1038/nmat1437
33. [33]
  Sun Xiuli(孙秀丽), Tang Yong(唐勇). Acta Polymerica Sinica(高分子学报), 2017, (7): 1019 − 1037 doi: 10.11777/j.issn1000-3304.2017.17033
34. [34]
  Deplancke T, Lame O, Barrau S, Ravi K, Dalmas F. Polymer, 2017, 111: 204 − 213
35. [35]
  Bellehumeur C T, Bisaria M K, Vlachopoulos J. Polym Eng Sci, 1996, 36(17): 2198 − 2207 doi: 10.1002/pen.10617
36. [36]
  Wunderlich B, Cormier C. J Polym Sci, Part B: Polym Phys, 1967, 5(5): 987 − 988 doi: 10.1002/pol.1967.160050514
37. [37]
  Xue Y Q, Tervoort T A, Lemstra P J. Macromolecules, 1998, 31(9): 3075 − 3080 doi: 10.1021/ma970544u
38. [38]
  Treloar L R G, Montgomery D J. The Physics of Rubber Elasticity. Oxford: Clarendon Press, 1958. 80 − 99
39. [39]
  de Gennes P G. C R Acad Sci Ser IIb-Mec Phys Chim Astron, 1995, 321: 363 − 365

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 2640
HTML全文浏览量: 368

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

通讯作者: E-mail: qiangfu@scu.edu.cn

English

Chain Entanglement Regulation of Sintered Ultrahigh Molecular Weight Polyethylene and Its Effect on Properties

Corresponding author: Qiang Fu, E-mail: qiangfu@scu.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

通讯作者: E-mail: qiangfu@scu.edu.cn

English

Chain Entanglement Regulation of Sintered Ultrahigh Molecular Weight Polyethylene and Its Effect on Properties

Corresponding author: Qiang Fu, E-mail: qiangfu@scu.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs