Fabrication and Characterization of Chitosan-Silk Fibroin/Hydroxyapatite Composites via in situ Precipitation for Bone Tissue Engineering

Jing-xiao Hu Xuan Cai Shao-bo Mo Li Chen Xin-yu Shen Hua Tong

Citation:  Jing-xiao Hu, Xuan Cai, Shao-bo Mo, Li Chen, Xin-yu Shen, Hua Tong. Fabrication and Characterization of Chitosan-Silk Fibroin/Hydroxyapatite Composites via in situ Precipitation for Bone Tissue Engineering[J]. Chinese Journal of Polymer Science, 2015, 33(12): 1661-1671. doi: 10.1007/s10118-015-1710-3 shu

Fabrication and Characterization of Chitosan-Silk Fibroin/Hydroxyapatite Composites via in situ Precipitation for Bone Tissue Engineering

    通讯作者: Hua Tong,
  • 基金项目:

    This work was financially supported by the National Natural Science Foundation of China(Nos.31071265 and 30900297).

摘要: Homogeneous chitosan-silk fibroin/hydroxyapatite(CS-SF/HA) composites were prepared by in situ precipitation method driven by a multiple-order template. The morphology of the composites was investigated by scanning electron microscope(SEM) and transmission electron microscope(TEM). The compositional analysis was carried out by X-ray diffraction analysis(XRD) and Fourier transformed infrared spectroscopy(FTIR). The mechanical properties and biocompatibility of the composites were also determined. The results indicated that the inorganic particles of uniform size(50 nm) were well-dispersed among the CS-SF matrices. The compressive modulus of the CS-SF/HA composites was enhanced with the increasing amount of SF. The in vitro results suggested that the MC3T3-E1 osteoblast-like cells on CS-SF/HA composite disks displayed strong bonding and spreading, and the cell proliferation cultured on each composite disk increased throughout the culture period for up to 7 days. Especially, the samples with higher content of SF had much better biological properties. The evidences proved that the CS-SF/HA composites possessed excellent biocompatibility. By using the freeze-drying technique, hierarchical porous scaffolds with pores ranging from 50m to 200m were obtained. This work presented the advantages of in situ precipitation method to prepare the organic/inorganic composites, and a multiple-order template was introduced in the system to improve the properties of the composites by combining the merits of each organic template.

English

  • 
    1. [1]

      Wang, X.D., Bank, R.A., TeKoppele, J.M. and Agrawal, C.M., J. Orthop. Res., 2001, 19(6):1021

    2. [2]

      Wu, S.L., Liu, X.M., Yeung, K.W.K., Liu, C.S. and Yang, X.J., Mat. Sci. Eng., R:Reports, 2014, 80:1

    3. [3]

      Gelinsky, M., Welzel, P.B., Simon, P., Bernhardt, A. and Konig, U., Chem. Eng. J., 2008, 137(1):84

    4. [4]

      Zhang, Y. and Lu, J., Cryst. Growth Des., 2008, 8(7):2101

    5. [5]

      Liu, L., Liu, J.Y., Kong, X.D., Cai, Y.R. and Yao, J.M., Polym. Adv. Technol., 2011, 22(6):909

    6. [6]

      Dadsetan, M., Guda, T., Runge, M.B., Mijares, D., LeGeros, R.Z., LeGeros, J.P., Silliman, D.T., Lu, L.C., Wenke, J.C., Baer, P.R.B. and Yaszemski, M.J., Acta Biomater., 2015, 18:9

    7. [7]

      Cirillo, B., Morra, M.and Catapano, G., Int. J. Artif. Organs, 2004, 27(1):60

    8. [8]

      Rodrigues, S.C., Salgado, C.L., Sahu, A., Garcia, M.P., Fernandes, M.H. and Monteiro, F.J., J. Biomed. Mater. Res., Part A., 2013, 101(4):1080

    9. [9]

      Gong, H., Agustin, J., Wootton, D. and Zhou, J.G., J. Mater. Sci:Mater. Med., 2014, 25(1):113

    10. [10]

      Swetha, M., Sahithi, K., Moorthi, A., Srinivasan, N., Ramasamy, K. and Selvamurugan, N., Int. J. Biol. Macromol., 2010, 47(1):1

    11. [11]

      Hartwell, R., Leung, V., Chavez-Munoz, C., Nabai, L., Yang, H., Ko, F. and Ghahary, A., Acta Biomater., 2011, 7(8):3060

    12. [12]

      Zadegan, S., Hosainalipour, M., Rezaie, H.R., Ghassai, H. and Shokrgozar, M.A., Mater. Sci. Eng., C:Mater. Biol. Appl., 2011, 31(5):954

    13. [13]

      Deng, H.B., Zhou, X., Wang, X.Y., Zhang, C.Y., Ding, B., Zhang, Q.H. and Du, Y.M., Carbohydr. Polym., 2010, 80(2):474

    14. [14]

      He, J., Cheng, Y., Li, P., Zhang, Y., Zhang, H. and Cui, S., Iran Polym. J., 2013, 22(7):537

    15. [15]

      Meinel, L., Fajardo, R., Hofmann, S., Langer, R., Chen, J., Snyder, B., Vunjak-Novakovic, G. and Kaplan, D., Bone, 2005, 37(5):688

    16. [16]

      Wei, K., Li, Y., Kim, K.O., Nakagawa, Y., Kim, B.S., Abe, K., Chen, G.Q. and Kim, I.S., J. Biomed. Mater. Res., Part A, 2011, 97A(3):272

    17. [17]

      Meinel, L., Hofmann, S., Karageorgiou, V., Kirker-Head, C., McCool, J., Gronowicz, G., Zichner, L., Langer, R., Vunjak-Novakovic, G. and Kaplan, D.L., Biomaterials, 2005, 26(2):147

    18. [18]

      Li, W., Li, X.Y., Li, W., Wang, T., Li, X.X., Pan, S.Y. and Deng, H.B., Eur. Polym. J., 2012, 48(11):1846

    19. [19]

      Aguzzi, C., Sandri, G., Bonferoni, C., Cerezo, P., Rossi, S., Ferrari, F., Caramella, C. and Viseras, C., Colloid Surf., B:Biointerfaces., 2014, 113:152

    20. [20]

      Kim, K.H., Jeong, L., Park, H.N., Shin, S.Y., Park, W.H., Lee, S.C., Kim, T.I., Park, Y.J., Seol, Y.J., Lee, Y.M., Ku, Y., Rhyu, I.C., Han, S.B. and Chung, C.P., J. Biotechnol., 2005, 120(3):327

    21. [21]

      Park, W.H., Jeong, L., Yoo, D.I. and Hudson, S., Polymer, 2004, 45(21):7151

    22. [22]

      Zhang, Y., Cao, C.B., Lu, Q., Ma, X.L. and Zhu, H.S., Acta Polymerica Sinica(in Chinese), 2004,(4):556

    23. [23]

      Yamaguchi, I., Tokuchi, K., Fukuzaki, H., Koyama, Y., Takakuda, K., Monma, H. and Tanaka, T., J. Biomed. Mater. Res., 2001, 55(1):20

    24. [24]

      Li, G.Y., Zhou, P., Sun, Y.J., Yao, W.H., Mi, Y., Yoa, H.Y., Shao, Z.Z. and Yu, T.Y., Chem. J. Chinese Univ-Chinese(in Chinese), 2001, 22(5):860

    25. [25]

      Mobini, S., Hoyer, B., Solati-Hashjin, M., Lode, A., Nosoudi, N., Samadikuchaksaraei, A. and Gelinsky, M., J. Biomed. Mater. Res., Part A, 2013, 101A(8):2392

    26. [26]

      Koshkaki, M., Ghassai, H., Khavandi, A., Seyfoori, A. and Molazemhosseini, A., Iran Polym. J., 2013, 22(9):653

  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  1325
  • HTML全文浏览量:  54
文章相关
  • 发布日期:  2015-12-05
  • 收稿日期:  2015-05-06
  • 修回日期:  2015-05-27
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章