Asymmetric Ni/PVC Films for High-performance Electromagnetic Interference Shielding

Yang Zhang Xiao-xia Fang Bian-ying Wen

Citation:  Yang Zhang, Xiao-xia Fang, Bian-ying Wen. Asymmetric Ni/PVC Films for High-performance Electromagnetic Interference Shielding[J]. Chinese Journal of Polymer Science, 2015, 33(6): 899-907. doi: 10.1007/s10118-015-1641-z shu

Asymmetric Ni/PVC Films for High-performance Electromagnetic Interference Shielding

  • 基金项目:

    This work was financially supported by the National Natural Science Foundation of China (Nos. 21274007 and 51021064), the Project of Science and Technology Innovation Platform of Beijing Municipal Education Commission (No. PXM2012-014213-000025), the Tribology Science Fund of State Key Laboratory of Tribology (No. SKLTKF12A10) and Beijing Technology and Business University Natural Science Youth Foundation (No. QNJJ2012-29).

摘要: A novel asymmetric Ni/PVC film has been developed by solution casting method. The structure, electrical conductivity, electromagnetic interference (EMI) shielding, and impact resistance were investigated. The results showed that the Ni particles were asymmetrically distributed along the thickness direction in the film. The top surface resistivity increased with film thickness, while the bottom surface exhibited the different trend. EMI shielding effectiveness (SE) depended on formation of closed packed conductive Ni network, which was influenced by both Ni content and film thickness. A linear relationship was observed between EMI SE and film thickness. The films with lower Ni content showed the faster increasing rate of EMI SE with film thickness. Some of the films show appreciably high EMI SE ( 40 dB), indicating the promising application in EMI shielding field. Moreover, the films exhibit different impact performance under different impacting directions. All the experimental facts demonstrate that the asymmetric structure endows the film achieving high-performance EMI shielding function.

English

  • 
    1. [1]

      Wang, H.Q., Zhang, H.Y., Zhao, W.F., Zhang, W. and Chen, G.H., Compos. Sci. Technol., 2008, 68(1): 238

    2. [2]

      Dhawan, S.K., Singh, K., Bakhshi, A.K. and Ohlan, A., Synthetic. Met., 2009, 159(21~22): 2259

    3. [3]

      Oh, Y., Chun, K.Y., Lee, E., Kim, Y.J. and Baik, S., J. Mater. Chem., 2010, 20(18): 3579

    4. [4]

      Kumar, R., Dhakate, S.R., Saini, P. and Mathur, R.B., RSC Adv., 2013, 3(13): 4145

    5. [5]

      Kwon, S., Ma, R., Kim, U., Choi, H.R. and Baik, S., Carbon, 2014, 68: 118

    6. [6]

      Yang, S.Y., Lozano, K., Lomeli, A., Foltz, H.D. and Jones, R., Composites Part A, 2005, 36(5): 691

    7. [7]

      Zhang, L., Wang, L.B., See, K.Y. and Ma, J., J. Mater. Sci., 2013, 48(21): 7757

    8. [8]

      Li, N., Huang, Y., Du, F., He, X.B., Lin, X., Gao, H.J., Ma, Y.F., Li, F.F., Chen, Y.S. and Eklund, P.C., Nano Lett.,2006, 6(6): 1141

    9. [9]

      Chen, Z., Xu, C., Ma, C., Ren, W. and Cheng, H.M., Adv. Mater., 2013, 25(9): 1296

    10. [10]

      Hu, M., Gao, J., Dong, Y., Li, K., Shan, G., Yang, S. and Li, R.K.Y., Langmuir, 2012, 28(18): 7101

    11. [11]

      Song, W.L., Cao, M.S., Lu, M.M., Bi, S., Wang, C.Y., Liu, J., Yuan, J. and Fan, L.Z., Carbon, 2014, 66: 67

    12. [12]

      Zhou, H., Wang, J., Zhuang, J. and Liu, Q., Rsc Adv., 2013, 3(45): 23715

    13. [13]

      Hu, L.B., Hecht, D.S. and Gruner, G., Chem. Rev., 2010, 110(10): 5790

    14. [14]

      Wu, H., Gu, A., Liang, G. and Yuan, L., J. Mater. Chem., 2011, 21(38): 14838

    15. [15]

      Chung, T.S., Jiang, L.Y., Li, Y. and Kulprathipanja, S., Prog. Polym. Sci., 2007, 32(4): 483

    16. [16]

      Hung, W.S., De Guzman, M., Huang, S.H., Lee, K.R., Jean, Y.C. and Lai, J.Y., Macromolecules, 2010, 43(14): 6127

    17. [17]

      Peng, N., Widjojo, N., Sukitpaneenit, P., Teoh, M.M., Lipscomb, G.G., Chung, T.S. and Lai, J.Y., Prog. Polym. Sci.,2012, 37(10): 1401

    18. [18]

      Jang, J. and Han, S., Composites Part A, 1999, 30(9): 1045

    19. [19]

      Fan, Z., Yan, J., Wei, T., Zhi, L., Ning, G., Li, T. and Wei, F., Adv. Funct. Mater., 2011, 21(12): 2366

    20. [20]

      Wang, B., Qin, D., Liang, G., Gu, A., Liu, L. and Yuan, L., J. Phys. Chem. C, 2013, 117(30): 15487

    21. [21]

      Luo, W., Yao, H.M., Yang, P.H. and Chen, C.S., J. Am. Ceram. Soc., 2009, 92(11): 2682

    22. [22]

      Song, Y.H., Pan, Y., Zheng, Q. and Yi, X.S., J. Polym. Sci., Part B: Polym. Phys., 2000, 38(13): 1756

    23. [23]

      Billas, I.M., Chatelain, A. and de Heer, W.A., Science, 1994, 265(5179): 1682

    24. [24]

      Chung, D.D.L., Carbon, 2001, 39(2): 279

    25. [25]

      Lu, J.X., Moon, K.S., Xu, J.W. and Wong, C.P., J. Mater. Chem., 2006, 16(16): 1543

    26. [26]

      Yuen, S.M., Ma, C.C. M., Chuang, C.Y., Yu, K.C., Wu, S.Y., Yang, C.C. and Wei, M.H., Compos. Sci. Technol.,2008, 68(3~4): 963

    27. [27]

      Colaneri, N.F. and Schacklette, L.W., IEEE T. Instrum. Meas., 1992, 41(2): 291

    28. [28]

      Singh, B.P., Saini, K., Choudhary, V., Teotia, S., Pande, S., Saini, P. and Mathur, R.B., J. Nanopart. Res., 2013, 16(1): 1

    29. [29]

      Al-Saleh, M.H. and Sundararaj, U., Carbon, 2009, 47(7): 1738

    30. [30]

      Rahaman, M., Chaki, T.K. and Khastgir, D., J. Mater. Sci., 2011, 46(11): 3989

    31. [31]

      Basavaraja, C., Kim, W.J., Kim, Y.D. and Huh, D.S., Mater. Lett., 2011, 65(19~20): 3120

    32. [32]

      Nayak, L., Khastgir, D. and Chaki, T.K., J. Mater. Sci., 2013, 48(4): 1492

    33. [33]

      Rahaman, M., Chaki, T.K. and Khastgir, D., Polym. Compos., 2011, 32(11): 1790

    34. [34]

      Barany, T., Izer, A. and Karger-Kocsis, J., Polym. Test., 2009, 28(2): 176

  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  1149
  • HTML全文浏览量:  9
文章相关
  • 发布日期:  2015-06-05
  • 收稿日期:  2014-10-21
  • 修回日期:  2014-12-10
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章