English

• 
• 1. [1]

     Delebecq, E., Pascault, J.P., Boutevin, B. and Ganachaud, F., Chem. Rev., 2013, 113: 80

  2. [2]

     Ling, J., Rong, M.Z. and Zhang, M.Q., Chinese J. Polym. Sci., 2014, 32(10): 1286

  3. [3]

     Liu, C.C., Zhang, A.Y., Ye, L. and Feng, Z.G., Chinese J. Polym. Sci., 2013, 31(2): 251

  4. [4]

     Yu, R.L., Zhang, L.S., Feng, Y.H., Zhang, R.Y. and Zhu, J., Chinese J. Polym. Sci., 2014, 32(8): 1099

  5. [5]

     Guan, J., Song, Y.H., Lin, Y., Yin, X.Z., Zuo, M., Zhao, Y.H., Tao, X.L. and Zheng, Q., Ind. Eng. Chem. Res.,2011, 50: 6517

  6. [6]

     Ochiai, B. and Endo, T., Prog. Polym. Sci., 2005, 30: 183

  7. [7]

     Kathalewar, M.S., Joshi, P.B., Sabnis, A.S. and Malshe, V.C., RSC Adv., 2013, 3: 4110

  8. [8]

     Tamami, B., Sohn, S. and Wilkes, G.L., J. Appl. Polym. Sci., 2004, 92: 88

  9. [9]

     Brocas, A.L., Cendejas, G., Deffieux, A. and Carlotti, S., J. Polym. Sci., Part A: Polym. Chem., 2011, 49: 2677

  10. [10]

      Diakoumakos, C.D. and Kotzev, D.L., Macromol. Symp., 2004, 216: 37

  11. [11]

      Ochiai, B., Inoue, S. and Endo, T., J. Polym. Sci., Part A: Polym. Chem., 2005, 43: 6613

  12. [12]

      Annunziata, L., Diallo, A.K., Fouquay, S., Michaud, G., Simon, F., Brusson, J.M., Carpentier, J.F. and Guillaume, S.M., Green Chem., 2014, 16: 1947

  13. [13]

      Moritz, B., Alexandro, B. and Rolf, M., Green Chem., 2012, 14: 1447

  14. [14]

      Moritz, B. and Rolf, M., Green Chem., 2012, 14: 483

  15. [15]

      Besse, V., Auvergne. R., Carlotti, S., Boutevin, G., Otazaghine, B., Caillol, S., Pascault, J.P. and Boutevin, B., React. Funct. Polym., 2013, 73: 588

  16. [16]

      Maier, S., Loontjens, T., Scholtens, B. and Mulhaupt, R., Macromolecules, 2003, 36: 4727

  17. [17]

      Maier, S., Loontjens, T., Scholtens, B. and Mulhaupt, R., Angew. Chem. Int. Ed., 2003, 42: 5094

  18. [18]

      Zimmermann, J., Loontjens, T., Scholtens, B.J.R. and Mulhaupt, R., Biomaterials, 2004, 25: 2713

  19. [19]

      Tang, D.L., Mulder, D., Noordover, B.A.J. and Koning, C.E., Macromol. Rapid Commun., 2011, 32: 1379

  20. [20]

      Deepa, P. and Jayakannan, M., J. Polym. Sci., Part A: Polym. Chem., 2008, 46: 2445

  21. [21]

      Deepa, P. and Jayakannan, M., J. Polym. Sci., Part A: Polym. Chem., 2007, 45: 2351

  22. [22]

      Rokicki, G. and Piotrowska, A., Polymer, 2002, 43: 2927

  23. [23]

      Ochiai, B. and Utsuno, T., J. Polym. Sci., Part A: Polym. Chem., 2013, 51: 525

  24. [24]

      Sharma, B., Ubaghs, L., Keul, H., Hcker, H., Loontjens, T. and van Benthem, R., Polymer, 2004, 45: 5427

  25. [25]

      Sharma, B., Ubaghs, L., Keul, H., Hcker, H., Loontjens, T. and van Benthem, R., Macromol. Chem. Phys.,2004, 205: 1536

  26. [26]

      Sharma, B., Ubaghs, L., Keul, H., Hcker, H., Loontjens, T. and van Benthem, R., Polymer, 2005, 46: 1775

  27. [27]

      Li, C.G., Li, S.Q., Zhao, J.B., Zhang, Z.Y., Zhang, J.Y. and Yang, W.T., Acta Polymerica Sinica (in Chinese),2014, (11): 1486

  28. [28]

      Li, S.Q., Zhao, J.B., Zhang, Z.Y., Zhang, J.Y. and Yang, W.T., RSC Adv., 2014, 4: 23720

  29. [29]

      Deng, Y., Li, S.Q., Zhao, J.B., Zhang, Z.Y., Zhang, J.Y. and Yang, W.T., RSC Adv., 2014, 4: 43406

  30. [30]

      Shi, Q.S. and Liu, T.Q., Adv. Mater. Res., 2011, 284~286: 1983

•