English

• 
  
• 1. [1]

     [1] Gazotti Jr, W.A., Casalbore-Miceli, G., Mitzakoff, S., Geri, A., Gallazzi, M.C. and de Paoli, M.A., Electrochim. Acta., 1999, 44: 1965 [2] Laakso, J., Osterholm, J.E., Nyholm, P., Stubb, H. and Punnka, E., Synthetic Met., 1990, 37: 145 [3] Goncalves, D., Waddon, A., Karasz, F.E. and Akcerlud, L., Synthetic Met., 1995, 74: 197 [4] Kucukyavuz, S., Sankir, M[J].and Kucukyavuz, Z., Synthetic Met.2002, 128:247- [5] Shen, Z., Xue, H[J].and Li, Y., Synthetic Met.2001, 124:345- [6] Faez, R., Schuster, R.H. and De Paoli, M.A., Eur. Polym. J., 2002, 38: 2459 [7] Zrinyi, M., Feher, J[J].and Filipcsei, G., Macromolecules.2000, 33:5751- [8] Puvanatvattana, T., Chotpattananont, D., Hiamtup, P., Niamlang, S., Sirivat, A. and Jamieson, A.M., React. Funct. Polym., 2006, 66: 1575 [9] Anand, J., Palaniappan, S. and Sathyanarayana, D.N., Prog. Polym. Sci., 1998, 23: 993 [10] Hao, T., Adv. Mater., 2001, 13: 1847 [11] Hao, T., Adv[J].Colloid Interfac.2002, 97:1- [12] Yamaguchi, H., Zhang, X[J].R., Niu, X.D., Smart Mater. Struct.2010, 19:105032- [13] Liu, Y.D., Fang, F.F., Choi, H.J., Mater. Lett., 2010, 64: 154 [14] Lee, Y.H., Kim, C.A., Jang, W.H., Choi, H.J. and Jhon, M.S., Polymer, 2001, 42: 8277 [15] Kumar, D. and Sharma, R[J].C., Eur. Polym. J.1998, 34:1053- [16] Eyrik, M., Yavuz, M., Unal, H.I. and Sari, B., Polym. Composite, 2009, 30: 1345 [17] Ozgun, A., Sari, B., Uygun, A., Unal, H.I. and Cakanyildirim, C., Int. J. Polym. Anal. Ch., 2009, 14: 469 [18] German, R.M., Powder metallurgy science: material powder industries separation, MPIF, Princeton, 1994, p. 28 [19] Block, H. and Kelly, J[J].P., J. Phys. D: Appl. Phys.1988, 21:1661- [20] Uemura, T., Minagawa, K., Takimoto, J. and Koyama, K., J. Chem. Soc. Faraday Trans., 1995, 91: 1051 [21] Lu, J. and Zhao, X[J]., J. Colloid Interf. Sci.2004, 273:651- [22] Kittipoomwong, D., Klingenberg, D.J., Shkel, Y.M., Morris, J.F. and Ulicny, J.C., J. Rheol., 2008, 52: 225 [23] Wu, S. and Shen, J[J]., J. Appl. Polym. Sci.1996, 60:2159- [24] Parthasaraty, M. and Klingenberg, D[J].J., Mater. Sci. Eng. R.1996, 17:57- [25] Conrad.[J].H. and Chen, Y., Progress in electrorheology, Plenum, New York.1970,:- [26] Davis, L.C., Appl. Phys. Lett., 1992, 60: 319 [27] Chotpattananont, D., Sirivat, A[J].and Jamieson, A.M., Macromol. Mater. Eng.2004, 289:434- [28] Kim, S.G., Lim J.Y., Sung J.H., Choi, H.J. and Seo, Y., Polymer, 2007, 48: 6622 [29] Sung, J.H., Hong, C.H., Park, B.J., Choi, H.J. and Jhon, M.S., Scripta Mater., 2005, 53: 1101 [30] Belza, T., Pavlinek, V., Saha, P. and Quadrat, O., Colloid. Surface. A, 2008, 316: 89 [31] Ramos-Tejada, M.M., Espin, M.J., Perea, R. and Delgado, A.V., J. Non-Newton. Fluid, 2009, 159: 34 [32] Munstedt, H., Koppl, T. and Triebel, C., Polymer, 2010, 51: 185 [33] Wolff, F., Resch, J.A., Kaschta, J. and Munstedt, H., Rheol. Acta, 2010, 49: 95 [34] Cho, M.S., Lee J.H., Choi, H.J., Ahn, K.H., Lee, S.J. and Jeon, D., J. Mater. Sci., 2004, 39: 1377 [35] Genovese, A. and Shanks, R[J].A., Macromol. Mater. Eng.2007, 292:184-

•