Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

Citation: Li-feng Fang, Na-chuan Wang, Ming-yong Zhou, Bao-ku Zhu, Li-ping Zhu, Angelin Ebanezar John. Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation[J]. Chinese Journal of Polymer Science, 2015, 33(11): 1491-1502. doi: 10.1007/s10118-015-1701-4 shu

Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

1.
Key Laboratory of Macromolecular Synthesis and Functionalization (Ministry of Education), Engineering Research Center of Membrane and Water Treatment (Ministry of Education), Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China

通讯作者: Bao-ku Zhu, ms630@zju.edu.cn

基金项目:
This work was financially supported by the National 863 Program (No. 2012AA03A602), National 973 Program (No. 2009CB623402) and the National Natural Science Foundation of China (No. U1134002).

摘要: To functionalize poly(vinyl chloride) (PVC) for various applications, monomers containing tertiary amine group are incorporated into PVC via atom transfer radical polymerization (ATRP) initiated by the labile chlorines in their backbones. The kinetics of synthesis was carefully investigated, and it is proven that the grafting polymerization process can be effectively controlled by regulating the reaction time. The membranes are fabricated using PVC and copolymers by non-solvent induced phase separation (NIPS) process. The hydrophilicity and pore structure of copolymer membranes were enhanced as well, these membranes are endowed with positive charge. When PDMA% (i.e., the PDMA weight percentage in copolymer) is 31.1%, the flux and Victoria blue B rejection are 26.0 Lm-2h-1 (0.5 MPa) and 91.2%, respectively. Thus, the newly synthesized polymer is proven to be a promising material for dye separation with positive charges.

关键词:

Poly(vinyl chloride)
/ Poly(N,N-dimethylaminoethyl methacrylate)
/ Non-solvent induced phase separation
/ Dye separatio

English

Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

1.
Key Laboratory of Macromolecular Synthesis and Functionalization (Ministry of Education), Engineering Research Center of Membrane and Water Treatment (Ministry of Education), Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China

Corresponding author: Bao-ku Zhu, ms630@zju.edu.cn

Received Date: 24 March 2015
Revised Date: 17 April 2015
Available Online: 05 November 2015
Fund Project:
This work was financially supported by the National 863 Program (No. 2012AA03A602), National 973 Program (No. 2009CB623402) and the National Natural Science Foundation of China (No. U1134002).

Abstract: To functionalize poly(vinyl chloride) (PVC) for various applications, monomers containing tertiary amine group are incorporated into PVC via atom transfer radical polymerization (ATRP) initiated by the labile chlorines in their backbones. The kinetics of synthesis was carefully investigated, and it is proven that the grafting polymerization process can be effectively controlled by regulating the reaction time. The membranes are fabricated using PVC and copolymers by non-solvent induced phase separation (NIPS) process. The hydrophilicity and pore structure of copolymer membranes were enhanced as well, these membranes are endowed with positive charge. When PDMA% (i.e., the PDMA weight percentage in copolymer) is 31.1%, the flux and Victoria blue B rejection are 26.0 Lm-2h-1 (0.5 MPa) and 91.2%, respectively. Thus, the newly synthesized polymer is proven to be a promising material for dye separation with positive charges.

Key words:

Poly(vinyl chloride)
/ Poly(N,N-dimethylaminoethyl methacrylate)
/ Non-solvent induced phase separation
/ Dye separatio

1. [1]
  Focke, W.W., Muiambo, H., Mhike, W., Kruger, H.J. and Ofosu, O., Polym. Degrad. Stab., 2014, 100: 63
2. [2]
  Xu, J.A. and Xu, Z.L., J. Membr. Sci., 2002, 208: 203
3. [3]
  Ravey, M., Waterman, J., Shorr, L. and Kramer, M., J. Polym. Sci. Polym. Chem. Ed., 1976, 14: 1609
4. [4]
  Schaefer, J., J. Phys. Chem., 1966, 70: 1975
5. [5]
  Du, M., Weng, Z.X., Shan, G.R., Huang, Z.M. and Pan, Z.R., J. Appl .Polym. Sci., 1999, 73: 2649
6. [6]
  Moulay, S., Prog. Polym. Sci., 2010, 35: 303
7. [7]
  Wang, J.S. and Matyjaszewski, K., J. Am. Chem. Soc., 1995, 117: 5614
8. [8]
  Percec, V. and Asgarzadeh, F., J. Polym. Sci., Part A: Polym. Chem., 2001, 39: 1120
9. [9]
  Chen, G., Zhu, X., Cheng, Z. and Lu, J., J. Appl. Polym. Sci., 2005, 96: 183
10. [10]
  Oh, J.H., Chi, W.S., Lee, J.H., Kim, J.H. and Kang, S.W., Ind. Eng. Chem. Res., 2013, 52: 9607
11. [11]
  Ahn, S.H., Seo, J.A., Kim, J.H., Ko, Y. and Hong, S.U., J. Membr. Sci., 2009, 345: 128
12. [12]
  Koros, W., Ma, Y. and Shimidzu, T., J. Membr. Sci, 1996, 120: 149
13. [13]
  Yoon, K., Hsiao, B.S. and Chu, B., J. Membr. Sci., 2009, 326: 484
14. [14]
  Du, R.H. and Zhao, J.S., J. Membr. Sci., 2004, 239: 183
15. [15]
  Qiu, C.Q., Xu, F., Nguyen, Q.T. and Ping, Z.H., J. Membr. Sci., 2005, 255: 107
16. [16]
  Zhao, Z.P., Li, J.D., Zhang, D.X. and Chen, C.X., J. Membr. Sci., 2004, 232: 1
17. [17]
  Yoon, K., Kim, K., Wang, X.F., Fang, D.F., Hsiao, B.S. and Chu, B., Polymer, 2006, 47: 2434
18. [18]
  Malaisamy, R. and Bruening, M.L., Langmuir, 2005, 21: 10587
19. [19]
  Asatekin, A., Olivetti, E.A. and Mayes, A.M., J. Membr. Sci., 2009, 332: 6
20. [20]
  Yu, S., Liu, M., Ma, M., Qi, M., L, Z. and Gao, C., J. Membr. Sci., 2010, 350: 83
21. [21]
  Ran, J., Wu, L., Zhang, Z. and Xu, T., Prog. Polym. Sci., 2014, 39: 124
22. [22]
  Rana, D. and Matsuura, T., Chem. Rev., 2010, 110: 2448
23. [23]
  Pan, K., Ren, R., Li, H. and Cao, B., Polym. Adv. Technol., 2013, 24: 22
24. [24]
  Pan, K., Zhang, X., Zhu, J. and Cao, B., Polym. Adv. Technol., 2011, 22: 1948
25. [25]
  Pan, K., Zhang, X., Ren, R. and Cao, B., J. Membr. Sci., 2010, 356: 133
26. [26]
  Pan, K., Zhang, X. and Cao, B., Polym. Int., 2010, 59: 733
27. [27]
  Yi, Z., Zhu, L.P., Zhao, Y.F., Wang, Z.B., Zhu, B.K. and Xu, Y.Y., J. Membr. Sci., 2014, 463: 49
28. [28]
  Mckel, D., Staude, E., Dal-Cin, M., Darcovich, K. and Guiver, M., J. Membr. Sci., 1998, 145: 211
29. [29]
  Xie, H., Saito, T. and Hickner, M.A., Langmuir, 2011, 27: 4721
30. [30]
  Endo, K., Prog. Polym. Sci., 2002, 27: 2021
31. [31]
  Bicak, N. and Ozlem, M., J. Polym. Sci., Part A: Polym. Chem., 2003, 41: 3457
32. [32]
  Kim, D.J., Lee, K.B., Chi, Y.S., Kim, W.J., Paik, H.J. and Choi, I.S., Langmuir, 2004, 20: 7904
33. [33]
  Jiang, M., Wang, J., Li, L., Pan, K. and Cao, B., RSC Advances, 2013, 3: 20625
34. [34]
  Pan, K., Li, H., Liang, B., Qi, G. and Cao, B., Polym. Int., 2015, 64: 138
35. [35]
  Mijangos, C. and Lopez, D., Macromolecules, 1995, 28: 1364
36. [36]
  Samanta, S., Chatterjee, D.P., Manna, S., Mandal, A., Garai, A. and Nandi, A.K., Macromolecules, 2009, 42: 3112
37. [37]
  Zhu, L.P., Dong, H.B., Wei, X.Z., Yi, Z., Zhu, B.K. and Xu, Y.Y., J. Membr. Sci., 2008, 320: 407
38. [38]
  Zhao, Y.H., Qian, Y.L., Pang, D.X., Zhu, B.K. and Xu, Y.Y., J. Membr. Sci., 2007, 304: 138
39. [39]
  Thijs, H.M., Becer, C.R., Guerrero-Sanchez, C., Fournier, D., Hoogenboom, R. and Schubert, U.S., J. Mater. Chem., 2007, 17: 4864
40. [40]
  Schaep, J. and Vandecasteele, C., J. Membr. Sci., 2001, 188: 129
41. [41]
  Yi, Z., Zhu, L.P., Xu, Y.Y., Gong, X.N. and Zhu, B.K., J. Membr. Sci., 2011, 385: 57
42. [42]
  Yang, Y., Wang, J., Zhang, J., Liu, J., Yang, X. and Zhao, H., Langmuir, 2009, 25: 11808
43. [43]
  Zhu, L.P., Xu, L., Zhu, B.K., Feng, Y.X. and Xu, Y.Y., J. Membr. Sci., 2007, 294: 196
44. [44]
  Fan, X., Su, Y., Zhao, X., Li, Y., Zhang, R., Zhao, J., Jiang, Z., Zhu, J., Ma, Y. and Liu, Y., J. Membr. Sci., 2014, 464: 100
45. [45]
  Ferjani, E., Ellouze, E. and Ben Amar, R., Desalination, 2005, 177: 43
46. [46]
  Haddada, R., Ferjani, E., Roudesli, M.S. and Deratani, A., Desalination, 2004, 167: 403

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 1348
HTML全文浏览量: 8

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

通讯作者: Bao-ku Zhu, ms630@zju.edu.cn

English

Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

Corresponding author: Bao-ku Zhu, ms630@zju.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

通讯作者: Bao-ku Zhu, ms630@zju.edu.cn

English

Poly(N,N-dimethylaminoethyl methacrylate) Grafted Poly(vinyl chloride)s Synthesized via ATRP Process and Their Membranes for Dye Separation

Corresponding author: Bao-ku Zhu, ms630@zju.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs