Effect of Fumed SiO2 on Pore Formation Mechanism and Various Performances of β-iPP Microporous Membrane Used for Lithium-ion Battery Separator

Ding Lei ,  Guan Xu ,  Qian Ge ,  Tong Wu ,  Feng Yang ,  Xiang Ming

Citation:  Ding Lei, Guan Xu, Qian Ge, Tong Wu, Feng Yang, Xiang Ming. Effect of Fumed SiO2 on Pore Formation Mechanism and Various Performances of β-iPP Microporous Membrane Used for Lithium-ion Battery Separator[J]. Chinese Journal of Polymer Science, 2018, 36(4): 536-545. doi: 10.1007/s10118-018-2029-7 shu

Effect of Fumed SiO2 on Pore Formation Mechanism and Various Performances of β-iPP Microporous Membrane Used for Lithium-ion Battery Separator

English


    1. [1]

      Arora P., Zhang Z. J.. Battery separators[J]. Chem. Rev., 2004, 104(10):  4419-4462. doi: 10.1021/cr020738u

    2. [2]

      Huang X.. A lithium-ion battery separator prepared using a phase inversion process[J]. J. Power Sources, 2012, 216:  216-221. doi: 10.1016/j.jpowsour.2012.05.019

    3. [3]

      Jeong H., Hong S. C., Lee S.. Effect of microporous structure on thermal shrinkage and electrochemical performance of Al2O3/poly(vinylidene fluoride-hexafluoropropylene) composite separators for lithium-ion batteries[J]. J. Membr. Sci., 2010, 364(1-2):  177-182. doi: 10.1016/j.memsci.2010.08.012

    4. [4]

      Jeong H., Kim D., Jeong Y. U., Lee S.. Effect of phase inversion on microporous structure development of Al2O3/poly(vinylidene fluoride-hexafluoropropylene)-based ceramic composite separators for lithium-ion batteries[J]. J. Power Sources, 2010, 195(18):  6116-6121. doi: 10.1016/j.jpowsour.2009.10.085

    5. [5]

      Lalia B. S., Kochkodan V., Hashaikeh R., Hilal N.. A review on membrane fabrication:structure, properties and performance relationship[J]. Desalination, 2013, 326:  77-95. doi: 10.1016/j.desal.2013.06.016

    6. [6]

      Sohn J., Im J., Shin J., Nho Y. C.. PVDF-HFP/PMMA-coated PE separator for lithium ion battery[J]. J. Solid State Electr., 2012, 16(2):  551-556. doi: 10.1007/s10008-011-1379-7

    7. [7]

      Song K. W., Kim C. K.. Coating with macroporous polyarylate via a nonsolvent induced phase separation process for enhancement of polyethylene separator thermal stability[J]. J. Membr. Sci., 2010, 352(1-2):  239-246. doi: 10.1016/j.memsci.2010.02.020

    8. [8]

      Zhang S. S.. A review on the separators of liquid electrolyte Li-ion batteries[J]. J. Power Sources, 2007, 164(1):  351-364. doi: 10.1016/j.jpowsour.2006.10.065

    9. [9]

      Li J. X., Cheung W. L.. On the deformation mechanisms of β-polypropylene:1[J]. Effect of necking on β-phase PP crystals. Polymer, 1998, 39(26):  6935-6940.

    10. [10]

      Li J. X., Cheung W. L., Chan C. M.. On deformation mechanisms of β-polypropylene 2[J]. Changes of lamellar structure caused by tensile load. Polymer, 1999, 40(8):  2089-2102.

    11. [11]

      Li J. X., Cheung W. L., Chan C. M.. On deformation mechanisms of β-polypropylene 3[J]. Lamella structures after necking and cold drawing. Polymer, 1999, 40(13):  3641-3656.

    12. [12]

      Sadeghi F., Ajji A., Carreau P.. Analysis of microporous membranes obtained from polypropylene films by stretching[J]. J. Membr. Sci., 2007, 292(1-2):  62-71. doi: 10.1016/j.memsci.2007.01.023

    13. [13]

      Tabatabaei S., Carreau P., Ajji A.. Microporous membranes obtained from polypropylene blend films by stretching[J]. J. Membr. Sci., 2008, 325(2):  772-782. doi: 10.1016/j.memsci.2008.09.001

    14. [14]

      Ihm D., Noh J., Kim J.. Effect of polymer blending and drawing conditions on properties of polyethylene separator prepared for Li-ion secondary battery[J]. J. Power Sources, 2002, 109(2):  388-393. doi: 10.1016/S0378-7753(02)00097-6

    15. [15]

      Kim S. S., Lloyd D. R.. Microporous membrane formation via thermally-induced phase separation.Ⅲ. Effect of thermodynamic interactions on the structure of isotactic polypropylene membranes[J]. J. Membr. Sci., 1991, 64(1-2):  13-29.

    16. [16]

      Wu T., Xiang M., Cao Y., Kang J., Yang F.. Pore formation mechanism of β nucleated polypropylene stretched membranes[J]. RSC Adv., 2014, 4(69):  36689-36701. doi: 10.1039/C4RA03589E

    17. [17]

      Wu T., Xiang M., Cao Y., Kang J., Yang F.. Influence of lamellar structure on double yield behavior and pore size distribution in β nucleated polypropylene stretched membranes[J]. RSC Adv., 2014, 4(81):  43012-43023. doi: 10.1039/C4RA06310D

    18. [18]

      Wu T., Xiang M., Cao Y., Kang J., Yang F.. Influence of lamellar structure on the stress-strain behavior of β nucleated polypropylene under tensile loading at elevated temperatures[J]. RSC Adv., 2015, 5(54):  43496-43507. doi: 10.1039/C5RA05844A

    19. [19]

      Yang F., Wu T., Xiang M., Cao Y.. Deformation and pore formation mechanism of β nucleated polypropylene with different supermolecular structures[J]. Eur. Polym. J., 2017, :  . doi: 10.1016/j.eurpolymj.2017.03.059

    20. [20]

      Huang X., Hitt J.. Lithium ion battery separators:development and performance characterization of a composite membrane[J]. J. Membr. Sci., 2013, 425:  163-168.

    21. [21]

      Jeong H., Kim J. H., Lee S.. A novel poly(vinylidene fluoride-hexafluoropropylene)/poly(ethylene terephthalate) composite nonwoven separator with phase inversion-controlled microporous structure for a lithium-ion battery[J]. J. Mater. Chem., 2010, 20(41):  9180-9186. doi: 10.1039/c0jm01086c

    22. [22]

      Jeong H., Lee S.. Closely packed SiO2 nanoparticles/poly(vinylidene fluoride-hexafluoropropylene) layers-coated polyethylene separators for lithium-ion batteries[J]. J. Power Sources, 2011, 196(16):  6716-6722. doi: 10.1016/j.jpowsour.2010.11.037

    23. [23]

      Park J., Cho J., Park W., Ryoo D., Yoon S., Kim J., Jeong Y., Lee S.. Close-packed SiO2/poly(methyl methacrylate) binary nanoparticles-coated polyethylene separators for lithium-ion batteries[J]. J. Power Sources, 2010, 195(24):  8306-8310. doi: 10.1016/j.jpowsour.2010.06.112

    24. [24]

      Liu F., Xiao Q., Wu H. B.. Regenerative polysulfide-scavenging layers enabling lithium-sulfur batteries with high energy density and prolonged cycling life[J]. ACS Nano, 2017, 11(3):  2697-2705. doi: 10.1021/acsnano.6b07603

    25. [25]

      Choi J., Kim S. H., Kim D.. Enhancement of thermal stability and cycling performance in lithium-ion cells through the use of ceramic-coated separators[J]. J. Power Sources, 2010, 195(18):  6192-6196. doi: 10.1016/j.jpowsour.2009.11.020

    26. [26]

      Kim K. J., Kim J., Park M., Kwon H. K., Kim H., Kim Y. J.. Enhancement of electrochemical and thermal properties of polyethylene separators coated with polyvinylidene fluoride-hexafluoropropylene co-polymer for Li-ion batteries[J]. J. Power Sources, 2012, 198:  298-302. doi: 10.1016/j.jpowsour.2011.09.086

    27. [27]

      Kim K. M., Kim J., Ryu K. S.. Characteristics of PVDF-HFP/TiO2 composite electrolytes prepared by a phase inversion technique using dimethyl acetamide solvent and water non-solvent[J]. Macromol. Mater. Eng., 2006, 291(12):  1495-1502. doi: 10.1002/(ISSN)1439-2054

    28. [28]

      Li Z., Su G., Gao D., Wang X., Li X.. Effect of Al2O3 nanoparticles on the electrochemical characteristics of P(VDF-HFP)-based polymer electrolyte[J]. Electrochim Acta, 2004, 49(26):  4633-4639. doi: 10.1016/j.electacta.2004.05.018

    29. [29]

      Wachtler M., Ostrovskii D., Jacobsson P., Scrosati B.. A study on PVDF-based SiO2-containing composite gel-type polymer electrolytes for lithium batteries[J]. Electrochim. Acta, 2004, 50(2-3):  357-361. doi: 10.1016/j.electacta.2004.01.103

    30. [30]

      Shi C., Dai J., Shen X.. A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al2O3 particles for lithium-ion batteries[J]. J. Membr. Sci., 2016, 517:  91-99. doi: 10.1016/j.memsci.2016.06.035

    31. [31]

      Yu L., Miao J., Jin Y., Lin J.. A comparative study on polypropylene separators coated with different inorganic materials for lithium-ion batteries[J]. Front. Chem. Sci. Eng., 2017, :  . doi: 10.1007/s11705-017-1648-9

    32. [32]

      Takemura D., Aihara S., Hamano K.. A powder particle size effect on ceramic powder based separator for lithium rechargeable battery[J]. J. Power Sources, 2005, 146(1-2):  779-783. doi: 10.1016/j.jpowsour.2005.03.159

    33. [33]

      Zhang S., Xu K., Jow T.. An inorganic composite membrane as the separator of Li-ion batteries[J]. J. Power Sources, 2005, 140(2):  361-364. doi: 10.1016/j.jpowsour.2004.07.034

    34. [34]

      Huang X.. Separator technologies for lithium-ion batteries[J]. J. Solid State Electrochem., 2011, 15(4):  649-662. doi: 10.1007/s10008-010-1264-9

    35. [35]

      Varga J.. β-Modification of isotactic polypropylene:preparation, structure, processing, properties and application[J]. J. Macromol. Sci. B, 2002, 41(4):  1121-1171. doi: 10.1081/MB-120013089

    36. [36]

      Huo H., Jiang S., An L., Feng J.. Influence of shear on crystallization behavior of the β phase in isotactic polypropylene with β-nucleating agent[J]. Macromolecules, 2004, 37(7):  2478-2483. doi: 10.1021/ma0358531

    37. [37]

      Luo F., Geng C., Wang K., Deng H., Chen F., Fu Q., Na B.. New understanding in tuning toughness of β-polypropylene:the role of β-nucleated crystalline morphology[J]. Macromolecules, 2009, 42(23):  9325-9331. doi: 10.1021/ma901651f

    38. [38]

      Wu T., Cao Y., Yang F., Xiang M.. Investigation on double yielding behavior under tensile loading in isotactic polypropylene[J]. Mater. Design, 2014, :  . doi: 10.1016/j.matdes.2014.03.044

    39. [39]

      Lin Y., Meng L., Wu L.. A semi-quantitative deformation model for pore formation in isotactic polypropylene microporous membrane[J]. Polymer., 2015, :  . doi: 10.1016/j.polymer.2015.10.067

    40. [40]

      Aboulfaraj M., G'Sell C., Ulrich B., Dahoun A.. In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope[J]. Polymer, 1995, 36(4):  731-742. doi: 10.1016/0032-3861(95)93102-R

    41. [41]

      Bassett D. C., Olley R. H.. On the lamellar morphology of isotactic polypropylene spherulites[J]. Polymer, 1984, 25(7):  935-943. doi: 10.1016/0032-3861(84)90076-4

    42. [42]

      Olley R. H., Bassett D. C.. On the development of polypropylene spherulites[J]. Polymer, 1989, 30(3):  399-409. doi: 10.1016/0032-3861(89)90004-9

    43. [43]

      Olley R. H., Hodge A. M., Bassett D. C.. A permanganic etchant for polyolefines[J]. J. Polym. Sci:Polym. Phys. Ed., 1979, 17(4):  627-643. doi: 10.1002/pol.1979.180170406

    44. [44]

      Ran S., Xu M.. Studies on the pore formation mechanism of β-crystalline polypropylene under stretching[J]. Chinese J. Polym. Sci., 2004, 22(2):  123-130.

    45. [45]

      Zhu W., Zhang X., Zhao C., Wu W., Hou J., Xu M.. A Novel polypropylene microporous film[J]. Polym. Adv. Technol., 1996, 7(9):  743-748. doi: 10.1002/(ISSN)1099-1581

    46. [46]

      Liu S., Zhou C., Yu W.. Phase separation and structure control in ultra-high molecular weight polyethylene microporous membrane[J]. J. Membr. Sci., 2011, 379(1-2):  268-278. doi: 10.1016/j.memsci.2011.05.073

    47. [47]

      Fu D., Luan B., Argue S., Bureau M., Davidson I.. Nano SiO2 particle formation and deposition on polypropylene separators for lithium-ion batteries[J]. J. Power Sources, 2012, :  . doi: 10.1016/j.jpowsour.2011.10.130

    48. [48]

      Osińska M., Walkowiak M., Zalewska A., Jesionowski T.. Study of the role of ceramic filler in composite gel electrolytes based on microporous polymer membranes[J]. J. Membr. Sci., 2009, 326(2):  582-588. doi: 10.1016/j.memsci.2008.10.036

    49. [49]

      Bai H., Luo F., Zhou T., Deng H., Wang K., Fu Q.. New insight on the annealing induced microstructural changes and their roles in the toughening of β-form polypropylene[J]. Polymer, 2011, 52(10):  2351-2360. doi: 10.1016/j.polymer.2011.03.017

    50. [50]

      Bai H., Wang Y., Zhang Z., Han L., Li Y., Liu L., Zhou Z., Men Y.. Influence of annealing on microstructure and mechanical properties of isotactic polypropylene with β-phase nucleating agent[J]. Macromolecules, 2009, 42(17):  6647-6655. doi: 10.1021/ma9001269

    51. [51]

      Ding L., Wu T., Yang F., Xiang M.. Deformation and pore formation mechanism under tensile loading in isotactic polypropylene[J]. Polym. Int., 2017, 66(8):  1129-1140. doi: 10.1002/pi.2017.66.issue-8

    52. [52]

      Lin K. Y., Xanthos M., Sirkar K. K.. Novel polypropylene microporous membranes via spherulitic deformation-processing perspectives[J]. Polymer, 2009, 50(19):  4671-4682. doi: 10.1016/j.polymer.2009.07.014

    53. [53]

      Lin K. Y., Xanthos M., Sirkar K. K.. Novel polypropylene-based microporous membranes via spherulitic deformation[J]. J. Membr. Sci., 2009, 330(1-2):  267-278. doi: 10.1016/j.memsci.2008.12.060

    54. [54]

      Wu C., Zhang M., Rong M., Friedrich K.. Tensile performance improvement of low nanoparticles filled-polypropylene composites[J]. Compos. Sci. Technol., 2002, 62(10-11):  1327-1340. doi: 10.1016/S0266-3538(02)00079-9

    55. [55]

      Hwang S., Hsu P. P.. Effects of silica particle size on the structure and properties of polypropylene/silica composites foams[J]. J. Ind. Eng. Chem., 2013, 19(4):  1377-1383. doi: 10.1016/j.jiec.2012.12.043

    56. [56]

      Zhou T., Ruan W., Mai Y., Rong M., Zhang M.. Performance improvement of nano-silica/polypropylene composites through in-situ cross-linking approach[J]. Compos. Sci. Technol., 2008, 68(14):  2858-2863. doi: 10.1016/j.compscitech.2007.10.002

    57. [57]

      Dougnac V. N., Alamillo R., Peoples B. C., Quijada R.. Effect of particle diameter on the permeability of polypropylene/SiO2 nanocomposites[J]. Polymer, 2010, 51(13):  2918-2926. doi: 10.1016/j.polymer.2010.02.014

    58. [58]

      Chen J., Rong M., Ruan W., Zhang M.. Interfacial enhancement of nano-SiO2/polypropylene composites[J]. Compos. Sci. Technol., 2009, 69(2):  252-259. doi: 10.1016/j.compscitech.2008.10.013

    59. [59]

      Hsu C., Chien L., Kuo P.. High thermal and electrochemical stability of a SiO2 nanoparticle hybird-polyether cross-linked membrane for safety reinforced lithium-ion batteries[J]. RSC Adv., 2016, 6(22):  18089-18095. doi: 10.1039/C5RA26694G

    60. [60]

      Liu H., Xu J., Guo B., He X.. Preparation and performance of silica/polypropylene composite separator for lithium-ion batteries[J]. J. Mater. Sci., 2014, 49(20):  6961-6966. doi: 10.1007/s10853-014-8401-2

    61. [61]

      Jia D., Wang L.. Decoration of silica nanoparticles on polypropylene separator for lithium-sulfur batteries[J]. ACS Appl. Mater. Interfaces, 2017, 9(8):  7499-7504. doi: 10.1021/acsami.7b00065

    62. [62]

      Wang Y., Wang S., Fang J., Ding L., Wang H.. A nano-silica modified polyimide nanofiber separator with enhanced thermal and wetting properties for high safety lithium-ion batteries[J]. J. Membr. Sci., 2017, 537:  248-254. doi: 10.1016/j.memsci.2017.05.023

  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  2422
  • HTML全文浏览量:  103
文章相关
  • 发布日期:  2018-04-05
  • 收稿日期:  2017-06-17
  • 接受日期:  2017-08-30
  • 网络出版日期:  2017-11-07
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章