SBA-15表面改性及其对介孔La0.8Sr0.2CoO3钙钛矿型催化剂结构和性能的影响

引用本文: 黄学辉, 商晓辉, 牛鹏举. SBA-15表面改性及其对介孔La_0.8Sr_0.2CoO₃钙钛矿型催化剂结构和性能的影响[J]. 物理化学学报, 2017, 33(7): 1462-1473. doi: 10.3866/PKU.WHXB201704103 shu

Citation: HUANG Xue-Hui, SHANG Xiao-Hui, NIU Peng-Ju. Surface Modification of SBA-15 and Its Effect on the Structure and Properties of Mesoporous La_0.8Sr_0.2CoO₃[J]. Acta Physico-Chimica Sinica, 2017, 33(7): 1462-1473. doi: 10.3866/PKU.WHXB201704103 shu

SBA-15表面改性及其对介孔La_0.8Sr_0.2CoO₃钙钛矿型催化剂结构和性能的影响

武汉理工大学材料科学与工程学院, 武汉 430070

摘要: 本文通过改进的水热法制备了孔径较大的有序介孔SBA-15，其孔径（D_p）为10.1 nm，并采用浓盐酸、三甲基氯硅烷（TMCS）和3-氨丙基三乙氧基硅烷（APTES）对SBA-15表面进行了羟基、甲基和氨基改性处理。以嫁接不同表面官能团的SBA-15为模板，合成了一系列菱方晶系钙钛矿型介孔La_0.8Sr_0.2CoO₃氧化物，系统地研究了模板SBA-15的表面性能对La_0.8Sr_0.2CoO₃氧化物结构和性能的影响。X射线衍射（XRD）图谱表明，外表面引入-CH₃，内表面羟基化和引入-NH₂的模板有利于合成结晶度较高的、物相单一的钙钛矿结构氧化物。小角XRD图谱、高分辨率透射电子显微镜（HRTEM）图像以及N₂吸附测试结果表明，所制备的催化剂为介孔结构。CO氧化的催化活性测试表明，采用表面改性的模板合成的La_0.8Sr_0.2CoO₃氧化物表现出较高的催化活性和稳定性，在140℃时可以实现CO的完全转化，连续使用100 h后催化剂的催化活性几乎没有下降。X射线光电子能谱（XPS）、H₂程序升温还原（H₂-TPR）和O₂程序升温脱附（O₂-TPD）测试结果表明，催化剂表面丰富的吸附氧物种，高价态的Co离子，钙钛矿结构中Sr在表面富集，及优良的低温氧化还原性是催化活性提高的主要原因。

关键词:

English

Surface Modification of SBA-15 and Its Effect on the Structure and Properties of Mesoporous La_0.8Sr_0.2CoO₃

School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, P. R. China
Received Date: 22 December 2016
Revised Date: 21 March 2017
Available Online: 10 April 2017

Abstract: Mesoporous SBA-15 with mesopore diameter up to 10.1 nm was prepared by a hydrothermal method, and was further functionalized to obtain different surface properties. Thus-prepared SBA-15 was employed as a template to synthesize rhombohedrally crystallized mesoporous La_0.8Sr_0.2CoO₃ perovskite via a nanocasting method. The surface properties of the SBA-15 were adjusted by treatment with concentrated hydrochloric acid, trimethylchlorosilane (TMCS), and 3-aminopropyltriethoxysilane (APTES). A series of characterization techniques verified that all the synthesized templates possessed ordered two-dimensional hexagonal mesoporous structure, and the surface was successfully modified with methyl and amino groups. The mesoporous perovskite structure was formed in the samples and the surface properties of SBA-15 significantly influenced the structure and properties of La_0.8Sr_0.2CoO₃ perovskite oxides. Wide-angle X-ray diffraction patterns suggested that the modified silica templates were conducive to the formation of pure perovskite frameworks with good crystallinity. The catalysts also possessed mesoporous structure, as confirmed by small-angle XRD patterns, high-resolution transmission electron microscopy images, and nitrogen adsorption analysis. Moreover, the La_0.8Sr_0.2CoO₃ materials synthesized using surface-functionalized templates exhibited relatively higher catalytic activity and stability in CO oxidation. Complete CO conversion could be achieved at 140℃ using the thus-prepared La_0.8Sr_0.2CoO₃ materials, and no significant loss in catalytic activity was observed after 100 h of on-stream reaction experiments. X-ray photoelectron spectroscopy, H₂ temperature-programmed reduction, and O₂ temperature-programmed desorption experiments revealed that the existence of Co⁴⁺, Sr enrichment in the perovskite structure, and high content of adsorbed oxygen species play a critical role in the enhanced catalytic activity of the catalysts. We also proposed the possible reasons for the effect of surface properties of the silica templates on the structure and properties of the La_0.8Sr_0.2CoO₃ nanomaterials.

Key words:

1. [1]
  (1) Qi, J.; Chen, J.; Li, G. D.; Li, S. X.; Gao, Y.; Tang, Z. Y. EnergyEnviron. Sci. 2012, 5, 8937. doi: 10.1039/C2EE22600F
2. [2]
  (2) Li, X. Z.; Ni, C. Y.; Lu, X. W.; Zuo, S. X.; Liu, W. J.; Yao, C. Catal. Sci. Technol. 2016, 6, 545. doi: 10.1039/C5CY00909J
3. [3]
  (3) Liang, Q.; Zhao, Z.; Liu, J.; Wei, Y. C.; Jiang, G. Y.; Duan, A. J.Acta Phys. -Chim. Sin. 2014, 30, 129. [梁倩, 赵震, 刘坚, 韦岳长, 姜桂元, 段爱军. 物理化学学报, 2014, 30, 129.] doi: 10.3866/PKU.WHXB201311201.
4. [4]
  (4) Suh, M. J.; Park, Y. K.; Ihm, S. K. Catal. Today 2016, 265, 210. doi: 10.1016/j.cattod.2015.08.057
5. [5]
  (5) Li, X. W.; Dai, H. X.; Deng, J. G.; Liu, Y. X.; Zhao, Z. X.; Wang, Y.; Yang, H. G.; Au, C. T. Appl. Catal. A-Gen. 2013, 458, 11. doi: 10.1016/j.apcata.2013.03.022
6. [6]
  (6) Pena, M. A.; Fierro, J. L. G. Chem. Rev. 2001, 101, 1981. doi: 10.1021/cr980129f
7. [7]
  (7) Einaga, H.; Nasu, Y.; Oda, M.; Saito, H. Chem. Eng. J. 2016, 283, 97. doi: 10.1016/j.cej.2015.07.051
8. [8]
  (8) Seyfi, B.; Baghalha, M.; Kazemian, H. Chem. Eng. J. 2009, 148, 306. doi: 10.1016/j.cej.2008.08.041
9. [9]
  (9) Huang, X. H.; Niu, P. J.; Shang, X. H. Chin. J. Catal. 2016, 37, 1431. doi: 10.1016/S1872-2067(16)62502-0.
10. [10]
  (10) Ding, Q.; Xian, H.; Tan, Y. S.; Tsubaki, N.; Li, X. G. Catal. Sci. Technol. 2013, 3, 1493. doi: 10.1039/C3CY00105A
11. [11]
  (11) Wang, N.; Yu, X. P.; Wang, Y.; Chu, W.; Liu, M. Catal. Today 2013, 212, 98. doi: 10.1016/j.cattod.2012.07.022
12. [12]
  (12) Alifanti, M.; Florea, M.; Pârvulescu, V. I. Appl. Catal. B-Environ. 2007, 70, 400. doi: 10.1016/j.apcatb.2005.10.037
13. [13]
  (13) Kustov, A. L.; Tkachenko, O. P.; Kustov, L. M.; Romanovsky, B. V.Environ. Int. 2011, 37, 1053. doi: 10.1016/j.envint.2011.05.002
14. [14]
  (14) Tian, B. B.; Liu, X. Y.; Yang, H. F.; Xie, S. H.; Yu, C. Z.; Tu, B.; Zhao, D. Y. Adv. Mater. 2003, 15, 1370. doi: 10.1002/adma.200305211
15. [15]
  (15)Arandiyan, H.; Dai, H. X.; Deng, J. G.; Liu, Y. X.; Bai, B.Y.; Wang, Y.; Li, X. W.; Xie, S. H.; Li, J. H. J. Catal. 2013, 307, 327. doi: 10.1016/j.jcat.2013.07.013
16. [16]
  (16) Nair, M. M.; Kleitz, F.; Kaliaguine, S. Chin. J. Catal. 2016, 37, 32. doi: 10.1016/S1872-2067(15)60909-3.
17. [17]
  (17) Wang, Y. J.; Ren, J. W.; Wang, Y. Q.; Zhang, F. Y.; Liu, X. H.; Guo, Y.; Lu, G. Z. J. Phys. Chem. C. 2008, 112, 15293. doi: 10.1021/jp8048394
18. [18]
  (18) Wang, Y. X.; Cui, X. Z.; Li, Y. S.; Shu, Z.; Chen, H. G.; Shi, J. L.Micropor. Mesopor. Mat. 2013, 176, 8. doi: 10.1016/j.micromeso.2013.03.033
19. [19]
  (19) Valdés-Solís, T.; Marbán, G.; Fuertes, A. B. Chem. Mater. 2005, 17, 1919. doi: 10.1021/cm0477321
20. [20]
  (20) Liu, A. M.; Hidajat, K.; Kawi, S.; Zhao, D.Y. Chem Commun 2000, 13, 1145. doi: 10.1039/B002661L
21. [21]
  (21) Zhu, K. K.; Yue, B.; Zhou, W. Z.; He, H. Chem. Commun. 2003, 1, 98. doi: 10.1039/B210065G
22. [22]
  (22) Yue, B.; Tang, H. L.; Kong, Z. P.; Zhu, K. K.; Dickinson, C. Chem. Phys. Lett. 2005, 407, 83. doi: 10.1016/j.cplett.2005.03.066
23. [23]
  (23) Huang, X. B.; Yang, M.; Wang, G.; Zhang, X. X.; Micropor. Mesopor. Mat. 2011, 144, 171. doi: 10.1016/j.micromeso.2011.04.012
24. [24]
  (24) Zhao, D. Y.; Feng, J. L.; Huo, Q. S.; Melosh, N.; Fredrickson, G. H.; Chmelka, B. F.; Stucky, G. D. Science 1998, 279, 548. doi: 10.1126/science.279.5350.548
25. [25]
  (25) Zhu, Y. H.; Li, H.; Zheng, Q.; Xu, J. Q.; Li, X. X. Langmuir 2012, 28, 7843. doi: 10.1021/la300560j
26. [26]
  (26) Chen, F.; Liu, S. W.; Yu, J. G. Phys. Chem. Chem. Phys. 2016, 18, 18161. doi: 10.1039/C6CP03037H
27. [27]
  (27) Nomura, A.; Jones, C. W. Ind. Eng. Chem. Res. 2015, 54, 263. doi: 10.1021/ie504165d
28. [28]
  (28) Nomura, A.; Jones, C. W. ACS. Appl. Mater. Inter. 2013, 5, 5569. doi: 10.1021/am400810s
29. [29]
  (29) Xu, J. F.; Liu, J.; Zhao, Z.; Xu, C. M.; Zheng, J. X.; Duan, A. J.; Jiang, G. Y. J. Catal. 2011, 282, 1. doi: 10.1016/j.jcat.2011.03.024
30. [30]
  (30) Glisenti, A.; Pacella, M.; Guiotto, M.; Natile, M. M.; Canu, P. Appl. Catal. B-Environ. 2016, 180, 94. doi: 10.1016/j.apcatb.2015.06.017
31. [31]
  (31) Rousseau, S.; Loridant, S.; Delichere, P.; Boreave, A.; Deloume, J. P.; Vernoux, P. Appl. Catal. B-Environ. 2009, 88, 438. doi: 10.1016/j.apcatb.2008.10.022
32. [32]
  (32) Wang, L.; Fang, S. Q.; Feng, N. J.; Wan, H.; Guan, G. F.; Chem. Eng. J. 2016, 293, 68. doi: 10.1016/j.cej.2016.02.038
33. [33]
  (33) Merino, N. A.; Barbero, B.P.; Eloy, P.; Cadus, L. E.; Appl. Surf. Sci. 2006, 253, 1489. doi: 10.1016/j.apsusc.2006.02.035
34. [34]
  (34) Ding, J. C.; Li, H. Y.; Cai, Z. X.; Wang, X. X.; Guo, X. Sensor Actuat. B-Chem. 2016, 222, 517. doi: 10.1016/j.snb.2015.08.099
35. [35]
  (35) Ding, J. J.; Zhou, Y. N.; Sun, Q.Yu, X. Q.; Yang, X. Q.; Fu, Z. W.Electrochimica Acta 2013, 87, 388. doi: 10.1016/j.electacta.2012.09.058
36. [36]
  (36) Li, X. Y.; Zhang, Z. P.; Ma, J. T.; Zhu, Z. Z.; Meng, Y. M. Acta Phys. -Chim. Sin. 1996, 12, 502. [李绪渊, 张自萍, 马建泰, 朱宗祯, 孟益民. 物理化学学报, 1996, 12, 502.] doi: 10.3866/PKU.WHXB19960605
37. [37]
  (37) Crumlin, E. J.; Mutoro, E.; Liu, Z.; Grass M. E.; Biegalski M. D.; eYueh-Lin Lee, Morgan, D.; Christen, H. M.; Bluhm, H.; YangShao-Horn. Energ. Environ. Sci. 2012, 5, 6081. doi: 10.1039/c2ee03397f
38. [38]
  (38) Jung, W. C.; Tuller, H. L.; Energ. Environ. Sci. 2012, 5, 5370. doi: 10.1039/c1ee02762j
39. [39]
  (39) Li, X. W.; Dai, H. X.; Deng, J. G.; Liu, Y. X.; Xie, S. H.; Zhao, Z. X.; Wang. Y.; Guo, G. S.; Arandiyan, H. Chem. Eng. J. 2013, 228, 965. doi: 10.1016/j.cej.2013.05.070
40. [40]
  (40) Deng, H. B.; Lin, L.; Liu, S. J. Energ. Fuel 2010, 24, 4797. doi: 10.1021/ef100768e
41. [41]
  (41) Zhang, J. Y.; Tan, D. D.; Meng, Q. J.; Weng, X. L.; Wu, Z. B. Appl. Catal. B-Environ. 2015, 172, 18. doi: 10.1016/j.apcatb.2015.02.006
42. [42]
  (42) Levasseur, B.; Kaliaguine, S. Appl. Catal. B-Environ. 2009, 88, 305. doi: 10.1016/j.apcatb.2008.11.007
43. [43]
  (43) Liao, H. Preparation, modification and performance of mesoporousperovskite-type La-Co-O. M. S. Dissertation, Wuhan University ofTechnology, Wuhan, 2015. [廖晖. 介孔La-Co-O 钙钛矿型催化剂的制备、改性及性能研究 [D]. 武汉: 武汉理工大学, 2015.]

扫一扫看文章

计量

PDF下载量: 4
文章访问数: 1051
HTML全文浏览量: 182

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

SBA-15表面改性及其对介孔La_0.8Sr_0.2CoO₃钙钛矿型催化剂结构和性能的影响

English

Surface Modification of SBA-15 and Its Effect on the Structure and Properties of Mesoporous La_0.8Sr_0.2CoO₃

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处