English

• 
  
• 1. [1]

     Castellano, M.; Conzatti, L.; Costa, G.; Falqui, L.; Turturro, A.; Valenti, B.; Negroni, F. Surface modification of silica: 1. Thermodynamic aspects and effect on elastomer reinforcement. Polymer 2005, 46(3), 695-703. doi: 10.1016/j.polymer.2004.11.010

  2. [2]

     Prasertsri, S.; Rattanasom, N. Fumed and precipitated silica reinforced natural rubber composites prepared from latex system: Mechanical and dynamic properties. Polym. Test. 2012, 31(5), 593-605. doi: 10.1016/j.polymertesting.2012.03.003

  3. [3]

     Wang, Y. X.; Ma, J. H.; Zhang, L. Q.; Wu, Y. O. Revisiting the correlations between wet skid resistance and viscoelasticity of rubber composites via comparing carbon black and silica fillers. Polym. Test. 2011, 30(5), 557-562. doi: 10.1016/j.polymertesting.2011.04.009

  4. [4]

     Ismail, H.; Suzaimah, S. Styrene butadiene rubber/epoxidized natural rubber blends: dynamic properties, curing characteristics and swelling studies. Polym. Test. 2000, 19(8), 879-888. doi: 10.1016/S0142-9418(99)00058-6

  5. [5]

     Mathew, N. M.; De, S. K. Scanning electron microscopy studies in abrasion of NR/BR blends under different test conditions. J. Mater. Sci. 1983, 18(2), 515-524. doi: 10.1007/BF00560641

  6. [6]

     Wu, W. L.; Chen, D. J. Silica-modified SBR/BR blends. J. Appl. Polym. Sci. 2015, 120(6), 3695-3700.

  7. [7]

     Wang, Y. X.; Wu, Y. P.; Li, W. J.; Zhang, L. Q. Influence of filler type on wet skid resistance of SSBR/BR composites: Effects from roughness and micro-hardness of rubber surface. Appl. Surf. Sci. 2011, 257(6), 2058-2065. doi: 10.1016/j.apsusc.2010.08.129

  8. [8]

     Rattanasom, N.; Saowapark, T.; Deeprasertkul, C. Reinforcement of natural rubber with silica/carbon black hybrid filler. Polym. Test. 2007, 26(3), 369-377. doi: 10.1016/j.polymertesting.2006.12.003

  9. [9]

     Arrighi, V.; Mcewen, I. J.; Qian, H.; Prieto, M. B. S. The glass transition and interfacial layer in styrene-butadiene rubber containing silica nanofiller. Polymer 2003, 44(20), 6259-6266. doi: 10.1016/S0032-3861(03)00667-0

  10. [10]

      Stöckelhuber, K. W.; Svistkov, A. S.; Pelevin, A. G.; Heinrich, G. Impact of filler surface modification on large scale mechanics of styrene butadiene/silica rubber composites. Macromolecules 2011, 44(11), 4366-4381. doi: 10.1021/ma1026077

  11. [11]

      Yatsuyanagi, F.; Suzuki, N.; Ito, M.; Kaidou, H. Effects of secondary structure of fillers on the mechanical properties of silica filled rubber systems. Polymer 2001, 42(23), 9523-9529. doi: 10.1016/S0032-3861(01)00472-4

  12. [12]

      He, A. H.; Huang, B. C.; Jiao, S. K.; Hu, Y. L. Synthesis of a high-trans-1,4-butadiene/isoprene copolymers with supported titanium catalysts. J. Appl. Polym. Sci. 2003, 89(7), 1800-1807. doi: 10.1002/(ISSN)1097-4628

  13. [13]

      Jiang, X. B.; Zhang, Q. F.; He, A. H. Synthesis and characterization of trans-1,4-butadiene/isoprene copolymers: determination of sequence distribution and thermal properties. Chinese J. Polym. Sci. 2015, 33(6), 815-822. doi: 10.1007/s10118-015-1626-y

  14. [14]

      Zhang, Q. F.; Jiang, X. B.; He, A. H. Synthesis and characterization of trans-1,4-butadiene/isoprene copolymers: determination of monomer reactivity ratios and temperature dependence. Chinese J. Polym. Sci. 2014, 32(8), 1068-1076. doi: 10.1007/s10118-014-1467-0

  15. [15]

      He, A. H.; Yao, W.; Huang, B. C.; Huang, Y. Q.; Jiao, S. K. Synthesis of high trans-1,4-butadiene-isoprene copolymers by supported titanium catalysts. Acta Polymerica Sinica (in Chinese) 2002, 19-24.

  16. [16]

      Niu, Q. T.; Jiang, X. B.; He, A. H. Synthesis of the spherical trans-1,4-polyisoprene/trans-1,4-poly(butadiene-co-isoprene) rubber alloys within reactor, Polymer, 2014, 55, 2146-2152 doi: 10.1016/j.polymer.2014.03.013

  17. [17]

      Niu, Q. T.; Zou, C.; Liu, X. Y.; Wang, R. G.; He, A. H. Isothermal crystallization fractionation and fraction characterization of trans-1,4-poly(isoprene-co-butadiene). Polymer 2017, 109, 197-204. doi: 10.1016/j.polymer.2016.12.028

  18. [18]

      Wang, H.; Zou, C.; He, A. H. Characterization of trans-1,4-poly(butadiene-co-isoprene) copolymer rubber and its application as hump strip stocks in PCR tires. Acta Polymerica Sinica (in Chinese) 2015, 296-305.

  19. [19]

      He, A. H.; Yao, W.; Huang, B. C. Properties of a new synthetic rubber: High-trans-1,4-poly(butadiene-co-isoprene) rubber. J. Appl. Polym. Sci. 2004, 92(5), 2941-2948. doi: 10.1002/(ISSN)1097-4628

  20. [20]

      Wang, H.; Cui, H. H.; Ma, Y. S.; Zhang, J. P.; Song, L. Y.; He, A. H. The study of trans-1,4-poly(butadiene-co-isoprene) copolymer rubbers as tire belts stocks. Polym. Bull. 2016, (10), 61-67.

  21. [21]

      Wang, H.; Song, L. Y.; Ma, Y. S.; Wang, R. G.; He, A. H. The structures and properties of high performance PCR tire tread stock modified with trans-1,4-poly(butadiene-co-isoprene) copolymer rubber. Acta Polymerica Sinica (in Chinese) 2018, (3), 419-428. doi: 10.11777/j.issn1000-3304.2017.17101

  22. [22]

      Zhang, X. P.; Cui, H. H.; Song, L. Y.; Ren, H. C.; Wang, R. G.; He, A. H. Elastomer nanocomposites with superior dynamic mechanical properties via trans-1,4-poly(butadiene-co-isoprene) incorporation. Compos. Sci. Technol. 2018, 158, 156-163. doi: 10.1016/j.compscitech.2018.02.025

  23. [23]

      Wang, H.; Zhang, J. P.; Wang, R. G.; He, A. H. Properties of nature rubber/high trans-1,4-poly(butadiene-co-isoprene) rubber blends. China Rubber Ind. 2018, 65(2), 167-172.

  24. [24]

      Zhang, Z. P.; Wang, H.; Ren, H. C.; Wang, R. G.; He, A. H. Rubber nanocomposites with nano-scale phase structures and kinetically inhibited filler flocculation for enhanced integrated performances via reactive multi-block copolymer incorporation. Ind. Eng. Chem. Res. 2019, 58, 917−925 doi: 10.1021/acs.iecr.8b04958

  25. [25]

      Wang, H.; Zhang, X. P.; Nie, H. R.; Wang, R. G.; He, A. H. Multi-block copolymer as reactive multifunctional compatibilizer for NR/BR blends with desired network structures and dynamical properties: Compatibility, co-vulcanization and filler dispersion. Comps. Part A-Appl. S. 2019, 116, 197-205. doi: 10.1016/j.compositesa.2018.11.001

  26. [26]

      Boochathum, P.; Prajudtake, W. Vulcanization of cis- and trans-polyisoprene and their blends: Cure characteristics and crosslink distribution. Eur. Polym. J. 2001, 37(3), 417-427. doi: 10.1016/S0014-3057(00)00137-3

  27. [27]

      Niu, Q. T.; Li, W. T.; Liu, X. Y.; He, A. H. Trans-1,4-stereospecific copolymerization of isoprene and butadiene catalyzed by TiCl₄/MgCl₂ type Ziegler-Natta catalyst II. Copolymerization kinetics and mechanism. Polymer 2018, 143, 173-183. doi: 10.1016/j.polymer.2018.04.007

  28. [28]

      Li, W. T.; Nie, H. R.; Shao, H. F.; Ren, H. C.; He, A. H. Synthesis, chain structures and phase morphologies of trans-1,4-poly(butadiene-co-isoprene) copolymers. Polymer 2018, 156, 148-161. doi: 10.1016/j.polymer.2018.10.002

  29. [29]

      Marigo, A.; Marega, C.; Causin, V.; Ferrari, P. Influence of thermal treatments, molecular weight, and molecular weight distribution on the crystallization of β-isotactic polypropylene. J. Appl. Polym. Sci. 2010, 91(2), 1008-1012.

  30. [30]

      Benedetti, E.; D'Alessio, A.; Bertolutti, C.; Vergamini, P.; Fanti, N. D.; Pianca, M. Influence of molecular weight on the crystallization of poly(vinylidene fluoride). Polym. Bull. 1989, 22(5-6), 645-651. doi: 10.1007/BF00718947

  31. [31]

      Shao, H.; Wang, S.; He, A. The influence of molecular weight on high shear rate macroscopic rheological properties of polybutene-1 melts through rubber-processing analyzer. Polym. Bull. 2016, 73(11), 3209-3220. doi: 10.1007/s00289-016-1650-2

  32. [32]

      Yuan, M.; Galloway, J. A.; Hoffman, R. J. Influence of molecular weight on rheological, thermal, and mechanical properties of PEEK. Polym. Eng. Sci. 2011, 51(1), 94-102. doi: 10.1002/pen.v51.1

  33. [33]

      Jordens, K.; Wilkes, G. L.; Janzen, J.; Rohlfing, D. C.; Welch, M. B. The influence of molecular weight and thermal history on the thermal, rheological, and mechanical properties of metallocene-catalyzed linear polyethylenes. Polymer 2000, 41(19), 7175-7192. doi: 10.1016/S0032-3861(00)00073-2

  34. [34]

      Zuiderduin, W. C. J.; Homminga, D. S.; Huétink, H. J.; Gaymans, R. J. Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers. Polymer 2003, 44(20), 6361-6370. doi: 10.1016/S0032-3861(03)00635-9

  35. [35]

      Nunes, R. W.; Martin, J. R.; Johnson, J. F. Influence of molecular weight and molecular weight distribution on mechanical properties of polymers. Polym. Eng. Sci. 2010, 22(4), 205-228.

  36. [36]

      Ismail, H.; Freakley, P. K.; Sutherland, I.; Sheng, E. Effects of multifunctional additive on mechanical properties of silica filled natural rubber compound. Eur. Polym. J. 1995, 31(11), 1109-1117. doi: 10.1016/0014-3057(95)00066-6

  37. [37]

      Liu, X.; Zhao, S. H.; Zhang, X. Y.; Li, X. L.; Bai, Y. Preparation, structure, and properties of solution-polymerized styrene- butadiene rubber with functionalized end-groups and its silica-filled composites. Polymer 2014, 55(8), 1964-1976. doi: 10.1016/j.polymer.2014.02.067

  38. [38]

      Huneau, B.; Masquelier, I.; Marco, Y.; Saux, V. L.; Noizet, S.; Schiel, C.; Charrier, P. Fatigue crack initiation in a carbon black-filled natural rubber. Rubber Chem. Technol. 2016, 89, 126-141.

•