Photocatalytic CO<sub>2</sub> Reduction Using Ni<sub>2</sub>P Nanosheets

Citation: Pan Zhiming, Liu Minghui, Niu Pingping, Guo Fangsong, Fu Xianzhi, Wang Xinchen. Photocatalytic CO₂ Reduction Using Ni₂P Nanosheets[J]. Acta Physico-Chimica Sinica, 2020, 36(1): 190601. doi: 10.3866/PKU.WHXB201906014 shu

Ni₂P纳米片用于光催化二氧化碳还原

.
福州大学化学学院，能源与环境光催化国家重点实验室，福州 350116

通讯作者: 王心晨, xcwang@fzu.edu.cn

基金项目:
国家重点研发计划 2018YFA0209301

国家重点研发计划(2018YFA0209301)，长江学者奖励计划(T2016147)，国家自然科学基金(21425309, 21761132002, 21861130353)和111引智计划(D16008)资助项目

长江学者奖励计划 T2016147

国家自然科学基金 21425309

国家自然科学基金 21861130353

国家自然科学基金 21761132002

111引智计划 D16008

摘要: 光催化还原二氧化碳是人工光合作用的重要组成部分，但由于还原二氧化碳的活化能过高导致其应用受到极大地限制。这里，我们报道Ni₂P材料耦合光敏剂能够实现高效的光催化二氧化碳还原。此外，为了进一步的提高二氧化碳还原性能，一种合成超薄片层结构Ni₂P纳米片的策略被采用，目的提高其对二氧化碳吸附能力和降低二氧化碳还原的活化能。一系列物理化学表征被实施，比如X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和原子力显微镜(AFM)等。这些实验结果证实了厚度为1.5 nm的超薄Ni₂P纳米片被成功地制备。荧光实验结果揭示了Ni₂P纳米片能够更高效地促进光生载流子的分离。此外，电化学实验证明了Ni₂P纳米片具有较高的活性比表面积和电荷导电性，因此可以为二氧化碳转化提供更多的活性中心，从而加快其界面反应动力学。光催化二氧化碳还原实验结果展现了Ni₂P纳米片光催化一氧化碳的生成速率为64.8 μmol·h^-1，且其活性是Ni₂P颗粒光催化二氧化碳还原活性的四倍，同时它展现出较高化学稳定性。这项工作为超薄Ni₂P纳米片在光催化二氧化碳中的应用提供了新的思路。

关键词:

English

Photocatalytic CO₂ Reduction Using Ni₂P Nanosheets

State Key Laboratory of Photocatalysis on Energy and Environment, College of Chemistry, Fuzhou University, Fuzhou 350116, P. R. China

Corresponding author: Wang Xinchen, xcwang@fzu.edu.cn

Received Date: 04 June 2019
Accepted Date: 11 July 2019
Revised Date: 05 July 2019
Available Online: 15 January 2020
Fund Project:

The project was supported by the National Key Technology R&D Program of China (2018YFA0209301), the Chang Jiang Scholars Program of China (T2016147), the National Natural Science Foundation of China (21425309, 21761132002, 21861130353) and the 111 Project, China (D16008)

Abstract: Artificial photosynthesis is an ideal method for solar-to-chemical energy conversion, wherein solar energy is stored in the form of chemical bonds of solar fuels. In particular, the photocatalytic reduction of CO₂ has attracted considerable attention due to its dual benefits of fossil fuel production and CO₂ pollution reduction. However, CO₂ is a comparatively stable molecule and its photoreduction is thermodynamically and kinetically challenging. Thus, the photocatalytic efficiency of CO₂ reduction is far below the level of industrial applications. Therefore, development of low-cost cocatalysts is crucial for significantly decreasing the activation energy of CO₂ to achieving efficient photocatalytic CO₂ reduction. Herein, we have reported the use of a Ni₂P material that can serve as a robust cocatalyst by cooperating with a photosensitizer for the photoconversion of CO₂. An effective strategy for engineering Ni₂P in an ultrathin layered structure has been proposed to improve the CO₂ adsorption capability and decrease the CO₂ activation energy, resulting in efficient CO₂ reduction. A series of physicochemical characterizations including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and atomic force microscopy (AFM) were used to demonstrate the successful preparation of ultrathin Ni₂P nanosheets. The XRD and XPS results confirm the successful synthesis of Ni₂P from Ni(OH)₂ by a low temperature phosphidation process. According to the TEM images, the prepared Ni₂P nanosheets exhibit a 2D and near-transparent sheet-like structure, suggesting their ultrathin thickness. The AFM images further demonstrated this result and also showed that the height of the Ni₂P nanosheets is ca 1.5 nm. The photoluminescence (PL) spectroscopy results revealed that the Ni₂P material could efficiently promote the separation of the photogenerated electrons and holes in [Ru(bpy)₃]Cl₂·6H₂O. More importantly, the Ni₂P nanosheets could more efficiently promote the charge transfer and charge separation rate of [Ru(bpy)₃]Cl₂·6H₂O compared with the Ni₂P particles. In addition, the electrochemical experiments revealed that the Ni₂P nanosheets, with their high active surface area and charge conductivity, can provide more active centers for CO₂ conversion and accelerate the interfacial reaction dynamics. These results strongly suggest that the Ni₂P nanosheets are a promising material for photocatalytic CO₂ reduction, and can achieve a CO generation rate of 64.8 μmol·h^-1, which is 4.4 times higher than that of the Ni₂P particles. In addition, the XRD and XPS measurements of the used Ni₂P nanosheets after the six cycles of the photocatalytic CO₂ reduction reaction demonstrated their high stability. Overall, this study offers a new function for the 2D transition-metal phosphide catalysts in photocatalytic CO₂ reduction.

Key words:

Photocatalysis
/ Nanosheet
/ Ni₂P
/ CO₂ reduction
/ CO

1. [1]
  Asadi, M.; Kim, K.; Liu, C.; Addepalli, A. V.; Abbasi, P.; Yasaei, P.; Phillips, P.; Behranginia, A.; Cerrato, J. M.; Haasch, R.; et al. Science 2016, 353, 467. doi: 10.1126/science.aaf4767
2. [2]
  Wang, S.; Wang, X. Angew. Chem. Int. Ed. 2016, 55, 2308. doi: 10.1002/anie.201507145
3. [3]
  Qin, J.; Wang, S.; Ren, H.; Hou, Y.; Wang, X. Appl. Catal. B 2015, 179, 1. doi: 10.1016/j.apcatb.2015.05.005
4. [4]
  Wang, Y.; Zhang, Z.; Zhang, L.; Luo, Z.; Shen, J.; Lin, H.; Long, J.; Wu, J. C. S.; Fu, X.; Wang, X.; et al. J. Am. Chem. Soc. 2018, 140, 14595. doi: 10.1021/jacs.8b09344
5. [5]
  Pan, Z.; Zheng, Y.; Guo, F.; Niu, P.; Wang, X. ChemSusChem 2017, 10, 87. doi: 10.1002/cssc.201600850
6. [6]
  Liang, F.; Lindberg, P.; Lindblad, P. Sustain. Energy Fuels 2018, 2, 2583. doi: 10.1039/C8SE00281A
7. [7]
  Pan, Z.; Zhang, G.; Wang, X. Angew. Chem. Int. Ed. 2019, 58, 7102, 7102. doi: 10.1002/anie.201902634
8. [8]
  蓝志安, 王心晨.物理化学学报, 2017, 33, 457. doi: 10.3866/PKU.WHXB201701061Lan, Z. A.; Wang, X. C. Acta Phys. -Chim. Sin. 2017, 33, 457. doi: 10.3866/PKU.WHXB201701061
9. [9]
  Kuriki, R.; Sekizawa, K.; Ishitani, O.; Maeda, K. Angew. Chem. Int. Ed. 2015, 54, 2406. doi: 10.1002/anie.201411170
10. [10]
  Wu, L. Y.; Mu, Y. F.; Guo, X. X.; Zhang, W.; Zhang, Z. M.; Zhang, M.; Lu, T. B. Angew. Chem. Int. Ed. 2019, 58, 9491. doi: 10.1002/anie.201904537
11. [11]
  Zhai, Q.; Xie, S.; Fan, W.; Zhang, Q.; Wang, Y.; Deng, W.; Wang, Y. Angew. Chem. Int. Ed. 2013, 52, 5776. doi: 10.1002/anie.201301473
12. [12]
  Shown, I.; Samireddi, S.; Chang, Y. C.; Putikam, R.; Chang, P. H.; Sabbah, A.; Fu, F. Y.; Chen, W. F.; Wu, C. I.; Yu, T. Y.; et al. Nat. Commun. 2018, 9, 169. doi: 10.1038/s41467-017-02547-4
13. [13]
  Qin, J.; Wang, S.; Wang, X. Appl. Catal. B 2017, 209, 476. doi: 10.1016/j.apcatb.2017.03.018
14. [14]
  Kuriki, R.; Matsunaga, H.; Nakashima, T.; Wada, K.; Yamakata, A.; Ishitani, O.; Maeda, K. J. Am. Chem. Soc. 2016, 138, 5159. doi: 10.1021/jacs.6b01997
15. [15]
  Kang, Q.; Wang, T.; Li, P.; Liu, L.; Chang, K.; Li, M.; Ye, J. Angew. Chem. 2015, 127, 855. doi: 10.1002/ange.201409183
16. [16]
  Cometto, C.; Kuriki, R.; Chen, L.; Maeda, K.; Lau, T. C.; Ishitani, O.; Robert, M. J. Am. Chem. Soc. 2018, 140, 7437. doi: 10.1021/jacs.8b04007
17. [17]
  Pei, Z.; Li, H.; Huang, Y.; Xue, Q.; Huang, Y.; Zhu, M.; Wang, Z.; Zhi, C. Energy Environ. Sci. 2017, 10, 742. doi: 10.1039/C6EE03265F
18. [18]
  Wang, S.; Guan, B. Y.; Lou, X. W. Energy Environ. Sci. 2018, 11, 306. doi: 10.1039/C7EE02934A
19. [19]
  Zheng, Y.; Lin, L.; Ye, X.; Guo, F.; Wang, X. Angew. Chem. Int. Ed. 2014, 53, 11926. doi: 10.1002/anie.201407319
20. [20]
  Wang, S.; Wang, X. Appl. Catal. B 2015, 162, 494. doi: 10.1016/j.apcatb.2014.07.026
21. [21]
  Kuriki, R.; Yamamoto, M.; Higuchi, K.; Yamamoto, Y.; Akatsuka, M.; Lu, D.; Yagi, S.; Yoshida, T.; Ishitani, O.; Maeda, K. Angew. Chem. Int. Ed. 2017, 56, 4867. doi: 10.1002/anie.201701627
22. [22]
  Ouyang, T.; Wang, H. J.; Huang, H. H.; Wang, J. W.; Guo, S.; Liu, W. J.; Zhong, D. C.; Lu, T. B. Angew. Chem. Int. Ed. 2018, 57, 16480. doi: 10.1002/anie.201811010
23. [23]
  Ouyang, T.; Huang, H. H.; Wang, J. W.; Zhong, D. C.; Lu, T. B. Angew. Chem. Int. Ed. 2017, 56, 738. doi: 10.1002/anie.201610607
24. [24]
  Wang, S.; Wang, X. Angew. Chem. Int. Ed. 2015, 55, 2308. doi: 10.1002/anie.201507145
25. [25]
  Fu, J.; Zhu, B.; Jiang, C.; Cheng, B.; You, W.; Yu, J. Small 2017, 13, 1603938. doi: 10.1002/smll.201603938
26. [26]
  Apaydin, D. H.; Portenkirchner, E.; Jintanalert, P.; Strauss, M.; Luangchaiyaporn, J.; Sariciftci, N. S.; Thamyongkit, P. Sustain. Energy Fuels 2018, 2, 2747. doi: 10.1039/C8SE00422F
27. [27]
  Yang, Y.; Ajmal, S.; Zheng, X.; Zhang, L. Sustain. Energy Fuels 2018, 2, 510. doi: 10.1039/C7SE00371D
28. [28]
  Carenco, S.; Portehault, D.; Boissière, C.; Mézailles, N.; Sanchez, C. Adv. Mater. 2014, 26, 371. doi: 10.1002/adma.201303198
29. [29]
  Shi, Y.; Zhang, B. Chem. Soc. Rev. 2016, 45, 1529. doi: 10.1039/C5CS00434A
30. [30]
  Liu, Q.; Tian, J.; Cui, W.; Jiang, P.; Cheng, N.; Asiri, A. M.; Sun, X. Angew. Chem. 2014, 126, 6828. doi: 10.1002/ange.201404161
31. [31]
  Tian, J.; Liu, Q.; Asiri, A. M.; Sun, X. J. Am. Chem. Soc. 2014, 136, 7587. doi: 10.1021/ja503372r
32. [32]
  Li, D.; Baydoun, H.; Verani, C. N.; Brock, S. L. J. Am. Chem. Soc. 2016, 138, 4006. doi: 10.1021/jacs.6b01543
33. [33]
  Yu, X. Y.; Feng, Y.; Guan, B.; Lou, X. W.; Paik, U. Energy Environ. Sci. 2016, 9, 1246. doi: 10.1039/C6EE00100A
34. [34]
  Stern, L. A.; Feng, L.; Song, F.; Hu, X. Energy Environ. Sci. 2015, 8, 2347. doi: 10.1039/C5EE01155H
35. [35]
  Pan, Z.; Niu, P.; Hou, Y.; Fang, Y.; Liu, M.; Wang, X. ChemSusChem 2019, 12, 1911. doi: 10.1002/cssc.201801691
36. [36]
  Indra, A.; Acharjya, A.; Menezes, P. W.; Merschjann, C.; Hollmann, D.; Schwarze, M.; Aktas, M.; Friedrich, A.; Lochbrunner, S.; Thomas, A.; et al. Angew. Chem. Int. Ed. 2017, 56, 1653. doi: 10.1002/anie.201611605
37. [37]
  Sun, Z.; Zheng, H.; Li, J.; Du, P. Energy Environ. Sci. 2015, 8, 2668. doi: 10.1039/C5EE01310K
38. [38]
  Sun, X.; Lu, L.; Zhu, Q.; Wu, C.; Yang, D.; Chen, C.; Han, B. Angew. Chem. Int. Ed. 2018, 57, 2427. doi: 10.1002/anie.201712221
39. [39]
  Calvinho, K. U. D.; Laursen, A. B.; Yap, K. M. K.; Goetjen, T. A.; Hwang, S.; Murali, N.; Mejia-Sosa, B.; Lubarski, A.; Teeluck, K. M.; Hall, E. S.; et al. Energy Environ. Sci. 2018, 11, 2550. doi: 10.1039/C8EE00936H
40. [40]
  Fu, Z. C.; Xu, R. C.; Moore, J. T.; Liang, F.; Nie, X. C.; Mi, C.; Mo, J.; Xu, Y.; Xu, Q. Q.; Yang, Z.; et al. Chem. Eur. J. 2018, 24, 4273. doi: 10.1002/chem.201800335
41. [41]
  Wang, S.; Guan, B. Y.; Lu, Y.; Lou, X. W. D. J. Am. Chem. Soc. 2017, 139, 17305. doi: 10.1021/jacs.7b10733
42. [42]
  Wang, S.; Guan, B. Y.; Lou, X. W. D. J. Am. Chem. Soc. 2018, 140, 5037. doi: 10.1021/jacs.8b02200
43. [43]
  Chen, Y.; Jia, G.; Hu, Y.; Fan, G.; Tsang, Y. H.; Li, Z.; Zou, Z. Sustain. Energy Fuels 2017, 1, 1875. doi: 10.1039/C7SE00344G
44. [44]
  Li, F.; Chen, L.; Knowles, G. P.; MacFarlane, D. R.; Zhang, J. Angew. Chem. Int. Ed. 2017, 56, 505. doi: 10.1002/anie.201608279
45. [45]
  Tu, W.; Zhou, Y.; Liu, Q.; Tian, Z.; Gao, J.; Chen, X.; Zhang, H.; Liu, J.; Zou, Z. Adv. Funct. Mater. 2012, 22, 1215. doi: 10.1002/adfm.201102566
46. [46]
  Cao, S.; Shen, B.; Tong, T.; Fu, J.; Yu, J. Adv. Funct. Mater. 2018, 28, 1800136. doi: 10.1002/adfm.201800136
47. [47]
  Ou, H.; Lin, L.; Zheng, Y.; Yang, P.; Fang, Y.; Wang, X. Adv. Mater. 2017, 29, 1700008. doi: 10.1002/adma.201700008
48. [48]
  Pu, Z.; Wei, S.; Chen, Z.; Mu, S. Appl. Catal. B 2016, 196, 193. doi: 10.1016/j.apcatb.2016.05.027
49. [49]
  Gao, C.; Meng, Q.; Zhao, K.; Yin, H.; Wang, D.; Guo, J.; Zhao, S.; Chang, L.; He, M.; Li, Q.; et al. Adv. Mater. 2016, 28, 6485. doi: 10.1002/adma.201601387
50. [50]
  Jiang, J.; Zhao, K.; Xiao, X.; Zhang, L. J. Am. Chem. Soc. 2012, 134, 4473. doi: 10.1021/ja210484t
51. [51]
  Yu, J.; Low, J.; Xiao, W.; Zhou, P.; Jaroniec, M. J. Am. Chem. Soc. 2014, 136, 8839. doi: 10.1021/ja5044787
52. [52]
  Jia, J.; Qian, C.; Dong, Y.; Li, Y. F.; Wang, H.; Ghoussoub, M.; Butler, K. T.; Walsh, A.; Ozin, G. A. Chem. Soc. Rev. 2017, 46, 4631. doi: 10.1039/C7CS00026J
53. [53]
  Li, F.; Xue, M.; Li, J.; Ma, X.; Chen, L.; Zhang, X.; MacFarlane, D. R.; Jie, Z. Angew. Chem. Int. Ed. 2017, 56, 14718. doi: 10.1002/anie.201710038
54. [54]
  Zhao, Y.; Chen, G.; Bian, T.; Zhou, C.; Waterhouse, G. I. N.; Wu, L. Z.; Tung, C. H.; Smith, L. J.; O'Hare, D.; Zhang, T. Adv. Mater. 2015, 27, 7824. doi: 10.1002/adma.201503730
55. [55]
  Yao, T.; Liu, L.; Xiao, C.; Zhang, X.; Liu, Q.; Wei, S.; Xie, Y. Angew. Chem. Int. Ed. 2013, 52, 7554. doi: 10.1002/anie.201302891
56. [56]
  Popczun, E. J.; McKone, J. R.; Read, C. G.; Biacchi, A. J.; Wiltrout, A. M.; Lewis, N. S.; Schaak, R. E. J. Am. Chem. Soc. 2013, 135, 9267. doi: 10.1021/ja403440e
57. [57]
  Tang, C.; Zhang, R.; Lu, W.; Wang, Z.; Liu, D.; Hao, S; Du, G.; Asiri, A.M.; Sun, X. Angew. Chem. Int. Ed. 2017, 56, 842. doi: 10.1002/anie.201608899
58. [58]
  Bai, Y.; Zhang, H.; Li, X.; Liu, L.; Xu, H.; Qiu, H.; Wang, Y. Nanoscale 2015, 7, 1446. doi: 10.1039/C4NR05862C
59. [59]
  Wang, S.; Wang, X. Appl. Catal. B 2015, 162, 494. doi: 10.1016/j.apcatb.2014.07.026
60. [60]
  Chen, Y.; Wang, B.; Lin, S.; Zhang, Y.; Wang, X. J. Phys. Chem. C 2014, 118, 29981. doi: 10.1021/jp510187c
61. [61]
  Wang, S.; Hou, Y.; Wang, X. ACS Appl. Mater. Interfaces 2015, 7, 4327. doi: 10.1021/am508766s

扫一扫看文章

计量

PDF下载量: 14
文章访问数: 1133
HTML全文浏览量: 92

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Ni₂P纳米片用于光催化二氧化碳还原

通讯作者: 王心晨, xcwang@fzu.edu.cn

English

Photocatalytic CO₂ Reduction Using Ni₂P Nanosheets

Corresponding author: Wang Xinchen, xcwang@fzu.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

Ni2P纳米片用于光催化二氧化碳还原

通讯作者: 王心晨, xcwang@fzu.edu.cn

English

Photocatalytic CO2 Reduction Using Ni2P Nanosheets

Corresponding author: Wang Xinchen, xcwang@fzu.edu.cn

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

Ni₂P纳米片用于光催化二氧化碳还原

Photocatalytic CO₂ Reduction Using Ni₂P Nanosheets

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs