Reactivity of 2-Phenylimino-Functionalized Indolyl Europium Amide with Diaryl-Substitued Formamidines

Zhi-Jun FENG Qiao-Yu CUI Yun WEI Shuang-Liu ZHOU Yun-Jun WU Shao-Yin WANG

Citation:  FENG Zhi-Jun, CUI Qiao-Yu, WEI Yun, ZHOU Shuang-Liu, WU Yun-Jun, WANG Shao-Yin. Reactivity of 2-Phenylimino-Functionalized Indolyl Europium Amide with Diaryl-Substitued Formamidines[J]. Chinese Journal of Inorganic Chemistry, 2017, 33(1): 169-174. doi: 10.11862/CJIC.2017.006 shu

2-苯亚胺官能化吲哚基铕胺基配合物与芳基取代甲脒的反应性

    通讯作者: 冯志君, fengzhijun73@163.com
  • 基金项目:

    国家级大学生创新训练项目 201510368021

    皖南医学院博士科研启动基金 rcqd201613

摘要: 2-(苯亚胺基次甲基)吲哚铕胺基配合物[η1η1-2-(C6H5NH=CH)C8H5N]2Eu[N(SiMe32](1)与二芳基取代甲脒(2, 6-R2C6H3N=CHNH(C6H3R2-2, 6)(R=iPr(2), Me(3))经过配体交换反应, 分别得到了含吲哚基脒基铕配合物[η1η1-2-(C6H5NH=CH)C8H5N]Eu[(η3-2, 6-iPr2C6H3)N=CHN(C6H3iPr2-2, 6)][N(SiMe32](4)和含脒基的稀土铕配合物[(η3-2, 6-Me2C6H3)N=CHN(C6H3Me2-2, 6)]2Eu[N(SiMe32](5)。结果表明, 脒基的位阻显著影响了吲哚基稀土金属胺基配合物与二芳基取代甲脒的配体交换反应。配合物45通过IR、元素分析和X射线单晶衍射分析进行了表征。

English

  • 

    Continuing our investigation on the amino, imino-functionalized indolyl ancillary ligand system, we have synthesized europium(Ⅲ) amido complex having 2-(phenyliminomethine)indoly ligands[21].Encouraged by above-mentioned results, we further investigated the reactivity of the indolyl europium(Ⅲ) amide with formamidines, as shown in Scheme 1.According to our experimental results, when treating of europium(Ⅲ) complex containing imino-functionalized indolyl groups and N(SiMe3)2 group as ancillary ligands with formamidines, the attack occurs primarily onto the Eu-N bonds between indolyl ligand and central metal.Moreover, the results also made it clear that the reactivity of europium(Ⅲ) amido complex having the functionalized indolyl ligands and the structures of the resultants are significantly dependent on the steric hindrance of formamidines.Herein, we will report these results and structural studies of new complexes.

    Recently, we have reported the reactivity of 2-(2, 6-diisopropylphenylaminomethine)indolyl europium(Ⅱ) amido complex with formamidines having different spatial hindrance afforded novel complexes incorpor-ating indolyl ligands bonded with metal in novel μ-η3:η1:η1 and μ-η2:η1:η1 bonding manners[19], respectively.In addition, we have also reported the reactivities of rare-earth metal monoalkyl complexes incorporating bidentate indolyl ligands with PhSiH3 or amidine, and have obtained the first example of trivalent rare-earth metal complexes having an amido-functionalized indolyl ligand bonded to a metal in the μ-η6:η1:η1 fashions[20].

    During the course of lanthanide chemistry studies, novel reactivity of rare-earth metal complexes has been one of the most important research fields[1-3], because such kinds of reactions are usually the basis for lots of important catalytic procedures, organic transformations and proposed pathway for the formation of lanthanide compounds.To date, much effort has been devoted to study the reactivity of rare-earth metal complexes[4-15], which involves a number of small molecular substrates including H2[4], CO[5], CO2[6-9], alkane[10], alkene[8, 11], alkyne[11], amine[9], carbodiimide[12], silane[4, 13], phosphine[14], nitrile[7-8], isocyanate[8-9], ami-dine[13], carbonyl compound[7, 11], heterocyclic compound[11] and so on[15].Among them, amidines, used as ligands or substrates for reactivity studies[16-18], have drawn much attention due to being easily prepared and tuned sterically and electronically.Amidines have played an important role in the investigation on the influence of spatial hindrance and electronic effect on the synthesis, bonding modes, structures and performances of rare-earth metal complexes.Thus, reactivity studies between indolyl rare-earth metal amido complexes with formamidines are still the interesting work.

    1    Experimental

    1.1    Materials and methods

    All manipulations of air- and moisture-sensitive materials were performed using Schlenk techniques or in a glovebox under an atmosphere of purified argon.Toluene and hexane were refluxed and freshly distilled over sodium benzophenone ketyl under argon prior to use.[2-(C6H5NH=CH)C8H5N]2Eu[N(SiMe3)2] (1)[21] and 2, 6-R2C6H3N=CHNH(C6H3R2-2, 6) (R=iPr (2), Me (3))[22] were prepared according to the literature methods.Elemental analyses data were obtained on a Perkin-Elmer 2400 Series Ⅱ elemental analyzer and analyses were carried out in the microanalytical laboratory of Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences.IR spectra were run on a Shimadzu FTIR-8400s spectrometer (KBr pellet).Melting points were determined in sealed capillaries and are uncorrected.

    1.2    Syntheses of complexes

    1.3    X-ray crystallographic analyses

    Single crystals of complexes 4 and 5 suitable for X-ray diffraction studies were sealed in thin-walled glass capillaries under argon.Diffraction was performed on a Bruker SMART CCD area detector diffractometer using graphite-monochromated Mo Kα radiation (λ=0.071 073 nm).An empirical absorption correction was applied using the SADABS program[23].All structures were solved by direct methods, completed by subsequent difference Fourier syntheses, refined anisotropically for all nonhydrogen atoms by full-matrix least-squares calculations on F 2 using the SHELXTL program package[24]. All hydrogen atoms were refined using a riding model.A summary of the crystallographic data and selected experimental information are listed in Table 1, while the selected bond lengths and angles are summarized in Table 2.

    Table2. Selected bond lengths (nm) and angles (°) for complexes 4 and 5
    Table2. Selected bond lengths (nm) and angles (°) for complexes 4 and 5
    Table1. Crystallographic data and structure refinement for complexes 4 and 5
    Table1. Crystallographic data and structure refinement for complexes 4 and 5

    CCDC: 1496184, 4; 1496185, 5.

    1.2.1    Synthesis of [η1:η1-2-(C6H5NH=CH)C8H5N]Eu [(η3-2, 6-iPr2C6H3)N=CHN(C6H3iPr2-2, 6)] [N(SiMe3)2](4)

    A Schleck flask was charged with complex 1 (0.90 g, 1.20 mmol), 2, 6-iPr2C6H3N=CHNH(C6H3iPr2-2, 6) (2) (0.43 g, 1.20 mmol) and toluene (30 mL).The reaction mixture was stirred at 70 ℃ for 16 h.The red-brown solution was evaporated to dryness and extracted with n-hexane (14 mL).Orange-red crystals that were suitable for X-ray diffraction were obtained upon crystallization from hexane at 0 ℃ after a few days (0.59 g, 55%).m.p.187 ℃.Anal.Calcd.for C46H65N5Si2Eu(%): C, 61.65; H, 7.31; N, 7.81.Found(%): C, 61.16; H, 7.63; N, 8.22.IR (KBr pellet, cm-1): 2 959 (w), 2 865 (w), 1 660 (s), 1 614 (s), 1 589 (s), 1 483 (m), 1 445 (m), 1 423 (m), 1 298 (w), 1 194 (w), 1 065 (w), 957 (w), 908 (w), 872 (w), 800 (m), 767 (m), 753 (m), 737 (m), 695 (s).

    1.2.2    Synthesis of [(η3-2, 6-Me2C6H3)N=CHN(C6H3Me2-2, 6)]2Eu[N(SiMe3)2](5)

    The synthesis of complex 5 was same to that of complex 4 except that 2, 6-Me2C6H3N=CHNH(C6H3Me2-2, 6) (3) (0.60 g, 2.40 mmol) was used instead of com-pound 2.Yield: 0.55 g, 56%.m.p.205 ℃.Anal.Calcd.for C40H58N5Si2Eu(%): C, 58.80; H, 7.16; N, 8.57.Found(%): C, 58.38; H, 7.42; N, 8.68.IR (KBr pellet, cm-1): 2 961 (w), 2 854 (w), 1 661 (s), 1 613 (s), 1 589 (s), 1 483 (m), 1 444 (m), 1 425 (m), 1 298 (w), 1 195 (w), 1 066 (w), 955 (w), 906 (w), 870 (w), 799 (m), 765 (m), 750 (m), 737 (m), 696 (s).

    2    Results and discussion

    Figure 1. Molecular structure of 4 with 30% thermal ellipsoids

    Figure 2. Molecular structure of 5 with 30% thermal ellipsoids

    Complex 4 crystallizes in a triclinic crystal system with space group P1.X-ray analyses revealed that 4 is five-coordinated mononuclear complex.As shown in Fig.1, the central Eu3+ is coordinated by a bidentate indolyl ligand in η1:η1 hapticities, an formamidinato ligand in an η3 fashion and N3)2 ligand adopting a distorted trigonal bipyramid configuration similar to that of complex 1[21].The C(28)-N(3) length of 0.132 0(8) nm and C(28)-N(4) of 0.131 0(7) nm has become average and close to the value between carbon-carbon length of single bond and that of double bond, showing the characteristic of delocalized bond and indicating that the formamidinato ligand is bonded to the Eu3+ with an η3 manner.Among the Eu-N lengths in complex 4, the Eu(1)-N(2) length of 0.251 0(6) nm of the appendant arm is significantly longer than the others (Eu(1)-N(1) 0.234 3(6) nm, Eu(1)-N(3) 0.240 2(5) nm, Eu(1)-N(4) 0.243 6(5) nm, Eu(1)-N(5) 0.225 0(5) nm), and close to the corresponding value of 0.252 5(3) nm in complex 1 and that of 0.256 5(2) nm in complex [2-(tBuN=CH)C8H5N]Eu[N3)2]2[21], indicating coor-dination nature of the N2 atom.The bond angles of N(5)-Eu(1)-N(1), N(5)-Eu(1)-N(3), N(1)-Eu(1)-N(3), N(1)-Eu(1)-N(4) and N(5)-Eu(1)-N(2) are respectively 110.20(19)°, 113.13(19)°, 104.65(19)°, 111.82(18)° and 96.80(19)°.

    As shown in Scheme 1, reaction of europium complex 1 with the sterically bulky formamidine [(2, 6-iPr2C6H3)NCHNH(C6H3iPr2-2, 6)] (2) gave europium complex formulated as [η1:η1-2-(C6H5NH=CH)C8H5N]Eu[(η3-2, 6-iPr2C6H3)N=CHN(C6H3iPr2-2, 6)][N(SiMe3)2] (4), containing an indolyl ligand and an formamidinato ligand via ligand exchange process.Treatment of europium complex 1 with the less bulky formamidine 2, 6-Me2C6H3N=CHNH(C6H3Me2-2, 6) (3) afforded euro-pium complex formulated as [(η3-2, 6-Me2C6H3)N=CHN(C6H3Me2-2, 6)]2Eu[N3)2] (5), only incorporating formamidinato ligands and N3)2. Complexes 4 and 5 are extremely sensitive to air and moisture.They were characterized by spectroscopic and elemental analyses, and their structures were further elucidated by X-ray diffraction study.The structures of 4 and 5 are individually displayed in Fig.1 and 2, while selected bond lengths and angles are given in Table 2.

    Complex 5, crystallizing in a monoclinic crystal system with space group C2/c, is also five-coordinated.Differently, the coordination environment of the central metal is completed by two formamidino groups and one -N3)2 ligand as a centrosymmetric tetragonal pyramid arrangement, in which N3 atom of -N3)2 group occupies the vertex, as shown in Fig.2. Given that the C(9)-N(1)i, N(1)-C(9)i lengths of 0.131 3(3) nm, C(9)-N(2)i of 0.132 0(3) nm and N(2)- C(9)i of 0.132 1(3) nm, the bonding mode of formamidino ligand bonded to Eu3+ is described as an η3 fashion.The Eu(1)-N(1)i length of 0.240 16(19) nm or Eu(1)- N(2)i length of 0.242 4(2) nm is in accordance with the corresponding Eu(1)-N(1) length of 0.240 16(19) nm or Eu(1)-N(2) length of 0.242 4(2) nm, indicating a centrosymmetric geometry.Moreover, the centrosym-metric structure is also deduced by the bond angles of N(3)-Eu(1)-N(2)i of 103.84(5)°, N(3)-Eu(1)-N(1)i of 122.32(5)°, N(3)-Eu(1)-N(1) of 122.32(5)° and N(3)- Eu(1)-N(2) of 103.84(5)°.Thus, the result suggested that imino-functionalized indolyl ligands in complex 1 are completely replaced by the less bulky formamidino groups, while the geometry of the resultant complex 5 is obviously different from that of complex 1.

    3    Conclusions

    In summary, we have studied the reactivity of europium(Ⅲ) amido complex having 2-(phenylimino-methine)indoly ligands [2-(C6H5NH=CH)C8H5N]2Eu[N3)2] (1) with formamidines.Reaction of 1 with the sterically bulky formamidine [(2, 6-iPr2C6H3)NCHNH(C6H3iPr2-2, 6)] or the less bulky formamidine 2, 6-Me2C6H3N=CHNH(C6H3Me2-2, 6) gave complexes [η1:η1-2-(C6H5NH=CH)C8H5N]Eu[(η3-2, 6-iPr2C6H3)N = CHN(C6H3iPr2-2, 6)][N3)2] (4) and [(η3-2, 6-Me2C6H3)N=CHN(C6H3Me2-2, 6)]2Eu[N3)2] (5), respectively.The results showed that the steric hindrance of organic molecular substrates have significantly effects on the reactivity of rare-earth metal amido complexes containing imino-functionalized indolyl ligands and the structures of the resultant new lanthanide complexes.Further study on the reactivity of the rare-earth metal compounds with the related indolyl ligands is in progress in our laboratory and will be reported soon.

    1. [1]

      Bochkarev M N. Chem. Rev., 2002,102:2089-2117 doi: 10.1021/cr010329i

    2. [2]

      Edelmann F T, Freckmann D M M, Schumann H. Chem. Rev., 2002,102:1851-1896 doi: 10.1021/cr010315c

    3. [3]

      Li T S, Kaercher S, Roesky P W. Chem. Soc. Rev., 2014,43: 42-57 doi: 10.1039/C3CS60163C

    4. [4]

      Fegler W, Venugopal A, Kramer M, et al. Angew. Chem. Int. Ed., 2015,54:1724-1736 doi: 10.1002/anie.201406677

    5. [5]

      Shima T, Hou Z. J. Am. Chem. Soc., 2006,128:8124-8125 doi: 10.1021/ja062348l

    6. [6]

      LeBlanc F A, Piers W E, Parvez M. Angew. Chem. Int. Ed., 2014,53:789-792 doi: 10.1002/anie.201309094

    7. [7]

      Xu L, Wang Y C, Xi Z F, et al. Chem. Eur. J., 2015,21:6686-6689 doi: 10.1002/chem.201500387

    8. [8]

      Chu J X, Lu E L, Chen Y F, et al. Angew. Chem. Int. Ed., 2011,50:7677-7680 doi: 10.1002/anie.201102267

    9. [9]

      Hong J Q, Zhang L X, Zhou X G, et al. Organometallics, 2013,32:7312-7322 doi: 10.1021/om400787j

    10. [10]

      Cole M L, Deacon G B, Junk P C, et al. Organometallics, 2013,32:1370-1378 doi: 10.1021/om301048b

    11. [11]

      Arnold P L, McMullon M W, Rieb J, et al. Angew. Chem. Int. Ed., 2015,54:82-100 doi: 10.1002/anie.201404613

    12. [12]

      Xu L, Wei J N, Xi Z F, et al. Chem. Eur. J., 2015,21:15860-15866 doi: 10.1002/chem.v21.44

    13. [13]

      Chu J X, Lu E L, Chen Y F, et al. Organometallics, 2013, 32:1137-1140 doi: 10.1021/om3010349

    14. [14]

      Wang K, Luo G, Zhang L X, et al. Angew. Chem. Int. Ed., 2014,53:1053-1056 doi: 10.1002/anie.201307422

    15. [15]

      Rong W, He D, Cui D M, et al. Chem. Commun., 2015,51: 5063-5065 doi: 10.1039/C4CC07262F

    16. [16]

      Edelmann F T. Chem. Soc. Rev., 2009,38:2253-2268 doi: 10.1039/b800100f

    17. [17]

      Yao S, Chan H S, Lee H K, et al. Inorg. Chem., 2009,48: 9936-9946 doi: 10.1021/ic901327m

    18. [18]

      Cole M L, Deacon G B, Junk P C, et al. Chem. Eur. J., 2013,19:1410-1420 doi: 10.1002/chem.201202861

    19. [19]

      Feng Z J, Zhu X C, Wang S W, et al. Inorg. Chem., 2013, 52:9549-9556 doi: 10.1021/ic401515q

    20. [20]

      Zhang G C, Wang S W, Zhou S L, et al. Organometallics, 2015,34:4251-4261 doi: 10.1021/acs.organomet.5b00467

    21. [21]

      Feng Z J, Wei Y, Wang S W, et al. Dalton Trans., 2015,44: 20502-20513 doi: 10.1039/C5DT03214H

    22. [22]

      Hirano K, Urban S, Wang C, et al. Org. Lett., 2009:1019-1022

    23. [23]

      Sheldrick G M. SADABS, A Program for Empirical Absorption Correction of Area Detector Data, University of Göttingen, Germany, 1996.

    24. [24]

      Sheldrick G M. SHELXTL 5.10 for Windows NT, Structure Determination Software Programs, Bruker Analytical X-ray Systems, Inc., Madison, WI, 1997.

  • Figure 1  Molecular structure of 4 with 30% thermal ellipsoids

    All hydrogen atoms are omitted for clarity

    Figure 2  Molecular structure of 5 with 30% thermal ellipsoids

    All hydrogen atoms are omitted for clarity; Symmetry codes: i -x+1,y,-z+1/2

    Table 1.  Crystallographic data and structure refinement for complexes 4 and 5

    下载: 导出CSV

    Table 2.  Selected bond lengths (nm) and angles (°) for complexes 4 and 5

    下载: 导出CSV
  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  712
  • HTML全文浏览量:  88
文章相关
  • 收稿日期:  2016-08-14
  • 修回日期:  2016-11-02
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章