无溶剂法合成ZSM-5/SiC整体式催化剂制备生物燃料

引用本文: 朱秋艳, 王叶青, 王凌翔, 杨志远, 王亮, 孟祥举, 肖丰收. 无溶剂法合成ZSM-5/SiC整体式催化剂制备生物燃料[J]. 催化学报, 2020, 41(7): 1118-1124. doi: 10.1016/S1872-2067(20)63550-1 shu

Citation: Qiuyan Zhu, Yeqing Wang, Lingxiang Wang, Zhiyuan Yang, Liang Wang, Xiangju Meng, Feng-Shou Xiao. Solvent-free crystallization of ZSM-5 zeolite on SiC foam as a monolith catalyst for biofuel upgrading[J]. Chinese Journal of Catalysis, 2020, 41(7): 1118-1124. doi: 10.1016/S1872-2067(20)63550-1 shu

无溶剂法合成ZSM-5/SiC整体式催化剂制备生物燃料

a 浙江大学化学系, 浙江省应用化学重点实验室, 浙江杭州 310028;
b 浙江大学化工与生物工程学院, 教育部生物质化工工程重点实验室, 浙江杭州 310028
基金项目:
国家重点研发计划（2018YFD1000806-01）；国家自然科学基金（21822203，91645105，91634201）；浙江省自然科学基金（LR18B030002）；中央高校资助.

摘要: 传统合成整块载体负载分子筛催化剂的方法是水热法,这样往往伴随水资源浪费和釜内空间利用率低的问题.本文报道了应用无溶剂法在蜂窝结构的碳化硅(SiC)表面原位生长ZSM-5分子筛.进一步采用该法将Pd纳米粒子限域在ZSM-5分子筛内,合成Pd@ZSM-5/SiC双功能催化剂,并在油酸甲酯加氢反应中表现出较高的活性和高碳烷烃选择性.结果发现,Pd@ZSM-5/SiC表现出高选择性和耐久性,这归因于SiC优异的传质和导热特性.
X射线衍射、扫描电子显微镜和氮气吸附等结果表明,通过无溶剂法合成的分子筛具有很高的结晶度和纯度；高分辨透射电镜结果表明,在Pd@ZSM-5和Pd@ZSM-5/SiC催化剂中,Pd纳米粒子均被良好封装,并且粒径无明显差别,因此排除金属活性中心粒径的干扰.
油酸甲酯的直接加氢脱氧/脱羧可以制备具有高附加值的长链碳氢化合物,而碳氢化合物的裂解通常会伴随着低碳化合物等副产物的生成.我们比较了两种催化剂在350–500℃的转化率和高碳烷烃的选择性差异.在相同反应条件下,Pd@ZSM-5/SiC催化剂上油酸甲酯转化率始终高于Pd@ZSM-5.例如在450℃,Pd@ZSM-5和Pd@ZSM-5/SiC的转化率分别为97.6%和78.2%,当温度提升至500℃,Pd@ZSM-5/SiC将油酸甲酯完全转化,而Pd@ZSM-5的转化率仅为88%.在350℃时,Pd@ZSM-5/SiC以脱羧反应为主,其中C₁₇和C₁₈的选择性分别为67.3%和20.1%,C_6-12和C_13-16选择性分别为2.4%和5.0%.相比之下,Pd@ZSM-5催化剂C₁₇的选择性为39.4%,C₁₈的选择性为13.2%,C_6-12和C_13-16选择性分别为20.2%和20.6%.由此可见,Pd@ZSM-5对于高附加值的长链碳氢化合物的选择性远低于Pd@ZSM-5/SiC;这可能与在Pd@ZSM-5催化剂上更容易发生烷烃裂解副反应有关.值得注意的是,虽然升高温度会促进碳氢化合物的裂解,但是在Pd@ZSM-5/SiC催化剂上高碳化合物依然较多.例如,在500℃时,裂解是Pd@ZSM-5催化剂上的主要反应,C_1-5的选择性高达50.1%,C_6-12的选择性高达37.0%;而在Pd@ZSM-5/SiC的产物中,C_13-16的选择性为40.0%,C₁₇-18的选择性更是高达16.7%.此外,在450℃的油酸甲酯加氢连续实验中,Pd@ZSM-5/SiC比Pd@ZSM-5表现出更好的耐久性,且催化剂失活后可以通过焙烧手段再生.
上述结果表明,Pd@ZSM-5/SiC催化剂有利于加氢脱氧/脱羧反应制备有价值的高碳烃产品,更能抑制裂解副反应的进行.相比之下,传统的粉末催化剂对裂解产物仍具有较高的选择性,尤其是在较高的反应温度下.SiC载体的引入有利于高碳产物的传质,从而抑制了裂解反应.此外,碳化硅良好的导热性可以有效地防止催化剂在反应中的过热,同样有利于抑制碳氢化合物的裂解.

关键词:

English

Solvent-free crystallization of ZSM-5 zeolite on SiC foam as a monolith catalyst for biofuel upgrading

a Key Laboratory of Applied Chemistry of Zhejiang Province, Department of Chemistry, Zhejiang University, Hangzhou 310028, Zhejiang, China;
b Key Laboratory of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310028, Zhejiang, China
Received Date: 29 September 2019
Fund Project:
This work was supported by the National Key Research and Development Program of China (2018YFD1000806-01), National Natural Science Foundation of China (21822203, 91645105, 91634201), Natural Science Foundation of Zhejiang Province (LR18B030002), and the funding of central universities.

Abstract: Conventional synthesis of monolith-supported zeolite catalysts is based on a hydrothermal strategy. Here, we report a solvent-free crystallization process to coat ZSM-5 zeolite crystals on a monolithic SiC foam with a honeycomb structure (ZSM-5/SiC). Characterizations of the ZSM-5/SiC by scanning electron microscopy, N₂ sorption, and X-ray diffraction indicate that the zeolite sheath has been ideally coated on the surface of the SiC foam with high purity and crystallinity. Fixing Pd nanoparticles within the ZSM-5 zeolite crystals delivers a bifunctional Pd@ZSM-5/SiC catalyst, which exhibits high activity and selectivity toward diesel range paraffins in the hydrodeoxygenation of methyl oleate, a model molecule for biofuel. In comparison to the powder Pd@ZSM-5, the Pd@ZSM-5/SiC monolith catalyst shows more efficiency, which is attributed to the fast mass transfer and high heat conductivity on the honeycomb SiC structure. The durability test indicates that the Pd@ZSM-5/SiC catalyst is stable under the reaction and high-temperature regeneration conditions.

Key words:

1. [1] K. Cheng, B. Gu, X. Liu, J. Kang, Q. Zhang, Y. Wang, Angew. Chem. Int. Ed., 2016, 55, 4725-4728.
2. [2] C. Wang, E. Guan, L. Wang, X. Chu, Z. Wu, J. Zhang, Z. Yang, Y. Jiang, L. Zhang, X. Meng, B. C. Gates, F.-S. Xiao, J. Am. Chem. Soc., 2019, 141, 8482-8488.
3. [3] L. Zhang, L. Chen, Y. Li, Y. Peng, F. Chen, L. Wang, C. Zhang, X. Meng, H. He, F.-S. Xiao, Appl. Catal. B, 2017, 219, 200-208.
4. [4] E. Moradiyan, R. Halladj, S. Askari, Ind. Eng. Chem. Res., 2018, 57, 1871-1882.
5. [5] L. Guo, Y. Fan, X. Bao, G. Shi, H. Liu, J. Catal., 2013, 301, 162-173.
6. [6] Y. Wang, S. L. Chen, Y. L. Gao, Y. Q. Cao, Q. Zhang, W. K. Chang, J. B. Benziger, ACS Catal., 2017, 7, 5572-5584.
7. [7] M. Choi, Z. Wu, E. Iglesia, J. Am. Chem. Soc., 2010, 132, 9129-9137.
8. [8] M. Moliner, J. E. Gabay, C. E. Kliewer, R. T. Carr, J. Guzman, G. L. Casty, P. Serna, A. Corma, J. Am. Chem. Soc., 2016, 138, 15743-15750.
9. [9] N. Kosinov, C. Auffret, C. Gucuyener, B. M. Szyja, J. Gascon, F. Kapteijn, E. J. M. Hensen, J. Mater. Chem. A, 2014, 2, 13083-13092.
10. [10] C. S. Cundy, P. A. Cox, Chem. Rev., 2003, 103, 663-702.
11. [11] A. Corma, Chem. Rev., 1997, 97, 2373-2420.
12. [12] Y. Jiao, C. Jiang, Z. Yang, J. Zhang, Microporous Mesoporous Mater., 2012, 162, 152-158.
13. [13] S. Ivanova, C. Lebrun, E. Vanhaecke, C. Pham-Huu, B. Louis, J. Catal., 2009, 265, 1-7.
14. [14] G. B. F. Seijger, O. L. Oudshoorn, W. E. J. van Kooten, J. C. Jansen, H. van Bekkum, C. M. van Den Bleek, H. P. A. Calis, Microporous Mesoporous Mater., 2000, 39, 195-204.
15. [15] J. Yao, C. Zeng, L. Zhang, N. Xu, Mater. Chem. Phys., 2008, 112, 637-640.
16. [16] I. Perdana, D. Creaser, I. Made Bendiyasa, Rochmadi, B. W. Tyoso, Chem. Eng. Sci., 2007, 62, 3882-3893.
17. [17] H. Kalipcilar, T. C. Bowen, R. D. Noble, J. L. Falconer, Chem. Mater., 2002, 14, 3458-3464.
18. [18] Y. Jiao, X. Yang, C. Jiang, C. Tian, Z. Yang, J. Zhang, J. Catal., 2015, 332, 70-76.
19. [19] M. Lacroix, P. Nguyen, D. Schweich, C. P. Huu, S. Savin-Poncet, D. Edouard, Chem. Eng. Sci., 2007, 62, 3259-3267.
20. [20] Y. Cui, X. Guo, Y. Wang, X. Guo, Chin. J. Catal., 2015, 36, 322-327.
21. [21] J. G. Fourie, J. P. D. Plessis, Chem. Eng. Sci., 2002, 57, 2781-2789.
22. [22] P. Losch, M. Boltz, K. Soukup, I. H. Song, H. S. Yun, B. Louis, Microporous Mesoporous Mater., 2014, 188, 99-107.
23. [23] X. Ou, S. Xu, J. M. Warnett, S. M. Holmes, A. Zaheer, A. A. Garforth, M. A. Williams, Y. Jiao, X. Fan, Chem. Eng. J., 2017, 312, 1-9.
24. [24] Y. Jiao, S. Xu, C. Jiang, M. Perdjon, X. Fan, J. Zhang, Appl. Catal. A, 2018, 559, 1-9.
25. [25] Z. Liao, T. Xu, Y. Jiang, B. Jiang, J. Wang, Y. Yang, Y. Jiao, Z. Yang, J. Zhang, Ind. Eng. Chem. Res., 2018, 58, 27-33.
26. [26] A. Zampieri, S. Kullmann, T. Selvam, J. Bauer, W. Schwieger, H. Sieber, T. Fey, P. Greil, Microporous Mesoporous Mater., 2006, 90, 162-174.
27. [27] S. Ivanova, B. Louis, M. J. Ledoux, C. Pham-Huu, J. Am. Chem. Soc., 2007, 129, 3383-3391.
28. [28] Y. Liu, S. Podila, D. L. Nguyen, D. Edouard, P. Nguyen, C. Pham, M. J. Ledoux, C. Pham-Huu, Appl. Catal. A, 2011, 409, 113-121.
29. [29] Y. Jiao, C. Jiang, Z. Yang, J. Liu, J. Zhang, Microporous Mesoporous Mater., 2013, 181, 201-207.
30. [30] S. Ivanova, B. Louis, B. Madani, J. P. Tessonnier, M. J. Ledoux, C. Pham-Huu, J. Phys. Chem. C, 2007, 111, 4368-4374.
31. [31] Q. Wei, G. Yang, Y. Yoneyama, T. Vitidsant, N. Tsubaki, Catal. Today, 2016, 265, 36-44.
32. [32] L. Gu, D. Ma, G. Hu, J. Wu, H. Wang, C. Sun, S. Yao, W. Shen, X. Bao, Dalton Trans., 2010, 39, 9705-9710.
33. [33] Q. Wei, G. Yang, X. Gao, N. Yamane, P. Zhang, G. Liu, N. Tsubaki, Chem. Eng. J., 2017, 327, 465-473.
34. [34] L. Gu, D. Ma, S. Yao, X. Liu, X. Han, W. Shen, X. Bao, Chem. Eur. J., 2009, 15, 13449-13455.
35. [35] S. Ivanova, E. Vanhaecke, B. Louis, S. Libs, M. J. Ledoux, S. Rigolet, C. Marichal, C. Pham, F. Luck, C. Pham-Huu, ChemSusChem, 2008, 1, 851-857.
36. [36] Y. Liu, S. Podila, D.L. Nguyen, D. Edouard, P. Nguyen, C. Pham, M. J. Ledoux, C. Pham-Huu, Appl. Catal. A, 2011, 409, 113-121.
37. [37] B. Louis, P. Reuse, L. Kiwi-Minsker, A. Renken, Appl. Catal. A, 2001, 210, 103-109.
38. [38] C. L. Kong, J. M. Lu, J. H. Yang, J. Q. Wang, J. Membr. Sci., 2006, 285, 258-264.
39. [39] Y. Y. Wang, G. Q. Jin, X. Y. Guo, Microporous Mesoporous Mater., 2009, 118, 302-306.
40. [40] C. D. Madhusoodana, R. N. Das, Y. Kameshima, A. Yasumori, K. Okada, Microporous Mesoporous Mater., 2001, 46, 249-255.
41. [41] M. M. Elamin, O. Muraza, Z. Malaibari, H. Ba, J. M. Nhut, C. Pham-Huu, Chem. Eng. J., 2015, 274, 113-122.
42. [42] H. Chen, X. Shi, J. Liu, K. Jie, Z. Zhang, X. Hu, Y. Zhu, X. Lu, J. Fu, H. Huang, S. Dai, J. Mater. Chem. A, 2018, 6, 21178-21185.
43. [43] P. Bai, P. Wu, W. Xing, D. Liu, L. Zhao, Y. Wang, B. Xu, Z. Yan, X. S. Zhao, J. Mater. Chem. A, 2015, 3, 18586-18597.
44. [44] H. Liu, S. Li, S. Zhang, L. Chen, G. Zhou, J. Wang, X. Wang, Catal. Lett., 2007, 120, 111-115.

扫一扫看文章

计量

PDF下载量: 10
文章访问数: 943
HTML全文浏览量: 76

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

无溶剂法合成ZSM-5/SiC整体式催化剂制备生物燃料

English

Solvent-free crystallization of ZSM-5 zeolite on SiC foam as a monolith catalyst for biofuel upgrading

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

无溶剂法合成ZSM-5/SiC整体式催化剂制备生物燃料

English

Solvent-free crystallization of ZSM-5 zeolite on SiC foam as a monolith catalyst for biofuel upgrading

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs