注册 English

Magnetic and Heat Resistant Poly(imide-ether) Nanocomposites Derived from Methyl Rich 9H-xanthene: Synthesis and Characterization

Khalil Faghihi ,  Hassan Moghanian ,  Fatemeh Mozafari ,  Meisam Shabanian

downloadPDF
Citation:  Khalil Faghihi, Hassan Moghanian, Fatemeh Mozafari, Meisam Shabanian. Magnetic and Heat Resistant Poly(imide-ether) Nanocomposites Derived from Methyl Rich 9H-xanthene: Synthesis and Characterization[J]. Chinese Journal of Polymer Science, 2018, 36(7): 822-834. doi: 10.1007/s10118-018-2094-y shu

Magnetic and Heat Resistant Poly(imide-ether) Nanocomposites Derived from Methyl Rich 9H-xanthene: Synthesis and Characterization

English


    1. [1]

      Zou, H.; Wu, S.; Shen, J., Polymer/silica nanocomposites: preparation, characterization, properties, and applications. Chem. Rev. 2008, 108(9), 3893-3957. doi: 10.1021/cr068035q

    2. [2]

      Wen, J.; Wilkes, G. L., Organic/inorganic hybrid network materials by the sol-gel approach. Chem. Mater. 1996, 8(8), 1667-1681. doi: 10.1021/cm9601143

    3. [3]

      Katiyar, V.; Gerds, N.; Koch, C. B.; Risbo, J.; Hansen, H. C. B.; Plackett, D., Poly l-lactide-layered double hydroxide nanocomposites via in situ polymerization of l-lactide. Polym. Degrad. Stab. 2010, 95(12), 2563-2573. doi: 10.1016/j.polymdegradstab.2010.07.031

    4. [4]

      Zhang, D.; Karki, A. B.; Rutman, D.; Young, D. P.; Wang, A.; Cocke, D.; Ho, T. H.; Guo, Z., Electrospun polyacrylonitrile nanocomposite fibers reinforced with Fe3O4 nanoparticles: fabrication and property analysis. Polymer 2009, 50(17), 4189-4198. doi: 10.1016/j.polymer.2009.06.062

    5. [5]

      Ramanathan, T.; Liu, H.; Brinson, L., Functionalized SWNT/polymer nanocomposites for dramatic property improvement. J. Polym. Sci. Pol. Phys. 2005, 43(17), 2269-2279. doi: 10.1002/(ISSN)1099-0488

    6. [6]

      Shabanian, M.; Ardeshir, H.; Haji-Ali, S.; Moghanian, H.; Hajibeygi, M.; Faghihi, K.; Khonakdar, H. A.; Salimi, H., Efficient poly(methyl-ether-imide)/LDH nanocomposite derived from a methyl rich bisphenol: From synthesis to properties. Appl. Clay Sci. 2016, 123, 285-291. doi: 10.1016/j.clay.2016.01.001

    7. [7]

      Malmir, S.; Montero, B.; Rico, M.; Barral, L.; Bouza, R., Morphology, thermal and barrier properties of biodegradable films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) containing cellulose nanocrystals. Compos. Part A-Appl. S. 2017, 93, 41-48. doi: 10.1016/j.compositesa.2016.11.011

    8. [8]

      Mao, L.; Liu, Y.; Wu, H.; Chen, J.; Yao, J., Poly(ε-caprolactone) filled with polydopamine-coated high aspect ratio layered double hydroxide: Simultaneous enhancement of mechanical and barrier properties. Appl. Clay Sci. 2017, 150, 202-209. doi: 10.1016/j.clay.2017.09.031

    9. [9]

      Lou, L.; Yu, K.; Zhang, Z.; Huang, R.; Wang, Y.; Zhu, Z., Facile methods for synthesis of core-shell structured and heterostructured Fe3O4@Au nanocomposites. Appl. Surf. Sci. 2012, 258(22), 8521-8526. doi: 10.1016/j.apsusc.2012.05.031

    10. [10]

      Zheng, H.; Yang, Y.; Wen, F.-S.; Yi, H.-B.; Zhou, D.; Li, F.-S., Microwave magnetic permeability of Fe3O4 nanoparticles. Chinese Phys. Lett. 2009, 26(1), 017501. doi: 10.1088/0256-307X/26/1/017501

    11. [11]

      Petri-Fink, A.; Chastellain, M.; Juillerat-Jeanneret, L.; Ferrari, A.; Hofmann, H., Development of functionalized superparamagnetic iron oxide nanoparticles for interaction with human cancer cells. Biomaterials 2005, 26(15), 2685-2694. doi: 10.1016/j.biomaterials.2004.07.023

    12. [12]

      Tan, S. T.; Wendorff, J. H.; Pietzonka, C.; Jia, Z. H.; Wang, G. Q., Biocompatible and biodegradable polymer nanofibers displaying superparamagnetic properties. ChemPhysChem 2005, 6(8), 1461-1465. doi: 10.1002/(ISSN)1439-7641

    13. [13]

      Hong, R.; Zhang, S.; Han, Y.; Li, H.; Ding, J.; Zheng, Y., Preparation, characterization and application of bilayer surfactant-stabilized ferrofluids. Powder Technol. 2006, 170(1), 1-11. doi: 10.1016/j.powtec.2006.08.017

    14. [14]

      Vidal-Vidal, J.; Rivas, J.; López-Quintela, M., Synthesis of monodisperse maghemite nanoparticles by the microemulsion method. Colloid Surface A 2006, 288(1), 44-51.

    15. [15]

      Zhao, D. L.; Teng, P.; Xu, Y.; Xia, Q. S.; Tang, J. T., Magnetic and inductive heating properties of Fe3O4/polyethylene glycol composite nanoparticles with core-shell structure. J. Alloy. Compd. 2010, 502(2), 392-395. doi: 10.1016/j.jallcom.2010.04.177

    16. [16]

      Utech, S.; Scherer, C.; Krohne, K.; Carrella, L.; Rentschler, E.; Gasi, T.; Ksenofontov, V.; Felser, C.; Maskos, M., Magnetic polyorganosiloxane core-shell nanoparticles: Synthesis, characterization and magnetic fractionation. J. Magn. Magn. Mater. 2010, 322(21), 3519-3526. doi: 10.1016/j.jmmm.2010.06.056

    17. [17]

      Lu, Y.; Yin, Y.; Mayers, B. T.; Xia, Y., Modifying the surface properties of superparamagnetic iron oxide nanoparticles through a sol-gel approach. Nano Lett. 2002, 2(3), 183-186. doi: 10.1021/nl015681q

    18. [18]

      Tena, A.; Fernández, L.; Sánchez, M.; Palacio, L.; Lozano, A.; Hernández, A.; Prádanos, P., Mixed matrix membranes of 6FDA-6FpDA with surface functionalized γ-alumina particles. an analysis of the improvement of permselectivity for several gas pairs. Chem. Eng. Sci. 2010, 65(6), 2227-2235. doi: 10.1016/j.ces.2009.12.023

    19. [19]

      Koohmareh, G. A., Synthesis and characterization of new disperse-red functionalized polyimide for use as nonlinear optical material. Des. Monomers Polym. 2012, 15(3), 275-288. doi: 10.1163/156855511X615678

    20. [20]

      Imai, Y.; Itoya, K.; Kanamaru, M.; Kakimoto, M. A., Synthesis and properties of new hydroxyl-pendant aromatic polyimides derived from trimethylsilylated 4, 4′-diamino-3, 3′-dihydroxybiphenyl and aromatic tetracarboxylic dianhydrides. J. Polym. Sci. Pol. Chem. 2002, 40(11), 1790-1795. doi: 10.1002/(ISSN)1099-0518

    21. [21]

      Yang, H. H., "Aromatic high-strength fibers", John Wiley & Sons, New York, 1989.

    22. [22]

      Faghihi, K.; Moghanian, H., Synthesis and characterization of new optically active poly(amide-imide) s containing 1, 3, 4-oxadiazole moiety in the main chain. Polym. Bull. 2010, 65(4), 319-332. doi: 10.1007/s00289-009-0203-3

    23. [23]

      Abadie, M. J.; Sillion, B., "Polyimides and other high-temperature polymers", Elsevier Science Ltd, Montpellier, France, 1991.

    24. [24]

      Akhter, T.; Saeed, S.; Siddiqi, H. M.; Ok Park, O., Preparation and characterization of novel polyimide-silica hybrids. Polym. Adv. Technol. 2013, 24(4), 407-414. doi: 10.1002/pat.v24.4

    25. [25]

      Kong, J. Y.; Choi, M. C.; Kim, G. Y.; Park, J. J.; Selvaraj, M.; Han, M.; Ha, C.-S., Preparation and properties of polyimide/graphene oxide nanocomposite films with Mg ion crosslinker. Eur. Polym. J. 2012, 48(8), 1394-1405. doi: 10.1016/j.eurpolymj.2012.05.015

    26. [26]

      Thiruvasagam, P., Synthesis and characterization of AB-type monomers and polyimides: a review. Des. Monomers Polym. 2013, 16(3), 197-221. doi: 10.1080/15685551.2013.771307

    27. [27]

      García, J. M.; García, F. C.; Serna, F.; José, L., High-performance aromatic polyamides. Prog. Polym. Sci. 2010, 35(5), 623-686. doi: 10.1016/j.progpolymsci.2009.09.002

    28. [28]

      Marchildon, K., Polyamides-still strong after seventy years. Macromol. React. Eng. 2011, 5(1), 22-54. doi: 10.1002/mren.v5.1

    29. [29]

      Mallakpour, S.; Kowsari, E., Synthesis and characterization of new optically active poly(amide-imide)s containing epiclon and L-methionine moieties in the main chain. Polym. Advan. Technol. 2005, 16(10), 732-737. doi: 10.1002/(ISSN)1099-1581

    30. [30]

      Zulfiqar, S.; Sarwar, M. I., Soluble aromatic polyamide bearing sulfone linkages: synthesis and characterization. High Perform. Polym. 2009, 21(1), 3-15. doi: 10.1177/0954008308089114

    31. [31]

      Liaw, D. J.; Liaw, B. Y., Synthesis and characterization of new polyamide-imides containing pendent adamantyl groups. Polymer 2001, 42(2), 839-845. doi: 10.1016/S0032-3861(00)00379-7

    32. [32]

      Liaw, D. J.; Hsu, P. N.; Liaw, B. Y., Synthesis and characterization of novel polyamide-imides containing noncoplanar 2, 2′-dimethyl-4, 4′-biphenylene unit. J. Polym. Sci. Pol. Chem. 2001, 39(1), 63-70. doi: 10.1002/(ISSN)1099-0518

    33. [33]

      Hsiao, S. H.; Yang, C. P.; Chen, C. W.; Liou, G. S., Synthesis and properties of novel poly(amide-imide) s containing pendent diphenylamino groups. Eur. Polym. J. 2005, 41(3), 511-517. doi: 10.1016/j.eurpolymj.2004.10.011

    34. [34]

      Sadavarte, N. V.; Avadhani, C.; Wadgaonkar, P. P., Synthesis and characterization of new organosoluble aromatic polyamides and polyazomethines containing pendent pentadecyl chains. High Perform. Polym. 2011, 23(7), 494-505. doi: 10.1177/0954008311417316

    35. [35]

      Espeso, J. F.; Lozano, Á. E.; de La Campa, J. G.; García-Yoldi, Í.; de Abajo, J., Synthesis and properties of new aromatic polyisophthalamides with adamantylamide pendent groups. J. Polym. Sci., A: Polym. Chem. 2010, 48(8), 1743-1751. doi: 10.1002/pola.v48:8

    36. [36]

      Tena, A.; Shishatskiy, S.; Meis, D.; Wind, J.; Filiz, V.; Abetz, V., Influence of the Composition and Imidization Route on the Chain Packing and Gas Separation Properties of Fluorinated Copolyimides. Macromolecules 2017, 50(15), 5839-5849. doi: 10.1021/acs.macromol.7b01051

    37. [37]

      Mehdipour-Ataei, S., Soluble, thermally stable poly(ester amide) s derived from terephthalic acid bis(carboxydiphenyl methyl) ester and different diamines. Eur. Polym. J. 2005, 41(1), 65-71. doi: 10.1016/j.eurpolymj.2004.08.013

    38. [38]

      Hsiao, S. H.; Lin, K. H., Polyimides derived from novel asymmetric ether diamine. J. Polym. Sci. Pol. Chem. 2005, 43(2), 331-341. doi: 10.1002/(ISSN)1099-0518

    39. [39]

      Faghihi, K.; Moghanian, H., Synthesis and characterization of optically active poly(amide-imide) s containing photosensitive chalcone units in the main chain. Chinese J. Polym. Sci. 2010, 28(5), 695-704. doi: 10.1007/s10118-010-9119-5

    40. [40]

      Shabanian, M.; Varvanifarahani, M.; Hajibeygi, M.; Khonakdar, H. A.; Ebrahimi, S.; Jafari, S. H., Effect of clay modifier on morphology, thermal properties and flammability of newly synthesized poly(sulfide-sulfone-amide). Appl. Clay Sci. 2015, 108, 70-77. doi: 10.1016/j.clay.2015.02.020

    41. [41]

      Khazaka, R.; Locatelli, M.; Diaham, S.; Bidan, P., Effects of mechanical stresses, thickness and atmosphere on aging of polyimide thin films at high temperature. Polym. Degrad. Stabil. 2013, 98(1), 361-367. doi: 10.1016/j.polymdegradstab.2012.09.005

    42. [42]

      Wang, C.; Chen, W.; Chen, Y.; Zhao, X.; Li, J.; Ren, Q., New fluorinated poly(ether sulfone imide) s with high thermal stability and low dielectric constant. Mater. Chem. Phys. 2014, 143(2), 773-778. doi: 10.1016/j.matchemphys.2013.10.012

    43. [43]

      Hsiao, S. H.; Yang, C. P.; Lin, W. L., Synthesis and characterization of new diphenylfluorene-based aromatic polyamides derived from 9, 9-bis[4-(4-carboxy-phenoxy) phenyl] fluorene. Macromol. Chem. Phys. 1999, 200(6), 1428-1433. doi: 10.1002/(ISSN)1521-3935

    44. [44]

      Yang, C. P.; Lin, J. H., Preparation and properties of aromatic polyamides and polyimides derived from 3, 3-bis[4-(4-aminophenoxy) phenyl] phthalide. J. Polym. Sci. Pol. Chem. 1994, 32(3), 423-433. doi: 10.1002/pola.1994.080320303

    45. [45]

      Yang, C. P.; Lin, J. H., Syntheses and properties of aromatic polyamides and polyimides based on 3, 3-bis[4-(4-aminophenoxy) phenyl]-phthalimidine. Polymer 1995, 36(13), 2607-2614. doi: 10.1016/0032-3861(95)91208-O

    46. [46]

      Liaw, D. J.; Liaw, B. Y.; Chung, C. Y., Synthesis and characterization of new adamantane-type cardo polyamides. Acta Polym. Sin. (in Chinese) 1999, 50(4), 135-140.

    47. [47]

      Liaw, D. J.; Liaw, B. Y., Synthesis and characterization of norbornane-containing cardo polyamides. J. Polym. Sci. Pol. Chem. 1999, 37(15), 2791-2794. doi: 10.1002/(ISSN)1099-0518

    48. [48]

      Hatakeyama, S.; Ochi, N.; Numata, H.; Takano, S., A new route to substituted 3-methoxycarbonyldihydropyrans; enantioselective synthesis of (-)-methyl elenolate. J. Chem. Soc. Chem. Commun. 1988, (17), 1202-1204. doi: 10.1039/C39880001202

    49. [49]

      Banerjee, A.; Mukherjee, A., Chemical aspects of santalin as a histological stain. Stain Technol. 1981, 56(2), 83-85. doi: 10.3109/10520298109067286

    50. [50]

      Hunter, R. C.; Beveridge, T. J., Application of a pH-sensitive fluoroprobe (C-SNARF-4) for pH microenvironment analysis in Pseudomonas aeruginosa biofilms. Appl. Environ. Microb. 2005, 71(5), 2501-2510. doi: 10.1128/AEM.71.5.2501-2510.2005

    51. [51]

      Ahmad, M.; King, T. A.; Ko, D.-K.; Cha, B. H.; Lee, J., Performance and photostability of xanthene and pyrromethene laser dyes in sol-gel phases. J. Phys. D Appl. Phys. 2002, 35(13), 1473-1476. doi: 10.1088/0022-3727/35/13/303

    52. [52]

      Katritzky, A. R.; Czerney, P.; Levell, J. R., Benzotriazole-mediated conversions of para-H-substituted pyrylium, benzo [b] pyrylium, and xanthylium salts into para-position functionalized derivatives (an indirect electrophilic substitution of electron-deficient heteroaromatics). J. Org. Chem. 1997, 62(23), 8198-8200. doi: 10.1021/jo971174a

    53. [53]

      Li, T.; Sheng, S. R.; Wei, M. H.; Chen, C.; Song, C. S., A new fluorinated poly(ether amide) bearing xanthene group. Chinese Chem. Lett. 2010, 21(10), 1247-1250. doi: 10.1016/j.cclet.2010.04.017

    54. [54]

      Hajibeygi, M.; Shabanian, M.; Moghanian, H.; Khonakdar, H.; Häußler, L., Development of one-step synthesized LDH reinforced multifunctional poly(amide-imide) matrix containing xanthene rings: study on thermal stability and flame retardancy. RSC Adv. 2015, 5(66), 53726-53735. doi: 10.1039/C5RA05565B

    55. [55]

      Morisaki, Y.; Murakami, T.; Sawamura, T.; Chujo, Y.,[2.2] Paracyclophane-layered polymers end-capped with fluorescence quenchers. Macromolecules 2009, 42(10), 3656-3660. doi: 10.1021/ma9000644

    56. [56]

      Morisaki, Y.; Murakami, T.; Chujo, Y., Synthesis and properties of [2.2] paracyclophane-layered polymers. Macromolecules 2008, 41(16), 5960-5963. doi: 10.1021/ma801358n

    57. [57]

      Stöber, W.; Fink, A.; Bohn, E., Controlled growth of monodisperse silica spheres in the micron size range. J. Colloid. Interf. Sci. 1968, 26(1), 62-69. doi: 10.1016/0021-9797(68)90272-5

    58. [58]

      Mobinikhaledi, A.; Moghanian, H.; Deinavizadeh, M., pTSA-catalyzed condensation of xylenols and aldehydes under solvent-free conditions: one-pot synthesis of 9H-xanthene or bisphenol derivatives. C. R. Chimie 2013, 16, 1035-1041. doi: 10.1016/j.crci.2013.03.008

    59. [59]

      Schwab, M. G.; Fassbender, B.; Spiess, H. W.; Thomas, A.; Feng, X.; Mullen, K., Catalyst-free preparation of melamine-based microporous polymer networks through Schiff base chemistry. J. Am. Chem. Soc. 2009, 131(21), 7216-7217. doi: 10.1021/ja902116f

    60. [60]

      Giri, J.; Thakurta, S. G.; Bellare, J.; Nigam, A. K.; Bahadur, D., Preparation and characterization of phospholipid stabilized uniform sized magnetite nanoparticles. J. Magn. Magn. Mater. 2005, 293(1), 62-68. doi: 10.1016/j.jmmm.2005.01.044

    61. [61]

      Wan, M., The influence of polymerization method and temperature on the absorption spectra and morphology of polyaniline. Synthetic Met. 1989, 31(1), 51-59. doi: 10.1016/0379-6779(89)90626-7

    62. [62]

      Moghanian, H.; Mobinikhaledi, A.; Baharangiz, Z., Synthesis, characterization and magnetic properties of novel heat resistant polyimide nanocomposites derived from 14H-dibenzo [a, j] xanthene. J. Polym. Res. 2014, 21, 513. doi: 10.1007/s10965-014-0513-5

    63. [63]

      Yang, C.; Chen, C., Synthesis, characterisation and properties of polyanilines containing transition metal ions. Synthetic Met. 2005, 153(1-3), 133-136. doi: 10.1016/j.synthmet.2005.07.136

    64. [64]

      Jiang, J.; Li, L.; Zhu, M., Polyaniline/magnetic ferrite nanocomposites obtained by in situ polymerization. React. Funct. Polym. 2008, 68(1), 57-62. doi: 10.1016/j.reactfunctpolym.2007.10.010

    65. [65]

      Farghali, A.; Moussa, M.; Khedr, M., Synthesis and characterization of novel conductive and magnetic nano-composites. J. Alloy. Compd. 2010, 499(1), 98-103. doi: 10.1016/j.jallcom.2010.03.124

    66. [66]

      Liu, D.; Wu, W.; Ling, J.; Wen, S.; Gu, N.; Zhang, X., Effective PEGylation of iron oxide nanoparticles for high performance cancer imaging. Adv. Funct. Mater. 2011, 21(8), 1498-1504. doi: 10.1002/adfm.v21.8

    67. [67]

      Lu, A. H.; Salabas, E. e. L.; Schüth, F., Magnetic nanoparticles: synthesis, protection, functionalization, and application. Angew. Chem. Int. Ed. 2007, 46(8), 1222-1244. doi: 10.1002/(ISSN)1521-3773

    68. [68]

      Wang, S.; Tan, Z.; Li, Y.; Sun, L.; Zhang, T., Synthesis, characterization and thermal analysis of polyaniline/ZrO2 composites. Thermochim Acta 2006, 441(2), 191-194. doi: 10.1016/j.tca.2005.05.020

  • 加载中
WeChat 扫一扫看文章
计量
  • PDF下载量:  0
  • 文章访问数:  1968
  • HTML全文浏览量:  65
文章相关
  • 发布日期:  2018-07-01
  • 收稿日期:  2017-08-25
  • 接受日期:  2017-11-20
  • 网络出版日期:  2018-07-02
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章

All Rights Reserved by the Chinese Chemical Society   中国化学会 版权所有 京ICP备05002797号

本系统由北京仁和汇智信息技术有限公司开发    技术支持: info@rhhz.net