Citation: NIE Xiang, GUO Xiao-Dong, ZHONG Ben-He, LIU Heng, FANG Wei-Mao. Effect of Mn Source on 5 V LiNi_0.5Mn_1.5O₄ Positive Electrode Materials Prepared by Combustion Method[J]. Chinese Journal of Inorganic Chemistry, ;2012, 28(12): 2573-2580. shu

Effect of Mn Source on 5 V LiNi_0.5Mn_1.5O₄ Positive Electrode Materials Prepared by Combustion Method

1.
1. College of Chemical Engineering, Sichuan University, Chengdu 610065, China;

Corresponding author: GUO Xiao-Dong,
Received Date: 22 March 2012
Available Online: 13 June 2012
Fund Project: 国家科技支撑计划(No.2007BAQ01055) (No.2007BAQ01055)国家自然科学基金(No.50574063)以及四川大学青年基金(No.2011SCU11081)资助项目. (No.50574063)以及四川大学青年基金(No.2011SCU11081)

Sub-micrometric LiNi_0.5Mn_1.5O₄ cathode materials were prepared by sucrose combustion method with two different Mn sources. The effect of manganese acetate and manganese nitrate on the crystal structure, morphology, particle size and electrical performance of the prepared samples was evaluated by X-ray diffraction (XRD),scanning electron microscopy (SEM), particle size analysis, cyclic voltammetry (CV),galvanostatic charge-discharge test and electrochemical impedance spectroscopy (EIS). XRD analysis shows that the structure of both samples is a typical cubic spinel with Fd3m space group. The particle size and the distribution of the LiNi_0.5Mn_1.5O₄ powder are strongly influenced by Mn source. The materials prepared by manganese acetate have smaller particle size and narrower particle size distribution, which can facilitate Li ions extraction and insertion. Furthermore, the sample LiNi_0.5Mn_1.5O₄ prepared by manganese acetate has better electrochemical performances. An initial specific capacity of 144.5 mAh·g^-1 at 1C in the voltage range of 3.6~5.2 V, 96% of the initial capacity after 100 cycles is maintained, and capacities of 136.3, 132.0, 124.7 and 96.6 mAh·g^-1 are achieved at the rate of 3C, 5C, 10C and 20C, respectively.
- high voltage cathode materials;sucrose combustion method;LiNi_0.5Mn_1.5O₄;Mn source
References
1. [1]
  [1] Guo X D, Zhong B H, Liu H, et al. J. Electrochem. Soc., 2009,156:A787-A790
2. [2]
  [2] TANG Yan(唐艳), ZHONG Ben-He(钟本和), GUO Xiao-Dong(郭孝东), et al. Acta Phys.-Chim. Sin.(Wuli Huaxue Xuebao), 2011,27(4):869-874
3. [3]
  [3] Wolfgang M, Jean-Francios C, Dietrich G, et al. Electrochimica Acta, 2010,55:4964-4969
4. [4]
  [4] Liu G Q, Wen L, Liu Y M. J. Solid State Electrochem., 2010,14:2191-2202
5. [5]
  [5] Chi L H, Dinh N N, Brutti S, et al. Electrochimica Acta., 2010,55:5110-5116
6. [6]
  [6] Yi T F, Zhu Y R, Zhu R S. Solid State Ionics., 2008,179: 2132-2136
7. [7]
  [7] Mohamed A, Jose M A, Rosa M, et al. J. Power Sources, 2008,185:501-511
8. [8]
  [8] CHEN Zhao-Yong(陈召勇), XIAO Jing(肖劲), ZHU Hua-Li (朱华丽), et al. Chinese J. Inorg. Chem.(Wuji Huaxue Xuebao), 2005,21(9):1417-1421
9. [9]
  [9] Yang T Y, Sun K, Lei Z Y, et al. J. Alloys Compd., 2010, 502:215-219
10. [10]
  [10] Liu H Y, Wu Y P, Rahm E, et al. J. Solid State Electrochem., 2004,8:450-466
11. [11]
  [11] Chang Z R, Dai D M, Tang H W, et al. Electrochimica Acta, 2010,55:5506-5510
12. [12]
  [12] DAI Ke-Hua(代克化), MAO Jing(毛景), ZHAI Yu-Chun (翟玉春). Acta Phys.-Chim. Sin.(Wuli Huaxue Xuebao), 2010,26(8):2130-2134
13. [13]
  [13] HE Ze-Qiang(何则强), XIONG Li-Zhi(熊利芝), WU Xian-Ming(吴显明), et al. Chinese J. Inorg. Chem.(Wuji Huaxue Xuebao), 2007,23(5): 875-878
14. [14]
  [14] Yang T Y, Sun K N, Lei Z Y, et al. J. Solid State Electrochem., 2011,15:391-397
15. [15]
  [15] Feng X Y, Shen C, Fang X, et al. J. Alloys Compd.,2011, 509:3623-3626
16. [16]
  [16] PANG Pei-Pei(庞佩佩), TANG Zhi-Yuan(唐致远), YUAN Xiu-Lan(袁秀兰). J. Chinese Battery Industry.(Dianchi Gongye),2010,15(3):160-164
17. [17]
  [17] Fang X, Ding N, Feng X Y, et al. Electrocheimica Acta, 2009,54:7471-7475
18. [18]
  [18] Yi T F, Shu J, Zhu Y R, et al. J. Phys. Chem. Solids, 2009,70:153-158
1. [1]
  [1] Guo X D, Zhong B H, Liu H, et al. J. Electrochem. Soc., 2009,156:A787-A790
2. [2]
  [2] TANG Yan(唐艳), ZHONG Ben-He(钟本和), GUO Xiao-Dong(郭孝东), et al. Acta Phys.-Chim. Sin.(Wuli Huaxue Xuebao), 2011,27(4):869-874
3. [3]
  [3] Wolfgang M, Jean-Francios C, Dietrich G, et al. Electrochimica Acta, 2010,55:4964-4969
4. [4]
  [4] Liu G Q, Wen L, Liu Y M. J. Solid State Electrochem., 2010,14:2191-2202
5. [5]
  [5] Chi L H, Dinh N N, Brutti S, et al. Electrochimica Acta., 2010,55:5110-5116
6. [6]
  [6] Yi T F, Zhu Y R, Zhu R S. Solid State Ionics., 2008,179: 2132-2136
7. [7]
  [7] Mohamed A, Jose M A, Rosa M, et al. J. Power Sources, 2008,185:501-511
8. [8]
  [8] CHEN Zhao-Yong(陈召勇), XIAO Jing(肖劲), ZHU Hua-Li (朱华丽), et al. Chinese J. Inorg. Chem.(Wuji Huaxue Xuebao), 2005,21(9):1417-1421
9. [9]
  [9] Yang T Y, Sun K, Lei Z Y, et al. J. Alloys Compd., 2010, 502:215-219
10. [10]
  [10] Liu H Y, Wu Y P, Rahm E, et al. J. Solid State Electrochem., 2004,8:450-466
11. [11]
  [11] Chang Z R, Dai D M, Tang H W, et al. Electrochimica Acta, 2010,55:5506-5510
12. [12]
  [12] DAI Ke-Hua(代克化), MAO Jing(毛景), ZHAI Yu-Chun (翟玉春). Acta Phys.-Chim. Sin.(Wuli Huaxue Xuebao), 2010,26(8):2130-2134
13. [13]
  [13] HE Ze-Qiang(何则强), XIONG Li-Zhi(熊利芝), WU Xian-Ming(吴显明), et al. Chinese J. Inorg. Chem.(Wuji Huaxue Xuebao), 2007,23(5): 875-878
14. [14]
  [14] Yang T Y, Sun K N, Lei Z Y, et al. J. Solid State Electrochem., 2011,15:391-397
15. [15]
  [15] Feng X Y, Shen C, Fang X, et al. J. Alloys Compd.,2011, 509:3623-3626
16. [16]
  [16] PANG Pei-Pei(庞佩佩), TANG Zhi-Yuan(唐致远), YUAN Xiu-Lan(袁秀兰). J. Chinese Battery Industry.(Dianchi Gongye),2010,15(3):160-164
17. [17]
  [17] Fang X, Ding N, Feng X Y, et al. Electrocheimica Acta, 2009,54:7471-7475
18. [18]
  [18] Yi T F, Shu J, Zhu Y R, et al. J. Phys. Chem. Solids, 2009,70:153-158
1. [1]
  Aoyu Huang , Jun Xu , Yu Huang , Gui Chu , Mao Wang , Lili Wang , Yongqi Sun , Zhen Jiang , Xiaobo Zhu . Tailoring Electrode-Electrolyte Interfaces via a Simple Slurry Additive for Stable High-Voltage Lithium-Ion Batteries. Acta Physico-Chimica Sinica, 2025, 41(4): 100037-. doi: 10.3866/PKU.WHXB202408007
2. [2]
  Jianbao Mei , Bei Li , Shu Zhang , Dongdong Xiao , Pu Hu , Geng Zhang . Enhanced Performance of Ternary NASICON-Type Na_3.5-xMn_0.5V_1.5-xZr_x(PO₄)₃/C Cathodes for Sodium-Ion Batteries. Acta Physico-Chimica Sinica, 2024, 40(12): 2407023-. doi: 10.3866/PKU.WHXB202407023
3. [3]
  Doudou Qin , Junyang Ding , Chu Liang , Qian Liu , Ligang Feng , Yang Luo , Guangzhi Hu , Jun Luo , Xijun Liu . Addressing Challenges and Enhancing Performance of Manganese-based Cathode Materials in Aqueous Zinc-Ion Batteries. Acta Physico-Chimica Sinica, 2024, 40(10): 2310034-. doi: 10.3866/PKU.WHXB202310034
4. [4]
  Qin ZHU , Jiao MA , Zhihui QIAN , Yuxu LUO , Yujiao GUO , Mingwu XIANG , Xiaofang LIU , Ping NING , Junming GUO . Morphological evolution and electrochemical properties of cathode material LiAl_0.08Mn_1.92O₄ single crystal particles. Chinese Journal of Inorganic Chemistry, 2024, 40(8): 1549-1562. doi: 10.11862/CJIC.20240022
5. [5]
  Ru SONG , Biao WANG , Chunling LU , Bingbing NIU , Dongchao QIU . Electrochemical properties of stable and highly active PrBa_0.5Sr_0.5Fe_1.6Ni_0.4O_5+δ cathode material. Chinese Journal of Inorganic Chemistry, 2025, 41(4): 639-649. doi: 10.11862/CJIC.20240397
6. [6]
  Xinpeng LIU , Liuyang ZHAO , Hongyi LI , Yatu CHEN , Aimin WU , Aikui LI , Hao HUANG . Ga₂O₃ coated modification and electrochemical performance of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode material. Chinese Journal of Inorganic Chemistry, 2024, 40(6): 1105-1113. doi: 10.11862/CJIC.20230488
7. [7]
  Hengyi ZHU , Liyun JU , Haoyue ZHANG , Jiaxin DU , Yutong XIE , Li SONG , Yachao JIN , Mingdao ZHANG . Efficient regeneration of waste LiNi_0.5Co_0.2Mn_0.3O₂ cathode toward high-performance Li-ion battery. Chinese Journal of Inorganic Chemistry, 2025, 41(4): 625-638. doi: 10.11862/CJIC.20240358
8. [8]
  Jiaxuan Zuo , Kun Zhang , Jing Wang , Xifei Li . 锂离子电池Ni-Co-Mn基正极材料前驱体的形核调控及机制. Acta Physico-Chimica Sinica, 2025, 41(1): 2404042-. doi: 10.3866/PKU.WHXB202404042
9. [9]
  Qingtang ZHANG , Xiaoyu WU , Zheng WANG , Xiaomei WANG . Performance of nano Li₂FeSiO₄/C cathode material co-doped by potassium and chlorine ions. Chinese Journal of Inorganic Chemistry, 2024, 40(9): 1689-1696. doi: 10.11862/CJIC.20240115
10. [10]
  Junke LIU , Kungui ZHENG , Wenjing SUN , Gaoyang BAI , Guodong BAI , Zuwei YIN , Yao ZHOU , Juntao LI . Preparation of modified high-nickel layered cathode with LiAlO₂/cyclopolyacrylonitrile dual-functional coating. Chinese Journal of Inorganic Chemistry, 2024, 40(8): 1461-1473. doi: 10.11862/CJIC.20240189
11. [11]
  Zhenming Xu , Mingbo Zheng , Zhenhui Liu , Duo Chen , Qingsheng Liu . Experimental Design of Project-Driven Teaching in Computational Materials Science: First-Principles Calculations of the LiFePO₄ Cathode Material for Lithium-Ion Batteries. University Chemistry, 2024, 39(4): 140-148. doi: 10.3866/PKU.DXHX202307022
12. [12]
  Tao Long , Peng Chen , Bin Feng , Caili Yang , Kairong Wang , Yulei Wang , Can Chen , Yaping Wang , Ruotong Li , Meng Wu , Minhuan Lan , Wei Kong Pang , Jian-Fang Wu , Yuan-Li Ding . Reinforced concrete-like Na_3.5V_1.5Mn_0.5(PO₄)₃@graphene hybrids with hierarchical porosity as durable and high-rate sodium-ion battery cathode. Chinese Chemical Letters, 2024, 35(4): 109267-. doi: 10.1016/j.cclet.2023.109267
13. [13]
  Mingjiao Lu , Zhixing Wang , Gui Luo , Huajun Guo , Xinhai Li , Guochun Yan , Qihou Li , Xianglin Li , Ding Wang , Jiexi Wang . Boosting the performance of LiNi_0.90Co_0.06Mn_0.04O₂ electrode by uniform Li₃PO₄ coating via atomic layer deposition. Chinese Chemical Letters, 2024, 35(5): 108638-. doi: 10.1016/j.cclet.2023.108638
14. [14]
  Xinlong WANG , Zhenguo CHENG , Guo WANG , Xiaokuen ZHANG , Yong XIANG , Xinquan WANG . Enhancement of the fragile interface of high voltage LiCoO₂ by surface gradient permeation of trace amounts of Mg/F. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 571-580. doi: 10.11862/CJIC.20230259
15. [15]
  Lei Shu , Zhengqing Hao , Kai Yan , Hong Wang , Lihua Zhu , Fang Chen , Nan Wang . Development of a Double-Carbon Related Experiment: Preparation, Characterization and Carbon-Capture Ability of Eggshell-Derived CaO. University Chemistry, 2024, 39(4): 149-156. doi: 10.3866/PKU.DXHX202310134
16. [16]
  Zhuo Wang , Xue Bai , Kexin Zhang , Hongzhi Wang , Jiabao Dong , Yuan Gao , Bin Zhao . MOF模板法合成氮掺杂碳材料用于增强电化学钠离子储存和去除. Acta Physico-Chimica Sinica, 2025, 41(3): 2405002-. doi: 10.3866/PKU.WHXB202405002
17. [17]
  Yuyao Wang , Zhitao Cao , Zeyu Du , Xinxin Cao , Shuquan Liang . Research Progress of Iron-based Polyanionic Cathode Materials for Sodium-Ion Batteries. Acta Physico-Chimica Sinica, 2025, 41(4): 100035-. doi: 10.3866/PKU.WHXB202406014
18. [18]
  Xiangyu CAO , Jiaying ZHANG , Yun FENG , Linkun SHEN , Xiuling ZHANG , Juanzhi YAN . Synthesis and electrochemical properties of bimetallic-doped porous carbon cathode material. Chinese Journal of Inorganic Chemistry, 2025, 41(3): 509-520. doi: 10.11862/CJIC.20240270
19. [19]
  Shipeng WANG , Shangyu XIE , Luxian LIANG , Xuehong WANG , Jie WEI , Deqiang WANG . Piezoelectric effect of Mn, Bi co-doped sodium niobate for promoting cell proliferation and bacteriostasis. Chinese Journal of Inorganic Chemistry, 2024, 40(10): 1919-1931. doi: 10.11862/CJIC.20240094
20. [20]
  Houzhen Xiao , Mingyu Wang , Yong Liu , Bangsheng Lao , Lingbin Lu , Minghuai Yu . Course Ideological and Political Design of Combustion Heat Measurement Experiment. University Chemistry, 2024, 39(2): 7-13. doi: 10.3866/PKU.DXHX202310011

Get Citation

PDF

XML

Metrics

PDF Downloads(0)
Abstract views(259)
HTML views(25)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Effect of Mn Source on 5 V LiNi0.5Mn1.5O4 Positive Electrode Materials Prepared by Combustion Method

References

Metrics

通讯作者: 陈斌, bchen63@163.com

Effect of Mn Source on 5 V LiNi_0.5Mn_1.5O₄ Positive Electrode Materials Prepared by Combustion Method