Citation: CHEN Mingfeng, LIU Yuhui, FAN Xianmou, YANG Songwei, LIN Jinhuo, LIU Canpei, HUANG Haibin. Preparation and Properties of Unsaturated Polyester Resin Sheet Molding Compound[J]. Chinese Journal of Applied Chemistry, ;2018, 35(10): 1222-1226. doi: 10.11944/j.issn.1000-0518.2018.10.170355 shu

Preparation and Properties of Unsaturated Polyester Resin Sheet Molding Compound

CHEN Mingfeng ^a,b,, ,
LIU Yuhui ^a,b ,
FAN Xianmou ^a,b ,
YANG Songwei ^a ,
LIN Jinhuo ^a,b ,
LIU Canpei ^a,b ,
HUANG Haibin ^a

a.
Quangang Petrochemical Research Institute of Fujian Normal University, Quanzhou, Fujian 362801, China
b.
Fujian Key Laboratory of Polymer Materials, College of Chemistry and Materials Science, Fujian Normal University, Fuzhou 350007, China

Corresponding author: CHEN Mingfeng, cmfjnu@fjnu.edu.cn
Received Date: 27 September 2017
Revised Date: 13 November 2017
Accepted Date: 5 January 2018

Fund Project: Supported by JK Project of Education Department of Fujian Province(No.JK2017010); the Key Research and Development Platform of Polyresin Functionalization Technology of Fujian Province(No.2014H2003)the Key Research and Development Platform of Polyresin Functionalization Technology of Fujian Province 2014H2003JK Project of Education Department of Fujian Province JK2017010

Figures(5)

The unsaturated polyester resin sheet molding compound(UP-SMC) products were prepared by compression molding. The mechanical properties, thermal stability and flame retardant performance of UP-SMC products were characterized by the universal testing machine, thermogravimetric analysis, dynamic mechanical analysis, limiting oxygen index and nanoindentation technology. The results show that the bending strength and impact strength of UP-SMC products are up to 203.4 and 94.2 MPa, respectively, and the micromechanical properties are different from resin to fiber phases. The glass transition temperature is 169.4℃, the temperature at 5% mass loss(T_d5) and maximum mass loss rate(T_dmax) are 333.5 and 389.7℃, respectively. The residue at 600℃ is up to 75%, but the limiting oxygen index is only 25.7%, indicting that the prepared UP-SMC products have excellent mechanical and thermal stability properties.
- sheet molding compound,
- compression molding,
- mechanical properties,
- thermal stability
1. [1]
  Cabrera-Ríos M, Castro J M. An Economical Way of Using Carbon Fibers in Sheet Molding Compound Compression Molding for Automotive Applications[J]. Polym Compos, 2010,27(6):718-722.
2. [2]
  LIU Hui, CHEN Xin, HE Zhouwen. Preparation of a New Polyurethane Resin Available for Cable Support Based on Composite Materials[J]. Chem Reagents, 2016,38(8):808-812.
3. [3]
  FU Heng, CHEN Yuting. Situation and Development of SMC[J]. Fiber Compos, 2005,22(3):58-60. doi: 10.3969/j.issn.1003-6423.2005.03.017
4. [4]
  Asadi A, Baaij F, Mainka H. Basalt Fibers as a Sustainable and Cost-effective Alternative to Glass Fibers in Sheet Molding Compound(SMC)[J]. Compos Part B-Eng, 2017,123:210-218. doi: 10.1016/j.compositesb.2017.05.017
5. [5]
  Lu J, Khot S, Wool R P. New Sheet Molding Compound Resins from Soybean Oil.Ⅰ.Synthesis and Characterization[J]. Polymer, 2005,46(1):71-80. doi: 10.1016/j.polymer.2004.10.060
6. [6]
  LI Xiaomin, ZHU Zhenghou, ZHENG Xialian. Study on the SMC Molding Technology and Absorbing Properties of New-type Absorbing Composite[J]. J Funct Mater, 2013,3(44):337-344.
7. [7]
  Chaturvedi S K, Sun C T, Sierakowski R L. Mechanical Characterization of Sheet Molding Compound Composites[J]. Polym Compos, 2010,4(3):167-171.
8. [8]
  SUN Wei, ZHAI Guofang, FENG Wei. Effect of Filler Packing Density on the Processing and Product Properties of SMC[J]. Polym Mater Sci Eng, 2009,25(4):51-54. doi: 10.3321/j.issn:1000-7555.2009.04.014
9. [9]
  Oliver W C, Pharr G M. Measurement of Hardness and Elastic Modulus by Instrumented Indentation:Advances in Understanding and Refinements to Methodology[J]. J Mater Res, 2004,19(1):3-20. doi: 10.1557/jmr.2004.19.1.3
10. [10]
  Fu K, Yin Y, Chang L. Analysis on Multiple Ring-like Cracks in Thin Amorphous Carbon Film on Soft Substrate Under Nanoindentation[J]. J Phys D Appl Phys, 2013,46(50):505314-505323. doi: 10.1088/0022-3727/46/50/505314
11. [11]
  GAO Xueyu, YANG Qingsheng, LIU Zhiyuan. In Situ Characterization of Carbon Fiber/Epoxy Composites by Nanoindentation[J]. Acta Mater Compos Sin, 2012,29(5):209-214.
12. [12]
  Senthil T, Weng Z X, Wu L X. Interlaminar Microstructure and Mechanical Response of 3D Robust Glass Fabric-Polyester Composites Modified with Carbon Nanofibers[J]. Carbon, 2017,112:17-26. doi: 10.1016/j.carbon.2016.10.087
1. [1]
  Feng Zheng , Ruxun Yuan , Xiaogang Wang . “Research-Oriented” Comprehensive Experimental Design in Polymer Chemistry: the Case of Polyimide Aerogels. University Chemistry, 2024, 39(10): 210-218. doi: 10.12461/PKU.DXHX202404027
2. [2]
  Xuewei BA , Cheng CHENG , Huaikang ZHANG , Deqing ZHANG , Shuhua LI . Preparation and luminescent performance of Sr_1-xZrSi₂O₇∶xDy³⁺ phosphor with high thermal stability. Chinese Journal of Inorganic Chemistry, 2025, 41(2): 357-364. doi: 10.11862/CJIC.20240096
3. [3]
  Ziliang KANG , Jiamin ZHANG , Hong AN , Xiaohua LIU , Yang CHEN , Jinping LI , Libo LI . Preparation and water adsorption properties of CaCl₂@MOF-808 in-situ composite moulded particles. Chinese Journal of Inorganic Chemistry, 2024, 40(11): 2133-2140. doi: 10.11862/CJIC.20240282
4. [4]
  Shitao Fu , Jianming Zhang , Cancan Cao , Zhihui Wang , Chaoran Qin , Jian Zhang , Hui Xiong . Study on the Stability of Purple Cabbage Pigment. University Chemistry, 2024, 39(4): 367-372. doi: 10.3866/PKU.DXHX202401059
5. [5]
  Xuyang Wang , Jiapei Zhang , Lirui Zhao , Xiaowen Xu , Guizheng Zou , Bin Zhang . Theoretical Study on the Structure and Stability of Copper-Ammonia Coordination Ions. University Chemistry, 2024, 39(3): 384-389. doi: 10.3866/PKU.DXHX202309065
6. [6]
  Xiaoning TANG , Junnan LIU , Xingfu YANG , Jie LEI , Qiuyang LUO , Shu XIA , An XUE . Effect of sodium alginate-sodium carboxymethylcellulose gel layer on the stability of Zn anodes. Chinese Journal of Inorganic Chemistry, 2024, 40(8): 1452-1460. doi: 10.11862/CJIC.20240191
7. [7]
  Jiaxi Xu , Yuan Ma . Influence of Hyperconjugation on the Stability and Stable Conformation of Ethane, Hydrazine, and Hydrogen Peroxide. University Chemistry, 2024, 39(11): 374-377. doi: 10.3866/PKU.DXHX202402049
8. [8]
  Jing SU , Bingrong LI , Yiyan BAI , Wenjuan JI , Haiying YANG , Zhefeng Fan . Highly sensitive electrochemical dopamine sensor based on a highly stable In-based metal-organic framework with amino-enriched pores. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1337-1346. doi: 10.11862/CJIC.20230414
9. [9]
  Renqing Lü , Shutao Wang , Fang Wang , Guoping Shen . Computational Chemistry Aided Organic Chemistry Teaching: A Case of Comparison of Basicity and Stability of Diazine Isomers. University Chemistry, 2025, 40(3): 76-82. doi: 10.12461/PKU.DXHX202404119
10. [10]
  Baitong Wei , Jinxin Guo , Xigong Liu , Rongxiu Zhu , Lei Liu . Theoretical Study on the Structure, Stability of Hydrocarbon Free Radicals and Selectivity of Alkane Chlorination Reaction. University Chemistry, 2025, 40(3): 402-407. doi: 10.12461/PKU.DXHX202406003
11. [11]
  Jingke LIU , Jia CHEN , Yingchao HAN . Nano hydroxyapatite stable suspension system: Preparation and cobalt adsorption performance. Chinese Journal of Inorganic Chemistry, 2024, 40(9): 1763-1774. doi: 10.11862/CJIC.20240060
12. [12]
  Ru SONG , Biao WANG , Chunling LU , Bingbing NIU , Dongchao QIU . Electrochemical properties of stable and highly active PrBa_0.5Sr_0.5Fe_1.6Ni_0.4O_5+δ cathode material. Chinese Journal of Inorganic Chemistry, 2025, 41(4): 639-649. doi: 10.11862/CJIC.20240397
13. [13]
  Shanghua Li , Malin Li , Xiwen Chi , Xin Yin , Zhaodi Luo , Jihong Yu . 基于高离子迁移动力学的取向ZnQ分子筛保护层实现高稳定水系锌金属负极的构筑. Acta Physico-Chimica Sinica, 2025, 41(1): 2309003-. doi: 10.3866/PKU.WHXB202309003
14. [14]
  Yuchen Zhou , Huanmin Liu , Hongxing Li , Xinyu Song , Yonghua Tang , Peng Zhou . 设计热力学稳定的贵金属单原子光催化剂用于乙醇的高效非氧化转化形成高纯氢和增值产物乙醛. Acta Physico-Chimica Sinica, 2025, 41(6): 100067-. doi: 10.1016/j.actphy.2025.100067
15. [15]
  Qinjin DAI , Shan FAN , Pengyang FAN , Xiaoying ZHENG , Wei DONG , Mengxue WANG , Yong ZHANG . Performance of oxygen vacancy-rich V-doped MnO₂ for high-performance aqueous zinc ion battery. Chinese Journal of Inorganic Chemistry, 2025, 41(3): 453-460. doi: 10.11862/CJIC.20240326
16. [16]
  Pengyang FAN , Shan FAN , Qinjin DAI , Xiaoying ZHENG , Wei DONG , Mengxue WANG , Xiaoxiao HUANG , Yong ZHANG . Preparation and performance of rich 1T-MoS₂ nanosheets for high-performance aqueous zinc ion battery cathode materials. Chinese Journal of Inorganic Chemistry, 2025, 41(4): 675-682. doi: 10.11862/CJIC.20240339
17. [17]
  Zhiwen HU , Weixia DONG , Qifu BAO , Ping LI . Low-temperature synthesis of tetragonal BaTiO₃ for piezocatalysis. Chinese Journal of Inorganic Chemistry, 2024, 40(5): 857-866. doi: 10.11862/CJIC.20230462
18. [18]
  Guimin ZHANG , Wenjuan MA , Wenqiang DING , Zhengyi FU . Synthesis and catalytic properties of hollow AgPd bimetallic nanospheres. Chinese Journal of Inorganic Chemistry, 2024, 40(5): 963-971. doi: 10.11862/CJIC.20230293
19. [19]
  Yuhao SUN , Qingzhe DONG , Lei ZHAO , Xiaodan JIANG , Hailing GUO , Xianglong MENG , Yongmei GUO . Synthesis and antibacterial properties of silver-loaded sod-based zeolite. Chinese Journal of Inorganic Chemistry, 2024, 40(4): 761-770. doi: 10.11862/CJIC.20230169
20. [20]
  Kai CHEN , Fengshun WU , Shun XIAO , Jinbao ZHANG , Lihua ZHU . PtRu/nitrogen-doped carbon for electrocatalytic methanol oxidation and hydrogen evolution by water electrolysis. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1357-1367. doi: 10.11862/CJIC.20230350

Get Citation

PDF

XML

Metrics

PDF Downloads(4)
Abstract views(953)
HTML views(280)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142