Citation: Fu-Shao LI, Ying-Xian XU, Qing-Qing WU, Hu-Jun SHEN, Ming-Sen DENG. Anode Material Sr₂MgMoO₆: Preparation and Catalytic Performance[J]. Chinese Journal of Inorganic Chemistry, ;2022, 38(10): 2028-2036. doi: 10.11862/CJIC.2022.187 shu

Anode Material Sr₂MgMoO₆: Preparation and Catalytic Performance

Guizhou Provincial Key Laboratory of Computational Nano-material Science, Guizhou Education University, Guiyang 550018, China

Corresponding author: Fu-Shao LI, lifushao@126.com Ming-Sen DENG, deng@gznc.edu.cn
Received Date: 12 April 2022
Revised Date: 18 July 2022

Figures(8)

Double-perovskite oxide Sr₂MgMoO₆ (SMMO) was prepared as anode material for solid-oxide fuel cells by the sol-gel route. The effect of the material preparation scenario on the phase constituents, transport property, and catalyzing activity for H₂ oxidization was investigated. The results show that the preparation process of SMMO requires strict control, and a phase-pure sample with a double-perovskite structure can be hardly synthesized by a one-step annealing reaction, and a high purity grade of SMMO requires the repeated thorough mixing and full annealing. In the meanwhile, impurity phase SrMoO₄ in a very small amount is almost unavoidable. The impure substance in samples affects a great deal of the electrical conductivity of this material, and a purer sample exhibits better conductive performance. The purity of SMMO has a tremendous impact on the electrochemical performance of this material, and a purer sample exhibits a lower anode interfacial resistance, a higher catalyzing activity for H₂ oxidizing, and a larger power output of the corresponding single cell. At a temperature of 800 ℃, the area-specific resistance of the SMMO anode was as low as 1.07 Ω·cm², and power output from the corresponding single cell reached to 710 mW·cm^-2.
- solid-oxide fuel cell,
- anode,
- double-perovskite,
- electrochemical performance
1. [1]
  Steele B C H, Heinzel A. Materials for Fuel-Cell Technologies[J]. Nature, 2001,414:345-352. doi: 10.1038/35104620
2. [2]
  Haile S M. Fuel Cell Materials and Components[J]. Acta Mater., 2003,51:5981-6000. doi: 10.1016/j.actamat.2003.08.004
3. [3]
  Wachsman E D, Lee K T. Lowering the Temperature of Solid Oxide Fuel Cells[J]. Science, 2011,334:935-939. doi: 10.1126/science.1204090
4. [4]
  Marinha D, Dessemond L, Djurado E. Comprehensive Review of Current Developments in IT-SOFCs[J]. Curr. Inorg. Chem., 2013,3:2-22. doi: 10.2174/1877944111303010003
5. [5]
  Gao Z, Mogni L V, Miller E C, Railsback J G, Barnett S A. A Perspective on Low-Temperature Solid Oxide Fuel Cells[J]. Energy Environ. Sci., 2016,9:1602-1644. doi: 10.1039/C5EE03858H
6. [6]
  Zhang Y, Knibbe R, Sunarso J, Zhong Y J, Zhou W, Shao Z P, Zhu Z H. Recent Progress on Advanced Materials for Solid-Oxide Fuel Cells Operating below 500 ℃[J]. Adv. Mater., 2017,291700132. doi: 10.1002/adma.201700132
7. [7]
  Shao Z, Haile S M. A High-Performance Cathode for the Next Generation of Solid-Oxide Fuel Cells[J]. Nature, 2004,431:170-173. doi: 10.1038/nature02863
8. [8]
  Mahato N, Banerjee A, Gupta A, Omar S, Balani K. Progress in Material Selection for Solid Oxide Fuel Cell Technology: A Review[J]. Prog. Mater. Sci., 2015,72:141-337. doi: 10.1016/j.pmatsci.2015.01.001
9. [9]
  Zhang Z B, Zhu Y L, Zhong Y J, Zhou W, Shao Z P. Anion Doping: A New Strategy for Developing High-Performance Perovskite-Type Cathode Materials of Solid Oxide Fuel Cells[J]. Adv. Energy Mater., 2017,71700242. doi: 10.1002/aenm.201700242
10. [10]
  Ji Q Q, Bi L, Zhang J T, Cao H J, Zhao X S. The Role of Oxygen Vacancies of ABO₃ Perovskite Oxides in the Oxygen Reduction Reaction[J]. Energy Environ. Sci., 2020,13:1408-1428. doi: 10.1039/D0EE00092B
11. [11]
  Zhu X D, Sun K N, Zhang N Q, Chen X B, Wu L J, Jia D C. Improved Electrochemical Performance of SrCo_0.8Fe_0.2O_3-δ-La_0.45Ce_0.55O_2-δ Composite Cathodes for IT-SOFC[J]. Electrochem. Commun., 2007,9:431-435. doi: 10.1016/j.elecom.2006.09.029
12. [12]
  Zhu X D, Le S R, Chen X B, Sun K N, Yuan Y X, Zhang N Q. Chemical Compatibility, Thermal Expansion Matches and Electrochemical Performance of SrCo_0.8Fe_0.2O_3-δ-La_0.45Ce_0.55O_2-δ Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells[J]. Int. J. Hydrogen Energy, 2011,36:12549-12554. doi: 10.1016/j.ijhydene.2011.06.111
13. [13]
  Fu Q X, Tietz F, Stöver D. La_0.4Sr_0.6Ti_1-xMn_xO_3-δ Perovskites as Anode Materials for Solid Oxide Fuel Cells[J]. J. Electrochem. Soc., 2006,153D74. doi: 10.1149/1.2170585
14. [14]
  Escudero M J, Irvine J T S, Daza L. Development of Anode Material Based on La-Substituted SrTiO₃ Perovskites Doped with Manganese and/or Gallium for SOFC[J]. J. Power Sources, 2009,192:43-50. doi: 10.1016/j.jpowsour.2008.11.132
15. [15]
  Liu Q, Dong X H, Xiao G L, Zhao F, Chen F L. A Novel Electrode Material for Symmetrical SOFCs[J]. Adv. Mater., 2010,22:5478-5482. doi: 10.1002/adma.201001044
16. [16]
  Munoz-Garcia A B, Bugaris D E, Pavone M, Hodges J P, Huq A, Chen F, zur Loye H C, Carter E A. Unveiling Structure-Property Relationships in Sr₂Fe_1.5Mo_0.5O_6-δ, An Electrode Material for Symmetric Solid Oxide Fuel Cells[J]. J. Am. Chem. Soc., 2012,134:6826-6833. doi: 10.1021/ja300831k
17. [17]
  Xie Z X, Zhao H L, Du Z H, Chen T, Chen N, Liu X T, Skinner S J. Effects of Co Doping on the Electrochemical Performance of Double Perovskite Oxide Sr₂MgMoO_6-δ as an Anode Material for Solid Oxide Fuel Cells[J]. J. Phys. Chem. C, 2012,116:9734-9743. doi: 10.1021/jp212505c
18. [18]
  Du Z H, Zhao H L, Yi S, Xia Q, Gong Y, Zhang Y, Cheng X, Li Y, Gu L, Świerczek K. High-Performance Anode Material Sr₂FeMo_0.65Ni_0.35O_6-δ with In Situ Exsolved Nanoparticle Catalyst[J]. ACS Nano, 2016,10:8660-8669. doi: 10.1021/acsnano.6b03979
19. [19]
  Falcón H, Barbero J A, Araujo G, Casais M T, Martínez-Lope M J, Alonso J A, Fierro J L G. Double Perovskite Oxides A₂FeMoO_6-δ (A= Ca, Sr and Ba) as Catalysts for Methane Combustion Appl[J]. Catal. B-Environ., 2004,53:37-45. doi: 10.1016/j.apcatb.2004.05.004
20. [20]
  Vasala S, Yamauchi H, Karppinen M. Role of SrMoO₄ in Sr₂MgMoO₆ Synthesis[J]. J. Solid State Chem., 2011,184:1312-1317. doi: 10.1016/j.jssc.2011.03.045
21. [21]
  Dager P K, Chanquía C M, Mogni L, Caneiro A. Synthesis of Pure-Phase Sr₂MgMoO₆ Nanostructured Powder by the Combustion Method[J]. Mater. Lett., 2015,141:248-251. doi: 10.1016/j.matlet.2014.11.037
22. [22]
  Marrero-López D, Peña-Martínez J, Ruiz-Morales J C, Pérez-Coll D, Aranda M A G, Núñez P. Synthesis, Phase Stability and Electrical Conductivity of Sr₂MgMoO_6-δ Anode[J]. Mater. Res. Bull., 2008,43:2441-2450. doi: 10.1016/j.materresbull.2007.07.032
23. [23]
  Marrero-López D, Peña-Martínez J, Ruiz-Morales J C, Gabás M, Núñez P, Aranda M A G, Ramos-Barrado J R. Redox Behaviour, Chemical Compatibility and Electrochemical Performance of Sr₂MgMoO_6-δ as SOFC Anode[J]. Solid State Ionics, 2010,180:1672-1682. doi: 10.1016/j.ssi.2009.11.005
24. [24]
  Jiang L, Liang G, Han J T, Huang Y H. Effects of Sr-Site Deficiency on Structure and Electrochemical Performance in Sr₂MgMoO₆ for Solid-Oxide Fuel Cell[J]. J. Power Sources, 2014,270:441-448. doi: 10.1016/j.jpowsour.2014.07.079
25. [25]
  Wei T, Huang Y H, Zhang Q, Yuan L X, Yang J Y, Sun Y M, Hu X L, Zhang W X, Goodenough J B. Thermoelectric Solid-Oxide Fuel Cells with Extra Power Conversion from Waste Heat[J]. Chem. Mater., 2012,24:1401-1403. doi: 10.1021/cm300159w
26. [26]
  Huang Y H, Liang G, Croft M, Lehtimäki M, Karppinen M, Goodenough J B. Double-Perovskite Anode Materials Sr₂MMoO₆ (M=Co, Ni) for Solid Oxide Fuel Cells[J]. Chem. Mater., 2009,21:2319-2326. doi: 10.1021/cm8033643
27. [27]
  Zhu X D, Zhang N D, Wu L J, Sun K N, Yuan Y X. Preparation and Performance of Large-Area La_0.9Sr_0.1Ga_0.8Mg_0.2O_3-δ Electrolyte for Intermediate Temperature Solid Oxide Fuel Cell[J]. J. Power Sources, 2010,195:7583-7586. doi: 10.1016/j.jpowsour.2010.05.060
28. [28]
  Li F S, Jiang L, Zeng R, Wang F, Xu Y X, Huang Y H. Hetero-Structured La_0.5Sr_0.5CoO_3-δ/LaSrCoO_4±δ Cathode with High Electrocatalytic Activity for Solid-Oxide Fuel Cells[J]. Int. J. Hydrogen Energy, 2017,42:29463-29471. doi: 10.1016/j.ijhydene.2017.10.001
29. [29]
  Li F S, Xu Y X, Xia S B, Liu J J, Yan Y X, Cheng F X, Jiang L, Huang Y H. LaSrCoO_4±δ@La_0.5Sr_0.5CoO_3-δ Core-Shell Hybrid as the Cathode Materials for Solid Oxide Fuel Cells[J]. J. Alloy. Compd., 2020,819152996. doi: 10.1016/j.jallcom.2019.152996
30. [30]
  Bernuy-Lopez C, Allix M, Bridges C A, Claridge J B, Rosseinsky M J. Sr₂MgMoO_6-δ: Structure, Phase Stability, and Cation Site Order Control of Reduction[J]. Chem. Mater., 2007,19:1035-1043. doi: 10.1021/cm0624116
31. [31]
  Adler S B. Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes[J]. Chem. Rev., 2004,104:4791-4844. doi: 10.1021/cr020724o
32. [32]
  Klotz D, Weber A, Ivers-Tiffée E. Practical Guidelines for Reliable Electrochemical Characterization of Solid Oxide Fuel Cells[J]. Electrochim. Acta, 2017,227:110-126. doi: 10.1016/j.electacta.2016.12.148
1. [1]
  Ru SONG , Biao WANG , Chunling LU , Bingbing NIU , Dongchao QIU . Electrochemical properties of stable and highly active PrBa_0.5Sr_0.5Fe_1.6Ni_0.4O_5+δ cathode material. Chinese Journal of Inorganic Chemistry, 2025, 41(4): 639-649. doi: 10.11862/CJIC.20240397
2. [2]
  Kun Xu , Xinxin Song , Zhilei Yin , Jian Yang , Qisheng Song . Comprehensive Experimental Design of Preferential Orientation of Zinc Metal by Heat Treatment for Enhanced Electrochemical Performance. University Chemistry, 2024, 39(4): 192-197. doi: 10.3866/PKU.DXHX202309050
3. [3]
  Xinpeng LIU , Liuyang ZHAO , Hongyi LI , Yatu CHEN , Aimin WU , Aikui LI , Hao HUANG . Ga₂O₃ coated modification and electrochemical performance of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode material. Chinese Journal of Inorganic Chemistry, 2024, 40(6): 1105-1113. doi: 10.11862/CJIC.20230488
4. [4]
  Yuting ZHANG , Zunyi LIU , Ning LI , Dongqiang ZHANG , Shiling ZHAO , Yu ZHAO . Nickel vanadate anode material with high specific surface area through improved co-precipitation method: Preparation and electrochemical properties. Chinese Journal of Inorganic Chemistry, 2024, 40(11): 2163-2174. doi: 10.11862/CJIC.20240204
5. [5]
  Jiahong ZHENG , Jiajun SHEN , Xin BAI . Preparation and electrochemical properties of nickel foam loaded NiMoO₄/NiMoS₄ composites. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 581-590. doi: 10.11862/CJIC.20230253
6. [6]
  Yuyao Wang , Zhitao Cao , Zeyu Du , Xinxin Cao , Shuquan Liang . Research Progress of Iron-based Polyanionic Cathode Materials for Sodium-Ion Batteries. Acta Physico-Chimica Sinica, 2025, 41(4): 100035-. doi: 10.3866/PKU.WHXB202406014
7. [7]
  Qi Li , Pingan Li , Zetong Liu , Jiahui Zhang , Hao Zhang , Weilai Yu , Xianluo Hu . Fabricating Micro/Nanostructured Separators and Electrode Materials by Coaxial Electrospinning for Lithium-Ion Batteries: From Fundamentals to Applications. Acta Physico-Chimica Sinica, 2024, 40(10): 2311030-. doi: 10.3866/PKU.WHXB202311030
8. [8]
  Zhuo Wang , Xue Bai , Kexin Zhang , Hongzhi Wang , Jiabao Dong , Yuan Gao , Bin Zhao . MOF模板法合成氮掺杂碳材料用于增强电化学钠离子储存和去除. Acta Physico-Chimica Sinica, 2025, 41(3): 2405002-. doi: 10.3866/PKU.WHXB202405002
9. [9]
  Qianwen Han , Tenglong Zhu , Qiuqiu Lü , Mahong Yu , Qin Zhong . 氢电极支撑可逆固体氧化物电池性能及电化学不对称性优化. Acta Physico-Chimica Sinica, 2025, 41(1): 2309037-. doi: 10.3866/PKU.WHXB202309037
10. [10]
  Yixuan Gao , Lingxing Zan , Wenlin Zhang , Qingbo Wei . Comprehensive Innovation Experiment: Preparation and Characterization of Carbon-based Perovskite Solar Cells. University Chemistry, 2024, 39(4): 178-183. doi: 10.3866/PKU.DXHX202311091
11. [11]
  Zhihuan XU , Qing KANG , Yuzhen LONG , Qian YUAN , Cidong LIU , Xin LI , Genghuai TANG , Yuqing LIAO . Effect of graphene oxide concentration on the electrochemical properties of reduced graphene oxide/ZnS. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1329-1336. doi: 10.11862/CJIC.20230447
12. [12]
  Zeyuan WANG , Songzhi ZHENG , Hao LI , Jingbo WENG , Wei WANG , Yang WANG , Weihai SUN . Effect of I₂ interface modification engineering on the performance of all-inorganic CsPbBr₃ perovskite solar cells. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1290-1300. doi: 10.11862/CJIC.20240021
13. [13]
  Fengqiao Bi , Jun Wang , Dongmei Yang . Specialized Experimental Design for Chemistry Majors in the Context of “Dual Carbon”: Taking the Assembly and Performance Evaluation of Zinc-Air Fuel Batteries as an Example. University Chemistry, 2024, 39(4): 198-205. doi: 10.3866/PKU.DXHX202311069
14. [14]
  Yuanchao LI , Weifeng HUANG , Pengchao LIANG , Zifang ZHAO , Baoyan XING , Dongliang YAN , Li YANG , Songlin WANG . Effect of heterogeneous dual carbon sources on electrochemical properties of LiMn_0.8Fe_0.2PO₄/C composites. Chinese Journal of Inorganic Chemistry, 2024, 40(4): 751-760. doi: 10.11862/CJIC.20230252
15. [15]
  Xinyuan Shi , Chenyangjiang , Changyu Zhai , Xuemei Lu , Jia Li , Zhu Mao . Preparation and Photoelectric Performance Characterization of Perovskite CsPbBr₃ Thin Films. University Chemistry, 2024, 39(6): 383-389. doi: 10.3866/PKU.DXHX202312019
16. [16]
  Rui Li , Huan Liu , Yinan Jiao , Shengjian Qin , Jie Meng , Jiayu Song , Rongrong Yan , Hang Su , Hengbin Chen , Zixuan Shang , Jinjin Zhao . 卤化物钙钛矿的单双向离子迁移. Acta Physico-Chimica Sinica, 2024, 40(11): 2311011-. doi: 10.3866/PKU.WHXB202311011
17. [17]
  Hongyi LI , Aimin WU , Liuyang ZHAO , Xinpeng LIU , Fengqin CHEN , Aikui LI , Hao HUANG . Effect of Y(PO₃)₃ double-coating modification on the electrochemical properties of Li[Ni_0.8Co_0.15Al_0.05]O₂. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1320-1328. doi: 10.11862/CJIC.20230480
18. [18]
  Jiaxin Su , Jiaqi Zhang , Shuming Chai , Yankun Wang , Sibo Wang , Yuanxing Fang . Optimizing Poly(heptazine imide) Photoanodes Using Binary Molten Salt Synthesis for Water Oxidation Reaction. Acta Physico-Chimica Sinica, 2024, 40(12): 2408012-. doi: 10.3866/PKU.WHXB202408012
19. [19]
  Jizhou Liu , Chenbin Ai , Chenrui Hu , Bei Cheng , Jianjun Zhang . 六氯锡酸铵促进钙钛矿太阳能电池界面电子转移及其飞秒瞬态吸收光谱研究. Acta Physico-Chimica Sinica, 2024, 40(11): 2402006-. doi: 10.3866/PKU.WHXB202402006
20. [20]
  Xiaoyao YIN , Wenhao ZHU , Puyao SHI , Zongsheng LI , Yichao WANG , Nengmin ZHU , Yang WANG , Weihai SUN . Fabrication of all-inorganic CsPbBr₃ perovskite solar cells with SnCl₂ interface modification. Chinese Journal of Inorganic Chemistry, 2025, 41(3): 469-479. doi: 10.11862/CJIC.20240309

Get Citation

PDF

XML

Metrics

PDF Downloads(7)
Abstract views(854)
HTML views(253)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Anode Material Sr2MgMoO6: Preparation and Catalytic Performance

Metrics

通讯作者: 陈斌, bchen63@163.com

Anode Material Sr₂MgMoO₆: Preparation and Catalytic Performance