Citation: Dong-Yuan LEI, Yu-Yun LI, Zi-Rui ZHAO, Jian-Xiang DUAN, Hong LI, Ming-Wu XIANG, Jun-Ming GUO. Preparation and Lithium-Storage Performance of In-Situ Nitrogen Doped Porous Carbon/Sulfur Composite Cathodes Derived from Passiflora Edulis Peel[J]. Chinese Journal of Inorganic Chemistry, ;2022, 38(5): 873-883. doi: 10.11862/CJIC.2022.091 shu

Preparation and Lithium-Storage Performance of In-Situ Nitrogen Doped Porous Carbon/Sulfur Composite Cathodes Derived from Passiflora Edulis Peel

Dong-Yuan LEI ^{1, 2} ,
Yu-Yun LI ^{1, 2} ,
Zi-Rui ZHAO ^{1, 2} ,
Jian-Xiang DUAN ^{1, 2} ,
Hong LI ^{1, 2} ,
Ming-Wu XIANG ^{1, 2,,} ,
Jun-Ming GUO ^{1, 2,,}

1.
National and Local Joint Engineering Research Center for Green Preparation Technology of Biobased Materials, Yunnan Minzu University, Kunming 650500, China
2.
Key Laboratory of Green‑Chemical Materials in University of Yunnan Province, Yunnan Minzu University, Kunming 650500, China

Corresponding author: Ming-Wu XIANG, xmwbboy@163.com Jun-Ming GUO, guojunming@tsinghua.org.cn
Received Date: 22 December 2021
Revised Date: 16 March 2022

Figures(10)

An in-situ nitrogen-doped hierarchical porous carbon material was prepared via a simultaneous activation/carbonization process using biomass passiflora edulis peel and KHCO₃ as carbon source and activator, respectively. The as-prepared porous carbon was composited with elemental sulfur to obtain the porous carbon/sulfur cathode material. The phase composition, microstructure, specific surface area, and pore structure of the as-prepared materials were investigated by these characterization techniques including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and so on. Also, the adsorption effect of polysulfides using porous carbon as an adsorbing material was studied by UV-Vis absorption spectroscopy. The electrochemical performances of porous carbon/sulfur composite cathodes with different sulfur content from 60% to 80% were studied by galvanostatic charge/discharge test. Results showed that the asprepared material was amorphous porous carbon with a high specific surface area of 1 093 m² ·g^-1 and pore volume of 0.63 cm³·g^-1. The physicochemical synergistic adsorption of polysulfides through abundant porous structure and in‑situ nitrogen doping effectively suppresses the"shuttle effect"of lithium-sulfur batteries, whilst improving the discharge capacity and cycle performance. Consequently, the porous carbon/sulfur composite cathode with a sulfur content of 60% delivered high initial discharge capacities of 1 057.7 and 763.4 mAh·g^-1 at 0.05C and 0.2C, respectively. At a high current rate of 1C, a long life of 300 cycles with a capacity retention rate of 75% can be achieved.
- lithium-sulfur batteries,
- biomass,
- passiflora edulis peel,
- carbon/sulfur composites,
- hierarchical porous structure
1. [1]
  Chen L, Feng J R, Zhou H H, Fu C P, Wang G C, Yang L M, Xu C X, Chen Z X, Yang W J, Kuang Y F. Hydrothermal Preparation of Nitrogen, Boron Co-doped Curved Graphene Nanoribbons with High Dopant Amounts for High-Performance Lithium Sulfur Battery Cathodes[J]. J. Mater. Chem. A, 2017,5:7403-7415. doi: 10.1039/C7TA01265A
2. [2]
  LIU H D, JIA G D, ZHU S, SHENG J, ZHANG Z Y, LI Y. Functionalized Carbon-Based Composite Materials for Cathode Performance of Lithium-Sulfur Batteries[J]. Acta Chim. Sinica, 2022,80(1):89-97.
3. [3]
  Hua W X, Li H, Pei C, Xia J Y, Sun Y F, Zhang C, Lv W, Tao Y, Jiao Y, Zhang B S, Qiao S Z, Wan Y, Yan Q H. Selective Catalysis Remedies Polysulfide Shuttling in Lithium-Sulfur Batteries[J]. Adv. Mater., 2021,33(38)2101006. doi: 10.1002/adma.202101006
4. [4]
  Xiang M W, Wang Y, Wu J H, Guo Y, Wu H, Zhang Y, Liu H. Natural Silk Cocoon Derived Nitrogen-Doped Porous Carbon Nanosheets for High Performance Lithium-Sulfur Batteries[J]. Electrochim. Acta, 2017,227:7-16. doi: 10.1016/j.electacta.2016.11.139
5. [5]
  Seh Z W, Sun Y M, Zhang Q F, Cui Y. Designing High-Energy Lithium-Sulfur Batteries[J]. Chem. Soc. Rev., 2016,45:5605-5634. doi: 10.1039/C5CS00410A
6. [6]
  Liang J, Sun Z H, Li F, Cheng H M. Carbon Materials for Li-S Batteries: Functional Evolution and Performance Improvement[J]. Energy Storage Mater., 2016,2:76-106. doi: 10.1016/j.ensm.2015.09.007
7. [7]
  Seo S D, Choi C H, Kim D W. Fabrication of Sulfur-Impregnated Porous Carbon Nanostructured Electrodes via Dual-Mode Activation for Lithium-Sulfur Batteries[J]. Mater. Lett., 2016,172:116-119. doi: 10.1016/j.matlet.2016.02.135
8. [8]
  Fan L, Li Z, Kang W, Cheng B. Biomass-Derived Tube-like Nitrogen and Oxygen Dual-Doped Porous Carbon in the Sulfur Cathode for Lithium Sulfur Battery[J]. Renewable Energy, 2020,155:309-316. doi: 10.1016/j.renene.2020.03.153
9. [9]
  XU J J, LI B, LI S M, LIU J H, YU M. Preparation and Electrochemical Performance of Sulfur/Mesoporous Carbon Composites as Cathodes for Lithium-Sulfur Batteries[J]. Chinese J. Inorg. Chem., 2015,31(10):2030-2036.
10. [10]
  BenÍTez A, Amaro-Gahete J, Chien Y C, Caballero Á, Morales J, Brandell D. Recent Advances in Lithium-Sulfur Batteries Using Biomass-Derived Carbons as Sulfur Host[J]. Renewable Sustainable Energy Rev., 2022,154111783. doi: 10.1016/j.rser.2021.111783
11. [11]
  Jin B Y, Li Y, Qian J, Zhan X L, Zhang Q H. Environmentally Friendly Binders for Lithium-Sulfur Batteries[J]. ChemElectroChem, 2020,7:4158-4176. doi: 10.1002/celc.202000993
12. [12]
  Han D D, Wang Z Y, Pan G L, Gao X P. Metal-Organic-Framework-Based Gel Polymer Electrolyte with Immobilized Anions to Stabilize a Lithium Anode for a Quasi-Solid-State Lithium-Sulfur Battery[J]. ACS Appl. Mater. Interfaces, 2019,11:18427-18435. doi: 10.1021/acsami.9b03682
13. [13]
  CHEN F, CHENG X Q, ZHAO Z X, WANG X M. Hierarchical Porous N, P Co-doped rGO Modified Separator to Enhance the Cycling Stability of Lithium-Sulfur Batteries[J]. Acta Chim. Sinica, 2021,79(7):941-947.
14. [14]
  Li P Y, Deng J N, Li J, Guo J Q, Zeng M, Wang L G, Wang R, Tang M Q. Bifunctional Interlayer for Capturing Polysulfide in Li-S Battery[J]. J. Mater. Sci., 2019,54:11983-11990. doi: 10.1007/s10853-019-03755-7
15. [15]
  LI R, SUN X G, ZOU J Y, HE Q. NMAP Interlayer for Inhibiting Shuttle Effect of Lithium-Sulfur Battery[J]. Chinese J. Inorg. Chem., 2020,36(4):673-680.
16. [16]
  Bai Y, Zhao Y B, Li W D, Meng L H, Bai Y P, Chen G R. Organic-Inorganic Multi-scale Enhanced Interfacial Engineering of Sulfide Solid Electrolyte in Li-S Battery[J]. Chem. Eng. J., 2020,396:125334-125343. doi: 10.1016/j.cej.2020.125334
17. [17]
  Yao Y X, Zhang X Q, Li B Q, Yan C, Chen P Y, Huang J Q, Zhang Q. A Compact Inorganic Layer for Robust Anode Protection in Lithium-Sulfur Batteries[J]. Infomat, 2019,2:379-388.
18. [18]
  WANG X, LIU Y J, JIA Y F, JI L, HU Q L, DUAN L M, LIU J H. Preparative Chemistry of N-Containing Porous Carbon Nanofibers for Capacity Improvement in Lithium-Sulfur Battery[J]. Chem. J. Chinese Universities, 2020,41(4):829-837.
19. [19]
  Chen Y Y, Xu P, Liu Q B, Yuan D, Long X, Zhu S K. Cobalt Embedded in Porous Carbon Fiber Membranes for High-Performance Lithium-Sulfur Batteries[J]. Carbon, 2022,187:187-195. doi: 10.1016/j.carbon.2021.11.015
20. [20]
  Li N, Cao W Y, Liu Y W, Ye H Q, Han K. Impeding Polysulfide Shuttling with a Three-Dimensional Conductive Carbon Nanotubes/Mxene Framework Modified Separator for Highly Efficient Lithium-Sulfur Batteries[J]. Colloids Surf. A, 2019,573:128-136. doi: 10.1016/j.colsurfa.2019.04.054
21. [21]
  Yang X X, Xia G, Ye J J, Du W Z, Zheng Z Q, Zhang A Z, Li X T, Chen C Z, Hu C. High-Content Co-N_x Sites on Carbon Nanotubes for Effective Sulfur Catalysis in Lithium-Sulfur Batteries[J]. Appl. Surf. Sci., 2021,541148632. doi: 10.1016/j.apsusc.2020.148632
22. [22]
  Lu Q Q, Wang X Y, Cao J, Chen C, Chen K N, Zhao Z F, Niu Z Q, Chen J. Freestanding Carbon Fiber Cloth/Sulfur Composites for Flexible Room-Temperature Sodium-Sulfur Batteries[J]. Energy Storage Mater., 2017,8:77-84. doi: 10.1016/j.ensm.2017.05.001
23. [23]
  Li Z Y, Zou Y L, Duan J L, Long B, Du Y Y. Long-Cycle Stability for Li-S Batteries by Carbon Nanofibers/Reduced Graphene Oxide as Host Cathode Material[J]. Ionics, 2019,25:1659-1668. doi: 10.1007/s11581-019-02897-7
24. [24]
  An Y L, Wei P, Fan M Q, Chen D, Chen H C, Ju Q J, Tian G L, Shu K Y. Dual-Shell Hollow Polyaniline/Sulfur-Core/Polyaniline Composites Improving the Capacity and Cycle Performance of Lithium-Sulfur Batteries[J]. Appl. Surf. Sci., 2016,375:215-222. doi: 10.1016/j.apsusc.2016.03.070
25. [25]
  Arie A A, Kristianto H, Cengiz E C, Demir-Cakan R. Waste Tea-Based Porous Carbon-Sulfur Composite Cathodes for Lithium-Sulfur Battery[J]. Ionics, 2019,26:201-212.
26. [26]
  Arie A A, Kristianto H, Cengiz E C, Demir-Cakan R. Activated Porous Carbons Originated from the Indonesian Snake Skin Fruit Peel as Cathode Components for Lithium Sulfur Battery[J]. Ionics, 2018,25:2121-2129.
27. [27]
  Liu J, Liu B, Wang C W, Huang Z X, Hu L C, Ke X, Liu L Y, Shi Z C, Guo Z P. Walnut Shell-Derived Activated Carbon: Synthesis and Its Application in the Sulfur Cathode for Lithium-Sulfur Batteries[J]. J. Alloys Compd., 2017,718:373-378. doi: 10.1016/j.jallcom.2017.05.206
28. [28]
  Chen X J, Du G H, Zhang M, Kalam A, Su Q M, Ding S K. Nitrogen-Doped Hierarchical Porous Carbon Derived from Low-Cost Biomass Pomegranate Residues for High Performance Lithium-Sulfur Batteries[J]. J. Electroanal. Chem., 2019,848113316. doi: 10.1016/j.jelechem.2019.113316
29. [29]
  Zhang Y G, Zhao Y, Konarov A, Li Z, Chen P. Effect of Mesoporous Carbon Microtube Prepared by Carbonizing the Poplar Catkin on Sulfur Cathode Performance in Li/S Batteries[J]. J. Alloys Compd., 2015,619:298-302. doi: 10.1016/j.jallcom.2014.09.055
30. [30]
  Li M, Hu P, Wang X, Niu Z H, Zhou Q H, Wang Q Y, Zhu M M, Guo C, Zhang L, Lu J Y, Li J F. Hierarchical Porous Carbon Derived from Peanut Hull for Polysulfide Confinement in Lithium-Sulfur Batteries[J]. Energy Technol., 2019,7(3)1800898. doi: 10.1002/ente.201800898
31. [31]
  Wu J, Hu J, Song K X, Xu J M, Gao H F. Spirulina-Derived Nitrogen-Doped Porous Carbon as Carbon/S Composite Cathodes for High Cyclability Lithium-Sulphur Batteries[J]. J. Alloys Compd., 2017,704:1-6. doi: 10.1016/j.jallcom.2017.02.052
32. [32]
  Yang K P, Yan J J, He R Y, Li D, Li Y, Li T, Ren B Z. Nitrogen-Doped Porous Carbon was Prepared from Peony Shell for the Cathode Material of Lithium-Sulfur Battery[J]. J. Electroanal. Chem., 2020,861113922. doi: 10.1016/j.jelechem.2020.113922
33. [33]
  Song Y, Wang H, Ma Q L, Li D, Yu W S, Liu G X, Wang T T, Yang Y, Dong X Y, Wang J X. Dandelion Derived Nitrogen-Doped Hollow Carbon Host for Encapsulating Sulfur in Lithium Sulfur Battery[J]. ACS Sustainable Chem. Eng., 2018,7:3042-3051.
34. [34]
  Arie A A, Kristianto H, Susanti R F, Lee J K. Rambutan Peel Derived Porous Carbons for Lithium Sulfur Battery[J]. SN Appl. Sci., 2021,3(5)541. doi: 10.1007/s42452-021-04540-5
35. [35]
  Deng J, Xiong T Y, Xu F, Li M M, Han C L, Gong Y T, Wang H Y, Wang Y. Inspired by Bread Leavening: One-Pot Synthesis of Hierarchically Porous Carbon for Supercapacitors[J]. Green Chem., 2015,17:4053-4060. doi: 10.1039/C5GC00523J
36. [36]
  Xiang M W, Yang L, Zheng Y F, Huang J, Jing P, Wu H, Zhang Y, Liu H. Freestanding and Flexible Nitrogen-Doped Carbon Foam/Sulfur Cathode Composited with Reduced Graphene Oxide for High Sulfur Loading Lithium-Sulfur Batteries[J]. J. Mater. Chem. A, 2017,5:18020-18028. doi: 10.1039/C7TA04962E
37. [37]
  Peng Y M, Sheng M J, Quan S H, Ji W A, Yang T F, Shu W Y, Hong Q, Ming W R. Atomic Layer Deposited TiO₂ on a Nitrogen-Doped Graphene/Sulfur Electrode for High Performance Lithium-Sulfur Batteries[J]. Energy Environ. Sci., 2016,9:1495-1503. doi: 10.1039/C5EE03902A
38. [38]
  Xie J, Yang J, Zhou X Y, Zou Y L, Tang J J, Wang S C, Chen F. Preparation of Three-Dimensional Hybrid Nanostructure-Encapsulated Sulfur Cathode for High-Rate Lithium Sulfur Batteries[J]. J. Power Sources, 2014,253:55-63. doi: 10.1016/j.jpowsour.2013.12.074
39. [39]
  Qian X Y, Li F, Yang X F, Jin L A, Yao S S, Shen X Q, Li T B, Qin S B. Decoration Of Indium Tin Oxide Nanoparticles with Different Crystal Structures and Morphologies on Polypropylene Separator for Li-S Battery[J]. Int. J. Energy Res., 2021,45:8992-9005. doi: 10.1002/er.6432
1. [1]
  Ruiqing LIU , Wenxiu LIU , Kun XIE , Yiran LIU , Hui CHENG , Xiaoyu WANG , Chenxu TIAN , Xiujing LIN , Xiaomiao FENG . Three-dimensional porous titanium nitride as a highly efficient sulfur host. Chinese Journal of Inorganic Chemistry, 2024, 40(5): 867-876. doi: 10.11862/CJIC.20230441
2. [2]
  Yu ZHANG , Fangfang ZHAO , Cong PAN , Peng WANG , Liangming WEI . Application of double-side modified separator with hollow carbon material in high-performance Li-S battery. Chinese Journal of Inorganic Chemistry, 2024, 40(6): 1218-1232. doi: 10.11862/CJIC.20230412
3. [3]
  Peng XU , Shasha WANG , Nannan CHEN , Ao WANG , Dongmei YU . Preparation of three-layer magnetic composite Fe₃O₄@polyacrylic acid@ZiF-8 for efficient removal of malachite green in water. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 544-554. doi: 10.11862/CJIC.20230239
4. [4]
  Weihan Zhang , Menglu Wang , Ankang Jia , Wei Deng , Shuxing Bai . 表面硫物种对钯-硫纳米片加氢性能的影响. Acta Physico-Chimica Sinica, 2024, 40(11): 2309043-. doi: 10.3866/PKU.WHXB202309043
5. [5]
  Zhaomei LIU , Wenshi ZHONG , Jiaxin LI , Gengshen HU . Preparation of nitrogen-doped porous carbons with ultra-high surface areas for high-performance supercapacitors. Chinese Journal of Inorganic Chemistry, 2024, 40(4): 677-685. doi: 10.11862/CJIC.20230404
6. [6]
  Hongyao Li , Youyan Liu , Luwei Dai , Min Yang , Qihui Wang . The Blessing of Indium Sulfide：Confronting the Narrow Path with Uric Acid. University Chemistry, 2024, 39(5): 325-335. doi: 10.3866/PKU.DXHX202311104
7. [7]
  Qi Li , Pingan Li , Zetong Liu , Jiahui Zhang , Hao Zhang , Weilai Yu , Xianluo Hu . Fabricating Micro/Nanostructured Separators and Electrode Materials by Coaxial Electrospinning for Lithium-Ion Batteries: From Fundamentals to Applications. Acta Physico-Chimica Sinica, 2024, 40(10): 2311030-. doi: 10.3866/PKU.WHXB202311030
8. [8]
  Yonghui ZHOU , Rujun HUANG , Dongchao YAO , Aiwei ZHANG , Yuhang SUN , Zhujun CHEN , Baisong ZHU , Youxuan ZHENG . Synthesis and photoelectric properties of fluorescence materials with electron donor-acceptor structures based on quinoxaline and pyridinopyrazine, carbazole, and diphenylamine derivatives. Chinese Journal of Inorganic Chemistry, 2024, 40(4): 701-712. doi: 10.11862/CJIC.20230373
9. [9]
  Jiahong ZHENG , Jiajun SHEN , Xin BAI . Preparation and electrochemical properties of nickel foam loaded NiMoO₄/NiMoS₄ composites. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 581-590. doi: 10.11862/CJIC.20230253
10. [10]
  Jinyao Du , Xingchao Zang , Ningning Xu , Yongjun Liu , Weisi Guo . Electrochemical Thiocyanation of 4-Bromoethylbenzene. University Chemistry, 2024, 39(6): 312-317. doi: 10.3866/PKU.DXHX202310039
11. [11]
  Haitang WANG , Yanni LING , Xiaqing MA , Yuxin CHEN , Rui ZHANG , Keyi WANG , Ying ZHANG , Wenmin WANG . Construction, crystal structures, and biological activities of two Ln^Ⅲ₃ complexes. Chinese Journal of Inorganic Chemistry, 2024, 40(8): 1474-1482. doi: 10.11862/CJIC.20240188
12. [12]
  Yuanchao LI , Weifeng HUANG , Pengchao LIANG , Zifang ZHAO , Baoyan XING , Dongliang YAN , Li YANG , Songlin WANG . Effect of heterogeneous dual carbon sources on electrochemical properties of LiMn_0.8Fe_0.2PO₄/C composites. Chinese Journal of Inorganic Chemistry, 2024, 40(4): 751-760. doi: 10.11862/CJIC.20230252
13. [13]
  Min LI , Xianfeng MENG . Preparation and microwave absorption properties of ZIF-67 derived Co@C/MoS₂ nanocomposites. Chinese Journal of Inorganic Chemistry, 2024, 40(10): 1932-1942. doi: 10.11862/CJIC.20240065
14. [14]
  Xin Zhou , Zhi Zhang , Yun Yang , Shuijin Yang . A Study on the Enhancement of Photocatalytic Performance in C/Bi/Bi₂MoO₆ Composites by Ferroelectric Polarization: A Recommended Comprehensive Chemical Experiment. University Chemistry, 2024, 39(4): 296-304. doi: 10.3866/PKU.DXHX202310008
15. [15]
  Kun WANG , Wenrui LIU , Peng JIANG , Yuhang SONG , Lihua CHEN , Zhao DENG . Hierarchical hollow structured BiOBr-Pt catalysts for photocatalytic CO₂ reduction. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1270-1278. doi: 10.11862/CJIC.20240037
16. [16]
  Jinyi Sun , Lin Ma , Yanjie Xi , Jing Wang . Preparation and Electrocatalytic Nitrogen Reduction Performance Study of Vanadium Nitride@Nitrogen-Doped Carbon Composite Nanomaterials: A Recommended Comprehensive Chemistry Experiment. University Chemistry, 2024, 39(4): 184-191. doi: 10.3866/PKU.DXHX202310094
17. [17]
  Junke LIU , Kungui ZHENG , Wenjing SUN , Gaoyang BAI , Guodong BAI , Zuwei YIN , Yao ZHOU , Juntao LI . Preparation of modified high-nickel layered cathode with LiAlO₂/cyclopolyacrylonitrile dual-functional coating. Chinese Journal of Inorganic Chemistry, 2024, 40(8): 1461-1473. doi: 10.11862/CJIC.20240189
18. [18]
  Xiaofeng Zhu , Bingbing Xiao , Jiaxin Su , Shuai Wang , Qingran Zhang , Jun Wang . Transition Metal Oxides/Chalcogenides for Electrochemical Oxygen Reduction into Hydrogen Peroxides. Acta Physico-Chimica Sinica, 2024, 40(12): 2407005-. doi: 10.3866/PKU.WHXB202407005
19. [19]
  Meng Lin , Hanrui Chen , Congcong Xu . Preparation and Study of Photo-Enhanced Electrocatalytic Oxygen Evolution Performance of ZIF-67/Copper(I) Oxide Composite: A Recommended Comprehensive Physical Chemistry Experiment. University Chemistry, 2024, 39(4): 163-168. doi: 10.3866/PKU.DXHX202308117
20. [20]
  Xin MA , Ya SUN , Na SUN , Qian KANG , Jiajia ZHANG , Ruitao ZHU , Xiaoli GAO . A Tb₂ complex based on polydentate Schiff base: Crystal structure, fluorescence properties, and biological activity. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1347-1356. doi: 10.11862/CJIC.20230357

Get Citation

PDF

XML

Metrics

PDF Downloads(10)
Abstract views(673)
HTML views(126)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142