李正名院士是我国著名的教育家、化学家和农药学家。在李先生逝世3周年之际，李正名奖学金捐赠暨首届颁奖仪式在南开大学举行。本文结合一部分典型的具体事例，对李正名先生的教育家精神和科学家精神进行了介绍，从中折射出他始终如一的坚定爱国信念和无私奉献精神。青年学子通过学习李先生的光辉事迹，可以深入了解老一辈科学家浓厚的家国情怀。本文有助于激励当代大学生厚植爱国主义理想与信念，增强自主创新意识和能力，立志为中华民族的伟大复兴贡献自己的全部力量。

智能水凝胶是一类具有三维网络结构的高亲水性高分子聚合物材料，能快速感知和响应环境的变化。本项目以食用海带为原料提取海藻酸，利用其与不同金属离子的交联能力不同，制得具有金属离子响应能力的海藻酸水凝胶，成功用于软硬水鉴别、维生素C和金属离子检测。项目通过设计趣味实验开展梯度科普，生动阐释智能水凝胶的形成原理和应用实例。学龄前儿童和小学生可以通过简单的操作制备出五彩缤纷的凝胶球，趣味性强。中学生和社会公众可用简单的生活器具从海带中提取海藻酸并制备出水凝胶，用于软硬水的鉴别和水果中维生素C的测定，生活化与科学性相结合，激发参与者学习化学的兴趣和热情。大学生可以通过实验研究智能水凝胶的分析检测性能，结合光度法检测铁离子和维生素C的含量，培养其综合素质。项目集趣味性、生活化和科学性于一体，层次丰富、可行性高。该项目有望助力化学从实验室走入生活，服务公众；也可推动更多人了解化学、走进化学、发展化学。

采用原位聚合法制备了氯氧化铋(BiOCl)与聚苯胺(PANI)复合的Ⅱ型异质结光催化剂BiOCl/PANI，并采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)和N2吸附-脱附测试等多种技术手段对其进行了表征，考察了BiOCl/PANI在模拟可见光下对罗丹明B (RhB)的光催化降解性能。实验结果表明：BiOCl/PANI催化剂比PANI和BiOCl具有更高的光催化活性，在RhB质量浓度为50 mg·L^-1、PANI与BiOCl的物质的量之比为0.02∶1、50 mg·L^-1的催化剂条件下，所制备的BiOCl/PANI光催化150 min后，RhB降解率为98.8%，速率常数为0.031 min^-1；经过4次循环实验后，RhB降解率从98.8%降低至98.4%，表现出良好的稳定性和可重复利用性。光催化剂BiOCl/PANI实现了电子和空穴对的快速分离，降低了二者在催化剂内部的复合速率，提高了光催化性能。

仪器分析实验“分子荧光法测定罗丹明B的含量”存在实验过于简单、未考虑实际情况等问题。因此，本改进实验在三维荧光扫描模式下获取样本数据，不进行复杂预处理，而是运用化学计量学算法解析出目标分析物的纯信号，进而实现了染色辣椒中罗丹明6G和123的同时测定。本改进实验提高了学生全面考虑问题和创新解决问题的能力。

A simple two-step hydrothermal method synthesized four different CdS/Fe₃O₄ photocatalysts with varying ratios of mass of CdS to Fe₃O₄. The composition and morphology of the prepared samples were investigated using X-ray diffraction (XRD), Raman spectrum, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Solid UV reflectance spectra testing found that CdS/Fe₃O₄ nanocomposites had good light absorption throughout the spectral range, promoting their photocatalytic properties. Under visible light irradiation, CdS/Fe₃O₄ (2:5) with a mass ratio of 2:5 exhibited excellent photocatalytic performance, with a degradation rate of 98.8% for rhodamine B. Furthermore, after five cycles of photocatalytic degradation reaction, the rhodamine B degradation rate remained at 96.2%, indicating that the photocatalysts have good photocatalytic stability.

A flower-like BiOBr photocatalyst (CS/BiOBr) was prepared by using the carbon material derived from corn straw (CS) as the carrier. The prepared composites were characterized by X - ray diffraction (XRD), Fourier transform infrared (FIIR) spectra, scanning electron microscope (SEM), X - ray photoelectron spectra (XPS), and UV-Vis diffuse reflectance spectra (UV-Vis DRS). The SEM analyses indicate that the introduction of CS promotes the formation of a unique flower-like structure in BiOBr, which not only optimizes the efficiency of light capture but also increases the specific surface area of BiOBr. The bandgap of the composite was narrower compared with the pure BiOBr. The CS/BiOBr composites exhibited higher photocatalytic activity than pure CS and BiOBr under visible light irradiation, and a higher first-order reaction rate constant (k) of 0.043 7 min^-1 than BiOBr (0.014 6 min^-1), and exhibited excellent stability and reusability during the cyclic run. The enhanced photocatalytic activity is attributed to the efficient separation of photoinduced electrons and holes. Superoxide radicals and holes were the major active species.

Bi₂O₃@BiVO₄ composites were synthesized using the solvothermal method with ethylene glycol as the solvent. Bi₂O₃ was grown on the surface of BiVO₄ by regulating the reaction temperature. The adsorption performance of the composite for rhodamine B (RhB) was investigated. The results indicate that the reaction temperature significantly impacts the morphology and adsorption performance of Bi₂O₃@BiVO₄. The Bi₂O₃@BiVO₄ composite prepared at 180 ℃ (180-BO@BVO) consisted of nanoparticles with an average size of 7 nm, featuring a higher concentration of oxygen vacancies on the surface, but with a lower specific surface area (only 1.2 m²·g^-1). 180-BO@BVO, with oxygen species adsorbed at surface oxygen vacancies carrying a negative charge, achieved an impressive RhB removal efficiency of up to 83.0% through electrostatic interaction with RhB. The adsorption process follows the Langmuir isotherm and the pseudo-second-order kinetic model, suggesting that it is predominantly governed by chemical adsorption. After five cycles of adsorption experiments, the removal efficiency of RhB by composites remained basically unchanged (more than 80%), demonstrating excellent regeneration performance.

本文介绍了一种污水处理方法——光催化-非均相芬顿耦合技术，引导学生以光芬顿降解罗丹明B作为研究对象。采用原位离子交换反应制备硫化FeOCl (FeS/FeOCl)异质结催化剂，表征其结构、形貌和光学性质，并探究其光芬顿降解罗丹明B的性能。该实验易于操作，现象明显，有助于提高本科生的实验操作技能，培养科研能力，并增强环保意识。

水热、溶剂热合成是无机合成中的一类重要方法，特别在晶体合成、纳米材料制备中具有特殊地位。规范地进行水热、溶剂热合成有利于提高化学合成的成功率、减少试剂浪费、延长仪器使用寿命及降低事故风险。本文简要介绍260 °C以下水热反应的原理和适用对象，重点说明实验室最常用于水热合成的外加热型高压反应釜的使用流程、操作要点及其注意事项，提出水热合成的基本操作规范建议，为国内同行和相关学生开展水热合成实验教学和科研实践提供参考。

将三聚氰胺、RuCl₃及炭黑以一定的比例分散于乙醇中，采用旋转蒸干及高温热处理合成了一种氮掺杂碳(NC)负载Ru的Ru/NC催化剂。采用硼氢化钠液相化学还原法合成了不同Pt、Ru负载量的PtRu/NC催化剂，并用于电催化甲醇氧化反应(MOR)及电催化分解水析氢反应(HER)。结果表明，合成的催化剂中Pt₁Ru/NC(Pt、Ru的实际负载量分别为1.14%、0.54%)表现出最优的MOR性能，质量活性达4.96 A·mg_PtRu^-1，且经10 000 s稳定性测试后质量活性保持在测试前的91.1%。同时，当电流密度为100mA·cm^-2时，Pt₁Ru/NC在HER中表现出最低的过电位(103 mV)和最小的Tafel斜率(15.29 mV·dec^-1)。通过X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描透射电子显微镜(STEM)、电感耦合等离子体发射光谱(ICP-OES)、STEM-能谱(STEM-EDS)技术表征了PtRu/NC双金属催化剂，其具有优异催化性能的原因如下：(1) PtRu双金属纳米颗粒高度分散于NC上；(2) Pt以纳米团簇或单原子形式负载于Ru上，后负载于NC，形成了Pt-Ru相分离结构；(3) Pt、Ru与N之间存在协同效应。