随着人工智能技术的快速发展，其在化学教育中的应用已成为教育变革的核心驱动力。本文以卤代正丁烷合成实验为例，基于南开大学AI创新平台(NK-GeniOS)，构建了红外光谱智能识别与教学辅助系统。通过单调性抗锯齿优化法实现了对于图片形式的红外谱图中产品及杂质红外吸收峰的快速准确识别，通过设计分析Agent与评价Agent的多智能体协同机制，系统实现了对实验数据的精准解析与个性化反馈，解决了传统教学中谱图解读依赖教师经验、缺乏实时指导的痛点。此外，通过组建项目小组，以“研究-汇报-讨论”的模式实现了实验教学的分层赋能，不同层次的学生都能有所收获，并极大地激发了学生的科研兴趣，79%的同学开始愿意参与到类似的研究中，参与翻转课堂的意愿也从20%提高到71%。

采用原位聚合法制备了氯氧化铋(BiOCl)与聚苯胺(PANI)复合的Ⅱ型异质结光催化剂BiOCl/PANI，并采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)和N2吸附-脱附测试等多种技术手段对其进行了表征，考察了BiOCl/PANI在模拟可见光下对罗丹明B (RhB)的光催化降解性能。实验结果表明：BiOCl/PANI催化剂比PANI和BiOCl具有更高的光催化活性，在RhB质量浓度为50 mg·L^-1、PANI与BiOCl的物质的量之比为0.02∶1、50 mg·L^-1的催化剂条件下，所制备的BiOCl/PANI光催化150 min后，RhB降解率为98.8%，速率常数为0.031 min^-1；经过4次循环实验后，RhB降解率从98.8%降低至98.4%，表现出良好的稳定性和可重复利用性。光催化剂BiOCl/PANI实现了电子和空穴对的快速分离，降低了二者在催化剂内部的复合速率，提高了光催化性能。

仪器分析实验“分子荧光法测定罗丹明B的含量”存在实验过于简单、未考虑实际情况等问题。因此，本改进实验在三维荧光扫描模式下获取样本数据，不进行复杂预处理，而是运用化学计量学算法解析出目标分析物的纯信号，进而实现了染色辣椒中罗丹明6G和123的同时测定。本改进实验提高了学生全面考虑问题和创新解决问题的能力。

课程思政的有效融入是教学质量提升和高素质人才培养的关键。我们以“电动势法测定化学反应的热力学函数”这一实验项目为例，构建了一次深入的实验探究与思政教育相结合的教学实践活动。通过对电动势测定原理和方法的探讨以及反应热力学量的导出，学生们不仅深化了对相关基础理论知识的理解，提升了他们解决实际问题的实验技能和创新能力;同时强化了学生的家国情怀以及责任担当意识。

A simple two-step hydrothermal method synthesized four different CdS/Fe₃O₄ photocatalysts with varying ratios of mass of CdS to Fe₃O₄. The composition and morphology of the prepared samples were investigated using X-ray diffraction (XRD), Raman spectrum, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Solid UV reflectance spectra testing found that CdS/Fe₃O₄ nanocomposites had good light absorption throughout the spectral range, promoting their photocatalytic properties. Under visible light irradiation, CdS/Fe₃O₄ (2:5) with a mass ratio of 2:5 exhibited excellent photocatalytic performance, with a degradation rate of 98.8% for rhodamine B. Furthermore, after five cycles of photocatalytic degradation reaction, the rhodamine B degradation rate remained at 96.2%, indicating that the photocatalysts have good photocatalytic stability.

A flower-like BiOBr photocatalyst (CS/BiOBr) was prepared by using the carbon material derived from corn straw (CS) as the carrier. The prepared composites were characterized by X - ray diffraction (XRD), Fourier transform infrared (FIIR) spectra, scanning electron microscope (SEM), X - ray photoelectron spectra (XPS), and UV-Vis diffuse reflectance spectra (UV-Vis DRS). The SEM analyses indicate that the introduction of CS promotes the formation of a unique flower-like structure in BiOBr, which not only optimizes the efficiency of light capture but also increases the specific surface area of BiOBr. The bandgap of the composite was narrower compared with the pure BiOBr. The CS/BiOBr composites exhibited higher photocatalytic activity than pure CS and BiOBr under visible light irradiation, and a higher first-order reaction rate constant (k) of 0.043 7 min^-1 than BiOBr (0.014 6 min^-1), and exhibited excellent stability and reusability during the cyclic run. The enhanced photocatalytic activity is attributed to the efficient separation of photoinduced electrons and holes. Superoxide radicals and holes were the major active species.

Bi₂O₃@BiVO₄ composites were synthesized using the solvothermal method with ethylene glycol as the solvent. Bi₂O₃ was grown on the surface of BiVO₄ by regulating the reaction temperature. The adsorption performance of the composite for rhodamine B (RhB) was investigated. The results indicate that the reaction temperature significantly impacts the morphology and adsorption performance of Bi₂O₃@BiVO₄. The Bi₂O₃@BiVO₄ composite prepared at 180 ℃ (180-BO@BVO) consisted of nanoparticles with an average size of 7 nm, featuring a higher concentration of oxygen vacancies on the surface, but with a lower specific surface area (only 1.2 m²·g^-1). 180-BO@BVO, with oxygen species adsorbed at surface oxygen vacancies carrying a negative charge, achieved an impressive RhB removal efficiency of up to 83.0% through electrostatic interaction with RhB. The adsorption process follows the Langmuir isotherm and the pseudo-second-order kinetic model, suggesting that it is predominantly governed by chemical adsorption. After five cycles of adsorption experiments, the removal efficiency of RhB by composites remained basically unchanged (more than 80%), demonstrating excellent regeneration performance.

本文介绍了一种污水处理方法——光催化-非均相芬顿耦合技术，引导学生以光芬顿降解罗丹明B作为研究对象。采用原位离子交换反应制备硫化FeOCl (FeS/FeOCl)异质结催化剂，表征其结构、形貌和光学性质，并探究其光芬顿降解罗丹明B的性能。该实验易于操作，现象明显，有助于提高本科生的实验操作技能，培养科研能力，并增强环保意识。