采用原位聚合法制备了氯氧化铋(BiOCl)与聚苯胺(PANI)复合的Ⅱ型异质结光催化剂BiOCl/PANI，并采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)和N2吸附-脱附测试等多种技术手段对其进行了表征，考察了BiOCl/PANI在模拟可见光下对罗丹明B (RhB)的光催化降解性能。实验结果表明：BiOCl/PANI催化剂比PANI和BiOCl具有更高的光催化活性，在RhB质量浓度为50 mg·L^-1、PANI与BiOCl的物质的量之比为0.02∶1、50 mg·L^-1的催化剂条件下，所制备的BiOCl/PANI光催化150 min后，RhB降解率为98.8%，速率常数为0.031 min^-1；经过4次循环实验后，RhB降解率从98.8%降低至98.4%，表现出良好的稳定性和可重复利用性。光催化剂BiOCl/PANI实现了电子和空穴对的快速分离，降低了二者在催化剂内部的复合速率，提高了光催化性能。

酰胺合成是有机化学重要的研究方向之一。将国际前沿的酰胺合成方法引入到基础有机化学实验教学中可以丰富教学内容并促进本科教学与科研成果之间的融合。本文报道了一个以氮杂环卡宾催化醛的极性反转为知识重点的酰胺合成实验，以苯甲醛、亚硝基苯为原料，在无水无氧条件下实现了N-羟基-N-苯基苯甲酰胺的高效合成。该实验利用薄层色谱对反应过程进行监测，并通过红外、核磁共振波谱确定了产物结构。该实验具有操作简单、反应条件温和、高原子经济性、可重复性好等特点，非常适用于本科生实验教学。本实验将极性反转这一重要概念与氮杂环卡宾催化这一科学前沿有机结合起来，有利于激发和培养学生的科研兴趣。

仪器分析实验“分子荧光法测定罗丹明B的含量”存在实验过于简单、未考虑实际情况等问题。因此，本改进实验在三维荧光扫描模式下获取样本数据，不进行复杂预处理，而是运用化学计量学算法解析出目标分析物的纯信号，进而实现了染色辣椒中罗丹明6G和123的同时测定。本改进实验提高了学生全面考虑问题和创新解决问题的能力。

在pH = 5缓冲溶液条件下，对仅有Co²⁺、仅有Ni²⁺、Co²⁺与Ni²⁺混合三种情况下Co²⁺的萃取率进行了探究。结果显示单独萃取Co²⁺时萃取率高达75.47%；然而对于混合溶液，萃取率较单独萃取Co²⁺明显下降。通过系列对比实验发现Ni²⁺的存在对Co²⁺的分光光度测量造成了干扰。因此，在综合性实验中我们利用分光光度法针对Co²⁺的萃取率进行分析，以及对可能影响萃取率的因素——pH、萃取时间、萃取次数进行了探究，寻找最佳实验条件，提高萃取率。

In this study, sawdust served as a carbon source and urea as a nitrogen source to synthesize carbon- supported, nitrogen-doped TiO₂ composites via a one-pot solvothermal method. The composites were characterized using FTIR, powder X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, thermogravimetry-derivative thermogravimetry, scanning electron microscopy-energy dispersive spectroscopy, and transmission electron microscopy. Results indicated that all synthesized composites exhibit the anatase phase, with those calcined at 800 ℃ demonstrating enhanced crystallinity. Nitrogen is incorporated into the TiO₂ lattice, while carbon is predominantly located on the surface. Photodegradation experiments showed that 20 mg of composite N-TiO₂/C-800 achieved degradation rates of 93.4% for methylene blue (20 mg·L^-1, 50 mL) and 99.4% for oxytetracycline (20 mg·L^-1, 50 mL) within 30 min. Free radical capture experiments indicated that h⁺ was the primary active species in the photocatalytic degradation process.

A simple two-step hydrothermal method synthesized four different CdS/Fe₃O₄ photocatalysts with varying ratios of mass of CdS to Fe₃O₄. The composition and morphology of the prepared samples were investigated using X-ray diffraction (XRD), Raman spectrum, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Solid UV reflectance spectra testing found that CdS/Fe₃O₄ nanocomposites had good light absorption throughout the spectral range, promoting their photocatalytic properties. Under visible light irradiation, CdS/Fe₃O₄ (2:5) with a mass ratio of 2:5 exhibited excellent photocatalytic performance, with a degradation rate of 98.8% for rhodamine B. Furthermore, after five cycles of photocatalytic degradation reaction, the rhodamine B degradation rate remained at 96.2%, indicating that the photocatalysts have good photocatalytic stability.

A flower-like BiOBr photocatalyst (CS/BiOBr) was prepared by using the carbon material derived from corn straw (CS) as the carrier. The prepared composites were characterized by X - ray diffraction (XRD), Fourier transform infrared (FIIR) spectra, scanning electron microscope (SEM), X - ray photoelectron spectra (XPS), and UV-Vis diffuse reflectance spectra (UV-Vis DRS). The SEM analyses indicate that the introduction of CS promotes the formation of a unique flower-like structure in BiOBr, which not only optimizes the efficiency of light capture but also increases the specific surface area of BiOBr. The bandgap of the composite was narrower compared with the pure BiOBr. The CS/BiOBr composites exhibited higher photocatalytic activity than pure CS and BiOBr under visible light irradiation, and a higher first-order reaction rate constant (k) of 0.043 7 min^-1 than BiOBr (0.014 6 min^-1), and exhibited excellent stability and reusability during the cyclic run. The enhanced photocatalytic activity is attributed to the efficient separation of photoinduced electrons and holes. Superoxide radicals and holes were the major active species.

Bi₂O₃@BiVO₄ composites were synthesized using the solvothermal method with ethylene glycol as the solvent. Bi₂O₃ was grown on the surface of BiVO₄ by regulating the reaction temperature. The adsorption performance of the composite for rhodamine B (RhB) was investigated. The results indicate that the reaction temperature significantly impacts the morphology and adsorption performance of Bi₂O₃@BiVO₄. The Bi₂O₃@BiVO₄ composite prepared at 180 ℃ (180-BO@BVO) consisted of nanoparticles with an average size of 7 nm, featuring a higher concentration of oxygen vacancies on the surface, but with a lower specific surface area (only 1.2 m²·g^-1). 180-BO@BVO, with oxygen species adsorbed at surface oxygen vacancies carrying a negative charge, achieved an impressive RhB removal efficiency of up to 83.0% through electrostatic interaction with RhB. The adsorption process follows the Langmuir isotherm and the pseudo-second-order kinetic model, suggesting that it is predominantly governed by chemical adsorption. After five cycles of adsorption experiments, the removal efficiency of RhB by composites remained basically unchanged (more than 80%), demonstrating excellent regeneration performance.

本文介绍了一种污水处理方法——光催化-非均相芬顿耦合技术，引导学生以光芬顿降解罗丹明B作为研究对象。采用原位离子交换反应制备硫化FeOCl (FeS/FeOCl)异质结催化剂，表征其结构、形貌和光学性质，并探究其光芬顿降解罗丹明B的性能。该实验易于操作，现象明显，有助于提高本科生的实验操作技能，培养科研能力，并增强环保意识。

利用溶胶凝胶法制备出一种三角形Au@TiO₂核壳材料。经过水热晶化，该材料膨胀至300 nm，壳层TiO₂晶化为介孔锐钛矿相，但核心三角形Au颗粒的形貌保持不变。采用粉末X射线衍射(PXRD)、ζ电位、高分辨透射电子显微镜(HRTEM)、热重分析(TGA)、光致发光(PL)光谱、光电流(i-t)以及光催化降解技术，对样品的结构和性能进行了系统、详细的检测与分析。经过晶化处理的Au@TiO₂在可见光波段的光降解亚甲蓝性能比未晶化时有了显著的提升, 1 mg·mL^-1 Au@c-TiO₂可以在可见光照射1 h后实现对60 mg·L^-1亚甲蓝全降解。电子顺磁共振(EPR)测试表明·O₂^-和·OH两种自由基对光降解起到了很大作用。通过综合分析实验结果和时域有限差分(FDTD)分析，探究了催化反应的机理。