激光诱导羟基磷灰石夹层纸表面碳化实现无墨打印

引用本文: 王俊鉴, 于清泉, 刘舜尧, 陈玉客, 刘晓雨, 李国栋, 刘晓燕, 刘宏, 周伟家. 激光诱导羟基磷灰石夹层纸表面碳化实现无墨打印[J]. 物理化学学报, 2024, 40(4): 230402. doi: 10.3866/PKU.WHXB202304024 shu

Citation: Junjian Wang, Qingquan Yu, Shunyao Liu, Yuke Chen, Xiaoyu Liu, Guodong Li, Xiaoyan Liu, Hong Liu, Weijia Zhou. Laser-Induced Carbonization of Hydroxyapatite Sandwich Paper for Inkless Printing[J]. Acta Physico-Chimica Sinica, 2024, 40(4): 230402. doi: 10.3866/PKU.WHXB202304024 shu

激光诱导羟基磷灰石夹层纸表面碳化实现无墨打印

王俊鉴 ^1,2, ,
于清泉 ^1, ,
刘舜尧 ^1, ,
陈玉客 ^1, ,
刘晓雨 ^1,3, ,
李国栋 ^4, ,
刘晓燕 ^{1,
,} ,
刘宏 ^1,3, ,
周伟家 ^{1,
,}

1.
济南大学化学化工学院, 前沿交叉科学研究院, 济南 250022;
2.
济南大学材料科学与工程学院, 济南 250022;
3.
山东大学, 晶体材料国家重点实验室, 济南 250100;
4.
齐鲁工业大学(山东省科学院), 生物基材料与绿色造纸国家重点实验室, 济南 250353

通讯作者: 刘晓燕,Email:ifc_liuxy@ujn.edu.cn; 周伟家,Email:ifc_zhouwj@ujn.edu.cn

基金项目:
国家自然科学基金(52022037,52102171),山东省泰山学者(tsqn201812083),山东省自然科学基金(2021CXGC010603,ZR2021JQ15,ZR2020QE071,ZR2020LLZ006,ZR2021MB035)及济南创新团队(2021GXRC019)资助项目

摘要: 传统的油墨打印具有方便快捷的优势，但打印过程中墨水或碳粉的大量使用对人体和环境造成了不可忽视的危害。基于激光的高能粒子特性和光热辐射热效应，利用激光欠焦和聚焦两种工作模式，可实现激光无墨打印和微区加工。本文报道了一种基于羟基磷灰石的“有机-无机-有机”三明治结构多功能纸，并利用激光的光热辐射效应使功能纸表层有机材料——纤维素纤维表面温度升高，实现表层均匀碳化，夹层无机材料——羟基磷灰石阻挡能量继续传导防止纸张烧穿，以此来达到无墨打印的效果。基于激光烧蚀的无墨打印，能够显著降低打印成本，有利于激光烧蚀打印技术的推广。此外，采用激光烧蚀打印技术作用于功能纸上的打印效果具有稳定、绿色环保等特点，在档案存储用纸、食品包装用纸和后天致盲患者阅读等方面具有广泛的应用。

关键词:

English

Laser-Induced Carbonization of Hydroxyapatite Sandwich Paper for Inkless Printing

1.
Institute for Advanced Interdisciplinary Research(iAIR), School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022, China;
2.
School of Materials Science and Engineering, University of Jinan, Jinan 250022, China;
3.
State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100, China;
4.
State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology(Shandong Academy of Sciences), Jinan 250353, China

Corresponding author: Xiaoyan Liu, ; Weijia Zhou,

Received Date: 13 April 2023
Accepted Date: 08 June 2023
Revised Date: 06 June 2023
Available Online: 15 June 2023
Fund Project:
The project was supported by the National Natural Science Foundation of China (52022037, 52102171), the Taishan Scholar Project of Shandong Province (tsqn201812083), the Natural Science Foundation of Shandong Province (2021CXGC010603, ZR2021JQ15, ZR2020QE071, ZR2020LLZ006, ZR2021MB035), and the Innovative Team Project of Jinan (2021GXRC019).

Abstract: Traditional ink printing is convenient, but the excessive use of ink in this process has harmed both human health and the environment. Inkless printing technologies are mainly thermal and photosensitive in nature; however, they are susceptible to environmental impact, resulting in unstable printing and easy fading. In recent years, laser ablation printing technology has received considerable attention. However, the energy of the laser acting on the paper surface is affected by the surface roughness and tightness of the paper, which makes it difficult to obtain a uniform printing effect. Therefore, a complex and expensive paper-laser monitoring feedback system is required for modulating the laser parameters in real time to obtain uniform printing; however, such a system is not conducive to the popularization of laser ablation printing technology. To address this issue, a laser-induced inkless printing method, combined with micro-zone processing, is proposed. The associated high-energy characteristics and the thermal effect of laser are examined in this study. A multifunctional paper with an “organic-inorganic-organic” sandwich structure is constructed by vacuum filtration combined with thermocompression, using hydroxyapatite as the thermal insulating layer and wood fiber as the carbonized layer. The obtained functional papers display high flexibility, high tensile strength, and excellent flame resistance. Laser-induced inkless printing is realized via laser under-focusing or laser focusing onto hydroxyapatite sandwich paper. When the laser is irradiated on the surface of the functional paper, the surface-located cellulose fibers are carbonized due to the photothermal radiation effect of the laser, leaving graphitized carbon on the surface of hydroxyapatite layer. Notably, the hydroxyapatite in the interlayer of the functional paper is an outstanding thermal insulation material, which can effectively prevent further transfer of laser energy. Thus, owing to the sandwich structure of the multifunctional paper, laser inkless printing of both words and patterns is realized. This innovative approach offers a sustainable solution to traditional ink printing, while also providing a new avenue for micro-zone processing. The printed text or patterns can be preserved in harsh environments for long periods to be used for the storage of archival data. Meanwhile, the laser inkless printing method provides a new kind of touch reading material for acquired blindness, which avoids long-term contact with toxic printing ink. This study demonstrates that the hydroxyapatite sandwich paper is critical to realizing laser inkless printing without using expensive monitoring feedback systems, thus significantly reducing printing costs and effectively mitigating environmental pollution, marking it as an ideal technology for widespread adoption.

Key words:

1. [1]
  (1) Geng, J.; Xu, L.; Yan, W.; Shi, L.; Qiu, M. Nat. Commun. 2023, 14, 565. doi: 10.1038/s41467-023-36275-9(1) Geng, J.; Xu, L.; Yan, W.; Shi, L.; Qiu, M. Nat. Commun. 2023, 14, 565. doi: 10.1038/s41467-023-36275-9
2. [2]
  (2) Arı, A. Atmos. Pollut. Res. 2020, 11, 269. doi: 10.1016/j.apr.2019.10.013(2) Arı, A. Atmos. Pollut. Res. 2020, 11, 269. doi: 10.1016/j.apr.2019.10.013
3. [3]
  (3) Zou, C.; Jiang, M.; Huang, H.; Chen, H.; Sheng, L.; Li, J.; Yu, C. Air Qual. Atmos. Health 2022, 15, 1427. doi: 10.1007/s11869-022-01174-3(3) Zou, C.; Jiang, M.; Huang, H.; Chen, H.; Sheng, L.; Li, J.; Yu, C. Air Qual. Atmos. Health 2022, 15, 1427. doi: 10.1007/s11869-022-01174-3
4. [4]
  (4) Wang, Y.; Zhao, Q.; Du, X. Mater. Horizons 2020, 7, 1341. doi: 10.1039/D0MH00150C(4) Wang, Y.; Zhao, Q.; Du, X. Mater. Horizons 2020, 7, 1341. doi: 10.1039/D0MH00150C
5. [5]
  (5) Garai, B.; Mallick, A.; Banerjee, R. Chem. Sci. 2016, 7, 2195. doi: 10.1039/c5sc04450b(5) Garai, B.; Mallick, A.; Banerjee, R. Chem. Sci. 2016, 7, 2195. doi: 10.1039/c5sc04450b
6. [6]
  (6) Li, L.; Tu, Z.; Hua, Y.; Li, X.; Wang, H.; Zhang, H. Inorg. Chem. Front. 2019, 6, 3077. doi: 10.1039/c9qi01037h(6) Li, L.; Tu, Z.; Hua, Y.; Li, X.; Wang, H.; Zhang, H. Inorg. Chem. Front. 2019, 6, 3077. doi: 10.1039/c9qi01037h
7. [7]
  (7) Yu, C.; Wang, P.; Liu, Q.; Cai, L.; Guo, G. C. Cryst. Growth Des. 2021, 21, 1323. doi: 10.1021/acs.cgd.0c01597(7) Yu, C.; Wang, P.; Liu, Q.; Cai, L.; Guo, G. C. Cryst. Growth Des. 2021, 21, 1323. doi: 10.1021/acs.cgd.0c01597
8. [8]
  (8) Kan, W.-Q.; Wen, S.; He, Y.; Xu, C. Inorg. Chem. 2017, 56, 14926. doi: 10.1021/acs.inorgchem.7b02206(8) Kan, W.-Q.; Wen, S.; He, Y.; Xu, C. Inorg. Chem. 2017, 56, 14926. doi: 10.1021/acs.inorgchem.7b02206
9. [9]
  (9) Wang, P.; Yu, C.; Wang, M.; Guo, G. Dyes Pigm. 2021, 185, 108888. doi: 10.1016/j.dyepig.2020.108888(9) Wang, P.; Yu, C.; Wang, M.; Guo, G. Dyes Pigm. 2021, 185, 108888. doi: 10.1016/j.dyepig.2020.108888
10. [10]
  (10) Yang, F.; Dong, Z.; Kang, R.; Liu, C.; Wu, D.; Ma, G. Optik 2023, 273, 170509. doi: 10.1016/j.ijleo.2023.170509(10) Yang, F.; Dong, Z.; Kang, R.; Liu, C.; Wu, D.; Ma, G. Optik 2023, 273, 170509. doi: 10.1016/j.ijleo.2023.170509
11. [11]
  (11) Lin, G.; Ji, P.; Wang, M.; Meng, Y. Int. Commun. Heat Mass Transf. 2023, 142, 106649. doi: 10.1016/j.icheatmasstransfer.2023.106649(11) Lin, G.; Ji, P.; Wang, M.; Meng, Y. Int. Commun. Heat Mass Transf. 2023, 142, 106649. doi: 10.1016/j.icheatmasstransfer.2023.106649
12. [12]
  (12) Yang, Z.; Liu, H.; He, Y. Acta Phys. -Chim. Sin. 2016, 32, 1977. [杨镇, 刘海, 何远航. 物理化学学报, 2016, 32, 1977.] doi: 10.3866/PKU.WHXB201604293
13. [13]
  (13) Peter, Z. Carbohydr. Polym. 2021, 254, 117417. doi: 10.1016/j.carbpol.2020.117417(13) Peter, Z. Carbohydr. Polym. 2021, 254, 117417. doi: 10.1016/j.carbpol.2020.117417
14. [14]
  (14) Wang, W.; Wang, Y.; Zhan, Z.; Tan, T.; Deng, W.; Zhang, Q.; Wang, Y. Acta Phys. -Chim. Sin. 2022, 38, 2205032. [王伟, 王瑶, 占自祥, 谭天, 邓卫平, 张庆红, 王野. 物理化学学报, 2022, 38, 2205032.] doi: 10.3866/PKU.WHXB2022205032
15. [15]
  (15) Uskoković, V.; Ignjatović, N.; Škapin, S.; Uskoković, D. P. Ceram. Int. 2022, 48, 27693. doi: 10.1016/j.ceramint.2022.06.068(15) Uskoković, V.; Ignjatović, N.; Škapin, S.; Uskoković, D. P. Ceram. Int. 2022, 48, 27693. doi: 10.1016/j.ceramint.2022.06.068
16. [16]
  (16) Zhou, Y.; Qiu, S.; Ding, L.; Chu, F.; Liu, W.; Yang, W.; Hu, W.; Hu, Y. Chem. Eng. J. 2022, 437, 135489. doi: 10.1016/j.cej.2022.135489(16) Zhou, Y.; Qiu, S.; Ding, L.; Chu, F.; Liu, W.; Yang, W.; Hu, W.; Hu, Y. Chem. Eng. J. 2022, 437, 135489. doi: 10.1016/j.cej.2022.135489
17. [17]
  (17) Kang, N..; Lee, J.; Kim, D. J. Control. Release 2022, 342, 111. doi: 10.1016/j.jconrel.2021.12.039(17) Kang, N..; Lee, J.; Kim, D. J. Control. Release 2022, 342, 111. doi: 10.1016/j.jconrel.2021.12.039
18. [18]
  (18) Chen, F. F.; Zhu, Y. J.; Xiong, Z. C.; Sun, T. W.; Shen, Y. Q. ACS Appl. Mater. Interfaces 2016, 8, 34715. doi: 10.1021/acsami.6b12838(18) Chen, F. F.; Zhu, Y. J.; Xiong, Z. C.; Sun, T. W.; Shen, Y. Q. ACS Appl. Mater. Interfaces 2016, 8, 34715. doi: 10.1021/acsami.6b12838
19. [19]
  (19) Zheng, Y.; Ma, W.; Yang, Z.; Zhang, H.; Ma, J.; Li, T.; Niu, H.; Zhou, Y.; Yao, Q.; Chang, J.; et al. Chem. Eng. J. 2022, 430, 132912. doi: 10.1016/j.cej.2021.132912(19) Zheng, Y.; Ma, W.; Yang, Z.; Zhang, H.; Ma, J.; Li, T.; Niu, H.; Zhou, Y.; Yao, Q.; Chang, J.; et al. Chem. Eng. J. 2022, 430, 132912. doi: 10.1016/j.cej.2021.132912
20. [20]
  (20) Wang, X.; Xue, J.; Ma, B.; Wu, J.; Chang, J.; Gelinsky, M.; Wu, C. Adv. Mater. 2020, 32, 2005140. doi: 10.1002/adma.202005140(20) Wang, X.; Xue, J.; Ma, B.; Wu, J.; Chang, J.; Gelinsky, M.; Wu, C. Adv. Mater. 2020, 32, 2005140. doi: 10.1002/adma.202005140
21. [21]
  (21) Gao, J.; Hao, L.; Ning, B.; Zhu, Y.; Guan, J.; Ren, H.; Yu, H.; Zhu, Y.; Duan, J. Coatings 2022, 12, 479. doi: 10.3390/coatings12040479(21) Gao, J.; Hao, L.; Ning, B.; Zhu, Y.; Guan, J.; Ren, H.; Yu, H.; Zhu, Y.; Duan, J. Coatings 2022, 12, 479. doi: 10.3390/coatings12040479
22. [22]
  (22) Wang, Z.; Zhu, Y.; Chen, Y.; Yu, H.; Xiong, Z. Chem. Eng. J. 2022, 444, 136470. doi: 10.1016/j.cej.2022.136470(22) Wang, Z.; Zhu, Y.; Chen, Y.; Yu, H.; Xiong, Z. Chem. Eng. J. 2022, 444, 136470. doi: 10.1016/j.cej.2022.136470
23. [23]
  (23) Boukha, Z.; Bermejo-López, A.; Pereda-Ayo, B.; González-Marcos, J. A.; González-Velasco, J. R. Appl. Catal. B 2022, 314, 121500. doi: 10.1016/j.apcatb.2022.121500(23) Boukha, Z.; Bermejo-López, A.; Pereda-Ayo, B.; González-Marcos, J. A.; González-Velasco, J. R. Appl. Catal. B 2022, 314, 121500. doi: 10.1016/j.apcatb.2022.121500
24. [24]
  (24) Miao, Y.; Tian, W.; Han, J.; Li, N.; Chen, D.; Xu, Q.; Lu, J. Nano Energy 2022, 100, 107473. doi: 10.1016/j.nanoen.2022.107473(24) Miao, Y.; Tian, W.; Han, J.; Li, N.; Chen, D.; Xu, Q.; Lu, J. Nano Energy 2022, 100, 107473. doi: 10.1016/j.nanoen.2022.107473
25. [25]
  (25) Li, H.; Wu, D.; Wu, J.; Dong, L.-Y.; Zhu, Y.-J.; Hu, X. Adv. Mater. 2017, 29, 1703548. doi: 10.1002/adma.201703548(25) Li, H.; Wu, D.; Wu, J.; Dong, L.-Y.; Zhu, Y.-J.; Hu, X. Adv. Mater. 2017, 29, 1703548. doi: 10.1002/adma.201703548
26. [26]
  (26) Chen, F.; Zhu, Y.; Chen, F.; Dong, L.; Yang, R.; Xiong, Z. ACS Nano 2018, 12, 3159. doi: 10.1021/acsnano.8b00047(26) Chen, F.; Zhu, Y.; Chen, F.; Dong, L.; Yang, R.; Xiong, Z. ACS Nano 2018, 12, 3159. doi: 10.1021/acsnano.8b00047
27. [27]
  (27) Rehman, I.; Bonfield, W. J. Mater. Sci. Mater. Med. 1997, 8, 1. doi: 10.1023/A:1018570213546(27) Rehman, I.; Bonfield, W. J. Mater. Sci. Mater. Med. 1997, 8, 1. doi: 10.1023/A:1018570213546
28. [28]
  (28) Zhang, Q. Q.; Zhu, Y.; Wu, J.; Dong, L. ACS Sustain. Chem. Eng. 2019, 7,17198. doi: 10.1021/acssuschemeng.9b03793(28) Zhang, Q. Q.; Zhu, Y.; Wu, J.; Dong, L. ACS Sustain. Chem. Eng. 2019, 7,17198. doi: 10.1021/acssuschemeng.9b03793
29. [29]
  (29) Shen, Y.; Yang, Z.; Wu, J. Acta Phys. -Chim. Sin. 1999, 15, 9. [沈玉华, 杨展澜, 吴瑾光. 物理化学学报, 1999, 15, 9.] doi: 10.3866/PKU.WHXB19991203
30. [30]
  (30) Morán, J. I.; Alvarez, V. A.; Cyras, V. P.; Vázquez, A. Cellulose 2008, 15, 149. doi: 10.1007/s10570-007-9145-9(30) Morán, J. I.; Alvarez, V. A.; Cyras, V. P.; Vázquez, A. Cellulose 2008, 15, 149. doi: 10.1007/s10570-007-9145-9
31. [31]
  (31) Scapini, T.; dos Santos, M. S. N.; Bonatto, C.; Wancura, J. H. C.; Mulinari, J.; Camargo, A. F.; Klanovicz, N.; Zabot, G. L.; Tres, M. V.; Fongaro, G.; et al. Bioresour. Technol. 2021, 342, 126033. doi: 10.1016/j.biortech.2021.126033(31) Scapini, T.; dos Santos, M. S. N.; Bonatto, C.; Wancura, J. H. C.; Mulinari, J.; Camargo, A. F.; Klanovicz, N.; Zabot, G. L.; Tres, M. V.; Fongaro, G.; et al. Bioresour. Technol. 2021, 342, 126033. doi: 10.1016/j.biortech.2021.126033
32. [32]
  (32) Xu, K.; Xiao, Y.; Cao, Y.; Peng, S.; Fan, M.; Wang, K. Carbohydr. Polym. 2019, 209, 382. doi: 10.1016/j.carbpol.2018.12.040(32) Xu, K.; Xiao, Y.; Cao, Y.; Peng, S.; Fan, M.; Wang, K. Carbohydr. Polym. 2019, 209, 382. doi: 10.1016/j.carbpol.2018.12.040
33. [33]
  (33) Zhao, L.; Liu, Z.; Chen, D.; Liu, F.; Yang, Z.; Li, X.; Yu, H.; Liu, H.; Zhou, W. Micro Nano Lett. 2021, 13, 49. doi: 10.1007/s40820-020-00577-0(33) Zhao, L.; Liu, Z.; Chen, D.; Liu, F.; Yang, Z.; Li, X.; Yu, H.; Liu, H.; Zhou, W. Micro Nano Lett. 2021, 13, 49. doi: 10.1007/s40820-020-00577-0
34. [34]
  (34) Li, J.; Bai, X.; Fang, Y.; Chen, Y.; Wang, X.; Chen, H.; Yang, H. Combust Flame 2020, 215, 1. doi: 10.1016/j.combustflame.2020.01.016(34) Li, J.; Bai, X.; Fang, Y.; Chen, Y.; Wang, X.; Chen, H.; Yang, H. Combust Flame 2020, 215, 1. doi: 10.1016/j.combustflame.2020.01.016
35. [35]
  (35) Volpe, M.; Messineo, A.; Mäkelä, M.; Barr, M. R.; Volpe, R.; Corrado, C.; Fiori, L. Fuel Process. Technol. 2020, 206, 106456. doi: 10.1016/j.fuproc.2020.106456(35) Volpe, M.; Messineo, A.; Mäkelä, M.; Barr, M. R.; Volpe, R.; Corrado, C.; Fiori, L. Fuel Process. Technol. 2020, 206, 106456. doi: 10.1016/j.fuproc.2020.106456
36. [36]
  (36) Chen, J.; Wang, Y.; Xie, J.; Meng, C.; Wu, G.; Zu, Q. Carbohydr. Polym. 2012, 89, 849. doi: 10.1016/j.carbpol.2012.04.020(36) Chen, J.; Wang, Y.; Xie, J.; Meng, C.; Wu, G.; Zu, Q. Carbohydr. Polym. 2012, 89, 849. doi: 10.1016/j.carbpol.2012.04.020
37. [37]
  (37) Gieroba, B.; Kalisz, G.; Krysa, M.; Khalavka, M.; Przekora, A. Int. J. Mol. Sci. 2023, 24, 2630. doi: 10.3390/ijms24032630(37) Gieroba, B.; Kalisz, G.; Krysa, M.; Khalavka, M.; Przekora, A. Int. J. Mol. Sci. 2023, 24, 2630. doi: 10.3390/ijms24032630
38. [38]
  (38) Bengtsson, A.; Hecht, P.; Sommertune, J.; Ek, M.; Sedin, M.; Sjöholm, E. ACS Sustain. Chem. Eng. 2020, 8, 6826. doi: 10.1021/acssuschemeng.0c01734(38) Bengtsson, A.; Hecht, P.; Sommertune, J.; Ek, M.; Sedin, M.; Sjöholm, E. ACS Sustain. Chem. Eng. 2020, 8, 6826. doi: 10.1021/acssuschemeng.0c01734
39. [39]
  (39) Chen, Y.; Wang, Y.; Yu, J.; Xiong, G.; Niu, H.; Li, Y.; Sun, D.; Zhang, X.; Liu, H.; Zhou, W. Adv. Sci. 2022, 9, 2105869. doi: 10.1002/advs.202105869(39) Chen, Y.; Wang, Y.; Yu, J.; Xiong, G.; Niu, H.; Li, Y.; Sun, D.; Zhang, X.; Liu, H.; Zhou, W. Adv. Sci. 2022, 9, 2105869. doi: 10.1002/advs.202105869

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 219
HTML全文浏览量: 19

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

激光诱导羟基磷灰石夹层纸表面碳化实现无墨打印

通讯作者: 刘晓燕,Email:ifc_liuxy@ujn.edu.cn; 周伟家,Email:ifc_zhouwj@ujn.edu.cn

English

Laser-Induced Carbonization of Hydroxyapatite Sandwich Paper for Inkless Printing

Corresponding author: Xiaoyan Liu, ; Weijia Zhou,

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

激光诱导羟基磷灰石夹层纸表面碳化实现无墨打印

通讯作者: 刘晓燕,Email:ifc_liuxy@ujn.edu.cn; 周伟家,Email:ifc_zhouwj@ujn.edu.cn

English

Laser-Induced Carbonization of Hydroxyapatite Sandwich Paper for Inkless Printing

Corresponding author: Xiaoyan Liu, ; Weijia Zhou,

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs