Citation: Yingying Zhu, Yong Wang, Miao Xu, Yongmin Wu, Weiping Tang, Di Zhu, Yu-Shi He, Zi-Feng Ma, Linsen Li. Tracking Pressure Changes and Morphology Evolution of Lithium Metal Anodes[J]. Acta Physico-Chimica Sinica, ;2023, 39(1): 211004. doi: 10.3866/PKU.WHXB202110040 shu

Tracking Pressure Changes and Morphology Evolution of Lithium Metal Anodes

Yingying Zhu ¹ ,
Yong Wang ¹ ,
Miao Xu ³ ,
Yongmin Wu ³ ,
Weiping Tang ³ ,
Di Zhu ⁴ ,
Yu-Shi He ¹ ,
Zi-Feng Ma ¹ ,
Linsen Li ^{1, 2,,}

1.
Department of Chemical Engineering, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, Shanghai 200240, China
2.
Shanghai Jiao Tong University Sichuan Research Institute, Chengdu 610213, China
3.
State Key Laboratory of Space Power-sources Technology, Shanghai Institute of Space Power-Sources, Shanghai 200245, China
4.
Shandong Academy of Sciences, Energy Research Institute, Qilu University of Technology, Jinan 250014, China

Corresponding author: Linsen Li, linsenli@sjtu.edu.cn
Received Date: 26 October 2021
Revised Date: 20 November 2021
Accepted Date: 22 November 2021
Available Online: 29 November 2021
Fund Project: the Natural Science Foundation of Shanghai the Science and Technology Commission Shanghai Municipality 19ZR1475100the Equipment Pre-research Fund 61407210207the Sichuan Science and Technology Program 2021JDRC0015

High-energy rechargeable lithium metal batteries (LMBs) have attracted significant attention recently. These batteries can be bulit using high areal-capacity (> 4 mAh∙cm⁻²) layered oxide cathodes and thin lithium (Li) metal anodes (< 50 μm in thickness), whose cycle performance are severely limited by the unregulated growth of Li particles having high surface areas, including dendrites and mossy Li. To improve the cycle performance of LMBs, many approaches have been developed in recent years to promote dendrite-free and dense Li electrodeposition, such as electrolyte engineering (for liquid cells), Li anode surface modification, three-dimensional current collector design, and using solid-state electrolytes. In addition to these heavily researched chemical-based approaches, applying external pressure to LMBs can also strongly impact the morphology of the electrochemically deposited Li particles due to the malleable nature of metallic Li and has been shown to improve the cycle performance. However, the relationship between the applied pressure, morphological evolution of the Li anode and the cycle performance has not been fully understood, especially in coin cells, which are widely used for LMB research. Here we report a custom-designed pressure applying/measurement device based on thin-film pressure sensors to realize real-time tracking of the pressure evolution in LMB coin cells. Our results show that moderate pressure is conducive to dense Li deposition and increases the cycle life, whereas excessive pressure causes Li inward-growth and the deformation of Li anode, which will impare the electrochemical performance of LMBs. Although these observations are made in coin cells, they could have important implications for pouch cells and solid-state batteries, both of which are commonly tested under pressure. The cycle performance of LMBs is significantly improved in both coin cells (under actual relevant conditions) and large pouch cells. A 5 Ah pouch-type LMB with a high energy density exceeding 380 Wh∙kg⁻¹ could achieve stable cycling over 50 cycles under a stack pressure of ~1.2 MPa. It was also confirmed that the cell holders or clamps commonly used for coin cells can only exert a small amount of pressure, which is unlikely to exaggerate the cycle performance of the LMB coin cells. However, we do suggest that the electrochemical performance of LMBs should be reported along with the information on the applied pressure. This research practice will improve the consistency and quality of the reported data in the LMB research community and help unite the efforts to further improve the high energy density LMBs.
- High energy-density battery,
- In situ pressure measurement,
- Lithium metal anode,
- Electrodeposition,
- Pressure control
1. [1]
  Albertus, P.; Babinec, S.; Litzelman, S.; Newman, A. Nat. Energy 2018, 3, 16. doi: 10.1038/s41560-017-0047-2 doi: 10.1038/s41560-017-0047-2
2. [2]
  Zhang, J. -G.; Xu, W.; Henderson, W. A. Lithium Metal Anodes and Rechargeable Lithium Metal Batteries, 2nd ed.; Springer International Publishing: Switzerland, 2017; Vol. 249.
3. [3]
  Lin, D.; Liu, Y.; Cui, Y. Nat. Nanotechnol. 2017, 12, 194. doi: 10.1038/nnano.2017.16 doi: 10.1038/nnano.2017.16
4. [4]
  Kushima, A.; So, K. P.; Su, C.; Bai, P.; Kuriyama, N.; Maebashi, T.; Fujiwara, Y.; Bazant, M. Z.; Li, J. Nano Energy 2017, 32, 271. doi: 10.1016/j.nanoen.2016.12.001 doi: 10.1016/j.nanoen.2016.12.001
5. [5]
  Bai, P.; Li, J.; Brushett, F. R.; Bazant, M. Z. Energy Environ. Sci. 2016, 9, 3221. doi: 10.1039/C6EE01674J doi: 10.1039/C6EE01674J
6. [6]
  Cheng, X. -B.; Zhang, R.; Zhao, C. -Z.; Zhang, Q. Chem. Rev. 2017, 117, 10403. doi: 10.1021/acs.chemrev.7b00115 doi: 10.1021/acs.chemrev.7b00115
7. [7]
  Hwang, J. -Y.; Park, S. -J.; Yoon, C. S.; Sun, Y. -K. Energy Environ. Sci. 2019, 12, 2174. doi: 10.1039/C9EE00716D doi: 10.1039/C9EE00716D
8. [8]
  Fang, C.; Li, J.; Zhang, M.; Zhang, Y.; Yang, F.; Lee, J. Z.; Lee, M. H.; Alvarado, J.; Schroeder, M. A.; Yang, Y.; et al. Nature 2019, 572, 511. doi: 10.1038/s41586-019-1481-z doi: 10.1038/s41586-019-1481-z
9. [9]
  Boyle, D. T.; Huang, W.; Wang, H.; Li, Y.; Chen, H.; Yu, Z.; Zhang, W.; Bao, Z.; Cui, Y. Nat. Energy 2021, 6, 487. doi: 10.1038/s41560-021-00787-9 doi: 10.1038/s41560-021-00787-9
10. [10]
  Yan, C.; Yao, Y. X.; Chen, X.; Cheng, X. B.; Zhang, X. Q.; Huang, J. Q.; Zhang, Q. Angew. Chem. Int. Ed. 2018, 57, 14055. doi: 10.1002/anie.201807034 doi: 10.1002/anie.201807034
11. [11]
  Zhang, X. -Q.; Cheng, X. -B.; Chen, X.; Yan, C.; Zhang, Q. Adv. Funct. Mater. 2017, 27, 1605989. doi: 10.1002/adfm.201605989 doi: 10.1002/adfm.201605989
12. [12]
  Ren, X.; Zhang, Y.; Engelhard, M. H.; Li, Q.; Zhang, J. -G.; Xu, W. ACS Energy Lett. 2018, 3, 14. doi: 10.1021/acsenergylett.7b00982 doi: 10.1021/acsenergylett.7b00982
13. [13]
  Chen, S.; Zheng, J.; Mei, D.; Han, K. S.; Engelhard, M. H.; Zhao, W.; Xu, W.; Liu, J.; Zhang, J. -G. Adv. Mater. 2018, 30, 1706102. doi: 10.1002/adma.201706102 doi: 10.1002/adma.201706102
14. [14]
  Li, N. -W.; Shi, Y.; Yin, Y. -X.; Zeng, X. -X.; Li, J. -Y.; Li, C. -J.; Wan, L. -J.; Wen, R.; Guo, Y. -G. Angew. Chem. Int. Ed. 2018, 57, 1505. doi: 10.1002/anie.201710806 doi: 10.1002/anie.201710806
15. [15]
  Kim, M. S.; Ryu, J. -H.; Deepika; Lim, Y. R.; Nah, I. W.; Lee, K. -R.; Archer, L. A.; Il Cho, W. Nat. Energy 2018, 3, 889. doi: 10.1038/s41560-018-0237-6 doi: 10.1038/s41560-018-0237-6
16. [16]
  Li, N. -W.; Yin, Y. -X.; Yang, C. -P.; Guo, Y. -G. Adv. Mater. 2016, 28, 1853. doi: 10.1002/adma.201504526 doi: 10.1002/adma.201504526
17. [17]
  Gao, Y.; Yan, Z.; Gray, J. L.; He, X.; Wang, D.; Chen, T.; Huang, Q.; Li, Y. C.; Wang, H.; Kim, S. H.; et al. Nat. Mater. 2019, 18, 384. doi: 10.1038/s41563-019-0305-8 doi: 10.1038/s41563-019-0305-8
18. [18]
  Yu, Z.; Mackanic, D. G.; Michaels, W.; Lee, M.; Pei, A.; Feng, D.; Zhang, Q.; Tsao, Y.; Amanchukwu, C. V.; Yan, X.; et al. Joule 2019, 3, 2761. doi: 10.1016/j.joule.2019.07.025 doi: 10.1016/j.joule.2019.07.025
19. [19]
  Lin, D.; Liu, Y.; Liang, Z.; Lee, H. -W.; Sun, J.; Wang, H.; Yan, K.; Xie, J.; Cui, Y. Nat. Nanotechnol. 2016, 11, 626. doi: 10.1038/nnano.2016.32 doi: 10.1038/nnano.2016.32
20. [20]
  Lin, D.; Liu, Y.; Chen, W.; Zhou, G.; Liu, K.; Dunn, B.; Cui, Y. Nano Lett. 2017, 17, 3731. doi: 10.1021/acs.nanolett.7b01020 doi: 10.1021/acs.nanolett.7b01020
21. [21]
  Li, J.; Ma, C.; Chi, M.; Liang, C.; Dudney, N. J. Adv. Energy Mater. 2015, 5, 1401408. doi: 10.1002/aenm.201401408 doi: 10.1002/aenm.201401408
22. [22]
  Lee, Y. -G.; Fujiki, S.; Jung, C.; Suzuki, N.; Yashiro, N.; Omoda, R.; Ko, D. -S.; Shiratsuchi, T.; Sugimoto, T.; Ryu, S.; et al. Nat. Energy 2020, 5, 299. doi: 10.1038/s41560-020-0575-z doi: 10.1038/s41560-020-0575-z
23. [23]
  Hu, C.; Shen, Y.; Shen, M.; Liu, X.; Chen, H.; Liu, C.; Kang, T.; Jin, F.; Li, L.; Li, J.; et al. J. Am. Chem. Soc. 2020, 142, 18035. doi: 10.1021/jacs.0c07060 doi: 10.1021/jacs.0c07060
24. [24]
  Wilkinson, D. P.; Blom, H.; Brandt, K.; Wainwright, D. J. Power Sources 1991, 36, 517. doi: 10.1016/0378-7753(91)80077-B doi: 10.1016/0378-7753(91)80077-B
25. [25]
  Yin, X.; Tang, W.; Jung, I. D.; Phua, K. C.; Adams, S.; Lee, S. W.; Zheng, G. W. Nano Energy 2018, 50, 659. doi: 10.1016/j.nanoen.2018.06.003 doi: 10.1016/j.nanoen.2018.06.003
26. [26]
  Louli, A. J.; Genovese, M.; Weber, R.; Hames, S. G.; Logan, E. R.; Dahn, J. R. J. Electrochem. Soc. 2019, 166, A1291. doi: 10.1149/2.0091908jes doi: 10.1149/2.0091908jes
27. [27]
  Niu, C.; Lee, H.; Chen, S.; Li, Q.; Du, J.; Xu, W.; Zhang, J. G.; Whittingham, M. S.; Xiao, J.; Liu, J. Nat. Energy 2019, 4, 551. doi: 10.1038/s41560-019-0390-6 doi: 10.1038/s41560-019-0390-6
28. [28]
  Kanamori, S.; Matsumoto, M.; Taminato, S.; Mori, D.; Takeda, Y.; Imanishi, N.; Hah, H. J.; Takeuchi, T. RSC Adv. 2020, 10, 17805. doi: 10.1039/d0ra02788j doi: 10.1039/d0ra02788j
29. [29]
  Doux, J. M.; Nguyen, H.; Tan, D. H. S.; Banerjee, A.; Wang, X.; Wu, E. A.; Jo, C.; Yang, H.; Meng, Y. S. Adv. Energy Mater. 2020, 10. doi: 10.1002/aenm.201903253 doi: 10.1002/aenm.201903253
30. [30]
  Liu, J.; Bao, Z.; Cui, Y.; Dufek, E. J.; Goodenough, J. B.; Khalifah, P.; Li, Q.; Liaw, B. Y.; Liu, P.; Manthiram, A. , et al. Nat. Energy 2019, 4, 180. doi: 10.1038/s41560-019-0338-x doi: 10.1038/s41560-019-0338-x
31. [31]
  Zhang, C.; Liu, Y.; Jiao, X.; Xiong, S.; Song, J. J. Electrochem. Soc. 2019, 166, A3675. doi: 10.1149/2.0581915jes doi: 10.1149/2.0581915jes
32. [32]
  Zhu, Y.; Pande, V.; Li, L.; Wen, B.; Pan, M. S.; Wang, D.; Ma, Z. -F.; Viswanathan, V.; Chiang, Y. -M. Proc. Natl. Acad. Sci. U. S. A. 2020, 117, 27195. doi: 10.1073/pnas.2001923117 doi: 10.1073/pnas.2001923117
33. [33]
  Xu, C.; Ahmad, Z.; Aryanfar, A.; Viswanathan, V.; Greer, J. R. Proc. Natl. Acad. Sci. U. S. A. 2017, 114, 57. doi: 10.1073/pnas.1615733114 doi: 10.1073/pnas.1615733114
1. [1]
  Junhan Luo , Qi Qing , Liqin Huang , Zhe Wang , Shuang Liu , Jing Chen , Yuexiang Lu . Non-contact gaseous microplasma electrode as anode for electrodeposition of metal and metal alloy in molten salt. Chinese Chemical Letters, 2024, 35(4): 108483-. doi: 10.1016/j.cclet.2023.108483
2. [2]
  Yun Wei , Lei Zhou , Wenbin Hu , Liming Yang , Guang Yang , Chaoqiang Wang , Hui Shi , Fei Han , Yufa Feng , Xuan Ding , Penghui Shao , Xubiao Luo . Recovery of cathode copper and ternary precursors from CuS slag derived by waste lithium-ion batteries: Process analysis and evaluation. Chinese Chemical Letters, 2024, 35(7): 109172-. doi: 10.1016/j.cclet.2023.109172
3. [3]
  Jiayuan Liang , Xin Mi , Songhao Guo , Hui Luo , Kejun Bu , Tonghuan Fu , Menglin Duan , Yang Wang , Qingyang Hu , Rengen Xiong , Peng Qin , Fuqiang Huang , Xujie Lü . Pressure-induced emission in 0D metal halide (EATMP)SbBr5 by regulating exciton-phonon coupling. Chinese Journal of Structural Chemistry, 2024, 43(7): 100333-100333. doi: 10.1016/j.cjsc.2024.100333
4. [4]
  Haixia Wu , Kailu Guo . Iodized polyacrylonitrile as fast-charging anode for lithium-ion battery. Chinese Chemical Letters, 2024, 35(10): 109550-. doi: 10.1016/j.cclet.2024.109550
5. [5]
  Huan Hu , Ying Zhang , Shi-Shuang Huang , Zhi-Gang Li , Yungui Liu , Rui Feng , Wei Li . Temperature- and pressure-responsive photoluminescence in a 1D hybrid lead halide. Chinese Journal of Structural Chemistry, 2024, 43(10): 100395-100395. doi: 10.1016/j.cjsc.2024.100395
6. [6]
  Jiale Zheng , Mei Chen , Huadong Yuan , Jianmin Luo , Yao Wang , Jianwei Nai , Xinyong Tao , Yujing Liu . Electron-microscopical visualization on the interfacial and crystallographic structures of lithium metal anode. Chinese Chemical Letters, 2024, 35(6): 108812-. doi: 10.1016/j.cclet.2023.108812
7. [7]
  Yue Qian , Zhoujia Liu , Haixin Song , Ruize Yin , Hanni Yang , Siyang Li , Weiwei Xiong , Saisai Yuan , Junhao Zhang , Huan Pang . Imide-based covalent organic framework with excellent cyclability as an anode material for lithium-ion battery. Chinese Chemical Letters, 2024, 35(6): 108785-. doi: 10.1016/j.cclet.2023.108785
8. [8]
  Hengying Xiang , Nanping Deng , Lu Gao , Wen Yu , Bowen Cheng , Weimin Kang . 3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery. Chinese Chemical Letters, 2024, 35(8): 109182-. doi: 10.1016/j.cclet.2023.109182
9. [9]
  Zhe Wang , Li-Peng Hou , Qian-Kui Zhang , Nan Yao , Aibing Chen , Jia-Qi Huang , Xue-Qiang Zhang . High-performance localized high-concentration electrolytes by diluent design for long-cycling lithium metal batteries. Chinese Chemical Letters, 2024, 35(4): 108570-. doi: 10.1016/j.cclet.2023.108570
10. [10]
  Yunfei Shen , Long Chen . Gradient imprinted Zn metal anodes assist dendrites-free at high current density/capacity. Chinese Journal of Structural Chemistry, 2024, 43(10): 100321-100321. doi: 10.1016/j.cjsc.2024.100321
11. [11]
  Shuo Zhang , Haitao Liao , Zhi-Qun Liu , Chong Yan , Jia-Qi Huang . Re-evaluating the nano-sized inorganic protective layer on Cu current collector for anode free lithium metal batteries. Chinese Chemical Letters, 2024, 35(7): 109284-. doi: 10.1016/j.cclet.2023.109284
12. [12]
  Ting Hu , Yuxuan Guo , Yixuan Meng , Ze Zhang , Ji Yu , Jianxin Cai , Zhenyu Yang . Uniform lithium deposition induced by copper phthalocyanine additive for durable lithium anode in lithium-sulfur batteries. Chinese Chemical Letters, 2024, 35(5): 108603-. doi: 10.1016/j.cclet.2023.108603
13. [13]
  Benjian Xin , Rui Wang , Lili Liu , Zhiqiang Niu . Metal-organic framework derived MnO@C/CNTs composite for high-rate lithium-based semi-solid flow batteries. Chinese Journal of Structural Chemistry, 2023, 42(11): 100116-100116. doi: 10.1016/j.cjsc.2023.100116
14. [14]
  Zhao Li , Huimin Yang , Wenjing Cheng , Lin Tian . Recent progress of in situ/operando characterization techniques for electrocatalytic energy conversion reaction. Chinese Chemical Letters, 2024, 35(9): 109237-. doi: 10.1016/j.cclet.2023.109237
15. [15]
  Mengwen Wang , Qintao Sun , Yue Liu , Zhengan Yan , Qiyu Xu , Yuchen Wu , Tao Cheng . Impact of lithium nitrate additives on the solid electrolyte interphase in lithium metal batteries. Chinese Journal of Structural Chemistry, 2024, 43(2): 100203-100203. doi: 10.1016/j.cjsc.2023.100203
16. [16]
  Tao Wei , Jiahao Lu , Pan Zhang , Qi Zhang , Guang Yang , Ruizhi Yang , Daifen Chen , Qian Wang , Yongfu Tang . An intermittent lithium deposition model based on bimetallic MOFs derivatives for dendrite-free lithium anode with ultrahigh areal capacity. Chinese Chemical Letters, 2024, 35(8): 109122-. doi: 10.1016/j.cclet.2023.109122
17. [17]
  Li Lin , Song-Lin Tian , Zhen-Yu Hu , Yu Zhang , Li-Min Chang , Jia-Jun Wang , Wan-Qiang Liu , Qing-Shuang Wang , Fang Wang . Molecular crowding electrolytes for stabilizing Zn metal anode in rechargeable aqueous batteries. Chinese Chemical Letters, 2024, 35(7): 109802-. doi: 10.1016/j.cclet.2024.109802
18. [18]
  Haiying Lu , Weijie Li . The electrolyte solvation and interfacial chemistry for anode-free sodium metal batteries. Chinese Journal of Structural Chemistry, 2024, 43(11): 100334-100334. doi: 10.1016/j.cjsc.2024.100334
19. [19]
  Xin-Tong Zhao , Jin-Zhi Guo , Wen-Liang Li , Jing-Ping Zhang , Xing-Long Wu . Two-dimensional conjugated coordination polymer monolayer as anode material for lithium-ion batteries: A DFT study. Chinese Chemical Letters, 2024, 35(6): 108715-. doi: 10.1016/j.cclet.2023.108715
20. [20]
  Peng Jia , Yunna Guo , Dongliang Chen , Xuedong Zhang , Jingming Yao , Jianguo Lu , Liqiang Zhang . In-situ imaging electrocatalysis in a solid-state Li-O₂ battery with CuSe nanosheets as air cathode. Chinese Chemical Letters, 2024, 35(5): 108624-. doi: 10.1016/j.cclet.2023.108624

Get Citation

PDF

XML

Metrics

PDF Downloads(0)
Abstract views(514)
HTML views(96)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142