Citation: Liu Ya, Zheng Lei, Gu Wei, Shen Yanbin, Chen Liwei. Surface Passivation of Lithium Metal via In situ Polymerization[J]. Acta Physico-Chimica Sinica, ;2021, 37(1): 200405. doi: 10.3866/PKU.WHXB202004058 shu

Surface Passivation of Lithium Metal via In situ Polymerization

Liu Ya ^1,2 ,
Zheng Lei ^2,3 ,
Gu Wei ^2,4 ,
Shen Yanbin ^2,, ,
Chen Liwei ^2,5,,

1.
Nano Science and Technology Institute, University of Science and Technology of China, Suzhou 215123, Jiangsu Province, China
2.
i-Lab, CAS Center for Excellence in Nanoscience, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, Jiangsu Province, China
3.
School of Nano Technology and Nano Bionics, University of Science and Technology of China, Hefei 230026, China
4.
School of Physical Science and Technology, Shanghai Tech University, Shanghai 201210, China
5.
School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Corresponding author: Shen Yanbin, ybshen2017@sinano.ac.cn Chen Liwei, lwchen2008@sinano.ac.cn
Received Date: 21 April 2020
Revised Date: 14 May 2020
Accepted Date: 14 May 2020
Available Online: 20 May 2020
Fund Project: the National Natural Science Foundation of China 21733012the Ministry of Science and Technology of China 2016YFB0100102The project was supported by the National Natural Science Foundation of China (21625304, 21733012, and 21772190) and the Ministry of Science and Technology of China (2016YFB0100102)the National Natural Science Foundation of China 21772190the National Natural Science Foundation of China 21625304

Lithium (Li) metal is considered a promising anode material for high energy density secondary Li metal batteries because it has the highest specific energy (3860 mAh·g^-1) and lowest redox potential (-3.04 V compared to standard hydrogen electrodes. However, the development of high-performance Li metal batteries is challenging. Firstly, Li dendrites tend to grow on the surface of Li metal foil, leading to a limited anodic coulombic efficiency (CE), poor cyclability, and even explosion hazards when an internal cell short circuit occurs. Moreover, Li metal suffers from serious surface stability problems and is easily corroded by electrolytes during cycling, further resulting in low CE, thus shortening the life cycle. We have developed a Li-carbon nanotube (Li-CNT) composite microsphere via a facile molten impregnation method. The Li-CNT composite's CNT framework can suppress volume changes during the charge/discharge process and help stabilize the solid electrolyte interphase (SEI), which is typically mechanically fragile. As a result, Li-CNT shows a high specific capacity (2000 mAh·g^-1) and can significantly suppress dendrite formation by reducing the current density, resulting in enhanced safety and cycling stability. However, the large specific surface area of the Li-CNT microspheres also enables increased reaction with the air and the electrolyte. A passivation layer is critical for the practical application of Li-CNT during the electrochemical cycling and manufacturing process. LiF is an important component of SEI in the liquid electrolyte system, and a uniform and dense LiF-rich SEI film can enable stable cycling. Moreover, LiF has been widely used as the preferred coating material to protect Li metal anodes through different methods. In this study, we improved the Li-CNT composite stability by constructing a uniform LiF-rich protecting layer on the surface through in situ polymerization of 4-fluorostyrene. The F functional group of 4-fluorostyrene, which is a lithiophilic group, reacts with the Li-CNT to produce a uniform LiF-rich layer on the surface of the Li-CNT via a facile and scalable liquid-phase reaction. The resulting passivation layer effectively suppresses the Li-CNT corrosion by the electrolyte and air, leading to better environmental and electrochemical stability. Consequently, after exposure to dry-air with a dew point -40 ℃ for 24 h, the specific capacity of the surface passivated Li-CNT is still as high as 1129 mAh·g^-1, corresponding to a capacity retention of 52.85%. When the surface passivated Li-CNT is paired with a LiFePO₄ cathode (the capacity ratio of cathode and anode is 1 : 6), a prolonged lifespan of over 280 cycles at 0.5C was reached, corresponding to a CE of 97.7%. The in situ polymerization passivation is simple and easy to be scale up; thus, it is a promising method for developing Li metal anodes towards the practical Li metal batteries.
- Li-carbon nanotube,
- Li metal battery,
- LiF,
- In situ polymerization,
- Li dendrite
1. [1]
  Tarascon, J. M.; Armand, M. Nature 2001, 414 (6861), 359. doi: 10.1038/35104644 doi: 10.1038/35104644
2. [2]
  Goodenough, J. B.; Park, K. S. J. Am. Chem. Soc.2013, 135 (4), 1167. doi: 10.1021/ja3091438 doi: 10.1021/ja3091438
3. [3]
  Bruce, P. G.; Freunberger, S. A.; Hardwick, L. J.; Tarascon, J. M. Nat. Mater.2012, 11 (1), 19. doi: 10.1038/nmat3191 doi: 10.1038/nmat3191
4. [4]
  Larcher, D.; Tarascon, J. M. Nat. Chem.2015, 7 (1), 19. doi: 10.1038/nchem.2085v doi: 10.1038/nchem.2085v
5. [5]
  Dunn, B.; Kamath, H.; Tarascon, J. M. Science 2011, 334 (6058), 928. doi: 10.1126/science.1212741 doi: 10.1126/science.1212741
6. [6]
  Albertus, P. Nat. Energy 2018, 3, 16. doi: 10.1038/s41560-017-0047-2 doi: 10.1038/s41560-017-0047-2
7. [7]
  Cao, Y.; Li, M.; Lu, J.; Amine, K. Nat. Nanotechnol.2019, 14 (3), 200. doi: 10.1038/s41565-019-0371-8 doi: 10.1038/s41565-019-0371-8
8. [8]
  Shen, Y.; Zhang, Y.; Han, S.; Wang, J.; Peng, Z.; Chen, L. Joule 2018, 2 (9), 1674. doi: 10.1016/j.joule.2018.06.021 doi: 10.1016/j.joule.2018.06.021
9. [9]
  Sawada, Y.; Dougherty, A.; Gollub, J. P. Phys. Rev. Lett.1986, 56 (12), 1260. doi: 10.1103/PhysRevLett.56.1260 doi: 10.1103/PhysRevLett.56.1260
10. [10]
  Cheng, X. B.; Zhang, R.; Zhao, C. Z.; Zhang, Q. Chem. Rev.2017, 117 (15), 10403. doi: 10.1021/acs.chemrev.7b00115 doi: 10.1021/acs.chemrev.7b00115
11. [11]
  Peled, E. J. Electrochem. Soc.1979, 126 (12), 2047. doi: 10.1149/1.2128859 doi: 10.1149/1.2128859
12. [12]
  Tikekar, M. D.; Choudhury, S.; Tu, Z. Y.; Archer, L. A. Nat. Energy 2016, 1, 1. doi: 10.1038/nenergy.2016.114 doi: 10.1038/nenergy.2016.114
13. [13]
  Chandrashekar, S.; Trease, N. M.; Chang, H. J.; Du, L. S.; Grey, C. P.; Jerschow, A. Nat. Mater.2012, 11 (4), 311. doi: 10.1038/nmat3246 doi: 10.1038/nmat3246
14. [14]
  Brissot, C.; Rosso, M.; Chazalviel, J. N.; Lascaud, S. J. Power Sources 1999, 81, 925. doi: 10.1016/s0378-7753(98)00242-0 doi: 10.1016/s0378-7753(98)00242-0
15. [15]
  Wandt, J.; Marino, C.; Gasteiger, H. A.; Jakes, P.; Eichel, R. A.; Granwehr, J. Energy Environ. Sci.2015, 8 (4), 1358. doi: 10.1039/c4ee02730b doi: 10.1039/c4ee02730b
16. [16]
  Lin, D. C.; Liu, Y. Y.; Cui, Y. Nat. Nanotechnol.2017, 12 (3), 194. doi: 10.1038/nnano.2017.16 doi: 10.1038/nnano.2017.16
17. [17]
  Wang, Y. L.; Shen, Y. B.; Du, Z. L.; Zhang, X. F.; Wang, K.; Zhang, H. Y.; Kang, T.; Guo, F.; Liu, C. H.; Wu, X. D.; Wei, L.; Chen, L. W. J. Mater. Chem. A 2017, 5 (45), 23434. doi: 10.1039/c7ta08531a doi: 10.1039/c7ta08531a
18. [18]
  Guo, F.; Wang, Y.; Kang, T.; Liu, C.; Shen, Y.; Lu, W.; Wu, X.; Chen, L. Energy Storage Mater.2018, 15, 116. doi: 10.1016/j.ensm.2018.03.018 doi: 10.1016/j.ensm.2018.03.018
19. [19]
  Zhang, X. Q.; Cheng, X. B.; Chen, X.; Yan, C.; Zhang, Q. Adv. Funct. Mater. 2017, 27 (10), 1605989. doi: 10.1002/adfm.201605989 doi: 10.1002/adfm.201605989
20. [20]
  Markevich, E.; Salitra, G.; Aurbach, D. ACS Energy Lett. 2017, 2 (6), 1337. doi: 10.1021/acsenergylett.7b00163 doi: 10.1021/acsenergylett.7b00163
21. [21]
  Li, W. Y.; Yao, H. B.; Yan, K.; Zheng, G. Y.; Liang, Z.; Chiang, Y. M.; Cui, Y. Nat. Commun. 2015, 6, 7436. doi: 10.1038/ncomms8436 doi: 10.1038/ncomms8436
22. [22]
  Liang, X.; Wen, Z. Y.; Liu, Y.; Wu, M. F.; Jin, J.; Zhang, H.; Wu, X. W. J. Power Sources 2011, 196 (22), 9839. doi: 10.1016/j.jpowsour.2011.08.027 doi: 10.1016/j.jpowsour.2011.08.027
23. [23]
  Xiong, S. Z.; Xie, K.; Diao, Y.; Hong, X. B. Electrochim. Acta 2012, 83, 78. doi: 10.1016/j.electacta.2012.07.118 doi: 10.1016/j.electacta.2012.07.118
24. [24]
  Ding, F.; Xu, W.; Graff, G. L.; Zhang, J.; Sushko, M. L.; Chen, X. L.; Shao, Y. Y.; Engelhard, M. H.; Nie, Z. M.; Xiao, J.; et al. J. Am. Chem. Soc.2013, 135 (11), 4450. doi: 10.1021/ja312241y doi: 10.1021/ja312241y
25. [25]
  Shiraishi, S.; Kanamura, K.; Takehara, Z. I. J. Appl. Electrochem. 1999, 29 (7), 869. doi: 10.1023/A:1003565229172 doi: 10.1023/A:1003565229172
26. [26]
  Zhao, J.; Liao, L.; Shi, F. F.; Lei, T.; Chen, G. X.; Pei, A.; Sun, J.; Yan, K.; Zhou, G. M.; Xie, J.; et al. J. Am. Chem. Soc. 2017, 139 (33), 11550. doi: 10.1021/jacs.7b05251 doi: 10.1021/jacs.7b05251
27. [27]
  Lin, D. C.; Liu, Y. Y.; Chen, W.; Zhou, G. M.; Liu, K.; Dunn, B.; Cui, Y. Nano Lett. 2017, 17 (6), 3731. doi: 10.1021/acs.nanolett.7b01020 doi: 10.1021/acs.nanolett.7b01020
28. [28]
  Chen, L.; Chen, K. S.; Chen, X. J.; Ramirez, G.; Huang, Z. N.; Geise, N. R.; Steinruck, H. G.; Fisher, B. L.; Shahbazian-Yassar, R.; Toney, M. F.; et al. ACS Appl. Mater. Interfaces 2018, 10 (32), 26972. doi: 10.1021/acsami.8b04573 doi: 10.1021/acsami.8b04573
29. [29]
  Zhang, Y. J.; Wang, W.; Tang, H.; Bai, W. Q.; Ge, X.; Wang, X. L.; Gu, C. D.; Tu, J. P. J. Power Sources 2015, 277, 304. doi: 10.1016/j.jpowsour.2014.12.023 doi: 10.1016/j.jpowsour.2014.12.023
30. [30]
  Li, Y.; Sun, Y.; Pei, A.; Chen, K.; Vailionis, A.; Li, Y.; Zheng, G.; Sun, J.; Cui, Y. ACS Central Sci. 2018, 4 (1), 97. doi: 10.1021/acscentsci.7b00480 doi: 10.1021/acscentsci.7b00480
31. [31]
  Park, K.; Goodenough, J. B. Adv. Energy Mater. 2017, 7 (19), 1700732. doi: 10.1002/aenm.201700732 doi: 10.1002/aenm.201700732
32. [32]
  Jing, H. K.; Kong, L. L.; Liu, S.; Li, G. R.; Gao, X. P. J. Mater. Chem. A 2015, 3 (23), 12213. doi: 10.1039/c5ta01490e doi: 10.1039/c5ta01490e
33. [33]
  Kazyak, E.; Wood, K. N.; Dasgupta, N. P. Chem. Mat. 2015, 27 (18), 6457. doi: 10.1021/acs.chemmater.5b02789 doi: 10.1021/acs.chemmater.5b02789
34. [34]
  Mannsfeld, S. C. B.; Tee, B. C. K.; Stoltenberg, R. M.; Chen, C.; Barman, S.; Muir, B. V. O.; Sokolov, A. N.; Reese, C.; Bao, Z. N. Nat. Mater. 2010, 9 (10), 859. doi: 10.1038/nmat2834 doi: 10.1038/nmat2834
35. [35]
  Zhu, B.; Jin, Y.; Hu, X. Z.; Zheng, Q. H.; Zhang, S.; Wang, Q. J.; Zhu, J. Adv. Mater. 2017, 29 (2), 1603755. doi: 10.1002/adma.201603755 doi: 10.1002/adma.201603755
36. [36]
  Lee, H.; Lee, D. J.; Kim, Y. J.; Park, J. K.; Kim, H. T. J. Power Sources 2015, 284, 103. doi: 10.1016/j.jpowsour.2015.03.004 doi: 10.1016/j.jpowsour.2015.03.004
37. [37]
  Kang, T.; Wang, Y.; Guo, F.; Liu, C.; Zhao, J.; Yang, J.; Lin, H.; Qiu, Y.; Shen, Y.; Lu, W.; Chen, L. ACS Central Sci. 2019, 5 (3), 468. doi: 10.1021/acscentsci.8b00845 doi: 10.1021/acscentsci.8b00845
38. [38]
  Zheng, L.; Guo, F.; Kang, T.; Yang, J.; Liu, Y.; Gu, W.; Zhao, Y. F.; Lin, H. Z.; Shen, Y. B.; Lu, W.; Chen, L. W. Nano Res.2019, 8. doi: 10.1007/s12274-019-2565-7 doi: 10.1007/s12274-019-2565-7
39. [39]
  Peled, E.; Tow, D. B.; Merson, A.; Gladkich, A.; Burstein, L.; Golodnitsky, D. J. Power Sources 2001, 97(8), 52. doi: 10.1016/s0378-7753(01)00505-5 doi: 10.1016/s0378-7753(01)00505-5
40. [40]
  Dedryvere, R.; Gireaud, L.; Grugeon, S.; Laruelle, S.; Tarascon, J. M.; Gonbeau, D. J. Phys. Chem. B 2005, 109 (33), 15868. doi: 10.1021/jp051626k doi: 10.1021/jp051626k
41. [41]
  Zhou, J. M.; Li, H. Y.; Lin, G. D.; Zhang, H. B. Acta Phys. -Chim. Sin. 2010, 26 (11), 3080. doi: 10.3866/PKU.WHXB20101108
42. [42]
  Beamson, G.; Briggs, D. High Resolution XPS of Organic Polymers The Scienta ESCA300 Database; Wiley: Chichester 1992; pp. 72.
43. [43]
  Ma, Q.; Zeng, X. X.; Yue, J.; Yin, Y. X.; Zuo, T. T.; Liang, J. Y.; Deng, Q.; Wu, X. W.; Guo, Y. G. Adv. Energy Mater. 2019, 9, 1803854. doi: 10.1002/aenm.201803854 doi: 10.1002/aenm.201803854
44. [44]
  Zuo, T. T.; Shi, Y.; Wu, X. W.; Wang, P. F.; Wang, S. H.; Yin, Y. X.; Wang, W. P.; Ma, Q.; Zeng, X. X.; Ye, H.; et al. ACS Appl. Mater. Interfaces 2018, 10, 30065. doi: 10.1021/acsami.8b12986 doi: 10.1021/acsami.8b12986
45. [45]
  Zhuang, G. R.; Chen, Y. F.; Ross, P. N. Langmuir 1999, 15 (4), 1470. doi: 10.1021/la980454y doi: 10.1021/la980454y
46. [46]
  Zhao, J.; Lu, Z.; Wang, H.; Liu, W.; Lee, H. W.; Yan, K.; Zhuo, D.; Lin, D.; Liu, N.; Cui, Y. J. Am. Chem. Soc. 2015, 137, 8372. doi: 10.1021/jacs.5b04526 doi: 10.1021/jacs.5b04526
1. [1]
  Yifeng Xu , Jiquan Liu , Bin Cui , Yan Li , Gang Xie , Ying Yang . “Xiao Li’s School Adventures: The Working Principles and Safety Risks of Lithium-ion Batteries”. University Chemistry, 2024, 39(9): 259-265. doi: 10.12461/PKU.DXHX202404009
2. [2]
  Haihua Yang , Minjie Zhou , Binhong He , Wenyuan Xu , Bing Chen , Enxiang Liang . Synthesis and Electrocatalytic Performance of Iron Phosphide@Carbon Nanotubes as Cathode Material for Zinc-Air Battery: a Comprehensive Undergraduate Chemical Experiment. University Chemistry, 2024, 39(10): 426-432. doi: 10.12461/PKU.DXHX202405100
3. [3]
  Xiufang Wang , Donglin Zhao , Kehua Zhang , Xiaojie Song . “Preparation of Carbon Nanotube/SnS₂ Photoanode Materials”: A Comprehensive University Chemistry Experiment. University Chemistry, 2024, 39(4): 157-162. doi: 10.3866/PKU.DXHX202308025
4. [4]
  Hailang JIA , Hongcheng LI , Pengcheng JI , Yang TENG , Mingyun GUAN . Preparation and performance of N-doped carbon nanotubes composite Co₃O₄ as oxygen reduction reaction electrocatalysts. Chinese Journal of Inorganic Chemistry, 2024, 40(4): 693-700. doi: 10.11862/CJIC.20230402
5. [5]
  Qiuyang LUO , Xiaoning TANG , Shu XIA , Junnan LIU , Xingfu YANG , Jie LEI . Application of a densely hydrophobic copper metal layer in-situ prepared with organic solvents for protecting zinc anodes. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1243-1253. doi: 10.11862/CJIC.20240110
6. [6]
  Junli Liu . Practice and Exploration of Research-Oriented Classroom Teaching in the Integration of Science and Education: a Case Study on the Synthesis of Sub-Nanometer Metal Oxide Materials and Their Application in Battery Energy Storage. University Chemistry, 2024, 39(10): 249-254. doi: 10.12461/PKU.DXHX202404023
7. [7]
  Bao Jia , Yunzhe Ke , Shiyue Sun , Dongxue Yu , Ying Liu , Shuaishuai Ding . Innovative Experimental Teaching for the Preparation and Modification of Conductive Organic Polymer Thin Films in Undergraduate Courses. University Chemistry, 2024, 39(10): 271-282. doi: 10.12461/PKU.DXHX202404121
8. [8]
  Junke LIU , Kungui ZHENG , Wenjing SUN , Gaoyang BAI , Guodong BAI , Zuwei YIN , Yao ZHOU , Juntao LI . Preparation of modified high-nickel layered cathode with LiAlO₂/cyclopolyacrylonitrile dual-functional coating. Chinese Journal of Inorganic Chemistry, 2024, 40(8): 1461-1473. doi: 10.11862/CJIC.20240189
9. [9]
  Junjie Zhang , Yue Wang , Qiuhan Wu , Ruquan Shen , Han Liu , Xinhua Duan . Preparation and Selective Separation of Lightweight Magnetic Molecularly Imprinted Polymers for Trace Tetracycline Detection in Milk. University Chemistry, 2024, 39(5): 251-257. doi: 10.3866/PKU.DXHX202311084
10. [10]
  Yinyin Qian , Rui Xu . Utilizing VESTA Software in the Context of Material Chemistry: Analyzing Twin Crystal Nanostructures in Indium Antimonide. University Chemistry, 2024, 39(3): 103-107. doi: 10.3866/PKU.DXHX202307051
11. [11]
  You Wu , Chang Cheng , Kezhen Qi , Bei Cheng , Jianjun Zhang , Jiaguo Yu , Liuyang Zhang . ZnO/D-A共轭聚合物S型异质结高效光催化产H₂O₂及其电荷转移动力学研究. Acta Physico-Chimica Sinica, 2024, 40(11): 2406027-. doi: 10.3866/PKU.WHXB202406027
12. [12]
  Endong YANG , Haoze TIAN , Ke ZHANG , Yongbing LOU . Efficient oxygen evolution reaction of CuCo₂O₄/NiFe-layered bimetallic hydroxide core-shell nanoflower sphere arrays. Chinese Journal of Inorganic Chemistry, 2024, 40(5): 930-940. doi: 10.11862/CJIC.20230369
13. [13]
  Wen YANG , Didi WANG , Ziyi HUANG , Yaping ZHOU , Yanyan FENG . La promoted hydrotalcite derived Ni-based catalysts: In situ preparation and CO₂ methanation performance. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 561-570. doi: 10.11862/CJIC.20230276
14. [14]
  Jiajia Li , Xiangyu Zhang , Zhihan Yuan , Zhengyang Qian , Jian Zhu . 3D Printing Based on Photo-Induced Reversible Addition-Fragmentation Chain Transfer Polymerization. University Chemistry, 2024, 39(5): 11-19. doi: 10.3866/PKU.DXHX202309073
15. [15]
  Zijian Zhao , Yanxin Shi , Shicheng Li , Wenhong Ruan , Fang Zhu , Jijun Jiang . A New Exploration of the Preparation of Polyacrylic Acid by Free Radical Polymerization Based on the Concept of Green Chemistry. University Chemistry, 2024, 39(5): 315-324. doi: 10.3866/PKU.DXHX202311094
16. [16]
  Jianyu Qin , Yuejiao An , Yanfeng Zhang . In Situ Assembled ZnWO₄/g-C₃N₄ S-Scheme Heterojunction with Nitrogen Defect for CO₂ Photoreduction. Acta Physico-Chimica Sinica, 2024, 40(12): 2408002-. doi: 10.3866/PKU.WHXB202408002
17. [17]
  Guimin ZHANG , Wenjuan MA , Wenqiang DING , Zhengyi FU . Synthesis and catalytic properties of hollow AgPd bimetallic nanospheres. Chinese Journal of Inorganic Chemistry, 2024, 40(5): 963-971. doi: 10.11862/CJIC.20230293
18. [18]
  Qi Li , Pingan Li , Zetong Liu , Jiahui Zhang , Hao Zhang , Weilai Yu , Xianluo Hu . Fabricating Micro/Nanostructured Separators and Electrode Materials by Coaxial Electrospinning for Lithium-Ion Batteries: From Fundamentals to Applications. Acta Physico-Chimica Sinica, 2024, 40(10): 2311030-. doi: 10.3866/PKU.WHXB202311030
19. [19]
  Ping ZHANG , Chenchen ZHAO , Xiaoyun CUI , Bing XIE , Yihan LIU , Haiyu LIN , Jiale ZHANG , Yu'nan CHEN . Preparation and adsorption-photocatalytic performance of ZnAl@layered double oxides. Chinese Journal of Inorganic Chemistry, 2024, 40(10): 1965-1974. doi: 10.11862/CJIC.20240014
20. [20]
  Tianyun Chen , Ruilin Xiao , Xinsheng Gu , Yunyi Shao , Qiujun Lu . Synthesis, Crystal Structure, and Mechanoluminescence Properties of Lanthanide-Based Organometallic Complexes. University Chemistry, 2024, 39(5): 363-370. doi: 10.3866/PKU.DXHX202312017

Get Citation

PDF

XML

Metrics

PDF Downloads(26)
Abstract views(1224)
HTML views(201)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142