Citation: WANG Qin, XUE Minmin, ZHANG Zhuhua. Chemical Synthesis of Borophene: Progress and Prospective[J]. Acta Physico-Chimica Sinica, ;2019, 35(6): 565-571. doi: 10.3866/PKU.WHXB201805080 shu

Chemical Synthesis of Borophene: Progress and Prospective

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P. R. China

Corresponding author: ZHANG Zhuhua, chuwazhang@nuaa.edu.cn
Received Date: 28 May 2018
Revised Date: 30 June 2018
Accepted Date: 1 July 2018
Available Online: 6 June 2018
Fund Project: The project was supported by the Fundamental Research Funds for the Central Universities, China NE2018002The project was supported by the Fundamental Research Funds for the Central Universities, China (NE2018002)

Borophene, a boron analogue of graphene, exhibits a rich variety of chemical and physical properties. Here, we provide an intensive overview of recent progress in theoretical modeling and experimental synthesis of borophene. In particular, we analyze the influence of substrate, growth temperature, and precursor on the selectivity of boron nucleation. While three-dimensional (3D) bulk boron is more stable than a two-dimensional (2D) boron sheet, the nucleation barrier determined by the growth process controls the formation of the material and it depends on the specific growth environment. Theoretical studies have shown that a metal substrate can play an important role in stabilizing 2D boron clusters over their 3D form, resulting in the kinetically favored growth of 2D boron on the substrate even though the 2D boron clusters will be overwhelmingly less stable than the 3D form with increasing cluster size. Ag and Cu substrates have proven to be particularly suitable for achieving this preference. Guided by theoretical works and perhaps original insights, experimentalists from two independent groups have successfully synthesized 2D boron sheets on silver substrates by depositing ultra-high purity boron onto a clean Ag (111) surface under high vacuum conditions. Moreover, the borophene samples were found to exhibit the same atomic structure previously predicted to be preferred on this substrate. Besides the substrate, the growth temperature is also key to the final product. When the temperature is too low, boron growth cannot overcome the nucleation barrier of the 2D structure. As a result, boron clusters or amorphous boron structures are likely to be formed. In contrast, an excessively high growth temperature will steer the growth to overcome the nucleation barrier of 3D boron, possibly yielding boron nanofilms with finite thickness. Therefore, the growth temperature needs to be carefully controlled, so that the free energy of boron growth will be located between the nucleation barriers of the 3D and 2D forms. Some impurity elements found in synthetic source materials, such as hydrogen and oxygen, can also impact boron nucleation. The existence of these elements may alter the competition between 2D and 3D structures during the nucleation process. More importantly, hydrogen and oxygen can passivate the dangling bonds on the surface of a 3D boron structure, lowering its surface energy, and therefore, impairing the nucleation of 2D boron structures. At present, molecular beam epitaxy (MBE) is the only method with which borophene has been successfully synthesized. Yet this method is very expensive, suffers from low yield, and is constrained to small sample sizes. Thus, exploring the growth of borophene via chemical vapor deposition (CVD) on different substrates is critically important for realizing the great potential of borophene in various applications. By discussing possible growth conditions and atomistic mechanisms of borophene nucleation as well as theoretical methods for modeling and simulations, we suggest prospects for chemical vapor deposition growth of borophene on selected substrates. This work aims to offer useful guidance for chemical synthesis of large-area, high-quality borophenes and promote their practical applications.
- Borophene,
- Chemical vapor deposition,
- Materials synthesis,
- Theoretical modeling,
- Substrate,
- Nucleation
1. [1]
  Mannix, A. J.; Kiraly, B.; Hersam, M. C.; Guisinger, N. P. Nat. Rev. Chem. 2017, 1, 0014. doi: 10.1038/s41570-016-0014 doi: 10.1038/s41570-016-0014
2. [2]
  Molle, A.; Goldberger, J.; Houssa, M.; Xu, Y.; Zhang, S. C.; Akinwande, D. Nat. Mater. 2017, 16, 163. doi: 10.1038/NMAT4802 doi: 10.1038/NMAT4802
3. [3]
  Oganov, A. R.; Solozhenko, V. L. J. Superhard Mater. 2009, 31, 285. doi: 10.3103/S1063457609050013 doi: 10.3103/S1063457609050013
4. [4]
  Huang, W.; Sergeeva, A. P.; Zhai, H. J.; Averkiev, B. B.; Wang, L. S.; Boldyrev, A. I. Nat. Chem. 2010, 2, 202. doi: 10.1038/NCHEM.534 doi: 10.1038/NCHEM.534
5. [5]
  Sergeeva, A. P.; Popov, I. A.; Piazza, Z. A.; Li, W. L.; Romanescu, C.; Wang, L. S.; Boldyrev, A. I. Acc. Chem. Res. 2014, 2, 1349. doi: 10.1021/ar400310g doi: 10.1021/ar400310g
6. [6]
  Zhai, H. J.; Zhao, Y. F.; Li, W. L.; Chen, Q.; Bai, H.; Hu, H. S.; Piazza, Z. A.; Tian, W. J.; Lu, H. G.; Wu, Y. B.; et al. Nat. Chem. 2014, 6, 727. doi: 10.1038/NCHEM.1999 doi: 10.1038/NCHEM.1999
7. [7]
  Ciuparu, D.; Klie, R. F.; Zhu, Y. M.; Pfefferle, L. J. Phys. Chem. B 2004, 108, 3967. doi: 10.1021/jp049301b doi: 10.1021/jp049301b
8. [8]
  Liu, F.; Shen, C. M.; Su, Z. J.; Ding, X. L.; Deng, S. Z.; Chen, J.; Xu, N. S.; Gao, H. J. J. Mater. Chem. 2010, 20, 2197. doi: 10.1039/b919260c doi: 10.1039/b919260c
9. [9]
  Tai, G. A.; Hu, T. S.; Zhou, Y. G.; Wang, X. F.; Kong, J. Z.; Zeng, T.; You, Y. C.; Wang, Q. Angew. Chem. Int. Ed. 2015, 54, 15473. doi: 10.1002/anie.201509285 doi: 10.1002/anie.201509285
10. [10]
  Sun, X.; Liu, X. F.; Yin, J.; Yu, J.; Li, Y.; Hang, Y.; Zhou, X. C.; Yu, M. L.; Li, J. D.; Tai, G. A.; et al. Adv. Funct. Mater. 2017, 27, 1603300. doi: 10.1002/adfm.201603300 doi: 10.1002/adfm.201603300
11. [11]
  Mannix, A. J.; Zhou, X. F.; Kiraly, B.; Wood, J. D.; Alducin, D.; Myers, B. D.; Liu, X. L.; Fisher, B. L.; Santiago, U.; Guest, J. R.; et al. Science 2015, 350, 1513. doi: 10.1126/science.aad1080 doi: 10.1126/science.aad1080
12. [12]
  Feng, B. J.; Zhang, J.; Zhong, Q.; Li, W. B.; Li, S.; Li, H.; Cheng, P.; Meng, S.; Chen, L.; Wu, K. H. Nat. Chem. 2016, 8, 563. doi: 10.1038/NCHEM.2491 doi: 10.1038/NCHEM.2491
13. [13]
  Zhang, Z. H.; Penev, E. S.; Yakobson, B. I. Chem. Soc. Rev. 2017, 46, 6746. doi: 10.1039/c7cs00261k doi: 10.1039/c7cs00261k
14. [14]
  Feng, B. J.; Sugino, O.; Liu, R. Y.; Zhang, J.; Yukawa, R.; Kawamura, M.; Iimori, T.; Kim, H.; Hasegawa, Y.; Li, H.; et al. Phys. Rev. Lett. 2017, 118, 096401. doi: 10.1103/PhysRevLett.118.096401 doi: 10.1103/PhysRevLett.118.096401
15. [15]
  Huang, Y. F.; Shirodkar, S. N.; Yakobson, B. I. J. Am. Chem. Soc. 2017, 139, 17181. doi: 10.1021/jacs.7b10329 doi: 10.1021/jacs.7b10329
16. [16]
  Zhang, Z. H.; Yang, Y.; Penev, E. S.; Yakobson, B. I. Adv. Funct. Mater. 2017, 27, 1605059. doi: 10.1002/adfm.201605059 doi: 10.1002/adfm.201605059
17. [17]
  Boustani, I.; Quandt, A.; Hernandez, E.; Rubio, A. J. Chem. Phys. 1999, 110, 3176. doi: 10.1063/1.477976 doi: 10.1063/1.477976
18. [18]
  Boustani, I. Phys. Rev. B 1997, 55, 16426. doi: 10.1103/PhysRevB.55.16426 doi: 10.1103/PhysRevB.55.16426
19. [19]
  Yang, X. B.; Ding, Y.; Ni, J. Phys. Rev. B 2008, 77, 041402. doi: 10.1103/PhysRevB.77.041402 doi: 10.1103/PhysRevB.77.041402
20. [20]
  Tang, H.; Ismail-Beigi, S. Phys. Rev. Lett. 2007, 99, 115501. doi: 10.1103/PhysRevLett.99.115501 doi: 10.1103/PhysRevLett.99.115501
21. [21]
  Szwacki, N. G.; Sadrzadeh, A.; Yakobson, B. I. Phys. Rev. Lett. 2007, 98, 166804. doi: 10.1103/PhysRevLett.98.166804 doi: 10.1103/PhysRevLett.98.166804
22. [22]
  Penev, E. S.; Bhowmick, S.; Sadrzadeh, A.; Yakobson, B. I. Nano Lett. 2012, 12, 2441. doi: 10.1021/nl3004754 doi: 10.1021/nl3004754
23. [23]
  Wu, X.; Dai, J.; Zhao, Y.; Zhuo, Z.; Yang, J.; Zeng, X. C. ACS Nano 2012, 6, 7443. doi: 10.1021/nn302696v doi: 10.1021/nn302696v
24. [24]
  Lu, H.; Mu, Y.; Bai, H.; Chen, Q.; Li, S. J. Chem. Phys. 2013, 138, 024701. doi: 10.1063/1.4774082 doi: 10.1063/1.4774082
25. [25]
  Yu, X.; Li, L.; Xu, X.; Tang, C. J. Phys. Chem. C 2012, 116, 20075. doi: 10.1021/jp305545z doi: 10.1021/jp305545z
26. [26]
  Xu, S.; Li, X.; Zhao, Y.; Liao, J.; Xu, W.; Yang, X.; Xu, H. J. Am. Chem. Soc. 2017, 139, 17233. doi: 10.1021/jacs.7b08680 doi: 10.1021/jacs.7b08680
27. [27]
  Zhou, X. F.; Dong, X.; Oganov, A. R.; Zhu, Q.; Tian, Y. J.; Wang, H. T. Phys. Rev. Lett. 2014, 112, 085502. doi: 10.1103/PhysRevLett.112.085502 doi: 10.1103/PhysRevLett.112.085502
28. [28]
  Ma, F.; Jiao, Y.; Gao, G.; Gu, Y.; Bilic, A.; Chen, Z.; Du, A. Nano Lett. 2016, 16, 3022. doi: 10.1021/acs.nanolett.5b05292 doi: 10.1021/acs.nanolett.5b05292
29. [29]
  Liu, Y.; Penev, E. S.; Yakobson, B. I. Angew. Chem. Int. Ed. 2013, 52, 3156. doi: 10.1002/anie.201207972 doi: 10.1002/anie.201207972
30. [30]
  Liu, H. S.; Gao, J. F.; Zhao, J. J. Sci. Rep. 2013, 3, 3238. doi: 10.1038/srep03238 doi: 10.1038/srep03238
31. [31]
  Zhang, Z. H.; Yang, Y.; Gao, G. Y.; Yakobson, B. I. Angew. Chem. Int. Ed. 2015, 54, 13022. doi: 10.1002/anie.201505425 doi: 10.1002/anie.201505425
32. [32]
  Meng, X. M.; Hu, J. Q.; Jiang, Y.; Lee, C. S.; Lee, S. T. Chem. Phys. Lett. 2003, 370, 825. doi: 10.1016/S0009-2614(03)00202-1 doi: 10.1016/S0009-2614(03)00202-1
33. [33]
  Cao, L. M.; Zhang, Z.; Sun, L. L.; Gao, C. X.; He, M.; Wang, Y. Q.; Li, Y. C.; Zhang, X. Y.; Li, G.; Zhang, J.; et al. Adv. Mater. 2001, 13, 1701. doi: 10.1002/1521-4095(200111)13:22<1701::AID-ADMA1701>3.0.CO;2-Q doi: 10.1002/1521-4095(200111)13:22<1701::AID-ADMA1701>3.0.CO;2-Q
34. [34]
  Cao, L. M.; Hahn, K.; Wang, Y. Q.; Scheu, C.; Zhang, Z.; Gao, C. X.; Li, Y. C.; Zhang, X. Y.; Sun, L. L.; Wang, W. K.; et al. Adv. Mater. 2002, 14, 1294. doi: 10.1002/1521-4095(20020916)14:18<1294::AID-ADMA1294>3.0.CO;2-# doi: 10.1002/1521-4095(20020916)14:18<1294::AID-ADMA1294>3.0.CO;2-#
35. [35]
  Ni, H.; Li, X. D. J. Nano Res. 2008, 1, 10. doi: 10.4028/www.scientific.net/JNanoR.1.10 doi: 10.4028/www.scientific.net/JNanoR.1.10
36. [36]
  Xu, J. Q.; Chang, Y. Y.; Gan, L.; Ma, Y.; Zhai, T. Y. Adv. Sci. 2015, 2, 1500023. doi: 10.1002/advs.201500023 doi: 10.1002/advs.201500023
37. [37]
  Tian, J. F.; Xu, Z. C.; Shen, C. M.; Liu, F.; Xu, N. S.; Gao, H. J. Nanoscale 2010, 2, 1375. doi: 10.1039/c0nr00051e doi: 10.1039/c0nr00051e
38. [38]
  Yang, J. K.; Yang, Y.; Waltermire, S. W.; Wu, X. X.; Zhang, H. T.; Gutu, T.; Jiang, Y. F.; Chen, Y. F.; Zinn, A. A.; Prasher, R.; et al. Nat. Nanotechnol. 2012, 7, 91. doi: 10.1038/NNANO.2011.216 doi: 10.1038/NNANO.2011.216
39. [39]
  Zhong, Q.; Kong, L. J.; Gou, J.; Li, W. B.; Sheng, S. X.; Yang, S.; Cheng, P.; Li, H.; Wu, K. H.; Chen, L. Phys. Rev. Mater. 2017, 1, 021001. doi: 10.1103/PhysRevMaterials.1.021001 doi: 10.1103/PhysRevMaterials.1.021001
40. [40]
  Zhang, Z. H.; Mannix, A. J.; Hu, Z. L.; Kiraly, B.; Guisinger, N. P.; Hersam, M. C.; Yakobson, B. I. Nano Lett. 2016, 16, 6622. doi: 10.1021/acs.nanolett.6b03349 doi: 10.1021/acs.nanolett.6b03349
41. [41]
  Shirodkar, S. N.; Penev, E. S.; Yakobson B. I. Sci. Bull. 2018, 63, 270. doi: 10.1016/j.scib.2018.02.019 doi: 10.1016/j.scib.2018.02.019
42. [42]
  Li, W. B.; Kong, L. J.; Chen, C. Y.; Gou, J.; Sheng, S. X.; Zhang, W. F.; Li, H.; Chen, L.; Cheng, P.; Wu, K. H. Sci. Bull. 2018, 63, 282. doi: 10.1016/j.scib.2018.02.006 doi: 10.1016/j.scib.2018.02.006
43. [43]
  Nørskov, J. K.; Bligaard, T.; Rossmeisl, J.; Christensen, C. H. Nat. Chem. 2009, 1, 37. doi: 10.1038/nchem.121 doi: 10.1038/nchem.121
44. [44]
  Zhang, Z.; Penev, E. S.; Yakobson, B. I. Nat. Chem. 2016, 8, 525. doi: 10.1038/nchem.2521 doi: 10.1038/nchem.2521
45. [45]
  Xu, S. G.; Zhao, Y. J.; Liao, J. H.; Yang, X. B.; Xu, H. Nano Res. 2016, 9, 2616. doi: 10.1007/s12274-016-1148-0 doi: 10.1007/s12274-016-1148-0
46. [46]
  Tibbetts, G. G. J. Cryst. Growth 1984, 66, 632. doi: 10.1016/0022-0248(84)90163-5 doi: 10.1016/0022-0248(84)90163-5
47. [47]
  Ding, F.; Harutyunyan, A. R.; Yakobson, B. I. Proc. Nat. Acad. Sci. USA 2009, 106, 2506. doi: 10.1073/pnas.0811946106 doi: 10.1073/pnas.0811946106
48. [48]
  Artyukhov, V. I.; Liu, Y. Y.; Yakobson, B. I. Proc. Natl. Acad. Sci. USA 2012, 109, 15136. doi: 10.1073/pnas.1207519109 doi: 10.1073/pnas.1207519109
49. [49]
  Zhang, Z. H.; Liu, Y. Y.; Yang, Y.; Yakobson, B. I. Nano Lett. 2016, 16, 1398. doi: 10.1021/acs.nanolett.5b04874 doi: 10.1021/acs.nanolett.5b04874
1. [1]
  Mengfei He , Chao Chen , Yue Tang , Si Meng , Zunfa Wang , Liyu Wang , Jiabao Xing , Xinyu Zhang , Jiahui Huang , Jiangbo Lu , Hongmei Jing , Xiangyu Liu , Hua Xu . Epitaxial Growth of Nonlayered 2D MnTe Nanosheets with Thickness-Tunable Conduction for p-Type Field Effect Transistor and Superior Contact Electrode. Acta Physico-Chimica Sinica, 2025, 41(2): 100016-. doi: 10.3866/PKU.WHXB202310029
2. [2]
  Chen LU , Qinlong HONG , Haixia ZHANG , Jian ZHANG . Syntheses, structures, and properties of copper-iodine cluster-based boron imidazolate framework materials. Chinese Journal of Inorganic Chemistry, 2025, 41(1): 149-154. doi: 10.11862/CJIC.20240407
3. [3]
  Jiao CHEN , Yi LI , Yi XIE , Dandan DIAO , Qiang XIAO . Vapor-phase transport of MFI nanosheets for the fabrication of ultrathin b-axis oriented zeolite membranes. Chinese Journal of Inorganic Chemistry, 2024, 40(3): 507-514. doi: 10.11862/CJIC.20230403
4. [4]
  Cunming Yu , Dongliang Tian , Jing Chen , Qinglin Yang , Kesong Liu , Lei Jiang . Chemistry “101 Program” Synthetic Chemistry Experiment Course Construction: Synthesis and Properties of Bioinspired Superhydrophobic Functional Materials. University Chemistry, 2024, 39(10): 101-106. doi: 10.12461/PKU.DXHX202408008
5. [5]
  Xiangyu CAO , Jiaying ZHANG , Yun FENG , Linkun SHEN , Xiuling ZHANG , Juanzhi YAN . Synthesis and electrochemical properties of bimetallic-doped porous carbon cathode material. Chinese Journal of Inorganic Chemistry, 2025, 41(3): 509-520. doi: 10.11862/CJIC.20240270
6. [6]
  Zhuo Wang , Xue Bai , Kexin Zhang , Hongzhi Wang , Jiabao Dong , Yuan Gao , Bin Zhao . MOF模板法合成氮掺杂碳材料用于增强电化学钠离子储存和去除. Acta Physico-Chimica Sinica, 2025, 41(3): 2405002-. doi: 10.3866/PKU.WHXB202405002
7. [7]
  Xintian Xie , Sicong Ma , Yefei Li , Cheng Shang , Zhipan Liu . Application of Machine Learning Potential-based Theoretical Simulations in Undergraduate Teaching Laboratory Course Design. University Chemistry, 2025, 40(3): 140-147. doi: 10.12461/PKU.DXHX202405164
8. [8]
  Rui Gao , Ying Zhou , Yifan Hu , Siyuan Chen , Shouhong Xu , Qianfu Luo , Wenqing Zhang . Design, Synthesis and Performance Experiment of Novel Photoswitchable Hybrid Tetraarylethenes. University Chemistry, 2024, 39(5): 125-133. doi: 10.3866/PKU.DXHX202310050
9. [9]
  Xiaowu Zhang , Pai Liu , Qishen Huang , Shufeng Pang , Zhiming Gao , Yunhong Zhang . Acid-Base Dissociation Equilibrium in Multiphase System: Effect of Gas. University Chemistry, 2024, 39(4): 387-394. doi: 10.3866/PKU.DXHX202310021
10. [10]
  Zhihuan XU , Qing KANG , Yuzhen LONG , Qian YUAN , Cidong LIU , Xin LI , Genghuai TANG , Yuqing LIAO . Effect of graphene oxide concentration on the electrochemical properties of reduced graphene oxide/ZnS. Chinese Journal of Inorganic Chemistry, 2024, 40(7): 1329-1336. doi: 10.11862/CJIC.20230447
11. [11]
  Xiao SANG , Qi LIU , Jianping LANG . Synthesis, structure, and fluorescence properties of Zn(Ⅱ) coordination polymers containing tetra-alkenylpyridine ligands. Chinese Journal of Inorganic Chemistry, 2024, 40(11): 2124-2132. doi: 10.11862/CJIC.20240158
12. [12]
  Hua Hou , Baoshan Wang . Course Ideology and Politics Education in Theoretical and Computational Chemistry. University Chemistry, 2024, 39(2): 307-313. doi: 10.3866/PKU.DXHX202309045
13. [13]
  Jia Yao , Xiaogang Peng . Theory of Macroscopic Molecular Systems: Theoretical Framework of the Physical Chemistry Course in the Chemistry “101 Plan”. University Chemistry, 2024, 39(10): 27-37. doi: 10.12461/PKU.DXHX202408117
14. [14]
  Congying Lu , Fei Zhong , Zhenyu Yuan , Shuaibing Li , Jiayao Li , Jiewen Liu , Xianyang Hu , Liqun Sun , Rui Li , Meijuan Hu . Experimental Improvement of Surfactant Interface Chemistry: An Integrated Design for the Fusion of Experiment and Simulation. University Chemistry, 2024, 39(3): 283-293. doi: 10.3866/PKU.DXHX202308097
15. [15]
  Zhiwen HU , Weixia DONG , Qifu BAO , Ping LI . Low-temperature synthesis of tetragonal BaTiO₃ for piezocatalysis. Chinese Journal of Inorganic Chemistry, 2024, 40(5): 857-866. doi: 10.11862/CJIC.20230462
16. [16]
  Meifeng Zhu , Jin Cheng , Kai Huang , Cheng Lian , Shouhong Xu , Honglai Liu . Classical Density Functional Theory for Understanding Electrochemical Interface. University Chemistry, 2025, 40(3): 148-152. doi: 10.12461/PKU.DXHX202405166
17. [17]
  Yaping Li , Sai An , Aiqing Cao , Shilong Li , Ming Lei . The Application of Molecular Simulation Software in Structural Chemistry Education: First-Principles Calculation of NiFe Layered Double Hydroxide. University Chemistry, 2025, 40(3): 160-170. doi: 10.12461/PKU.DXHX202405185
18. [18]
  Zhifang SU , Zongjie GUAN , Yu FANG . Process of electrocatalytic synthesis of small molecule substances by porous framework materials. Chinese Journal of Inorganic Chemistry, 2024, 40(12): 2373-2395. doi: 10.11862/CJIC.20240290
19. [19]
  Tingbo Wang , Yao Luo , Bingyan Hu , Ruiyuan Liu , Jing Miao , Huizhe Lu . Quantitative Computational Study on the Claisen Rearrangement Reaction of Allyl Phenyl Ethers: An Introduction to a Computational Chemistry Experiment. University Chemistry, 2024, 39(11): 278-285. doi: 10.12461/PKU.DXHX202403082
20. [20]
  Xiaotian ZHU , Fangding HUANG , Wenchang ZHU , Jianqing ZHAO . Layered oxide cathode for sodium-ion batteries: Surface and interface modification and suppressed gas generation effect. Chinese Journal of Inorganic Chemistry, 2025, 41(2): 254-266. doi: 10.11862/CJIC.20240260

Get Citation

PDF

XML

Metrics

PDF Downloads(18)
Abstract views(1052)
HTML views(313)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142