构筑耦合界面提高MnO2@Co3O4催化氧化甲苯性能

引用本文: 任泉明, 莫胜鹏, 樊洁, 冯振涛, 张明远, 陈培榕, 高加俭, 付名利, 陈礼敏, 吴军良, 叶代启. 构筑耦合界面提高MnO₂@Co₃O₄催化氧化甲苯性能[J]. 催化学报, 2020, 41(12): 1873-1883. doi: 10.1016/S1872-2067(20)63641-5 shu

Citation: Quanming Ren, Shengpeng Mo, Jie Fan, Zhentao Feng, Mingyuan Zhang, Peirong Chen, Jiajian Gao, Mingli Fu, Limin Chen, Junliang Wu, Daiqi Ye. Enhancing catalytic toluene oxidation over MnO₂@Co₃O₄ by constructing a coupled interface[J]. Chinese Journal of Catalysis, 2020, 41(12): 1873-1883. doi: 10.1016/S1872-2067(20)63641-5 shu

构筑耦合界面提高MnO₂@Co₃O₄催化氧化甲苯性能

a 华南理工大学环境与能源学院, 广东广州 510006, 中国;
b 华南理工大学挥发性有机物污染治理技术与装备国家工程实验室, 广东广州 510006, 中国;
c 华南理工大学广东省大气环境与污染控制重点实验室, 广东省环境风险防控与应急处置工程技术研究中心, 广东广州 510006, 中国;
d 南洋理工大学化学与生物医药工程学院, 新加坡 637459, 新加坡
基金项目:
国家重点研发计划（2017YFC0212805，2016YFC0204200）；国家自然科学基金（51878292，51878293，51678245）；广东省自然科学基金（2020A1515010929，2015B020236002，2014A030310431，2016A030311003）；广州市科技计划（201804020026）；广东省科技计划（2017B090901049）.

摘要: 挥发性有机化合物（VOCs）是大气主要污染物之一，它不仅危害人类健康，而且也危害环境.催化氧化是消除VOCs最有前景的方法之一.过渡金属氧化物由于其低成本、环境友好、高催化活性等优点，而越来越受到VOCs氧化领域的重视.一般认为，具有耦合界面的多组分金属氧化物比单组分金属氧化物表现出更好的催化性能.因此，本文在一维（1D）α-MnO₂纳米线上原位生长ZIF衍生的Co₃O₄（α-MnO₂@Co₃O₄）.由于α-MnO₂和Co₃O₄之间耦合界面的协同效应，使得α-MnO₂@Co₃O₄表现出优异的催化活性，甲苯转化率达到90%的反应温度（T_90%）约为229℃，分别低于α-MnO₂纳米线的（47℃）和热解ZIF-67产生的Co₃O₄-b的（28℃）.本文采用氢气程序升温还原（H₂-TPR），氧气程序升温脱附（O₂-TPD），X射线光电子能谱（XPS），原位漫反射红外光谱（in situ DRIFTS）等手段研究了具有α-MnO₂和Co₃O₄耦合界面的α-MnO₂@Co₃O₄催化剂表现更优异甲苯氧化性能的原因.
H₂-TPR结果表明，相比于α-MnO₂纳米线和热解ZIF-67产生的Co₃O₄-b，α-MnO₂@Co₃O₄催化剂因具有耦合界面而表现出更好的氧流动性.O₂-TPD结果表明，具有耦合界面的α-MnO₂@Co₃O₄催化剂表面有更多的表面氧空位，从而使气相氧更容易活化为表面活性氧物种.XPS结果表明，具有耦合界面的α-MnO₂@Co₃O₄催化剂表面有更多的活性氧物种，并且增强了Mn⁴⁺/Mn³⁺和Co²⁺/Co³⁺氧化还原对.原位漫反射红外结果表明，催化剂在180℃下吸附甲苯/N₂ 250min后，通入N₂吹扫30min，然后将气氛切换为20% O₂/N₂，温度保持在180℃，反应进行250min时，α-MnO₂表面吸附甲苯和苯甲醛的特征峰强度没有明显降低的趋势.相反，在反应进行50min时，α-MnO₂@Co₃O₄表面吸附甲苯和苯甲醛的特征峰强度明显减弱，至250min时，这些特征峰几乎完全消失.这进一步表明，在α-MnO₂@Co₃O₄表面，气相氧可能更容易活化为吸附氧物种，且甲苯在α-MnO₂@Co₃O₄催化剂的可能催化反应路径如下：甲苯→苯甲酸→含氧官能团的烷烃→CO₂和H₂O，而更多的吸附氧物种有利于甲苯的催化氧化，且它们在催化氧化过程中起着重要的作用.另一方面，在催化反应中，阳离子的可逆价态转变（Mn³⁺ ⇋ Mn⁴⁺+e和Co²⁺ ⇋ Co³⁺+e）为活化氧分子提供了电子.因此，具有耦合界面的α-MnO₂@Co₃O₄催化剂表现出更好的甲苯催化性能.此外，该制备方法可推广到其它一维MnO₂材料，为开发具有实际意义的高性能催化剂提供了一种新的策略.

关键词:

English

Enhancing catalytic toluene oxidation over MnO₂@Co₃O₄ by constructing a coupled interface

a School of Environment and Energy, South China University of Technology, Guangzhou 510006, Guangdong, China;
b National Engineering Laboratory for VOCs Pollution Control Technology and Equipment, South China University of Technology, Guangzhou 510006, Guangdong, China;
c Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, Guangdong Provincial Engineering and Technology Research Centre for Environmental Risk Prevention and Emergency Disposal, South China University of Technology, Guangzhou 510006, Guangdong, China;
d School of Chemical and Biomedical Engineering, Nanyang Technological University, 62 Nanyang Drive, Singapore 637459, Singapore
Received Date: 04 March 2020
Revised Date: 17 April 2020
Fund Project:
This work was supported by the National Key Research and Development Project of Research (2017YFC0212805, 2016YFC0204200, 2016YFC0204200, 2016YFC0204200), the National Natural Science Foundation of China (51878292, 51878293, 51678245), the Natural Science Foundation of Guangdong Province, China (2020A1515010929, 2015B020236002, 2014A030310431, 2016A030311003), the Science and Technology Project of Guangzhou City, China (201804020026), and the Science and Technology Program of Guangdong (2017B090901049).

Abstract: Herein, a bottom-down design is presented to successfully fabricate ZIF-derived Co₃O₄, grown in situ on a one-dimensional (1D) α-MnO₂ material, denoted as α-MnO₂@Co₃O₄. The synergistic effect derived from the coupled interface constructed between α-MnO₂ and Co₃O₄ is responsible for the enhanced catalytic activity. The resultant α-MnO₂@Co₃O₄ catalyst exhibits excellent catalytic activity at a T_90% (temperature required to achieve a toluene conversion of 90%) of approximately 229 ℃, which is 47 and 28 ℃ lower than those of the pure α-MnO₂ nanowire and Co₃O₄-b obtained via pyrolysis of ZIF-67, respectively. This activity is attributed to the increase in the number of surface-adsorbed oxygen species, which accelerate the oxygen mobility and enhance the redox pairs of Mn⁴⁺/Mn³⁺ and Co²⁺/Co³⁺. Moreover, the result of in situ diffuse reflectance infrared Fourier transform spectroscopy suggests that the gaseous oxygen could be more easily activated to adsorbed oxygen species on the surface of α-MnO₂@Co₃O₄ than on that of α-MnO₂. The catalytic reaction route of toluene oxidation over the α-MnO₂@Co₃O₄ catalyst is as follows:toluene → benzoate species → alkanes containing oxygen functional group → CO₂ and H₂O. In addition, the α-MnO₂@Co₃O₄ catalyst shows excellent stability and good water resistance for toluene oxidation. Furthermore, the preparation method can be extended to other 1D MnO₂ materials. A new strategy for the development of high-performance catalysts of practical significance is provided.

Key words:

1. [1] H. Huang, Y. J. Xu, Q. Feng, D. Y. C. Leung, Catal. Sci. Technol., 2015, 5, 2649-2669.
2. [2] M. S. Kamal, S. A. Razzak, M. M. Hossain, Atmos. Environ., 2016, 140, 117-134.
3. [3] Q. Ren, S. Mo, R. Peng, Z. Feng, M. Zhang, L. Chen, M. Fu, J. Wu, D. Ye, J. Mater. Chem. A, 2018, 6, 498-509.
4. [4] J. Chen, X. Chen, X. Chen, W. Xu, Z. Xu, H. Jia, J. Chen, Appl. Catal. B, 2018, 224, 825-835.
5. [5] Q. Ren, Z. Feng, S. Mo, C. Huang, S. Li, W. Zhang, L. Chen, M. Fu, J. Wu, D. Ye, Catal. Today, 2019, 332, 160-167.
6. [6] Y. Luo, Y. Zheng, J. Zuo, X. Feng, X. Wang, T. Zhang, K. Zhang, L. Jiang, J. Hazard. Mater., 2018, 349, 119-127.
7. [7] Z. Ye, J. M. Giraudon, N. Nuns, P. Simon, N. De Geyter, R. Morent, J. F. Lamonier, Appl. Catal. B, 2018, 223, 154-166.
8. [8] H. Deng, S. Kang, C. Wang, H. He, C. Zhang, Chem. Eng. J., 2018, 348, 361-369.
9. [9] R. Peng, S. Li, X. Sun, Q. Ren, L. Chen, M. Fu, J. Wu, D. Ye, Appl. Catal. B, 2018, 220, 462-470.
10. [10] Q. Meng, J. Liu, X. Weng, P. Sun, J. Darr, Z. Wu, Catal. Sci. Technol., 2018, 8, 1858-1866.
11. [11] M. Wang, L. Zhang, W. Huang, T. Xiu, C. Zhuang, J. Shi, Chem. Eng. J., 2017, 320, 667-676.
12. [12] B. Bai, J. Li, J. Hao, Appl. Catal. B, 2015, 164, 241-250.
13. [13] Y. Wei, L. Ni, M. Li, J. Zhao, Catal. Today, 2017, 297, 188-192.
14. [14] F. Wang, H. Dai, J. Deng, G. Bai, K. Ji, Y. Liu, Environ. Sci. Technol., 2012, 46, 4034-4041.
15. [15] J. Zhang, Y. Li, L. Wang, C. Zhang, H. He, Catal. Sci. Technol., 2015, 5, 2305-2313.
16. [16] S. C. Kim, W. G. Shim, Appl. Catal. B, 2010, 98, 180-185.
17. [17] Y. Deng, W. Tang, W. Li, Y. Chen, Catal. Today, 2018, 308, 58-63.
18. [18] S. Putla, M. H. Amin, B. M. Reddy, A. Nafady, K. A. Al Farhan, S. K. Bhargava, ACS Appl. Mater. Interfaces, 2015, 7, 16525-16535.
19. [19] X. Chen, X. Chen, E. Yu, S. Cai, H. Jia, J. Chen, P. Liang, Chem. Eng. J., 2018, 344, 469-479.
20. [20] X. Zhang, X. Lv, F. Bi, G. Lu, Y. Wang, Mol. Catal., 2020, 482, 110701.
21. [21] W. Han, H. Zhao, F. Dong, Z. Tang, Nanoscale, 2018, 10, 21307-21319.
22. [22] M. Zhong, D. Yang, C. Xie, Z. Zhang, Z. Zhou, X. H. Bu, Small, 2016,12, 5564-5571.
23. [23] X. Wang, S. Zhao, Y. Zhang, Z. Wang, J. Feng, S. Song, H. Zhang, Chem. Sci., 2016, 7, 1109-1114.
24. [24] N. Huang, Z. Qu, C. Dong, Y. Qin, X. Duan, Appl. Catal. A, 2018, 560, 195-205.
25. [25] S. Rong, P. Zhang, F. Liu, Y. Yang, ACS Catal., 2018, 8, 3435-3446.
26. [26] S. Mo, Q. Zhang, Q. Ren, J. Xiong, M. Zhang, Z. Feng, D. Yan, M. Fu, J. Wu, L. Chen, D. Ye, J. Hazard. Mater., 2019, 364, 571-580.
27. [27] S. Mo, Q. Zhang, S. Li, Q. Ren, M. Zhang, Y. Xue, R. Peng, H. Xiao, Y. Chen, D. Ye, ChemCatChem, 2018, 10, 3012-3026.
28. [28] X. Feng, J. Guo, X. Wen, M. Xu, Y. Chu, S. Yuan, Appl. Surf. Sci., 2018, 445, 145-153.
29. [29] S. Mo, Q. Zhang, M. Zhang, Q. Zhang, J. Li, M. Fu, J. Wu, P. Chen, D. Ye, Nanoscale Horiz., 2019, 4, 1425-1433.
30. [30] X. Zhang, Y. Liu, J. Deng, X. Yu, Z. Han, K. Zhang, H. Dai, Appl. Catal. B, 2019, 257, 117879.
31. [31] P. Li, C. He, J. Cheng, C. Y. Ma, B. J. Dou, Z. P. Hao, Appl. Catal. B, 2011, 101, 570-579.
32. [32] X. Ma, X. Yu, X. Yang, M. Lin, M. Ge, ChemCatChem, 2019, 11, 1214-1221.
33. [33] C. Ma, Z. Mu, J. Li, Y. Jin, J. Cheng, G. Lu, Z. Hao, S. Qiao, J. Am. Chem. Soc., 2010, 132, 2608-2613.
34. [34] V. P. Santos, M. F. R. Pereira, J. J. M. Órfão, J. L. Figueiredo, Appl. Catal. B, 2010, 99, 353-363.
35. [35] H. C. Genuino, S. Dharmarathna, E. C. Njagi, M. C. Mei, S. L. Suib, J. Phys. Chem. C, 2012, 116, 12066-12078.
36. [36] X. Wang, Y. Liu, T. Zhang, Y. Luo, Z. Lan, K. Zhang, J. Zuo, L. Jiang, R. Wang, ACS Catal., 2017, 7, 1626-1636.
37. [37] S. Mo, S. Li, Q. Ren, M. Zhang, Y. Sun, B. Wang, Z. Feng, Q. Zhang, Y. Chen, D. Ye, Nanoscale, 2018, 10, 7746-7758.
38. [38] S. D. Perera, M. Rudolph, R. G. Mariano, N. Nijem, J. P. Ferraris, Y. J. Chabal, K. J. Balkus, Nano Energy, 2013, 2, 966-975.
39. [39] J. Y. Liao, D. Higgins, G. Lui, V. Chabot, X. Xiao, Z. Chen, Nano Lett., 2013, 13, 5467-5473.
40. [40] S. Mo, S. Li, W. Li, J. Li, J. Chen, Y. Chen, J. Mater. Chem. A, 2016, 4, 8113-8122.
41. [41] W. Tang, X. Wu, D. Li, Z. Wang, G. Liu, H. Liu, Y. Chen, J. Mater. Chem. A, 2014, 2, 2544-2554.
42. [42] Z.-Y. Tian, P. H. Tchoua Ngamou, V. Vannier, K. Kohse-Höinghaus, N. Bahlawane, Appl. Catal. B, 2012, 117-118, 125-134.
43. [43] J. Chen, X. Chen, D. Yan, M. Jiang, W. Xu, H. Yu, H. Jia, Appl. Catal. B, 2019, 250, 396-407.
44. [44] G. Xia, Y. Yin, W. Willis, J. Wang, S. Suib, J. Catal., 1999, 185, 91-105.
45. [45] L. Li, J. Luo, Y. Liu, F. Jing, D. Su, W. Chu, ACS Appl. Mater. Interfaces, 2017, 9, 21798-21808.
46. [46] Z. Qu, K. Gao, Q. Fu, Y. Qin, Catal. Commun., 2014, 52, 31-35.
47. [47] H. Yang, H. Dai, J. Deng, S. Xie, W. Han, W. Tan, Y. Jiang, C. T. Au, ChemSusChem, 2014, 7, 1745-1754.
48. [48] D. A. Aguilera, A. Perez, R. Molina, S. Moreno, Appl. Catal. B, 2011, 104, 144-150.
49. [49] J. Deng, S. He, S. Xie, H. Yang, Y. Liu, G. Guo, H. Dai, Environ. Sci. Technol., 2015, 49, 11089-11095.
50. [50] S. Xie, J. Deng, Y. Liu, Z. Zhang, H. Yang, Y. Jiang, H. Arandiyan, H. Dai, C.T. Au, Appl. Catal. A, 2015, 507, 82-90.
51. [51] Y. Liu, H. Dai, J. Deng, S. Xie, H. Yang, W. Tan, W. Han, Y. Jiang, G. Guo, J. Catal., 2014, 309, 408-418.
52. [52] L. Liu, J. Li, H. Zhang, L. Li, P. Zhou, X. Meng, M. Guo, J. Jia, T. Sun, J. Hazard. Mater., 2019, 362, 178-186.
53. [53] Y. Wang, H. Arandiyan, Y. Liu, Y. Liang, Y. Peng, S. Bartlett, H. Dai, S. Rostamnia, J. Li, ChemCatChem, 2018, 10, 3429-3434.
54. [54] Q. Yang, D. Wang, C. Wang, X. Li, K. Li, Y. Peng, J. Li, Catal. Sci. Technol., 2018, 8, 3166-3173.
55. [55] X. Yang, X. Y. Yu, M. Jing, W. Song, J. Liu, M. Ge, ACS Appl. Mater. Interfaces, 2018, 11, 730-739.
56. [56] X. Chen, X. Chen, S. Cai, E. Yu, J. Chen, H. Jia, Appl. Surf. Sci., 2019, 475, 312-324.
57. [57] Q. Yang, D. Wang, C. Wang, K. Li, Y. Peng, J. Li, ChemCatChem, 2018, 10, 4852-4857.
58. [58] Y. Wang, L. Guo, M. Chen, C. Shi, Catal. Sci. Technol., 2018, 8, 459-471.
59. [59] J. Hu, W. B. Li, R. F. Liu, Catal. Today, 2018, 314, 147-153.
60. [60] S. Zhao, F. Hu, J. Li, ACS Catal., 2016, 6, 3433-3441.
61. [61] L. Zhao, Z. Zhang, Y. Li, X. Leng, T. Zhang, F. Yuan, X. Niu, Y. Zhu, Appl. Catal. B, 2019, 245, 502-512.
62. [62] M. Wang, F. Zhang, X. Zhu, Z. Qi, B. Hong, J. Ding, J. Bao, S. Sun, C. Gao, Langmuir, 2015, 31, 1730-1736.
63. [63] Y. Liao, X. Zhang, R. Peng, M. Zhao, D. Ye, Appl. Surf. Sci., 2017, 405, 20-28.
64. [64] S. Mo, Q. Zhang, J. Li, Y. Sun, Q. Ren, S. Zou, Q. Zhang, J. Lu, M. Fu, D. Mo, J. Wu, H. Huang, D. Ye, Appl. Catal. B, 2020, 264, 118464.
65. [65] W. Tang, X. Wu, G. Liu, S. Li, D. Li, W. Li, Y. Chen, J. Rare Earths, 2015, 33, 62-69.

扫一扫看文章

计量

PDF下载量: 38
文章访问数: 3027
HTML全文浏览量: 313

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

构筑耦合界面提高MnO₂@Co₃O₄催化氧化甲苯性能

English

Enhancing catalytic toluene oxidation over MnO₂@Co₃O₄ by constructing a coupled interface

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处