Citation: Yao Xu, Chen-Guang Liu, Hua-Rong Nie, Ai-Hua He. Fractionated and Confined Crystallization of Polybutene-1 in Immiscible Polypropylene/Polybutene-1 Blends[J]. Chinese Journal of Polymer Science, ;2018, 36(7): 859-865. doi: 10.1007/s10118-018-2103-1 shu

Fractionated and Confined Crystallization of Polybutene-1 in Immiscible Polypropylene/Polybutene-1 Blends

Shandong Provincial Key Laboratory of Olefin Catalysis and Polymerization, Key Laboratory of Rubber-Plastics (Ministry of Education), School of Polymer Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China

Corresponding author: Chen-Guang Liu, liuchenguang@qust.edu.cn (C.G.L.) Hua-Rong Nie, niehuar@qust.edu.cn Ai-Hua He, ahhe@qust.edu.cn
Received Date: 14 October 2017
Accepted Date: 17 December 2017
Available Online: 13 July 2018

In this work, the crystallization of immiscible polypropylene (PP)/polybutene-1 (PB) blends, in particular the effect of crystal morphology of PP (HTC, high T_m component) on the subsequent crystallization behavior of PB (LTC, low T_m component) was studied. Herein, we firstly indicated that PP/PB blends were not completely compatible but characterized as the LCST-like phase diagram above the melting temperature of PP. Crystallization of PP at different crystallization temperatures brought about different PP crystal morphologies and PB was segregated and confined at different locations. Much larger-sized domain of PB component appeared in PP spherulites resulting from the effects of non-negligible phase separation and the slower PP crystallization rate as PP crystallized at high temperature. As temperature continued to fall below T_m of PB, the fractionated and confined crystallization of PB occurred in the framework of PP spherulites, reflected by the decreased crystallization temperature (T_c) of PB and the formation of form I′ beside form II. Notably, if PP previously crystallized at high T_c, fractionated crystallization of PB became predominant and confined crystallization of PB became weak due to the much wider droplet-size distribution of PB domains.
- Polypropylene,
- Polybutene,
- Confined crystallization,
- Morphology
1. [1]
  Luciani, L.; Seppälä, J.; Löfgren, B. Poly-1-butene: its preparation, properties and challenges. Prog. Polym. Sci. 1988, 13(1), 37-62. doi: 10.1016/0079-6700(88)90010-X
2. [2]
  Jones, A. T.; Aizlewood, J. M.; Beckett, D. R. Crystalline forms of isotactic polypropylene. Macromol. Chem. Phys. 2010, 75(1), 134-158.
3. [3]
  Siegmann, A. Crystallization of crystalline/crystalline blends: polypropylene/polybutene-1. J. Appl. Polym. Sci. 1982, 27(3), 1053-1056. doi: 10.1002/app.1982.070270324
4. [4]
  Lee, M. S. The polymer-polymer interaction parameter in polybutene-1/polypropylene blends. J. Polym. Res. 1996, 3(4), 235-258. doi: 10.1007/BF01493493
5. [5]
  Ji, Y.; Su, F.; Li, L. B. Mixing assisted direct formation of isotactic poly(1-butene) form I′ crystals from blend melt of isotactic poly(1-butene)/polypropylene. Macromolecules 2016, 49, 1761-1769. doi: 10.1021/acs.macromol.5b02161
6. [6]
  Tol, R. T.; Mathot, V. B. F.; Groeninckx, G. Confined crystallization phenomena in immiscible polymer blends with dispersed micro and nanometer sized PA6 droplets, part 2: reactively compatibilized PS/PA6 and (PPE/PS)/PA6 blends. Polymer 2005, 46(2), 383-396. doi: 10.1016/j.polymer.2004.10.070
7. [7]
  He, Z.; Liang, Y.; Han, C. C. Confined nucleation and growth of poly(ethylene oxide) on the different crystalline morphology of poly(butylene succinate) from a miscible blend. Macromolecules 2013, 46(20), 8264-8274. doi: 10.1021/ma4015214
8. [8]
  Qiu, Z.; Yan, C.; Lu, J.; Yang, W. Miscible crystalline/crystalline polymer blends of poly(vinylidene fluoride) and poly(butylenes succinate-co-butylene adipate): spherulitic morphologies and crystallization kinetics. Macromolecules 2007, 40, 5047-5053. doi: 10.1021/ma070255y
9. [9]
  He, Y.; Zhu, B.; Kai, W.; Inoue, Y. Nanoscale-confined and fractional crystallization of poly(ethylene oxide) in the interlamellar region of poly(butylene succinate). Macromolecules 2004, 37, 3337-3345. doi: 10.1021/ma035886g
10. [10]
  He, Y.; Zhu, B.; Kai, W.; Inoue, Y. Effects of crystallization condition of poly(butylene succinate) component on the crystallization of poly(ethylene oxide) component in their miscible blends. Macromolecules 2004, 37, 8050-8056. doi: 10.1021/ma049482f
11. [11]
  Yordanov, C.; Minkova, L. Fractionated crystallization of compatibilized LDPE/PA6 blends. Eur. Polym. J. 2005, 41(3), 527-534. doi: 10.1016/j.eurpolymj.2004.10.034
12. [12]
  Pompe, G.; Pötschke, P.; Pionteck, J. Reactive melt blending of modified polyamide and polypropylene: assessment of compatibilization by fractionated crystallization and blend morphology. J. Appl. Polym. Sci. 2002, 86(13), 3445-3453. doi: 10.1002/app.v86:13
13. [13]
  Arnal, M. L.; Müller, A. J.; Maiti, P.; Hikosaka, M. Nucleation and crystallization of isotactic poly(propylene) droplets in an immiscible polystyrene matrix. Macromol. Chem. Phys. 2000, 201(17), 2493-2504. doi: 10.1002/(ISSN)1521-3935
14. [14]
  Balsamo, V.; Gouveia, L. M. Interplay of fractionated crystallization and morphology in polypropylene/poly(ε-caprolactone) blends. J. Polym. Sci., Part B: Polym. Phys. 2007, 45(11), 1365-1379. doi: 10.1002/(ISSN)1099-0488
15. [15]
  Morales, R. A.; Arnal, M. L.; Müller, A. J. The evaluation of the state of dispersion in immiscible blends where the minor phase exhibits fractionated crystallization. Polym. Bull. 1995, 35(3), 379-386. doi: 10.1007/BF00963138
16. [16]
  Bernal-Lara, T. E.; Liu, R. Y. F.; Hiltner, A.; Baer, E. Structure and thermal stability of polyethylene nanolayers. Polymer 2005, 46(9), 3043-3055. doi: 10.1016/j.polymer.2005.01.055
17. [17]
  Everaert, V.; Groeninckx, G.; Koch, M. H. J.; Reynaers, H. Influence of fractionated crystallization on the semicrystalline structure of (POM/(PS/PPE)) blends. Static and time-resolved SAXS, WAXD and DSC studies. Polymer 2003, 44(12), 3491-3508.
18. [18]
  Bose, S.; Bhattacharyya, A. R.; Kodgire, P. V.; Misra, A. Fractionated crystallization in PA6/ABS blends: influence of a reactive compatibilizer and multiwall carbon nanotubes. Polymer 2007, 48(1), 356-362. doi: 10.1016/j.polymer.2006.11.019
19. [19]
  Cormia, R. L.; Price, F. P.; Turnbull, D. Kinetics of crystal nucleation in polyethylene. J. Chem. Phys. 1962, 37(6), 1333-1340. doi: 10.1063/1.1733282
20. [20]
  Shieh, Y. T.; Lee, M. S.; Chen, S. A. Crystallization behavior, crystal transformation, and morphology of polypropylene/polybutene-1 blends. Polymer 2001, 42(9), 4439-4448. doi: 10.1016/S0032-3861(00)00567-X
21. [21]
  Kalay, G.; Kalay, C. R. Compounding and injection molding of polybutene-1/polypropylene blends. J. Appl. Polym. Sci. 2003, 88(3), 806-813. doi: 10.1002/(ISSN)1097-4628
22. [22]
  Chen, W.; Li, X.; Li, L. B. Deformation-induced crystal-crystal transition of polybutene-1: an in situ FTIR imaging study. J. Mater. Sci. 2013, 48(14), 4925-4933. doi: 10.1007/s10853-013-7273-1
23. [23]
  Shao, H. F.; Ma, Y. P.; Nie, H. R. Solvent vapor annealing induced polymorphic transformation of polybutene-1. Chinese J. Polym. Sci. 2016, 34(9), 1141-1149. doi: 10.1007/s10118-016-1823-3
24. [24]
  Zeng, W. Preparation and properties of PB-1/PP blends. Polym. Plast. Technol. 2012, 51(7), 744-749. doi: 10.1080/03602559.2012.663038
25. [25]
  Arnal, M. L.; Matos, M. E.; Morales, R. A. Evaluation of the fractionated crystallization of dispersed polyolefins in a polystyrene matrix. Macromol. Chem. Phys. 1998, 199(10), 2275-2288. doi: 10.1002/(ISSN)1521-3935
26. [26]
  Shibata, M.; Teramoto, N.; Inoue, Y. Mechanical properties, morphologies, and crystallization behavior of plasticized poly(l-lactide)/poly(butylene succinate-co-l-lactate) blends. Polymer 2007, 48(9), 2768-2777. doi: 10.1016/j.polymer.2007.02.065
27. [27]
  Ding, M. M.; Fu, X. T.; Cao, J.; Fu, Q. Fractionated crystallization of HDPE in PS/POE/HDPE/SBS blends. Chinese J. Polym. Sci. 2008, 26(6), 733-740. doi: 10.1142/S0256767908003485
1. [1]
  Zhongjie Li , Xiangyue Kong , Yuhao Liu , Huayu Qiu , Lingling Zhan , Shouchun Yin . Progress of additives for morphology control in organic photovoltaics. Chinese Chemical Letters, 2024, 35(6): 109378-. doi: 10.1016/j.cclet.2023.109378
2. [2]
  Kai Han , Guohui Dong , Ishaaq Saeed , Tingting Dong , Chenyang Xiao . Morphology and photocatalytic tetracycline degradation of g-C3N4 optimized by the coal gangue. Chinese Journal of Structural Chemistry, 2024, 43(2): 100208-100208. doi: 10.1016/j.cjsc.2023.100208
3. [3]
  Xin Lu , Haoran Sun , Xiaomeng Li , Chunrui Li , Jinfeng Wang , Dandan Zhou . C14-HSL limits the mycelial morphology of pathogen Trichosporon cells but enhances their aggregation: Mechanisms and implications. Chinese Chemical Letters, 2024, 35(6): 108936-. doi: 10.1016/j.cclet.2023.108936
4. [4]
  Jun Lu , Jinrui Yan , Yaohao Guo , Junjie Qiu , Shuangliang Zhao , Bo Bao . Controlling solid form and crystal habit of triphenylmethanol by antisolvent crystallization in a microfluidic device. Chinese Chemical Letters, 2024, 35(4): 108876-. doi: 10.1016/j.cclet.2023.108876
5. [5]
  Naihong Wang , Longkang Zhang , Yejun Guan , Peng Wu , Hao Xu . Pt confined in Sn-ECNU-46 zeolite for efficient alkane dehydrogenation. Chinese Journal of Structural Chemistry, 2024, 43(4): 100248-100248. doi: 10.1016/j.cjsc.2024.100248
6. [6]
  Hui-Juan Wang , Wen-Wen Xing , Zhen-Hai Yu , Yong-Xue Li , Heng-Yi Zhang , Qilin Yu , Hongjie Zhu , Yao-Yao Wang , Yu Liu . Cucurbit[7]uril confined phenothiazine bridged bis(bromophenyl pyridine) activated NIR luminescence for lysosome imaging. Chinese Chemical Letters, 2024, 35(6): 109183-. doi: 10.1016/j.cclet.2023.109183
7. [7]
  Binyang Qin , Mengqi Wang , Shimei Wu , Yining Li , Chilin Liu , Yufei Zhang , Haosen Fan . Carbon dots confined nanosheets assembled NiCo₂S₄@CDs cross-stacked architecture for enhanced sodium ion storage. Chinese Chemical Letters, 2024, 35(7): 108921-. doi: 10.1016/j.cclet.2023.108921

Get Citation

PDF

XML

Metrics

PDF Downloads(0)
Abstract views(607)
HTML views(14)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142