Citation: A. Memon Mushtaque, Sun Jin-hua, Jung Hee-Tae, Yan Shou-ke, Geng Jian-xin. Fabrication of Polythiophene Patterns through Blending of a Thermally Curable Polythiophene with Poly(methyl methacrylate) and Selective Thermal Curation[J]. Chinese Journal of Polymer Science, ;2017, 35(3): 422-433. doi: 10.1007/s10118-017-1895-8 shu

Fabrication of Polythiophene Patterns through Blending of a Thermally Curable Polythiophene with Poly(methyl methacrylate) and Selective Thermal Curation

a.
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
b.
Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China
c.
National Research Laboratory, Department of Chemical and Biomolecular Engineering(BK-21), Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Korea

Corresponding author: Jung Hee-Tae, heetae@kaist.ac.kr Yan Shou-ke, skyan@mail.buct.edu.cn Geng Jian-xin, jianxingeng@mail.ipc.ac.cn
Received Date: 20 September 2016
Revised Date: 11 October 2016
Accepted Date: 24 October 2016

Fund Project: the Center for Nanoscale Mechatronics & Manufacturing 08K140100414, CNMMthe National Research Laboratory Program of the Korea Science and Engineering Foundation (KOSEF), the World Class University Program R32-2008-000-10142-0the National Natural Science Foundation of China 21274158 and 91333114

In this study, we demonstrate a novel method for fabricating polythiophene patterns, i.e., cylindrical holes and cylinders, through blending of a thermally curable polythiophene carrying with tertiary ester groups (PT-tert-ESTER) and poly(methyl methacrylate) (PMMA), followed by thermal conversion of the PT-tert-ESTER to an insoluble polythiophene via low-temperature cleavage of the tertiary ester groups and removal of the PMMA component via ultraviolet degradation. We show that the surface polarity of substrates, the mass ratio of PT-tert-ESTER to PMMA in the blend solutions as well as the concentration of the blend solutions strongly influence the formation of the polythiophene patterns. Cylindrical holes are more readily formed on less polar substrates when a PT-tert-ESTER dominated blend solution is used, while cylinders are more readily formed on more polar substrates when a PMMA dominated blend solution is used. Moreover, the diameters of both the cylindrical holes and the cylinders decrease as the PT-tert-ESTER concentration is increased in the respective ranges of the PT-tert-ESTER/PMMA ratios where the patterns are formed. Grazing incident X-ray diffraction data have indicated that the patterning of the PT-tert-ESTER component in the blend films improves the crystallinity of PT-tert-ESTER as well as the molecular packing of the insoluble polythiophene in the resultant patterned polythiophene films.
- Polythiophene,
- Patterns,
- Cylindrical holes,
- Cylinders,
- Blending
1. [1]
  Lam, J.W.Y. and Tang, B.Z., Acc. Chem. Res., 2005, 38(9): 745 doi: 10.1021/ar040012f
2. [2]
  Lee, T.W., Adv. Funct. Mater., 2007, 17(16): 3128 doi: 10.1002/(ISSN)1616-3028
3. [3]
  Lee, T.W., Chung, Y., Kwon, O. and Park, J.J., Adv. Funct. Mater., 2007, 17(3): 390 doi: 10.1002/(ISSN)1616-3028
4. [4]
  Dyreklev, P., Berggren, M., Inganas, O., Andersson, M.R., Wennerstrom, O. and Hjertberg, T., Adv. Mater., 1995, 7(1): 43
5. [5]
  Goh, C., Kline, R.J., McGehee, M.D., Kadnikova, E.N. and Frechet, J.M.J., Appl. Phys. Lett., 2005, 86(12): 122110
6. [6]
  Braun, D., Gustafsson, G., McBranch, D. and Heeger, A.J., J. Appl. Phys., 1992, 72(2): 564
7. [7]
  Yang, H.C., Shin, T.J., Yang, L., Cho, K., Ryu, C.Y. and Bao, Z.N., Adv. Funct. Mater., 2005, 15(4): 671 doi: 10.1002/(ISSN)1616-3028
8. [8]
  Ong, B.S., Wu, Y.L., Liu, P. and Gardner, S., Adv. Mater., 2005, 17(9): 1141
9. [9]
  McCulloch, I., Bailey, C., Giles, M., Heeney, M., Love, I., Shkunov, M., Sparrowe, D. and Tierney, S., Chem. Mater., 2005, 17(6): 1381
10. [10]
  Park, Y.D., Kim, D.H., Lim, J.A., Cho, J.H., Jang, Y., Lee, W.R., Park, J.H. and Cho, K., J. Phys. Chem. C, 2008, 112(5): 1705 doi: 10.1021/jp077125b
11. [11]
  Scharber, M.C., Wuhlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A.J. and Brabec, C.L., Adv. Mater., 2006, 18(6): 789
12. [12]
  Chochos, C.L., Economopoulos, S.P., Deimede, V., Gregoriou, V.G., Lloyd, M.T., Malliaras, G.G. and Kallitsis, J.K., J. Phys. Chem. C, 2007, 111(28): 10732
13. [13]
  Geng, J.X., Kong, B.S., Yang, S.B., Youn, S.C., Park, S., Joo, T. and Jung, H.T., Adv. Funct. Mater., 2008, 18(18): 2659 doi: 10.1002/adfm.v18:18
14. [14]
  Geng, J.X. and Zeng, T.Y., J. Am. Chem. Soc., 2006, 128(51): 16827 doi: 10.1021/ja065035z
15. [15]
  Qin, R.P., Jiang, Y.R., Zhang, H.X., Zhang, K.X., Zhang, Q.Y. and Chang, F.G., Chinese J. Polym. Sci., 2015, 33(3): 490
16. [16]
  Keshtov, M.L., Marochkin, D.V., Fu, Y.Y., Xie, Z.Y., Geng, Y.H., Kochurov, V.S. and Khokhlov, A.R., Chinese J. Polym. Sci., 2014, 32(7): 844
17. [17]
  Li, B., Sauve, G., Iovu, M.C., Jeffries-El, M., Zhang, R., Cooper, J., Santhanam, S., Schultz, L., Revelli, J.C., Kusne, A.G., Kowalewski, T., Snyder, J.L., Weiss, L.E., Fedder, G.K., McCullough, R.D. and Lambeth, D.N., Nano Lett., 2006, 6(8): 1598
18. [18]
  Nilsson, K.P.R. and Inganas, O., Nat. Mater., 2003, 2(6): 419 doi: 10.1038/nmat899
19. [19]
  Tang, Y.L., He, F., Yu, M.H., Feng, F.D., An, L.L., Sun, H., Wang, S., Li, Y.L. and Zhu, D.B., Macromol. Rapid Commun., 2006, 27(6): 389 doi: 10.1002/(ISSN)1521-3927
20. [20]
  Li, C., Numata, M., Takeuchi, M. and Shinkai, S., Angew. Chem., Int. Ed., 2005, 44(39): 6371 doi: 10.1002/(ISSN)1521-3773
21. [21]
  Meng, D., Yang, S., Sun, D., Zeng, Y., Sun, J., Li, Y., Yan, S., Huang, Y., Bielawski, C.W. and Geng, J., Chem. Sci., 2014, 5(8): 3130
22. [22]
  Yang, S., Meng, D., Sun, J., Hou, W., Ding, Y., Jiang, S., Huang, Y., Huang, Y. and Geng, J., RSC Adv., 2014, 4(48): 25051 doi: 10.1039/c4ra02228a
23. [23]
  Yang, S., Meng, D., Sun, J., Huang, Y., Huang, Y. and Geng, J., ACS Appl. Mater. Interfaces, 2014, 6(10): 7686 doi: 10.1021/am500973m
24. [24]
  Zhang, H., Zhang, G., Xu, J.K., Wen, Y.P., Ding, W.C., Zhang, J., Ming, S.L. and Zhen, S.J., Chinese. J. Polym. Sci., 2016, 34(2): 229 doi: 10.1007/s10118-016-1742-3
25. [25]
  Memon, M.A., Bai, W., Sun, J.H., Imran, M., Phulpoto, S.N., Yan, S.K., Huang, Y. and Geng, J.X., ACS Appl. Mater. Interfaces, 2016, 8(18): 11711 doi: 10.1021/acsami.6b01879
26. [26]
  Meng, D., Yang, S., Guo, L., Li, G., Ge, J., Huang, Y., Bielawski, C.W. and Geng, J., Chem. Commun., 2014, 50(92): 14345
27. [27]
  Erb, T., Zhokhavets, U., Gobsch, G., Raleva, S., Stuhn, B., Schilinsky, P., Waldauf, C. and Brabec, C.J., Adv. Funct. Mater., 2005, 15(7): 1193 doi: 10.1002/(ISSN)1616-3028
28. [28]
  Kim, D.H., Park, Y.D., Jang, Y.S., Yang, H.C., Kim, Y.H., Han, J.I., Moon, D.G., Park, S.J., Chang, T.Y., Chang, C.W., Joo, M.K., Ryu, C.Y. and Cho, K.W., Adv. Funct. Mater., 2005, 15(1): 77 doi: 10.1002/(ISSN)1616-3028
29. [29]
  Chen, F.C., Lin, Y.K. and Ko, C.J., Appl. Phys. Lett., 2008, 92(2): 023307 doi: 10.1063/1.2835047
30. [30]
  Yang, F., Shtein, M. and Forrest, S.R., Nat. Mater., 2005, 4(1): 37
31. [31]
  Yang, F., Shtein, M. and Forrest, S.R., J. Appl. Phys., 2005, 98(1): 014906 doi: 10.1063/1.1941480
32. [32]
  Chen, Y.Z., Wang, Z.B., Gong, Y.M., Huang, H.Y. and He, T.B., J. Phys. Chem. B, 2006, 110(4): 1647
33. [33]
  Lee, J.I., Cho, S.H., Park, S.M., Kim, J.K., Kim, J.K., Yu, J.W., Kim, Y.C. and Russell, T.P., Nano Lett., 2008, 8(8): 2315
34. [34]
  Wei, J.H., Coffey, D.C. and Ginger, D.S., J. Phys. Chem. B, 2006, 110(48): 24324
35. [35]
  Park, L.Y., Munro, A.M. and Ginger, D.S., J. Am. Chem. Soc., 2008, 130(47): 15916 doi: 10.1021/ja804088j
36. [36]
  Yim, K.H., Zheng, Z.J., Friend, R.H., Huck, W.T.S. and Kim, J.S., Adv. Funct. Mater., 2008, 18(19): 2897 doi: 10.1002/adfm.v18:19
37. [37]
  Im, S.G., Kim, B.S., Lee, L.H., Tenhaeff, W.E., Hammond, P.T. and Gleason, K.K., Macromol. Rapid Commun., 2008, 29(20): 1648 doi: 10.1002/marc.v29:20
38. [38]
  Khanduyeva, N., Senkovskyy, V., Beryozkina, T., Horecha, M., Stamm, M., Uhrich, C., Riede, M., Leo, K. and Kiriy, A., J. Am. Chem. Soc., 2009, 131(1): 153 doi: 10.1021/ja8050734
39. [39]
  Zhang, F.L., Nyberg, T. and Inganas, O., Nano Lett., 2002, 2(12): 1373
40. [40]
  Li, D.W. and Guo, L.J., J. Phys. D: Appl. Phys., 2008, 41(10): 105115 doi: 10.1088/0022-3727/41/10/105115
41. [41]
  Liu, J.S., Kadnikova, E.N., Liu, Y.X., McGehee, M.D. and Frechet, J.M.J., J. Am. Chem. Soc., 2004, 126(31): 9486 doi: 10.1021/ja047452m
42. [42]
  Bjerring, M., Nielsen, J.S., Nielsen, N.C. and Krebs, F.C., Macromolecules, 2007, 40(16): 6012
43. [43]
  Bower, D.I., "An introduction to polymer physics", Cambridge University Press, Cambridge, 2002
44. [44]
  Moons, E., J. Phys.: Condens. Matter, 2002, 14(47): 12235 doi: 10.1088/0953-8984/14/47/301
45. [45]
  Walheim, S., Ramstein, M. and Steiner, U., Langmuir, 1999, 15(14): 4828
46. [46]
  Walheim, S., Boltau, M., Mlynek, J., Krausch, G. and Steiner, U., Macromolecules, 1997, 30(17): 4995
47. [47]
  Yang, X.N., Loos, J., Veenstra, S.C., Verhees, W.J.H., Wienk, M.M., Kroon, J.M., Michels, M.A.J. and Janssen, R.A.J., Nano Lett., 2005, 5(4): 579
48. [48]
  Kim, Y., Cook, S., Tuladhar, S.M., Choulis, S.A., Nelson, J., Durrant, J.R., Bradley, D.D.C., Giles, M., McCulloch, I., Ha, C.S. and Ree, M., Nat. Mater., 2006, 5(3): 197
49. [49]
  Prosa, T.J., Winokur, M.J. and McCullough, R.D., Macromolecules, 1996, 29(10): 3654
50. [50]
  Chai, L.G., Zhou, H.X., Sun, X.L., Li, H.H., Yan, S.K. and Yang, X.Q., Chinese J. Polym. Sci., 2016, 34(4): 513
51. [51]
  Hou, W.P., Zhao, N.J., Meng, D., Tang, J., Zeng, Y., Wu, Y., Weng, Y.Z.W., Cheng, C.G., Xu, X.L., Li, Y., Zhang, J.P., Huang, Y., Bielawski, C.W. and Geng, J.X., ACS Nano, 2016, 10(5): 5189

Get Citation

PDF

XML

Metrics

PDF Downloads(0)
Abstract views(641)
HTML views(41)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142