Citation: Feng Li-dong, Xiang Sheng, Sun Bin, Liu Yan-long, Sun Zhi-qiang, Bian Xin-chao, Li Gao, Chen Xue-si. Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate[J]. Chinese Journal of Polymer Science, ;2016, 34(9): 1070-1078. doi: 10.1007/s10118-016-1822-4 shu

Thermal, Morphological, Mechanical and Aging Properties of Polylactide Blends with Poly(ether urethane) Based on Chain-extension Reaction of Poly(ethylene glycol) Using Diisocyanate

Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China

Corresponding author: Bian Xin-chao, xcbian@ciac.ac.cn Chen Xue-si, xschen@ciac.ac.cn
Received Date: 29 March 2016
Revised Date: 24 April 2016
Accepted Date: 24 April 2016

Fund Project: the National High Technology Research and Development Program ("863" Program) of China No. 2015AA034004he National Natural Science Foundation of China Nos. 51573178, 51390480,51203155, 51403199 and 51303176

Poly(ether urethane)s (PEU), including PEUI15 and PEUH15, were prepared through chain-extension reaction of poly(ethylene glycol) (PEG-1500) using diisocyanate as a chain extender, including isophorone diisocyanate (IPDI) and hexamethylene diisocyanate (HDI). These PEUs were used to toughen polylactide (PLA) by physical and reactive blending. Thermal, morphological, mechanical and aging properties of the blends were investigated in detail. These PEUs were partially compatible with PLA. The elongation at break of the reactive blends in the presence of triphenyl phosphate (TPP) for PLA with PEUH15 or PEUI15 was much higher than that of the physical blends. The aging test was carried out at-20℃ for 50h in order to accelerate the crystallization of PEUs. The PEUs in the PLA/PEU blends produced crystallization and formed new phase separation with PLA, resulting in the declined toughness of blends. Fortunately, under the aging condition, although PEUH15 in blends could also form crystallization, the reactive blend of PLA/PEUH15/TPP(80/20/2) had higher toughness than the other blends. The elongation at break of PLA/PEUH15/TPP(80/20/2) dropped to 287% for the aging blend from 350% for the original blend. The tensile strength and modulus of PLA/PEUH15/TPP blend did not change obviously because of the crystallization of PEUH15.
- Polylactide,
- Poly(ethylene glycol),
- Poly(ether urethane),
- Toughness,
- Aging
1. [1]
  Datta, R. and Henry, M., J. Chem. Technol. Biotechnol., 2006, 81(7): 1119 doi: 10.1002/(ISSN)1097-4660
2. [2]
  Weber, C.J., Haugaard, V., Festersen, R. and Bertelsen, G., Food Addit. Contam., 2002, 19(S): 172
3. [3]
  Kimura, K. and Horikoshi, Y., Fujitsu Sci. Tech. J., 2005, 41(2): 173
4. [4]
  Serizawa, S., Inoue, K. and Iji, M., J. Appl. Polym. Sci., 2006, 100(1): 618 doi: 10.1002/(ISSN)1097-4628
5. [5]
  Sheth, M., Kumar, R.A., Dave, V., Gross, R.A. and McCarthy, S.P., J. Appl. Polym. Sci., 1997, 66(8): 1495 doi: 10.1002/(ISSN)1097-4628
6. [6]
  Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K. and Wintermantel, E., J. Appl. Polym. Sci., 2003, 90(7): 1731 doi: 10.1002/(ISSN)1097-4628
7. [7]
  Martin, O. and Avérous, L., Polymer, 2001, 42(14): 6209 doi: 10.1016/S0032-3861(01)00086-6
8. [8]
  Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A. and Baer, E., Polymer, 2003, 44(19): 5681 doi: 10.1016/S0032-3861(03)00609-8
9. [9]
  Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A. and Baer, E., Polymer, 2003, 44(19): 5701 doi: 10.1016/S0032-3861(03)00614-1
10. [10]
  Hu, Y., Hu, Y.S., Topolkaraev, V., Hiltner, A. and Baer, E., Polymer, 2003, 44(19): 5711 doi: 10.1016/S0032-3861(03)00615-3
11. [11]
  Kulinski, Z. and Piorkowska, E., Polymer, 2005, 46(23): 10290 doi: 10.1016/j.polymer.2005.07.101
12. [12]
  Feng, L.D., Bian, X.C., Chen, Z.M., Li, G. and Chen, X.S., Polym. Degrad. Stab., 2013, 98 (9): 1591 doi: 10.1016/j.polymdegradstab.2013.06.025
13. [13]
  Deng, Y., Li, S.Q., Zhao, J.B., Zhang, Z.Y., Zhang, J.Y. and Yang, W.T., Chinese J. Polym. Sci., 2015, 33(6): 880 doi: 10.1007/s10118-015-1638-7
14. [14]
  Song, N.J., Jiang, X., Li, J.H., Pang, Y., Li, J.S., Tan, H. and Fu, Q., Chinese J. Polym. Sci., 2013, 31(10): 1451 doi: 10.1007/s10118-013-1315-7
15. [15]
  Yu, R.L., Zhang, L.S., Feng, Y.H., Zhang, R.Y. and Zhu, J., Chinese J. Polym. Sci., 2014, 32(8): 1099 doi: 10.1007/s10118-014-1487-9
16. [16]
  Xing, Q., Li, R.B., Dong, X., Zhang, X.Q., Zhang, L.Y. and Wang, D.J., Chinese J. Polym. Sci., 2015, 33(9): 1294 doi: 10.1007/s10118-015-1679-y
17. [17]
  Feng, L.D., Bian, X.C., Cui, Y., Chen, Z.M., Li, G. and Chen, X.S., Macromol. Chem. Phys., 2013, 214(7): 824 doi: 10.1002/macp.v214.7
18. [18]
  Nijenhuis, A.J., Colstee, E., Grijpma, D.W. and Pennings, A.J., Polymer, 1996, 37(26): 5849 doi: 10.1016/S0032-3861(96)00455-7
19. [19]
  Feng, L.D., Bian, X.C., Li, G., Chen, Z.M., Cui, Y. and Chen, X.S., Polym. Test., 2013, 32(8): 1368 doi: 10.1016/j.polymertesting.2013.08.015
1. [1]
  Zihong Li , Jie Cheng , Ping Huang , Guoliang Wu , Weiying Lin . Activatable photoacoustic bioprobe for visual detection of aging in vivo. Chinese Chemical Letters, 2024, 35(4): 109153-. doi: 10.1016/j.cclet.2023.109153
2. [2]
  Haojie Song , Laiyu Luo , Siyu Wang , Guo Zhang , Baojiang Jiang . Advances in poly(heptazine imide)/poly(triazine imide) photocatalyst. Chinese Chemical Letters, 2024, 35(10): 109347-. doi: 10.1016/j.cclet.2023.109347
3. [3]
  Xiaoxiao Huang , Zhi-Long He , Yangpeng Chen , Lei Li , Zhenyu Yang , Chunyang Zhai , Mingshan Zhu . Novel P-doping-tuned Pd nanoflowers/S,N-GQDs photo-electrocatalyst for high-efficient ethylene glycol oxidation. Chinese Chemical Letters, 2024, 35(6): 109271-. doi: 10.1016/j.cclet.2023.109271
4. [4]
  Weijian Zhang , Xianyu Deng , Liying Wang , Jian Wang , Xiuting Guo , Lianggui Huang , Xinyi Wang , Jun Wu , Linjia Jiang . Poly(ferulic acid) nanocarrier enhances chemotherapy sensitivity of acute myeloid leukemia by selectively targeting inflammatory macrophages. Chinese Chemical Letters, 2024, 35(9): 109422-. doi: 10.1016/j.cclet.2023.109422
5. [5]
  Chen Lian , Si-Han Zhao , Hai-Lou Li , Xinhua Cao . A giant Ce-containing poly(tungstobismuthate): Synthesis, structure and catalytic performance for the decontamination of a sulfur mustard simulant. Chinese Chemical Letters, 2024, 35(10): 109343-. doi: 10.1016/j.cclet.2023.109343
6. [6]
  Zhili Li , Qijun Wo , Dongdong Huang , Dezhong Zhou , Lei Guo , Yeqing Mao . Improving gene transfection efficiency of highly branched poly(β-amino ester)s through the in-situ conversion of inactive terminal groups. Chinese Chemical Letters, 2024, 35(8): 109737-. doi: 10.1016/j.cclet.2024.109737
7. [7]
  Zhenchun Yang , Bixiao Guo , Zhenyu Hu , Kun Wang , Jiahao Cui , Lina Li , Chun Hu , Yubao Zhao . Molecular engineering towards dual surface local polarization sites on poly(heptazine imide) framework for boosting H₂O₂ photo-production. Chinese Chemical Letters, 2024, 35(8): 109251-. doi: 10.1016/j.cclet.2023.109251
8. [8]
  Hailong He , Wenbing Wang , Wenmin Pang , Chen Zou , Dan Peng . Double stimulus-responsive palladium catalysts for ethylene polymerization and copolymerization. Chinese Chemical Letters, 2024, 35(7): 109534-. doi: 10.1016/j.cclet.2024.109534
9. [9]
  Fangzhou Wang , Wentong Gao , Chenghui Li . A weak but inert hindered urethane bond for high-performance dynamic polyurethane polymers. Chinese Chemical Letters, 2024, 35(5): 109305-. doi: 10.1016/j.cclet.2023.109305
10. [10]
  Xiao Zhu , Yanbing Mo , Jiawei Chen , Gaopan Liu , Yonggang Wang , Xiaoli Dong . A weakly-solvated ether-based electrolyte for fast-charging graphite anode. Chinese Chemical Letters, 2024, 35(8): 109146-. doi: 10.1016/j.cclet.2023.109146
11. [11]
  Junying Zhang , Ruochen Li , Haihua Wang , Wenbing Kang , Xing-Dong Xu . Photo-induced tunable luminescence from an aggregated amphiphilic ethylene-pyrene derivative in aqueous media. Chinese Chemical Letters, 2024, 35(6): 109216-. doi: 10.1016/j.cclet.2023.109216

Get Citation

PDF

XML

Metrics

PDF Downloads(0)
Abstract views(573)
HTML views(1)

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Address：Zhongguancun North First Street 2,100190 Beijing, PR China Tel: +86-010-82449177-888

DownLoad: Full-Size Img PowerPoint

Return