ZrO2包覆高镍LiNi0.8Co0.1Mn0.1O2正极材料提高其循环稳定性的作用机理

引用本文: 苏岳锋, 张其雨, 陈来, 包丽颖, 卢赟, 陈实, 吴锋. ZrO₂包覆高镍LiNi_0.8Co_0.1Mn_0.1O₂正极材料提高其循环稳定性的作用机理[J]. 物理化学学报, 2021, 37(3): 200506. doi: 10.3866/PKU.WHXB202005062 shu

Citation: Su Yuefeng, Zhang Qiyu, Chen Lai, Bao Liying, Lu Yun, Chen Shi, Wu Feng. Effects of ZrO₂ Coating on Ni-Rich LiNi_0.8Co_0.1Mn_0.1O₂ Cathodes with Enhanced Cycle Stabilities[J]. Acta Physico-Chimica Sinica, 2021, 37(3): 200506. doi: 10.3866/PKU.WHXB202005062 shu

ZrO₂包覆高镍LiNi_0.8Co_0.1Mn_0.1O₂正极材料提高其循环稳定性的作用机理

苏岳锋 ^1,2, ,
张其雨 ^1,2, ,
陈来 ^{1,2,
,} ,
包丽颖 ^1, ,
卢赟 ^1,2, ,
陈实 ^1, ,
吴锋 ^{1,2,
,}

1.
北京理工大学材料学院，环境科学与工程北京市重点实验室，北京 100081
2.
北京理工大学重庆创新中心，重庆 401120

通讯作者: 陈来, chenlai144@sina.com; 吴锋, wufeng863@vip.sina.com

基金项目:

国家重点研发项目(2016YFB0100301), 国家自然科学基金(21875022, 51802020, U1664255), 北京理工大学重庆创新中心科技创新计划项目(2020CX5100006), 北京理工大学“青年教师学术启动计划”项目和中国科学技术协会青年人才托举计划(2018QNRC001)资助

摘要: 高镍三元材料作为一种锂离子电池正极材料，因其较高的放电比容量而得到科学界和工业界的广泛关注。研究表明，高镍三元材料的比容量与材料中的Ni含量呈正相关，但Ni含量的增加也会加剧循环过程中的界面副反应，材料表面释氧以及结构转变等问题。本文采用ZrO₂包覆LiNi_0.8Co_0.1Mn_0.1O₂材料，利用X射线衍射证明，在高温处理下ZrO₂包覆物中的Zr⁴⁺会掺杂进LiNi_0.8Co_0.1Mn_0.1O₂材料表面晶格中，使得X射线衍射谱中的(003)衍射峰左移。电化学测试证明在4.3和4.5 V的截止电压下，改性最优的材料在1C循环100周后容量保持率分别从84.89%和75.60%提高到97.61%和81.37%，同时发现循环稳定性的提升主要来自材料表面的Zr⁴⁺掺杂。X射线光电子能谱证明Zr⁴⁺表层掺杂后材料的Ni化合价由Ni³⁺向Ni²⁺转变，透射电子显微镜观察到Zr⁴⁺的表层掺杂使得材料表面的层状结构发生重构，从而稳定了材料体相结构，提高了材料整体的循环稳定性。

关键词:

English

Effects of ZrO₂ Coating on Ni-Rich LiNi_0.8Co_0.1Mn_0.1O₂ Cathodes with Enhanced Cycle Stabilities

Su Yuefeng ^1,2, ,
Zhang Qiyu ^1,2, ,
Chen Lai ^{1,2,
,} ,
Bao Liying ^1, ,
Lu Yun ^1,2, ,
Chen Shi ^1, ,
Wu Feng ^{1,2,
,}

1.
School of Materials Science and Engineering, Beijing Key Laboratory of Environmental Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
2.
Beijing Institute of Technology Chongqing Innovation Center, Chongqing 401120, China

Corresponding author: Email: chenlai144@sina.com (L.C.); Email: wufeng863@vip.sina.com (F.W.)

Received Date: 25 May 2020
Accepted Date: 08 June 2020
Revised Date: 02 June 2020
Available Online: 15 March 2021
Fund Project:

The project was supported by the National Key R&D Program of China (2016YFB0100301), the National Natural Science Foundation of China (21875022, 51802020, U1664255), the Science and Technology Innovation Foundation of Beijing Institute of Technology Chongqing Innovation Center, China (2020CX5100006), the Beijing Institute of Technology Research Fund Program for Young Scholars, and the Young Elite Scientists Sponsorship Program by CAST, China (2018QNRC001)

Abstract: With the development of electric vehicles (EVs) and hybrid electric vehicles (HEVs), the demand for lithium ion power batteries with high energy density and long cycle life has continuously increased in the recent years. According to the "Made in China 2025" plan, the energy densities of lithium ion batteries need to reach 300 Wh·kg^-1 in 2020. Due to their high discharge capacities and work voltages, Ni-rich layered materials have attracted considerable attention from the science and industry fields as one of the most promising cathodes to achieve high energy density. According to previous reports, the discharge capacities of Ni-rich cathodes were positively correlated to their Ni content. However, the increased Ni content can aggravate the side reactions between the cathode and electrolyte, induce O loss, and trigger structural transformation from the surface to bulk. In this study, ZrO₂ was coated on LiNi_0.8Co_0.1Mn_0.1O₂ with a simple wet chemical method to improve its cycle performance. The scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) demonstrated that Zr was only detected in the ZrO₂-coated samples and was mainly distributed at the surface of the secondary particles of the LiNi_0.8Co_0.1Mn_0.1O₂ cathodes. The X-ray diffraction (XRD) indicated that Zr⁴⁺ in ZrO₂ migrated into the layered surface structure of LiNi_0.8Co_0.1Mn_0.1O₂ based on the shift of the (003) peak to a lower angle, which was considered as a lattice expansion along the c axis. Under the cut-off voltage of 4.3 and 4.5 V, the capacity retentions of the LiNi_0.8Co_0.1Mn_0.1O₂ cathodes improved from 84.89 to 97.61% and 75.60 to 81.37%, respectively, after 100 cycles at 1C. This was mainly attributed to the doped Zr⁴⁺ in surface structure as opposed to the ZrO₂ coating. The X-ray photoelectron spectroscopy (XPS) indicated that the Ni³⁺ at the surface of LiNi_0.8Co_0.1Mn_0.1O₂ was reduced to Ni²⁺ after the Zr⁴⁺ surface doping due to charge balance. Rietveld refinement also indicated that the Li⁺/Ni²⁺ cation disordering improved after the Zr⁴⁺ in ZrO₂ doped into NCM surface structure. The raised cation disordering may be triggered by the increased content of Ni²⁺ and their migration into Li layers due to the similar ion radius of Li⁺ (0.076 nm) and Ni²⁺ (0.069 nm). A structure-reconstructed layer at the surface of LiNi_0.8Co_0.1Mn_0.1O₂ was formed after the Zr⁴⁺ doping, which had been confirmed by transmission electron microscope (TEM). It was determined that this structure-reconstructed layer can hinder the side reactions at the interface and stabilize the bulk structure during cycles; thus, the cycle stability of LiNi_0.8Co_0.1Mn_0.1O₂ material was improved.

Key words:

1. [1]
  Chen, Z.; Qin, Y.; Amine, K.; Sun, Y. K. J. Mater. Chem. 2010, 20, 7606. doi: 10.1039/c0jm00154f
2. [2]
  Kim, H. R.; Woo, S. G.; Kim, J. H.; Cho, W.; Kim, Y. J. J. Electroanal. Chem. 2016, 782, 168. doi: 10.1016/j.jelechem.2016.10.032
3. [3]
  Li, W.; Song, B.; Manthiram, A. Chem. Soc. Rev. 2017, 46, 3006. doi: 10.1039/c6cs00875e
4. [4]
  王昭, 吴锋, 苏岳锋, 包丽颖, 陈来, 李宁, 陈实.物理化学学报, 2012, 28, 823. doi: 10.3866/PKU.WHXB201202102Wang, Z.; Wu, F.; Su, Y.; Bao, L.; Chen, L.; Li, N.; Chen, S. Acta Phys. -Chim. Sin. 2012, 28, 823. doi: 10.3866/PKU.WHXB201202102
5. [5]
  Liu, W.; Oh, P.; Liu, X.; Lee, M. J.; Cho, W.; Chae, S.; Kim, Y.; Cho, J. Angew. Chem. Int. Ed. 2015, 54, 4440. doi: 10.1002/anie.201409262
6. [6]
  Chen, L.; Su, Y.; Chen, S.; Li, N.; Bao, L.; Li, W.; Wang, Z.; Wang, M.; Wu, F. Adv. Mater. 2014, 26, 6756. doi: 10.1002/adma.201402541
7. [7]
  陈来, 陈实, 胡道中, 苏岳锋, 李维康, 王昭, 包丽颖, 吴锋.物理化学学报, 2014, 30, 467. doi: 10.3866/PKU.WHXB201312252Chen, L.; Chen, S.; Hu, D.; Su, Y.; Li, W.; Wang, Z.; Bao, L.; Wu, F. Acta Phys. -Chim. Sin. 2014, 30, 467. doi: 10.3866/PKU.WHXB201312252
8. [8]
  Ando, K.; Yamada, Y.; Nishikawa, K.; Matsuda, T.; Imamura, D.; Kanamura, K. ACS Appl. Energy Mater. 2018, 1, 4536. doi: 10.1021/acsaem.8b00612
9. [9]
  Manthiram, A.; Song, B.; Li, W. Energy Storage Mater. 2017, 6, 125. doi: 10.1016/j.ensm.2016.10.007
10. [10]
  Myung, S. T.; Amine, K.; Sun, Y. K. J. Mater. Chem. 2010, 20, 7074. doi: 10.1039/c0jm00508h
11. [11]
  寇建文, 王昭, 包丽颖, 苏岳锋, 胡宇, 陈来, 徐少禹, 陈芬, 陈人杰, 孙逢春, 吴锋.物理化学学报, 2016, 32, 717. doi: 10.3866/PKU.WHXB201512301Kou, J.; Wang, Z.; Bao, L.; Su, Y.; Hu, Y.; Chen, L.; Xu, S.; Chen, F.; Chen, R.; Sun, F.; Wu, F. Acta Phys. -Chim. Sin. 2016, 32, 717. doi: 10.3866/PKU.WHXB201512301
12. [12]
  Cho, W.; Myeong, S.; Kim, N.; Lee, S.; Kim, Y.; Kim, M.; Kang, S. J.; Park, N.; Oh, P.; Cho, J. Adv. Mater. 2017, 29, 1605578. doi: 10.1002/adma.201605578
13. [13]
  Li, L.; Xu, M.; Yao, Q.; Chen, Z.; Song, L.; Zhang, Z.; Gao, C.; Wang, P.; Yu, Z.; Lai, Y. ACS Appl. Mater. Interfaces 2016, 8, 30879. doi: 10.1021/acsami.6b09197
14. [14]
  Schipper, F.; Bouzaglo, H.; Dixit, M.; Erickson, E. M.; Weigel, T.; Talianker, M.; Grinblat, J.; Burstein, L.; Schmidt, M.; Lampert, J.; Erk, C.; Markovsky, B.; Major, D. T.; Aurbach, D. Adv. Energy Mater. 2018, 8, 1701682. doi: 10.1002/aenm.201701682
15. [15]
  Wu, N.; Wu, H.; Kim, J. K.; Liu, X.; Zhang, Y. ChemElectroChem 2018, 5, 78. doi: 10.1002/celc.201700979
16. [16]
  Zheng, J.; Zheng, J. X.; Liu, T. C.; Hu, Z. X.; Wei, Y.; Song, X. H.; Ren, Y.; Wang, W. D.; Rao, M. M.; Lin, Y.; et al. J. Am. Chem. Soc. 2016, 138, 13326. doi: 10.1021/jacs.6b07771
17. [17]
  Zheng, J.; Ye, Y.; Liu, T.; Xiao, Y.; Wang, C.; Wang, F.; Pan, F. Acc. Chem. Res. 2019, 52, 2201. doi: 10.1021/acs.accounts.9b00033
18. [18]
  卢华权, 吴锋, 苏岳锋, 李宁, 陈实, 包丽颖.物理化学学报, 2010, 26, 51. doi: 10.3866/PKU.WHXB20100112Lu, H. Q.; Wu, F.; Su, Y. F.; Li, N.; Chen, S.; Bao, L. Y. Acta Phys. -Chim. Sin. 2010, 26, 51. doi: 10.3866/PKU.WHXB20100112
19. [19]
  Dixit, M.; Markovsky, B.; Schipper, F.; Aurbach, D.; Major, D. T. J. Phys. Chem. C 2017, 121, 22628. doi: 10.1021/acs.jpcc.7b06122
20. [20]
  Jung, R.; Metzger, M.; Maglia, F.; Stinner, C.; Gasteiger, H. A. J. Electrochem. Soc. 2017, 164, A1361. doi: 10.1149/2.0021707jes
21. [21]
  Evertz, M.; Horsthemke, F.; Kasnatscheew, J.; Börner, M.; Winter, M.; Nowak, S. J. Power Sources 2016, 329, 364. doi: 10.1016/j.jpowsour.2016.08.099
22. [22]
  Zheng, J.; Xiao, J.; Zhang, J. G. Nano Today 2016, 11, 678. doi: 10.1016/j.nantod.2016.08.011
23. [23]
  Sun, H. H.; Manthiram, A. Chem. Mater. 2017, 29, 8486. doi: 10.1021/acs.chemmater.7b03268
24. [24]
  Zhang, Q.; Su, Y.; Chen, L.; Lu, Y.; Bao, L.; He, T.; Wang, J.; Chen, R.; Tan, J.; Wu, F. J. Power Sources 2018, 396, 734. doi: 10.1016/j.jpowsour.2018.06.091
25. [25]
  Chen, S.; He, T.; Su, Y.; Lu, Y.; Bao, L.; Chen, L.; Zhang, Q.; Wang, J.; Chen, R.; Wu, F. ACS Appl. Mater. Interfaces 2017, 9, 29732. doi: 10.1021/acsami.7b08006
26. [26]
  Jo, C. H.; Cho, D. H.; Noh, H. J.; Yashiro, H.; Sun, Y. K.; Myung, S. T. Nano Res. 2014, 8, 1464. doi: 10.1007/s12274-014-0631-8
27. [27]
  Meng, K.; Wang, Z.; Guo, H.; Li, X.; Wang, D. Electrochim. Acta 2016, 211, 822. doi: 10.1016/j.electacta.2016.06.110
28. [28]
  Zhao, E.; Chen, M.; Hu, Z.; Chen, D.; Yang, L.; Xiao, X. J. Power Sources 2017, 343, 345. doi: 10.1016/j.jpowsour.2017.01.066
29. [29]
  王萌, 吴锋, 苏岳锋, 陈实.物理化学学报, 2008, 24, 1175. doi: 10.3866/PKU.WHXB20080710Wang, M.; Wu, F.; Su, Y. F.; Chen, S. Acta Phys. -Chim. Sin. 2008, 24, 1175. doi: 10.3866/PKU.WHXB20080710
30. [30]
  吴锋, 王萌, 苏岳锋, 陈实.物理化学学报, 2009, 25, 629. doi: 10.3866/PKU.WHXB20090411Wu, F.; Wang, M.; Su, Y. F.; Chen, S. Acta Phys. -Chim. Sin. 2009, 25, 629. doi: 10.3866/PKU.WHXB20090411
31. [31]
  Mudit, D.; Boris, M.; Doron, A.; Dan, T. M. J. Electrochem. Soc. 2017, 164, A6359. doi: 10.1149/2.0561701jes
32. [32]
  Woo, S. W.; Myung, S. T.; Bang, H.; Kim, D. W.; Sun, Y. K. Electrochim. Acta 2009, 54, 3851. doi: 10.1016/j.electacta.2009.01.048
33. [33]
  Wu, F.; Liu, N.; Chen, L.; Su, Y.; Tan, G.; Bao, L.; Zhang, Q.; Lu, Y.; Wang, J.; Chen, S.; Tan, J. Nano Energy 2019, 59, 50. doi: 10.1016/j.nanoen.2019.02.027
34. [34]
  Xia, L.; Qiu, K.; Gao, Y.; He, X.; Zhou, F. J. Mater. Sci. Technol. 2015, 50, 2914. doi: 10.1007/s10853-015-8856-9
35. [35]
  Yang, Z.; Guo, X.; Xiang, W.; Hua, W.; Zhang, J.; He, F.; Wang, K.; Xiao, Y.; Zhong, B. J. Alloys Compd. 2017, 699, 358. doi: 10.1016/j.jallcom.2016.11.245
36. [36]
  Xu, X.; Jian, J.; Xiang, L.; Wang, L.; He, X.; Yin, G.; Du, C. Electrochim. Acta 2019, 317, 459. doi: 10.1016/j.electacta.2019.06.016
37. [37]
  Liu, D.; Liu, S.; Zhang, C.; You, L.; Huang, T.; Yu, A. ACS Sustain. Chem. Eng. 2019, 7, 10661. doi: 10.1021/acssuschemeng.9b01312
38. [38]
  Cho, Y.; Oh, P.; Cho, J. Nano Lett. 2013, 13, 1145. doi: 10.1021/nl304558t
39. [39]
  Kim, J.; Cho, H.; Jeong, H. Y.; Ma, H.; Lee, J.; Hwang, J.; Park, M.; Cho, J. Adv. Energy Mater. 2017, 7, 1602559. doi: 10.1002/aenm.201602559
40. [40]
  Kim, J.; Ma, H.; Cha, H.; Lee, H.; Sung, J.; Seo, M.; Oh, P.; Park, M.; Cho, J. Energy Environ. Sci. 2018, 11, 1449. doi: 10.1039/c8ee00155c

扫一扫看文章

计量

PDF下载量: 24
文章访问数: 2018
HTML全文浏览量: 179

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

ZrO₂包覆高镍LiNi_0.8Co_0.1Mn_0.1O₂正极材料提高其循环稳定性的作用机理

通讯作者: 陈来, chenlai144@sina.com; 吴锋, wufeng863@vip.sina.com

English

Effects of ZrO₂ Coating on Ni-Rich LiNi_0.8Co_0.1Mn_0.1O₂ Cathodes with Enhanced Cycle Stabilities

Corresponding author: Email: chenlai144@sina.com (L.C.); Email: wufeng863@vip.sina.com (F.W.)

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处