Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

Citation: Ting-yang Dai, Hong-juan Wang, Yi Cao, Yun Lu. Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films[J]. Chinese Journal of Polymer Science, 2015, 33(5): 732-742. doi: 10.1007/s10118-015-1628-9 shu

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

1.
Department of Polymer Science and Engineering, State Key Laboratory of Coordination Chemistry, Key Laboratory of High Performance Polymer Materials and Technology of Ministry of Education, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210093, China
基金项目:
This work was financially supported by the National Natural Science Foundation of China (Nos. 21174059, 21374046), China Postdoctoral Science Foundation (No. 2013M530249), Program for Changjiang Scholars and Innovative Research Teams in Universities, Open Project of State Key Laboratory of Superamolecular Structure and Materials (No. SKLSSM201416) and the Testing Foundation of Nanjing University.

摘要: Composites of polyaniline (PAn) and epoxide polysiloxane (EPSi) are reported for the first time. EPSi is designed, synthesized and N-grafted onto the PAn backbone through covalent bonds. As-prepared EPSi-g-PAn composites are soluble in organic solvents and the corresponding films can be easily produced via a simple solution-casting procedure. The composite films combine the mechanical characteristics of EPSi and the chemical properties of PAn, enabling the facile introduction of the noble metal particles. The successful fabrication of the composites is confirmed by the investigation of the molecular structure, crystalline structure and microstructure of the materials. The resulting composite films containing noble metal particles are employed as the catalysts for the hydrogenation of phenol to produce cyclohexanone, which exhibit the convenience and recyclability for usage as well as the high catalytic activities, including the conversion ratio of 97%-100% and the selectivity as high as 84%-98%. The present work not only provides a new method to improve the processability of the conducting polymers but also describes a kind of composite materials that may display outstanding preformances in industrial catalysis.

关键词:

English

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

1.
Department of Polymer Science and Engineering, State Key Laboratory of Coordination Chemistry, Key Laboratory of High Performance Polymer Materials and Technology of Ministry of Education, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210093, China
Received Date: 09 September 2014
Revised Date: 11 January 2015
Available Online: 05 May 2015
Fund Project:
This work was financially supported by the National Natural Science Foundation of China (Nos. 21174059, 21374046), China Postdoctoral Science Foundation (No. 2013M530249), Program for Changjiang Scholars and Innovative Research Teams in Universities, Open Project of State Key Laboratory of Superamolecular Structure and Materials (No. SKLSSM201416) and the Testing Foundation of Nanjing University.

Abstract: Composites of polyaniline (PAn) and epoxide polysiloxane (EPSi) are reported for the first time. EPSi is designed, synthesized and N-grafted onto the PAn backbone through covalent bonds. As-prepared EPSi-g-PAn composites are soluble in organic solvents and the corresponding films can be easily produced via a simple solution-casting procedure. The composite films combine the mechanical characteristics of EPSi and the chemical properties of PAn, enabling the facile introduction of the noble metal particles. The successful fabrication of the composites is confirmed by the investigation of the molecular structure, crystalline structure and microstructure of the materials. The resulting composite films containing noble metal particles are employed as the catalysts for the hydrogenation of phenol to produce cyclohexanone, which exhibit the convenience and recyclability for usage as well as the high catalytic activities, including the conversion ratio of 97%-100% and the selectivity as high as 84%-98%. The present work not only provides a new method to improve the processability of the conducting polymers but also describes a kind of composite materials that may display outstanding preformances in industrial catalysis.

Key words:

1. [1]
  Jaymand, M., Prog. Polym. Sci., 2013, 38: 1287
2. [2]
  Sarvi, A.,Chimello, V., Silva, A.B., Bretas, R.E.S. and Sundararaj, U., Polym. Compos., 2014, 35: 1198
3. [3]
  Lee, K., Cho, S., Park, S.H., Heeger, A.J., Lee, C.W. and Lee, S.H., Nature, 2006, 441: 65
4. [4]
  Dai, T.Y., Qing, X.T., Wang, J., Shen, C. and Lu, Y., Compos. Sci. Technol., 2010, 70: 498
5. [5]
  Stejskal, J. and Kratochvil, P., Langmuir, 1996, 12: 3389
6. [6]
  Nikpour, M., Chaouk, H., Mau, A., Chung, D.J. and Wallace, G., Synth. Met., 1999, 99: 121
7. [7]
  Niu, X.Z., Peng, S.L., Liu, L.Y., Wen, W.J. and Sheng, P., Adv. Mater., 2007, 19: 2682
8. [8]
  Jiang, X., Li, B.C., Song, Y.H., Gao, Z.L. and Nan, B.B., Chinese J. Polym. Sci., 2014, 32(1): 35
9. [9]
  Yang, D., Adams, P.N. and Brown, L., Synth. Met., 2006, 156: 1225
10. [10]
  Lu, X.F., Zhang, W.J., Wang, C., Wen, T.C. and Wei, Y., Prog. Polym. Sci., 2011, 36: 671
11. [11]
  Liu, Y.L., Ai, K.L. and Lu, L.H., Chem. Rev., 2014, 114: 5057
12. [12]
  Mark, J.E., Accounts Chem. Res., 2004, 37: 946
13. [13]
  Yoshimoto, A. and Takahiro, G.J., Prog. Polym. Sci., 2004, 29: 149
14. [14]
  Gan, L.H., Gan, Y.Y. and Yin, W.S., Polym. Int., 1999, 48: 1160
15. [15]
  Wang, H.J., Ni, T., Li, G. and Lu, Y., Synth. Met., 2013, 177: 52
16. [16]
  Zheng, W.Y. and Levon, K., Macromolecules, 1994, 27: 7754
17. [17]
  Yamaguchi, I., Yasuda, T. and Yamamoto, T., J. Mater. Chem., 2003, 13: 2138
18. [18]
  Prez, Y., Fajardo, M. and Corma, A., Catal. Commun., 2011, 12: 1071
19. [19]
  Lei, X.P. and Su, Z.X., Polym. Adv. Technol., 2007, 18: 472
20. [20]
  Putziena, S., Nuyken, O. and Khn, F.E., Prog. Polym. Sci., 2010, 35: 687
21. [21]
  Yamaguchi, I., Yasuda, T. and Yamamoto, T., J. Polym. Sci., Part A: Polym. Chem., 2001, 39: 3137
22. [22]
  Albuquerque, J.E., Mattoso, L.H.C., Balogh, D.T., Faria, R.M., Masters, J.G. and MacDiamid, A.G., Synth. Met., 2000, 113: 19
23. [23]
  Wang, Y., Du, X.S., Li, Y., Long, Y., Qiu, D., Tai, H.L., Tang, X.Z. and Jiang, Y.D., J. Appl. Polym. Sci., 2013, 130: 4516
24. [24]
  Zhang, L.J. and Wan, M.X., Nanotechnology, 2002, 13: 750
25. [25]
  Qiang, Z.X., Liang, G.Z., Gu, A.J. and Yuan, L., Mater. Lett., 2014, 115: 159
26. [26]
  Dai, T.Y. and Lu, Y., Eur. Polym. J., 2008, 44: 3417
27. [27]
  Bai, H., Chen, Q., Li, C., Lu, C. and Shi, G., Polymer, 2007, 48: 4015
28. [28]
  Liu, W.Q., Ma, S.Q, Wang, Z.F., Hu, C.H. and Tang, C.Y., Macromol. Res., 2010, 18: 853
29. [29]
  Mahata, N. and Vishwanathan, V., J. Mol. Catal. A Chem., 1997, 120: 267
30. [30]
  Chen, A.C. and Holt-Hindle, P., Chem. Rev., 2010, 110: 3767
31. [31]
  Likhar, P.R., Roy, M. and Roy, S., Adv. Synth. Catal., 2008, 350: 1968
32. [32]
  Gallon, B.J., Kojima, R.W., Kaner, R.B. and Diaconescu, P.L., Angew. Chem. Int. Ed., 2007, 46: 7251
33. [33]
  Yoshimoto, A. and Takahiro, G.J., Prog. Polym. Sci., 2004, 29: 49
34. [34]
  Mourato, A., Wong, S.M., Siegenthaler, H. and Abrantes, L.M., J. Solid State Electrochem., 2006, 10: 140
35. [35]
  He, D.P., Zeng, C., Xu, C. and Cheng, N.C., Langmuir, 2011, 27: 5582
36. [36]
  Dai, T.Y. and Lu, Y., Macromol. Rapid Commun., 2007, 28: 629
37. [37]
  Dai, T.Y. and Lu, Y., J. Mater. Chem., 2007, 17: 4797
38. [38]
  Sen, F. and Go1ka?ac, G., J. Phys. Chem. C, 2007, 111: 5715
39. [39]
  Stochmala, E., Hasika, M. and Turek, W., Polym. Adv. Technol., 2011, 22: 1067
40. [40]
  Tian, Z.Q., Jiang, S.P., Liang, Y.M. and Sten, P.K., J. Phys. Chem. B, 2006, 110: 5350
41. [41]
  Scirka, S., Crisafulli, C. and Maggiore, R., Appl. Surf. Sci., 1996, 93: 309
42. [42]
  Shore, S.G., Ding, E., Park, C. and Keane, M.A., Catal. Commun., 2002, 3: 77
43. [43]
  Daz, E., Mohedano, A.F. and Calvo, L., Chem. Eng. J., 2007, 131: 65
44. [44]
  Watanabe, S. and Arunajatesan, V., Top. Catal., 2010, 53: 1150
45. [45]
  Wang, H.J., Zhao, F.Y., Fujita, S.I. and Arai, M., Catal. Commun., 2008, 9: 362

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 990
HTML全文浏览量: 49

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

English

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

English

Preparation, Characterization and Application of Polyaniline/Epoxide Polysiloxane Composite Films

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs