中温固体氧化物燃料电池Pr1.2Sr0.8NiO4阴极材料的制备、结构和性能

引用本文: 杨俊芳, 程继贵, 樊玉萌, 王睿, 高建峰. 中温固体氧化物燃料电池Pr_1.2Sr_0.8NiO₄阴极材料的制备、结构和性能[J]. 物理化学学报, 2012, 28(01): 95-99. doi: 10.3866/PKU.WHXB201111161 shu

Citation: YANG Jun-Fang, CHENG Ji-Gui, FAN Yu-Meng, WANG Rui, GAO Jian-Feng. Preparation, Structure and Properties of Pr_1.2Sr_0.8NiO₄ Cathode Materials for Intermediate-Temperature Solid Oxide Fuel Cells[J]. Acta Physico-Chimica Sinica, 2012, 28(01): 95-99. doi: 10.3866/PKU.WHXB201111161 shu

中温固体氧化物燃料电池Pr_1.2Sr_0.8NiO₄阴极材料的制备、结构和性能

基金项目:
安徽省自然科学基金(070414186) (070414186)

安徽省科学攻关项目(2008AKKG0332) (2008AKKG0332)

材料科学与工程日本玻璃片基金(070304B2) (070304B2)

低维材料及其应用技术教育部重点实验室开放基金(DWKF0802)资助 (DWKF0802)

摘要: 以相应的氧化物粉末和盐为原料, 通过甘氨酸-硝酸盐法合成出了中温固体氧化物燃料电池(IT-SOFC)Pr_1.2Sr_0.8NiO₄ (PSNO)阴极原料粉体, 并制备出了烧结体试样. 采用X射线衍射(XRD)分析对所合成粉体的相组成进行了分析, 分别采用热膨胀仪和四端子法对PSNO烧结体试样的热膨胀系数和电导率进行了测定, 同时对该阴极材料与Sm_0.2Ce_0.8O_1.9 (SCO)电解质材料的电化学阻抗谱(EIS)进行了测试分析. 以SCO作电解质, 分别以NiO/SCO和PSNO作阳极和阴极材料, 制备出固体氧化物燃料单电池, 并对其性能进行测试. 实验结果表明, 通过甘氨酸-硝酸盐法, 在1050 °C 以上煅烧前驱体, 可以获得具有K₂NiF₄结构的PSNO粉体. 所制备的PSNO烧结体试样在200-800 °C 间的热膨胀系数约为12×10^-6 K^-1, 在450 °C下的电导率约为155 S·cm^-1, 在400-800 °C, 平均电导活化能为0.034 eV. 电化学阻抗谱分析结果表明, 在700 °C下PSNO阴极和SCO电解质间的比表面阻抗(ASR)为0.37 Ω·cm², 而Ni-SCO/SCO/PSNO 单电池的比表面阻抗为0.61 Ω·cm²; 所制备的SOFC单电池在800 °C下的输出功率为288 mW·cm^-2, 开路电压为0.75 V. 本研究的初步结果表明PSNO材料是一种综合性能较为优良的新型中温固体氧化物燃料电池阴极材料.

关键词:

English

Preparation, Structure and Properties of Pr_1.2Sr_0.8NiO₄ Cathode Materials for Intermediate-Temperature Solid Oxide Fuel Cells

1.
1. School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, P. R. China;
2. Department of Material Science and Engineering, University of Science and Technology of China, Hefei 230026, P. R. China
Received Date: 29 July 2011
Available Online: 29 December 2011
Fund Project:
安徽省自然科学基金(070414186)

安徽省科学攻关项目(2008AKKG0332)

材料科学与工程日本玻璃片基金(070304B2)

低维材料及其应用技术教育部重点实验室开放基金(DWKF0802)资助

Abstract: Pr_1.2Sr_0.8NiO₄ (PSNO) cathode material for an intermediate-temperature solid oxide fuel cell (IT-SOFC) was synthesized by a glycine-nitrate process. The phase structure of the synthesized powders was characterized by X-ray diffraction (XRD) analysis. The thermal expansion coefficient (TEC) and the electrical conductivity of the sintered PSNO samples were measured. Electrochemical impedance spectroscopy (EIS) measurements of the PSNO materials were carried out using an electrochemical workstation. Single cells based on the Sm_0.2Ce_0.8O_1.9 (SCO) electrolyte were also assembled and tested. The results show that PSNO materials with a K₂NiF₄-type structure can be obtained by calcining the precursors at temperatures higher than 1050 °C. The sintered PSNO samples have an average TEC of about 12×10^-6 K^-1 within 200-800 °C, an electrical conductivity of 155 S·cm^-1 at 450 °C and an average conduction activation energy of 0.034 eV at 400-800 °C. Electrochemical impedance spectroscopy (EIS) shows that the area specific resistance (ASR) of the PSNO cathode on the SCO electrolyte is 0.37 Ω·cm² and the ASR of the single Ni-SCO/SCO/PSNO cell is 0.61 Ω·cm² at 700 ° C. The single Ni-SCO/SCO/ PSNO cell produces a power density of 288 mW·cm^-2 and an open circuit voltage of 0.75 V at 800 °C. Preliminary work showed that the PSNO materials may be a potential cathode material for use in IT-SOFC.

Key words:

Intermediate temperature solid oxide fuel cell
/ PSNO cathode material
/ Glycinenitrate process
/ Thermal expansion coefficient
/ Electrochemical performance

1. [1]
  (1) Ardigò, M. R.; Perron, A.; Combemale, L.; Heintz, O.; Caboche, G.; Chevalier, S. J. Power Sources 2011, 196, 2037. (1) Ardigò, M. R.; Perron, A.; Combemale, L.; Heintz, O.; Caboche, G.; Chevalier, S. J. Power Sources 2011, 196, 2037.
2. [2]
  (2) Tu, H. Y.; Stimming, U. J. Power Sources 2004, 127, 284. (2) Tu, H. Y.; Stimming, U. J. Power Sources 2004, 127, 284.
3. [3]
  (3) Chiba, R.; Yoshimura, F.; Sakurai, Y. Solid State Ionics 1999, 124, 281. (3) Chiba, R.; Yoshimura, F.; Sakurai, Y. Solid State Ionics 1999, 124, 281.
4. [4]
  (4) Liu, Y.; Rauch,W.; Zha, S.W.; Liu, M. L. Solid State Ionics 2004, 166, 261. (4) Liu, Y.; Rauch,W.; Zha, S.W.; Liu, M. L. Solid State Ionics 2004, 166, 261.
5. [5]
  (5) Santillán, M. J.; Caneiro, A.; Quaranta, N.; Boccaccini, A. R. J. Eur. Ceram. Soc. 2009, 29, 1125. (5) Santillán, M. J.; Caneiro, A.; Quaranta, N.; Boccaccini, A. R. J. Eur. Ceram. Soc. 2009, 29, 1125.
6. [6]
  (6) Kim, Y. M.; Kim-Lohsoontorn, P.; Baek, S.W.; Bae, J. Int. J. Hydrog. Energy 2011, 36, 3138. (6) Kim, Y. M.; Kim-Lohsoontorn, P.; Baek, S.W.; Bae, J. Int. J. Hydrog. Energy 2011, 36, 3138.
7. [7]
  (7) Amow, G.; Whitfield, P. S.; Davidson, I. J.; Hammond, R. P.; Munnings, C. N.; Skinner, S. J. Ceram. Int. 2004, 30, 1635. (7) Amow, G.; Whitfield, P. S.; Davidson, I. J.; Hammond, R. P.; Munnings, C. N.; Skinner, S. J. Ceram. Int. 2004, 30, 1635.
8. [8]
  (8) Al Daroukh, M.; Vashook, V. V.; Ullmann, H.; Tietz, F.; Arual Raj, I. Solid State Ionics 2003, 158, 141. (8) Al Daroukh, M.; Vashook, V. V.; Ullmann, H.; Tietz, F.; Arual Raj, I. Solid State Ionics 2003, 158, 141.
9. [9]
  (9) Skinner, S. J .; Kilner, J. A. Solid State Ionics 2000, 135, 709. (9) Skinner, S. J .; Kilner, J. A. Solid State Ionics 2000, 135, 709.
10. [10]
  (10) Boehm, E.; Bassat, J. M.; Steil, M. C.; Dordor, P.; Mauvy, F.; Grenier, J. C. Solid State Sci. 2003, 5, 973. (10) Boehm, E.; Bassat, J. M.; Steil, M. C.; Dordor, P.; Mauvy, F.; Grenier, J. C. Solid State Sci. 2003, 5, 973.
11. [11]
  (11) Caronna, T.; Fontana, F.; Sora, I. N.; Pelosato, R.; Viganò, L. Solid State Ionics 2010, 181, 1355. (11) Caronna, T.; Fontana, F.; Sora, I. N.; Pelosato, R.; Viganò, L. Solid State Ionics 2010, 181, 1355.
12. [12]
  (12) Ding, X. F.; Kong, X.; Jiang, J. G.; Cui, C. Int. J. Hydrog. Energy 2009, 34, 6869. (12) Ding, X. F.; Kong, X.; Jiang, J. G.; Cui, C. Int. J. Hydrog. Energy 2009, 34, 6869.
13. [13]
  (13) Huang, X. Q.; Zhang, F. M. J. Phys. Chem. Solids 2009, 70, 665. (13) Huang, X. Q.; Zhang, F. M. J. Phys. Chem. Solids 2009, 70, 665.
14. [14]
  (14) Cheng, J. G.; Jiang Q. M.; He, H. G.; Yang, J. F.;Wang, Y. F.; Gao, J. F. Mater. Chem. Phys. 2011, 125, 704. (14) Cheng, J. G.; Jiang Q. M.; He, H. G.; Yang, J. F.;Wang, Y. F.; Gao, J. F. Mater. Chem. Phys. 2011, 125, 704.
15. [15]
  (15) Zheng, Y. F.; He, S. C.; Ge, L.; Zhou, M.; Chen, H.; Guo, L. C. Int. J. Hydrogen Energy 2011, 36 , 5128. (15) Zheng, Y. F.; He, S. C.; Ge, L.; Zhou, M.; Chen, H.; Guo, L. C. Int. J. Hydrogen Energy 2011, 36 , 5128.
16. [16]
  (16) Nie, H.W.;Wen, T. L.;Wang, S. R.;Wang, Y. S.; Guth, U.; Vashook, V. Solid State Ionics 2006, 177, 1929. (16) Nie, H.W.;Wen, T. L.;Wang, S. R.;Wang, Y. S.; Guth, U.; Vashook, V. Solid State Ionics 2006, 177, 1929.
17. [17]
  (17) Lv, H.;Wu, Y. J.; Huang, B.; Zhao, B. Y.; Hu, K. A. Solid State Ionics 2006, 177, 901. (17) Lv, H.;Wu, Y. J.; Huang, B.; Zhao, B. Y.; Hu, K. A. Solid State Ionics 2006, 177, 901.
18. [18]
  (18) Horita, T.; Yamaji, K.; Sakai, N.; Yokokawa, H.;Weber, A.; Ivers-Tiffée, E. Electrochim. Acta 2001, 46, 1837. (18) Horita, T.; Yamaji, K.; Sakai, N.; Yokokawa, H.;Weber, A.; Ivers-Tiffée, E. Electrochim. Acta 2001, 46, 1837.
19. [19]
  (19) Khandale, A. P.; Bhoga, S. S. J. Power Sources 2010, 195, 7974. (19) Khandale, A. P.; Bhoga, S. S. J. Power Sources 2010, 195, 7974.
20. [20]
  (20) Sun, L. P.; Li, Q.; Zhao, H.; Huo, L. H.; Grenier, J. C. J. Power Sources 2008, 183, 43. (20) Sun, L. P.; Li, Q.; Zhao, H.; Huo, L. H.; Grenier, J. C. J. Power Sources 2008, 183, 43.

扫一扫看文章

计量

PDF下载量: 716
文章访问数: 2292
HTML全文浏览量: 30

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

中温固体氧化物燃料电池Pr_1.2Sr_0.8NiO₄阴极材料的制备、结构和性能

English

Preparation, Structure and Properties of Pr_1.2Sr_0.8NiO₄ Cathode Materials for Intermediate-Temperature Solid Oxide Fuel Cells

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处