注册 English

Recent Advances in Metal-Organic Cages-Based Composite Membranes

Guoliang Liu ,  Xiao-Qin Liu ,  Lin-Bing Sun

downloadPDF
Citation:  Guoliang Liu, Xiao-Qin Liu, Lin-Bing Sun. Recent Advances in Metal-Organic Cages-Based Composite Membranes[J]. Chinese Journal of Structural Chemistry, 2022, 41(11): 221110. doi: 10.14102/j.cnki.0254-5861.2022-0178 shu

Recent Advances in Metal-Organic Cages-Based Composite Membranes

    • 作者简介: Guoliang Liu received his PhD in physical chemistry from Fujian Institute of Research on the Structure of Matter, CAS, where he worked on application-oriented design and synthesis of zirconium metal-organic cages (Zr-MOCs) under the guidance of Prof. Daqiang Yuan. After a postdoctoral stint at National University of Singapore with Prof. Dan Zhao, he joined the faculty of Nanjing Tech University at 2020. His research interests focus on the construction of Zr-MOCs based crystalline porous supramolecular frameworks for sophisticated applications;
    Xiao-Qin Liu obtained her PhD in 1999 from Nanjing Tech University under the supervision of Professor Jun Shi and Professor Hu-Qing Yao. She joined the faculty of Nanjing Tech University in 1982, and became a professor in 1999. Her current research interests focus on the design, synthesis, and applications of porous functional materials, with emphasis on adsorbents and catalysts;
    Lin-Bing Sun obtained his PhD in 2008 from Nanjing University under the supervision of Professor Jian-Hua Zhu and Professor Yuan Chun. He joined the faculty of Nanjing Tech University in 2008, and became an associate professor in 2011. He was a postdoctoral research associate at Texas A & M University with Professor Hong-Cai Zhou in 2011-2012. His current research interests focus on the fabrication of porous materials and their applications in adsorption and heterogeneous catalysis;
    通讯作者: , lbsun@njtech.edu.cn

English

  • INTRODUNTION

    Membrane separation technology has attracted much attention as an energy-efficient method for small molecular separation owing to its excellent separation efficiency, simple operation process, and environmentally benign merits. However, the polymeric membranes still face several limitations, such as the trade-off between permeability and selectivity, and physical aging or membrane fouling, even though they possess easy processability and mechanical stability features.[1, 2] Recently, membranes made from porous materials with well-defined pore structures, including zeolites, metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have displayed superior permeability and selectivity for small molecular separation.[3-7] However, these membranes are intrinsically brittle and fragile, which largely limits their potential of being produced at a large scale without defects.[8-15] Therefore, it is highly desired to fabricate membranes with large pore volume and good flexibility. The introduction of porous materials such as zeolites, MOFs and COFs as fillers into the polymeric matrix can lead to composite membranes, usually including mixed matrix membranes (MMMs) or thin film nanocomposite (TFN) membranes with both high permeability and good selectivity. These composite membranes combine merits of the easy large-scale processability of the polymer matrix and well-defined pore size of porous fillers.[16-22] However, these porous fillers are insoluble in solvents and often demonstrate high tendency of agglomeration in the membrane at high filler loadings. Therefore, porous fillers with both well-defined pores/apertures and high solubility in solvents are highly desired to achieve excellent dispersibility in the corresponding composite membranes.[23]

    MOCs, also referred to as metal-organic polyhedra (MOPs), are discrete molecule assemblies constructed from metal ions or metal clusters with organic ligands via coordination-driven selfassembly.[24] MOCs have garnered considerable attention owing to their fascinating structures and have demonstrated great potentials in various applications, such as molecular recognition, cavity-induced catalysis, gas adsorption and separation, to mention a few.[25-30] Similar to MOFs, MOCs also possess features, like tunable pore size and easy functionality. In this case, MOCs can be viewed as molecular MOF pore analogues.[31] Different to the insoluble nature of MOFs, MOCs demonstrate impressive solubility in common solvents, which makes it promising as suitable fillers in composite membranes (Scheme 1).[25, 32, 33] Besides, MOCs exhibit an average molecular size of 2.5-5.0 nm, highlighting their high surface-to-volume ratio. Consequently, MOCs can efficiently interact with polymer chains in the composite membrane, promoting the formation of defect-free membranes with good separation performance. Up to now, MOC-based composite membranes have demonstrated great potential for separation applications.

    Scheme 1

    Scheme 1.  Schematic illustration of the structure of composite membranes containing (a) MOFs or (b) molecular MOCs additives (fillers).
    DownLoad: Full-Size Img PowerPoint

    In this review, we will summarize the recent advances in MOC-based composite membranes regarding the judicious selection of MOCs and the potential applications of resultant membranes. We believe that offering a timely and critical review on this important topic will provide insightful guidance on the rational design and fabrication of more MOC-based membranes with excellent separation performance in the future.

    MOCS OR MOPS USED AS FILLERS FOR COMPOSITE MEMBRANE FABRICATION

    Careful choices of metal ions or clusters and organic linkers are the keys to build the desired MOCs. Metals such as Cu(II), Fe(III), Pd (II), Pt(II), Rh(II), Ti(IV), and Zr(IV) have been used as precursors for MOC synthesis. The obtained MOCs can be simply classified as Cu-MOPs, Fe-MOCs, Rh-MOPs, Zr-MOCs, etc. according to the corresponding metal precursors. Once the metal precursor is selected, different ligands possessing a variety of reaction centers, including carboxylate, and/or nitrogen donor groups have been successfully employed to direct suitable assemblies. The obtained MOCs can display diversified topologies, such as tetrahedron, octahedron, cube, icosahedron, cuboctahedron, and so on. Furthermore, the systematic introduction of different functional groups at the periphery of organic ligands can result in isostructural MOCs with tuned pore structure and functions. As discrete molecular assemblies, MOCs possess unique features compared to extended MOFs (Table 1). The nanoscale size and good processability of MOCs highlight their potential for the fabrication of composite membranes with impressive performance for diversified separation applications.

    Table 1

    Table 1.  Selected Characteristics of MOCs and MOFs
    DownLoad: CSV
    Characteristics MOCs MOFs
    porosity porous porous
    solubility soluble in specific solvents insoluble in solvents
    size 2.5-5.0 nm usually larger than 100 nm
    structural tunability good good

    Different to the rapid development of MOF-based composite membranes, MOC-based composite membranes are at their infancy stage. Up till now, two types of MOCs, namely copperbased metal-organic polyhedra (Cu-MOPs) and zirconium-based metal-organic cages (Zr-MOCs), are mainly explored for membrane applications.

    Cu-MOPs. Cu-MOPs were firstly reported by Yaghi and coworkers.[34, 35] In their study, discrete Cu24(bdc)24(solv)24 was obtained when 1, 3, 5-benzenetricarboxylate was replaced by 1, 3-benzenedicarboxylate during the synthesis of HKUST-1. Cu24(bdc)24 features a cuboctahedron topology, in which 12 Cu2 paddlewheel as nodes was bridged by 24 isophthalic acid ligands. Cu-MOPs with different topologies can be obtained by using proper polydentate carboxylate acids.[36] Derivatives of Cu-MOPs with the same topologies are easily accessible where different functional groups are incorporated at the periphery of organic bridging ligands (Figure 1).[37] The topological diversities and superior functionality tolerance impart Cu-MOPs with desired properties so that they can be deliberately synthesized for function-oriented applications.

    Figure 1

    Figure 1.  Crystal structures of Cu-MOPs commonly used for membrane fabrication. (a) Cu24(dodecoxy-bdc)24 (MOP-18), (b) Cu24(NH2-bdc)24, (c) Cu24(tBu-bdc)24 and (d) Cu24(Na/H-SO3-bdc)24.
    DownLoad: Full-Size Img PowerPoint

    Zr-MOCs. Zr-MOCs constructed from in-situ formed tri-nuclear zirconium clusters and polydentate carboxylate acids were firstly reported in 2013.[38, 39] Zr-MOCs with different topologies and various functional groups can be synthesized in a facile way (Figure 2).[40, 41] The judicious design of different Zr-MOCs with various functional groups can be interpreted by hard and soft acids and bases (HASB) theory.[42, 43] Following the HASB theory, Zr(IV) from the in-situ formed tri-nuclear zirconium cluster as the hard acid can selectively react with the hard base, deprotonated carboxylate acid groups, to afford Zr-MOCs during the coordination-driven self-assembly process. Zr-MOCs showed high stability in aqueous solutions with different pH values (typically ranging from 2.0-11.0).[44, 45] Besides, Zr-MOCs are cationic coordination cages and their positive charges are balanced by chloride ions. This ionic nature also imparts Zr-MOCs with good solubility in polar solvents, like methanol.[46] Inspired by these merits, Zr-MOCs have attracted much attention and have showed potential in various applications, such as molecular encapsulation and gas separation.[45, 47] Recently, Zr-MOCs were also used as molecular porous additives for advanced membrane fabrication owing to their good processability.

    Figure 2

    Figure 2.  Crystal structures of Zr-MOCs. Reprinted with permission from ref.[44] Copyright 2018 American Chemical Society.
    DownLoad: Full-Size Img PowerPoint

    Rh-MOP, Fe-MOC, and Ti-MOC have also been investigated as additives for composite membrane fabrication and their structural features will be simply discussed later. It is anticipated that more novel types of MOCs with unique structural properties will be rationally designed and selected as fillers in composite membranes for challenging separation applications in the future.

    ADVANCED MOCS OR MOPS-BASED COMPOSITE MEMBRANES FOR SMALL MOLECULE SEPARATION

    Synthetic Artificial Channels. In 2008, Kim and co-workers firstly reported the incorporation of Cu-MOP, namely MOP-18 with a chemical formula of Cu24(dodecoxy-bdc)24 into lipid bilayer as cation selective channels. It is the first example of artificial ion channels based on MOPs across lipid membranes, which can selectively transport protons and alkali-metal ions with good selectivity based on cation size.[48] Except Cu-MOP, a kind of rhodium based MOP (abbreviated as Rh-MOP) was also explored to fabricate artificial ion channels.[49] In this study, the membrane displayed two conductance states by dynamically exposing either triangular or square apertures of Rh-MOP. The dynamic process was optimized by alkoxyl chain length introduced at the periphery of Rh-MOPs. It is anticipated that superior performance can be achieved as the facile accessibility of Rh-MOPs decorated with various peripheral functional groups. Zr-MOCs have also been investigated as nano-porous fillers for artificial membrane fabrication. The Zr-MOCs can be incorporated and dispersed into lipid membranes at a molecular level by taking advantages of their structural stability and great biocompatibility. Performance evaluation indicated that the resultant composite membranes could serve as biomolecular channels for enantioselective transport of natural amino acids (Figure 3).[50] More significantly, subtle structural adjustments of Zr-MOCs can alter the membrane performance significantly as demonstrated by the fact that cage-1 decorated with hydroxyl groups spontaneously favors the passage of L-asparagine, whereas cage-2 functionalized with crown ether groups preferentially transports D-arginine. This result indicates that the superior structural tunability of MOCs can provide opportunities to achieve optimized performance.

    Figure 3

    Figure 3.  (a) Crystal structures of Zr-MOCs 1-3 investigated in the corresponding literature for membrane fabrication. (b-f) Schematic illustration of enantioselective transmembrane transport of amino acids by cage-embedded liposomes. Reprinted with permission from ref.[50] Copyright 2021 American Chemical Society.
    DownLoad: Full-Size Img PowerPoint

    Reverse Osmosis Membranes for Desalination. Zr-MOCs are suitable candidates for the fabrication of TFN reverse osmosis membranes for desalination as the nanoscale size of Zr-MOCs is far below the thickness of the polyamide selective layer (about 100 nm). Following this assumption, Zhao and co-workers reported the chemically crosslinking one Zr-MOC, named as ZrT-1-NH2, with ideal stability, solubility, and porosity characteristics, into the TFN membranes (Figure 4).[51] The optimized TFN membranes exhibit enhanced water flux while the salt rejection was maintained compared to the pristine thin film composite (TFC) membrane. As a continuing effort in this field, the same group further reported the anti-fouling property of Zr-MOC-incorporated TFN membranes.[52] Introduction of Zr-MOCs into the TFN membranes can significantly improve the antifouling properties towards both protein and positively charged foulants. Similar anti-fouling property was also observed when titaniumbased MOC (abbreviated as Ti-MOC) was used as the filler for TFN membrane fabrication due to the improved hydrophilicity and electrostatic interactions. These results indicated that MOCs are better filler materials for improving the membrane performance by offering additional benefits, such as the enhanced antifouling property, to reverse osmosis membranes, aside from serving as water transport highways. The performance improvement and anti-fouling property push forward a significant step for the practical application of MOCs incorporated reverse osmosis membranes.

    Figure 4

    Figure 4.  (a) Crystal structure of ZrT-1-NH2. (b) Schematic representation of TFC membrane and the proposed chemical structure of the polyamide selective layer. (c) Schematic representation of TFN membrane and the proposed chemical structure of cage-containing selective polyamide layer. Reprinted with permission from ref.[51] Copyright 2021 American Chemical Society.
    DownLoad: Full-Size Img PowerPoint

    Nanofiltration. Fabrication of a polyamide TFN membrane with highly improved nanofiltration performance has been achieved by using iron-based MOC (abbreviated as Fe-MOC) as the molecular filler. The optimal TFN membrane showed a 3-time water flux enhancement and simultaneously improved rejection for Na2SO4 and congo red compared to the neat TFC membrane.[53] The significant performance enhancement can be ascribed to the inner pore of Fe-MOC which can be served as fast transport pathways and the -SO3Na group of the Fe-MOC, which can interact with water molecules with high affinity. Besides, the membrane anti-fouling property was significantly enhanced owing to both increased hydrophilicity and smoother surface microstructure of the TFN membrane. This result indicated the potential of MOCs for the construction of nanofiltration membranes. ZrT-1-NH2 has also been used for the fabrication of nanofiltration membranes by crosslinking ZrT-1-NH2 with trimesoyl chloride (TMC) via interfacial polymerization.[54] The water permeance can be up to 82.0 L⋅m-2⋅h-1⋅bar-1 and the rejection rate for congo red can reach 99.7% owing to the improved pore volume after ZrT-1-NH2 incorporation, accompanied by the concurrent enhancements in dye/salt rejections. Moreover, the TFN membrane also exhibited good antifouling and antibacterial properties. The same group also reported the fabrication of TFN membranes through in-situ interfacial polymerization of lysine and TMC in the presence of ZrT-1-NH2 as the nano-porous filler.[55] The TFN membranes feature striped structure induced by the participation of ZrT-1-NH2 in polymerization, which can greatly enhance the water permeance owing to the enlarged permeation area of the separation layer. In 2018, Zhang and co-workers reported the selection of Zr-MOCs functionalized with amino groups as high connectivity nodes for hyper-cross-linked metal-organic polyhedra (HCMOPs) membrane fabrication.[56] The HCMOPs membranes possess multiple merits imparted by both Zr-MOCs and polyimine matrix. Specifically, good water permeability, self-healing ability, antimicrobial activity, and better separation and mechanical performance can be obtained compared to the pristine polyimine membranes (Figure 5).

    Figure 5

    Figure 5.  (a) Schematic illustration of the fabrication of HCMOPs membranes by using Zr-MOCs as high connectivity nodes. (b) UV-Vis spectra of feed and permeate Brilliant Yellow (BY) solution. (b) The photograph to show the selective separation of BY from BY/Rhodamine B mixture. Reprinted with permission from ref.[56] Copyright 2019 American Chemical Society.
    DownLoad: Full-Size Img PowerPoint

    Pervaporation. MOC-based MMMs have also been investigated for pervaporation processes. In 2014, Li and co-workers reported the application of Cu-MOP with a chemical formula of Cu24(tBubdc)24 for MMM fabrication.[57] The membrane was synthesized by mixing Cu24(tBu-bdc)24 with hyperbranched polymer (Boltorn W3000) and excellent pervaporation separation performance towards aromatic and aliphatic hydrocarbons was achieved. As a continuous project, the same group also introduced isostructural Cu-MOPs decorated with sulfonic (Cu24(Na/H-SO3-bdc)24) and hydroxyl groups (Cu24(OH-bdc)24) as additives for membrane fabrication by using the same Boltorn W3000 polymer (Figure 6).[58] More significant performance enhancement was obtained for Cu24(Na/H-SO3-bdc)24/Bolotorin W3000 membrane, highlighting the advantage of MOCs for membrane separation optimization.

    Figure 6

    Figure 6.  Schematic illustration of fabricating MOPs/Boltorn W3000 hybrid membranes. Reprinted with permission from reff.[58] Copyright 2022 Wiley-VCH.
    DownLoad: Full-Size Img PowerPoint

    Gas Separation. In addition to ions and small organic molecular separation, MOC-based MMMs have also been intensively explored for gas separation. MOP-18 based membranes have also been explored for gas separation by mixing with Matrimid® 5218 for MMM fabrication.[59] Scanning electron microscopy analysis indicated that MOP-18 could distribute evenly in the polymer matrix without aggregation even at a high loading, which can be attributed to the improved dispersibility imparted by long alkyl chains in cages. The membranes showed enhanced permeability and anti-plasticization properties. The permeability of propylene, propane and methane increased 7, 4.3 and 3.3-fold, respectively. However, the gas pair selectivity cannot be retained after the incorporation of MOP-18. Polymers are well-known for their aging property, which seriously affects the membrane permeability and selectivity owing to the increased chain packing density and decreased fractional pore volume along with time. An interesting project presented by Hill and co-workers suggested that the incorporation of Cu-MOPs as fillers can provide anti-aging performance for membranes based on a super glassy polymer, poly(1-trimethylsilyl-1)propyne.[60] Anti-aging properties have also been observed in another project in which Cu24(NH2-bdc)24, a Cu-MOP functionalized with amino groups, was explored as a filler for MMM fabrication.[61] Besides, a large performance enhancement in permeability and selectivity can be obtained upon the addition of 1.6 wt% of Cu24(NH2-bdc)24, which can meet the commercial standard for postcombustion CO2 sequestration. Owing to the excellent anti-aging property, the performance of the composite membrane could still meet the commercial target even after 100 days of aging. Besides, cross-sectional focused ion beam scanning electron microscopy characterization indicated the selected Cu-MOP could be well distributed as molecular units when a low concentration of filler was used. Zhong and co-workers reported the construction of MMMs for natural gas upgrading by mixing a soluble Cu-MOP with a chemical formula of Cu24(Na/H-SO3-bdc)24 with polysulfone and the resultant MMMs showed that a loading of 12 wt% filler can increase the permeability and separation factor of CO2 by 81% and 60%, respectively.[62] These enhancements can be attributed to the strong interaction between sulfonate groups of the deliberately selected Cu-MOP and CO2. Apart from the polymer matrix, graphene oxide (GO) has also been used as a matrix for MOCs-based membrane fabrication. Peng and co-workers reported the mixing of MOP-18 with 15-crown-5 to construct type II porous liquids.[63] After mixing cages with GO matrix, the resultant membranes showed enhanced permeability because of the reduced gas diffusion barriers imparted by the inner porous cavity of MOP-18.

    The solvent evaporation method has been widely used to fabricate MMMs. However, even for MOCs, they are still prone to aggregation during the evaporation process at a considerably high filler loading. The agglomeration of MOCs will restrict the further improvement of membrane performance. To address this, many strategies have been used to improve the compatibility between MOC fillers and the polymer matrix. Hosono and coworkers reported the usage of polyethylene glycol (PEG)-grafted Cu-MOP for the synthesis of defect-free MMMs through the solution casting method.[64] The membranes prepared with PEG-grafted MOPs displayed enhanced gas permeation for CO2 and the CO2/CH4 selectivity can be well-preserved compared to the neat PEG-based membranes. Recently, a novel photo-induced polymerization process has also been utilized to construct MMMs. The nano-porous fillers were firstly mixed with polymer precursor and then subjected to UV irradiation. The membranes could be cured instantaneously within very short time, which is helpful to avoid the agglomeration of nano-porous fillers.[65, 66] Kim and coworkers reported the construction of cross-linked polyethylene glycol (XLPEO) membranes via UV-induced polymerization.[67, 68] Compared to conventional neat XLPEO, a modest CO2 permeability enhancement of 30.5 barrer was observed for MMMs. Besides, the resultant membrane showed increased selectivity of 26.5 towards CO2/N2 compared to 19.6 of pristine XLPEO. Lin and co-workers also reported a bottom-up approach to synthesize the MMMs by dispersing Cu24(Na/H-SO3-bdc)24 as molecular dopants in polymer precursor solutions before rapid photopolymerization to form interpenetrating networks.[69] The distribution of Cu24(Na/H-SO3-bdc)24 with a particle size of about 5 nm was checked by transmission electron microscope analysis. The introduced Cu24(Na/H-SO3-bdc)24 dopant can decrease the glass transition temperatures of membranes and even induce the crystallization of polymer matrix at high loadings. Performance evaluation suggested that increasing the MOP loading could increase CO2 permeability with a slight decrease in CO2/gas selectivity. Kim and co-workers reported the fabrication of MMMs in which EG3-MOP nanocages as CO2-philic fillers were homogeneously distributed in the poly(poly(ethylene glycol) dimethacrylate glycol) dimethacrylate matrix. The good compatibility between EG3-MOP nanocages and the polymer matrix was achieved at a filler loading up to 5 wt% owing to the strong interactions between the two phases in resultant membranes.[70] In 2021, Zhao and co-workers reported the fabrication of homoporous hybrid membranes (HHMs) for natural gas upgrading. The HHMs were prepared by chemically crosslinking polymerizable Zr-MOC, ZrT-1-AA[71] into polymeric precursors via a UV-induced polymerization strategy (Figure 7).[72] The ZrT-1-AA was evenly distributed in the in-situ formed XLPEO matrix at a molecular level with superior interfacial compatibility. This is different to the MOF-based composite membranes fabricated by the same UV-induced polymerization strategy, in which MOF particles are randomly embedded in the polymer matrix.[73] The HHM with a proper ZrT-1-AA loading showed an enhanced CO2 permeability and a comparable selectivity towards CO2/CH4 separation because of the increased CO2 solubility and diffusivity with the addition of MOCs.

    Figure 7

    Figure 7.  (a) The synthetic route and structure of ZrT-1-AA. (b) Schematic diagram of HHMs constructed by crosslinking ZrT-1-AA with in-situ formed XLPEO polymer matrix. (c) The synthetic route and structures of HHMs. Reprinted with permission from ref.[72] Copyright 2021 Elsevier Inc.
    DownLoad: Full-Size Img PowerPoint

    CONCLUSIONS AND PERSPECTIVE

    In this review, recent developments of the incorporation of MOCs, especially Zr-MOCs and Cu-MOPs, as additives for membrane separation are summarized. With fewer amounts of MOCs doped in the polymer matrix, the resultant membranes with improved pore volume showed performance enhancement compared to the pristine ones. Besides, better anti-aging or anti-fouling properties can also be realized in resultant composite membranes. These features indicate the practical application of MOC-based composite membranes for small molecule separation. Although a series of significant advances have been achieved, it is clear that MOC-based composite membranes are still in their infancy and more efforts are needed. For further performance improvement, there are still some issues that should be taken into account. For instance, 1) The agglomeration of MOCs during the membrane fabrication process is still a formidable problem, which will hamper the development of advanced membranes. We should note that membranes would become more brittle with the incorporation of more MOC additives considering the rigid nature of MOCs. The fragile nature is similar to zeolites, MOFs and COFs based membranes. To address this issue, novel membrane fabrication methods such as layer by layer self-assembly and contra-diffusion method may be considered.[74-76] Decorating MOCs with flexible PEG chains to improve the compatibility with the polymer matrix has been proposed as a possible strategy to solve this problem. However, the pore windows of MOCs may be partially blocked by the flexible polymer chains and this will influence the accessibility of MOCs.[77] To address this issue, the design and synthesis of MOCs decorated with both rigid and flexible motifs may be considered. 2) Membrane activation is another challenging issue. MOCs can be incorporated into membranes by delicate designs. Considering the solubility differences between MOCs and polymers, solvents with proper dissolving capacity for both MOCs and polymer are deliberately screened. It is wellknown that porous MOCs may encapsulate solvents. In MOC-based composite membranes, the pore apertures of MOCs will be surrounded by flexible polymer chains and more energies will be needed to remove the encapsulated guest solvents.[78] 3) Different kinds of MOCs, such as well-known palladium-based MOCs (abbreviated as Pd-MOCs), should be introduced into the membrane as additives owing to their excellent structural diversity.[79, 80] 4) Compared to the MOC-based composite membranes, pure MOC-based membranes have been less investigated.[81, 82] More efforts should be devoted to that direction as well. Hierarchical self-assembly of MOCs results into the supramolecular frameworks that possess interpenetrated porosity and some of the stable supramolecular frameworks can retain the pore structure even after the removal of guest molecules. This provides a platform for the fabrication of pure MOC-based membranes and novel advanced properties may be achieved. Considering the rapid developments in MOC chemistry, we believe that these molecular cages will offer tremendous possibilities for the development of membranes. It is expected that this review will be helpful in designing and fabricating more novel MOC-based membranes for practical applications.


    ACKNOWLEDGEMENTS: We acknowledge the financial support of this work by the National Natural Science Foundation of China (22001122 and 21878149), and the National Science Fund for Distinguished Young Scholars(22125804). The authors declare no competing interests.
    COMPETING INTERESTS
    ADDITIONAL INFORMATION
    Full paper can be accessed via http://manu30.magtech.com.cn/jghx/EN/10.14102/j.cnki.0254-5861.2022-0178.
    For submission: https://www.editorialmanager.com/cjschem
    1. [1]

      Lee, W. H.; Seong, J. G.; Hu, X.; Lee, Y. M. Recent progress in microporous polymers from thermally rearranged polymers and polymers of intrinsic microporosity for membrane gas separation: pushing performance limits and revisiting trade-off lines. J. Polym. Sci. 2020, 58, 2450-2466. doi: 10.1002/pol.20200110

    2. [2]

      Hayek, A.; Shalabi, Y. A.; Alsamah, A. Sour mixed-gas upper bounds of glassy polymeric membranes. Sep. Purif. Technol. 2021, 277, 119535. doi: 10.1016/j.seppur.2021.119535

    3. [3]

      Rangnekar, N.; Mittal, N.; Elyassi, B.; Caro, J.; Tsapatsis, M. Zeolite membranes-a review and comparison with MOFs. Chem. Soc. Rev. 2015, 44, 7128-7154. doi: 10.1039/C5CS00292C

    4. [4]

      Guo, J.; Zhang, Y.; Zhu, Y.; Long, C.; Zhao, M.; He, M.; Zhang, X.; Lv, J.; Han, B.; Tang, Z. Ultrathin chiral metal-organic-framework nanosheets for efficient enantioselective separation. Angew. Chem. Int. Ed. 2018, 57, 6873-6877. doi: 10.1002/anie.201803125

    5. [5]

      Fan, H.; Gu, J.; Meng, H.; Knebel, A.; Caro, J. High-flux membranes based on the covalent organic framework COF-LZU1 for selective dye separation by nanofiltration. Angew. Chem. Int. Ed. 2018, 57, 4083-4087. doi: 10.1002/anie.201712816

    6. [6]

      Fan, W.; Ying, Y.; Peh, S. B.; Yuan, H.; Yang, Z.; Yuan, Y. D.; Shi, D.; Yu, X.; Kang, C.; Zhao, D. Multivariate polycrystalline metal-organic framework membranes for CO2/CH4 separation. J. Am. Chem. Soc. 2021, 143, 17716-17723. doi: 10.1021/jacs.1c08404

    7. [7]

      Ji, T.; Liu, L.; Sun, Y.; Liu, Y.; Xu, G.; Yan, J.; He, G.; Liu, Y. Sub-zero temperature synthesis of pressure-resistant ZIF-8 membrane with superior C3H6/C3H8 separation performance. ACS Mater. Lett. 2022, 4, 1094-1100. doi: 10.1021/acsmaterialslett.2c00119

    8. [8]

      Gascon, J.; Kapteijn, F. Metal-organic framework membranes-high potential, bright future? Angew. Chem. Int. Ed. 2010, 49, 1530-1532. doi: 10.1002/anie.200906491

    9. [9]

      Qiu, S.; Xue, M.; Zhu, G. Metal-organic framework membranes: from synthesis to separation application. Chem. Soc. Rev. 2014, 43, 6116-6140. doi: 10.1039/C4CS00159A

    10. [10]

      Ying, Y.; Tong, M.; Ning, S.; Ravi, S. K.; Peh, S. B.; Tan, S. C.; Pennycook, S. J.; Zhao, D. Ultrathin two-dimensional membranes assembled by ionic covalent organic nanosheets with reduced apertures for gas separation. J. Am. Chem. Soc. 2020, 142, 4472-4480. doi: 10.1021/jacs.9b13825

    11. [11]

      Fan, W.; Yuan, S.; Wang, W.; Feng, L.; Liu, X.; Zhang, X.; Wang, X.; Kang, Z.; Dai, F.; Yuan, D.; Sun, D.; Zhou, H. C. Optimizing multivariate metal-organic frameworks for efficient C2H2/CO2 separation. J. Am. Chem. Soc. 2020, 142, 8728-8737. doi: 10.1021/jacs.0c00805

    12. [12]

      Fan, W.; Zhang, X.; Kang, Z.; Liu, X.; Sun, D. Isoreticular chemistry within metal-organic frameworks for gas storage and separation. Coord. Chem. Rev. 2021, 443, 213968. doi: 10.1016/j.ccr.2021.213968

    13. [13]

      Ji, C.; Su, K.; Wang, W.; Chang, J.; El-Sayed, E. -S. M.; Zhang, L.; Yuan, D. Tunable cage-based three-dimensional covalent organic frameworks. CCS Chem. 2021, 3, 3094-3104.

    14. [14]

      Chen, C.; Di, Z.; Li, H.; Liu, J.; Wu, M.; Hong, M. An ultrastable π-π stacked porous organic molecular framework as a crystalline sponge for rapid molecular structure determination. CCS Chem. 2022, 4, 1315-1325. doi: 10.31635/ccschem.021.202100910

    15. [15]

      Carreon, M. A. Microporous crystalline molecular sieve membranes for molecular gas separations: what is next? ACS Mater. Lett. 2022, 4, 868-873. doi: 10.1021/acsmaterialslett.2c00102

    16. [16]

      Kang, Z.; Peng, Y.; Qian, Y.; Yuan, D.; Addicoat, M. A.; Heine, T.; Hu, Z.; Tee, L.; Guo, Z.; Zhao, D. Mixed matrix membranes (MMMs) comprising exfoliated 2D covalent organic frameworks (COFs) for efficient CO2 separation. Chem. Mater. 2016, 28, 1277-1285. doi: 10.1021/acs.chemmater.5b02902

    17. [17]

      Dechnik, J.; Gascon, J.; Doonan, C. J.; Janiak, C.; Sumby, C. J. Mixed-matrix membranes. Angew. Chem. Int. Ed. 2017, 56, 9292-9310. doi: 10.1002/anie.201701109

    18. [18]

      He, S.; Zhu, B.; Jiang, X.; Han, G.; Li, S.; Lau, C. H.; Wu, Y.; Zhang, Y.; Shao, L. Symbiosis-inspired de novo synthesis of ultrahigh MOF growth mixed matrix membranes for sustainable carbon capture. Proc. Natl. Acad. Sci. U. S. A. 2022, 119, e2114964119. doi: 10.1073/pnas.2114964119

    19. [19]

      Zeng, H.; He, S.; Hosseini, S. S.; Zhu, B.; Shao, L. Emerging nanomaterial incorporated membranes for gas separation and pervaporation towards energetic-efficient applications. Adv. Membr. 2022, 2, 100015. doi: 10.1016/j.advmem.2021.100015

    20. [20]

      Zhang, Y.; Guo, J.; Han, G.; Bai, Y.; Ge, Q.; Ma, J.; Lau, C. H.; Shao, L. Molecularly soldered covalent organic frameworks for ultrafast precision sieving. Sci. Adv. 2021, 7, eabe8706. doi: 10.1126/sciadv.abe8706

    21. [21]

      Corcos, A. R.; Levato, G. A.; Jiang, Z.; Evans, A. M.; Livingston, A. G.; Mariñas, B. J.; Dichtel, W. R. Reducing the pore size of covalent organic frameworks in thin-film composite membranes enhances solute rejection. ACS Mater. Lett. 2019, 1, 440-446. doi: 10.1021/acsmaterialslett.9b00272

    22. [22]

      Cheng, Y.; Ying, Y.; Zhai, L.; Liu, G.; Dong, J.; Wang, Y.; Christopher, M. P.; Long, S.; Wang, Y.; Zhao, D. Mixed matrix membranes containing MOF@COF hybrid fillers for efficient CO2/CH4 separation. J. Membr. Sci. 2019, 573, 97-106. doi: 10.1016/j.memsci.2018.11.060

    23. [23]

      Zhu, G.; Zhang, F.; Rivera, M. P.; Hu, X.; Zhang, G.; Jones, C. W.; Lively, R. P. Molecularly mixed composite membranes for advanced separation processes. Angew. Chem. Int. Ed. 2019, 58, 2638-2643. doi: 10.1002/anie.201811341

    24. [24]

      Percastegui, E. G.; Ronson, T. K.; Nitschke, J. R. Design and applications of water-soluble coordination cages. Chem. Rev. 2020, 120, 13480-13544. doi: 10.1021/acs.chemrev.0c00672

    25. [25]

      Gosselin, A. J.; Rowland, C. A.; Bloch, E. D. Permanently microporous metal-organic polyhedra. Chem. Rev. 2020, 120, 8987-9014. doi: 10.1021/acs.chemrev.9b00803

    26. [26]

      Fang, Y.; Powell, J. A.; Li, E.; Wang, Q.; Perry, Z.; Kirchon, A.; Yang, X.; Xiao, Z.; Zhu, C.; Zhang, L.; Huang, F.; Zhou, H. C. Catalytic reactions within the cavity of coordination cages. Chem. Soc. Rev. 2019, 48, 4707-4730. doi: 10.1039/C9CS00091G

    27. [27]

      Lee, S.; Jeong, H.; Nam, D.; Lah, M. S.; Choe, W. The rise of metalorganic polyhedra. Chem. Soc. Rev. 2021, 50, 528-555. doi: 10.1039/D0CS00443J

    28. [28]

      Sanchez-Gonzalez, E.; Tsang, M. Y.; Troyano, J.; Craig, G. A.; Furukawa, S. Assembling metal-organic cages as porous materials. Chem. Soc. Rev. 2022, 51, 4876-4889. doi: 10.1039/D1CS00759A

    29. [29]

      Dong, J.; Liu, Y.; Cui, Y. Supramolecular chirality in metal-organic complexes. Acc. Chem. Res. 2021, 54, 194-206. doi: 10.1021/acs.accounts.0c00604

    30. [30]

      Zhu, Z. Z.; Tian, C. B.; Sun, Q. F. Coordination-assembled molecular cages with metal cluster nodes. Chem. Rec. 2021, 21, 498-522. doi: 10.1002/tcr.202000130

    31. [31]

      Decker, G. E.; Lorzing, G. R.; Deegan, M. M.; Bloch, E. D. MOF-mimetic molecules: carboxylate-based supramolecular complexes as molecular metal-organic framework analogues. J. Mater. Chem. A 2020, 8, 4217-4229. doi: 10.1039/C9TA12497G

    32. [32]

      Zhang, D.; Ronson, T. K.; Zou, Y. -Q.; Nitschke, J. R. Metal-organic cages for molecular separations. Nat. Rev. Chem. 2021, 5, 168-182. doi: 10.1038/s41570-020-00246-1

    33. [33]

      Zhang, J. H.; Xie, S. M.; Zi, M.; Yuan, L. M. Recent advances of application of porous molecular cages for enantioselective recognition and separation. J. Sep. Sci. 2020, 43, 134-149. doi: 10.1002/jssc.201900762

    34. [34]

      Eddaoudi, M.; Kim, J.; Wachter, J. B.; Chae, H. K.; O'Keeffe, M.; Yaghi, O. M. Porous metal-organic polyhedra: 25 A cuboctahedron constructed from 12 Cu2(CO2)4 paddle-wheel building blocks. J. Am. Chem. Soc. 2001, 123, 4368-4369. doi: 10.1021/ja0104352

    35. [35]

      Moulton, B.; Lu, J.; Mondal, A.; Zaworotko, M. J. Nanoballs: nanoscale faceted polyhedra with large windows and cavities. Chem. Commun. 2001, 37, 863-864.

    36. [36]

      Furukawa, H.; Kim, J.; Ockwig, N. W.; O'Keeffe, M.; Yaghi, O. M. Control of vertex geometry, structure dimensionality, functionality, and pore metrics in the reticular synthesis of crystalline metal-organic frameworks and polyhedra. J. Am. Chem. Soc. 2008, 130, 11650-11661. doi: 10.1021/ja803783c

    37. [37]

      Li, J. R.; Zhou, H. C. Bridging-ligand-substitution strategy for the preparation of metal-organic polyhedra. Nat. Chem. 2010, 2, 893-898. doi: 10.1038/nchem.803

    38. [38]

      Liu, G.; Ju, Z.; Yuan, D.; Hong, M. In situ construction of a coordination zirconocene tetrahedron. Inorg. Chem. 2013, 52, 13815-13817. doi: 10.1021/ic402428m

    39. [39]

      El-Sayed, E. M.; Yuan, Y. D.; Zhao, D.; Yuan, D. Zirconium metalorganic cages: synthesis and applications. Acc. Chem. Res. 2022, 55, 1546-1560. doi: 10.1021/acs.accounts.1c00654

    40. [40]

      Liu, G.; Zhou, M.; Su, K.; Babarao, R.; Yuan, D.; Hong, M. Stabilizing the extrinsic porosity in metal-organic cages-based supramolecular framework by in situ catalytic polymerization. CCS Chem. 2021, 3, 1382-1390. doi: 10.31635/ccschem.020.202000263

    41. [41]

      Nam, D.; Huh, J.; Lee, J.; Kwak, J. H.; Jeong, H. Y.; Choi, K.; Choe, W. Cross-linking Zr-based metal-organic polyhedra via postsynthetic polymerization. Chem. Sci. 2017, 8, 7765-7771. doi: 10.1039/C7SC03847J

    42. [42]

      Liu, G.; Zeller, M.; Su, K.; Pang, J.; Ju, Z.; Yuan, D.; Hong, M. Controlled orthogonal self-assembly of heterometal-decorated coordination cages. Chem. Eur. J. 2016, 22, 17345-17350. doi: 10.1002/chem.201604264

    43. [43]

      Yuan, H.; Liu, G.; Qiao, Z.; Li, N.; Buenconsejo, P. J. S.; Xi, S.; Karmakar, A.; Li, M.; Cai, H.; Pennycook, S. J.; Zhao, D. Solutionprocessable metal-organic framework nanosheets with variable functionalities. Adv. Mater. 2021, 33, e2101257. doi: 10.1002/adma.202101257

    44. [44]

      Liu, G.; Yuan, Y. D.; Wang, J.; Cheng, Y.; Peh, S. B.; Wang, Y.; Qian, Y.; Dong, J.; Yuan, D.; Zhao, D. Process-tracing study on the postassembly modification of highly stable zirconium metal-organic cages. J. Am. Chem. Soc. 2018, 140, 6231-6234. doi: 10.1021/jacs.8b03517

    45. [45]

      Jiang, Y.; Tan, P.; Qi, S. -C.; Gu, C.; Peng, S. -S.; Wu, F.; Liu, X. -Q.; Sun, L. -B. Breathing metal-organic polyhedra controlled by light for carbon dioxide capture and liberation. CCS Chem. 2021, 3, 1659-1668. doi: 10.31635/ccschem.020.202000314

    46. [46]

      Gosselin, E. J.; Decker, G. E.; Antonio, A. M.; Lorzing, G. R.; Yap, G. P. A.; Bloch, E. D. A Charged coordination cage-based porous salt. J. Am. Chem. Soc. 2020, 142, 9594-9598. doi: 10.1021/jacs.0c02806

    47. [47]

      Xing, W. -H.; Li, H. -Y.; Dong, X. -Y.; Zang, S. -Q. Robust multifunctional Zr-based metal-organic polyhedra for high proton conductivity and selective CO2 capture. J. Mater. Chem. A 2018, 6, 7724-7730. doi: 10.1039/C8TA00858B

    48. [48]

      Jung, M.; Kim, H.; Baek, K.; Kim, K. Synthetic ion channel based on metal-organic polyhedra. Angew. Chem. Int. Ed. 2008, 47, 5755-5757. doi: 10.1002/anie.200802240

    49. [49]

      Kawano, R.; Horike, N.; Hijikata, Y.; Kondo, M.; Carné-Sánchez, A.; Larpent, P.; Ikemura, S.; Osaki, T.; Kamiya, K.; Kitagawa, S.; Takeuchi, S.; Furukawa, S. Metal-organic cuboctahedra for synthetic ion channels with multiple conductance states. Chem 2017, 2, 393-403. doi: 10.1016/j.chempr.2017.02.002

    50. [50]

      Li, Y.; Dong, J.; Gong, W.; Tang, X.; Liu, Y.; Cui, Y.; Liu, Y. Artificial biomolecular channels: enantioselective transmembrane transport of amino acids mediated by homochiral zirconium metal-organic cages. J. Am. Chem. Soc. 2021, 143, 20939-20951. doi: 10.1021/jacs.1c09992

    51. [51]

      Liu, G.; Zhang, X.; Yuan, Y. D.; Yuan, H.; Li, N.; Ying, Y.; Peh, S. B.; Wang, Y.; Cheng, Y.; Cai, Y.; Gu, Z.; Cai, H.; Zhao, D. Thin-film nanocomposite membranes containing water-stable zirconium metal-organic cages for desalination. ACS Mater. Lett. 2021, 3, 268-274. doi: 10.1021/acsmaterialslett.0c00511

    52. [52]

      Yuan, Y. D.; Zhang, X.; Yang, Z.; Zhao, D. Metal-organic cage incorporating thin-film nanocomposite membranes with antifouling properties. Chem. Commun. 2022, 58, 6865-6868. doi: 10.1039/D2CC01032A

    53. [53]

      Zhang, C.; Si, X.; Zhang, S.; Pei, B.; Gu, J.; Bai, Y. Porous metalorganic molecular cage: a promising candidate to highly improve the nanofiltration performance of thin film nanocomposite membranes. New J. Chem. 2019, 43, 1699-1709. doi: 10.1039/C8NJ04603D

    54. [54]

      Guo, X.; Xu, S.; Sun, Y.; Qiao, Z.; Huang, H.; Zhong, C. Metal-organic polyhedron membranes for molecular separation. J. Membr. Sci. 2021, 632, 119354. doi: 10.1016/j.memsci.2021.119354sue=11

    55. [55]

      Xu, S.; Li, S.; Guo, X.; Huang, H.; Qiao, Z.; Zhong, C. Co-assembly of soluble metal-organic polyhedrons for high-flux thin-film nanocomposite membranes. J. Colloid Inter. Sci. 2022, 615, 10-18. doi: 10.1016/j.jcis.2022.01.173

    56. [56]

      Liu, J.; Duan, W.; Song, J.; Guo, X.; Wang, Z.; Shi, X.; Liang, J.; Wang, J.; Cheng, P.; Chen, Y.; Zaworotko, M. J.; Zhang, Z. Self-healing hyper-cross-linked metal-organic polyhedra (HCMOPs) membranes with antimicrobial activity and highly selective separation properties. J. Am. Chem. Soc. 2019, 141, 12064-12070. doi: 10.1021/jacs.9b05155

    57. [57]

      Zhao, C.; Wang, N.; Wang, L.; Huang, H.; Zhang, R.; Yang, F.; Xie, Y.; Ji, S.; Li, J. R. Hybrid membranes of metal-organic molecule nanocages for aromatic/aliphatic hydrocarbon separation by pervaporation. Chem. Commun. 2014, 50, 13921-13923. doi: 10.1039/C4CC05279J

    58. [58]

      Zhao, C.; Wang, N.; Wang, L.; Sheng, S.; Fan, H.; Yang, F.; Ji, S.; Li, J. -R.; Yu, J. Functionalized metal-organic polyhedra hybrid membranes for aromatic hydrocarbons recovery. ALChE J. 2016, 62, 3706-3716. doi: 10.1002/aic.15263

    59. [59]

      Perez, E. V.; Balkus, K. J.; Ferraris, J. P.; Musselman, I. H. Metalorganic polyhedra 18 mixed-matrix membranes for gas separation. J. Membr. Sci. 2014, 463, 82-93. doi: 10.1016/j.memsci.2014.03.045

    60. [60]

      Kitchin, M.; Teo, J.; Konstas, K.; Lau, C. H.; Sumby, C. J.; Thornton, A. W.; Doonan, C. J.; Hill, M. R. AIMs: a new strategy to control physical aging and gas transport in mixed-matrix membranes. J. Mater. Chem. A 2015, 3, 15241-15247. doi: 10.1039/C5TA02286J

    61. [61]

      Liu, X.; Wang, X.; Bavykina, A. V.; Chu, L.; Shan, M.; Sabetghadam, A.; Miro, H.; Kapteijn, F.; Gascon, J. Molecular-scale hybrid membranes derived from metal-organic polyhedra for gas separation. ACS Appl. Mater. Interfaces 2018, 10, 21381-21389. doi: 10.1021/acsami.8b07045

    62. [62]

      Ma, J.; Ying, Y.; Yang, Q.; Ban, Y.; Huang, H.; Guo, X.; Xiao, Y.; Liu, D.; Li, Y.; Yang, W.; Zhong, C. Mixed-matrix membranes containing functionalized porous metal-organic polyhedrons for the effective separation of CO2-CH4 mixture. Chem. Commun. 2015, 51, 4249-4251. doi: 10.1039/C5CC00384A

    63. [63]

      Deng, Z.; Ying, W.; Gong, K.; Zeng, Y. J.; Yan, Y.; Peng, X. Facilitate gas transport through metal-organic polyhedra constructed porous liquid membrane. Small 2020, 16, e1907016. doi: 10.1002/smll.201907016

    64. [64]

      Hosono, N.; Guo, W.; Omoto, K.; Yamada, H.; Kitagawa, S. Bottom-up synthesis of defect-free mixed-matrix membranes by using polymergrafted metal-organic polyhedra. Chem. Lett. 2019, 48, 597-600. doi: 10.1246/cl.190131

    65. [65]

      Xie, X. Y.; Wu, F.; Liu, X.; Tao, W. Q.; Jiang, Y.; Liu, X. Q.; Sun, L. B. Photopolymerization of metal-organic polyhedra: an efficient approach to improve the hydrostability, dispersity, and processability. Chem. Commun. 2019, 55, 6177-6180. doi: 10.1039/C9CC01745C

    66. [66]

      Yan, Q. Q.; Zhou, L. P.; Zhou, H. Y.; Wang, Z.; Cai, L. X.; Guo, X. Q.; Sun, X. Q.; Sun, Q. F. Metallopolymers cross-linked with self-assembled Ln4L4 cages. Dalton Trans. 2019, 48, 7080-7084.

    67. [67]

      Yun, Y. N.; Sohail, M.; Moon, J. H.; Kim, T. W.; Park, K. M.; Chun, D. H.; Park, Y. C.; Cho, C. H.; Kim, H. Defect-free mixed-matrix membranes with hydrophilic metal-organic polyhedra for efficient carbon dioxide separation. Chem. Asian J. 2018, 13, 631-635. doi: 10.1002/asia.201701647

    68. [68]

      Zhu, B.; He, S.; Wu, Y.; Li, S.; Shao, L. One-step synthesis of structurally stable CO2-philic membranes with ultra-high PEO loading for enhanced carbon capture. Engineering 2022, DOI: 10.1016/j.eng.2022.03.016.

    69. [69]

      Liu, J.; Fulong, C. R. P.; Hu, L.; Huang, L.; Zhang, G.; Cook, T. R.; Lin, H. Interpenetrating networks of mixed matrix materials comprising metalorganic polyhedra for membrane CO2 capture. J. Membr. Sci. 2020, 606, 118122. doi: 10.1016/j.memsci.2020.118122

    70. [70]

      Sohail, M.; An, H.; Choi, W.; Singh, J.; Yim, K.; Kim, B. -H.; Park, Y. C.; Lee, J. S.; Kim, H. Sorption-enhanced thin film composites with metalorganic polyhedral nanocages for CO2 separation. J. Membr. Sci. 2021, 620, 118826. doi: 10.1016/j.memsci.2020.118826

    71. [71]

      Liu, G.; Yang, Z.; Zhou, M.; Wang, Y.; Yuan, D.; Zhao, D. Heterogeneous postassembly modification of zirconium metal-organic cages in supramolecular frameworks. Chem. Commun. 2021, 57, 6276-6279. doi: 10.1039/D1CC01606G

    72. [72]

      Yang, Z.; Liu, G.; Yuan, Y. D.; Peh, S. B.; Ying, Y.; Fan, W.; Yu, X.; Yang, H.; Wu, Z.; Zhao, D. Homoporous hybrid membranes containing metal-organic cages for gas separation. J. Membr. Sci. 2021, 636, 119564. doi: 10.1016/j.memsci.2021.119564

    73. [73]

      Xiang, L.; Sheng, L.; Wang, C.; Zhang, L.; Pan, Y.; Li, Y. Aminofunctionalized ZIF-7 nanocrystals: improved intrinsic separation ability and interfacial compatibility in mixed-matrix membranes for CO2/CH4 separation. Adv. Mater. 2017, 29, 1606999. doi: 10.1002/adma.201606999

    74. [74]

      Yao, M. S.; Lv, X. J.; Fu, Z. H.; Li, W. H.; Deng, W. H.; Wu, G. D.; Xu, G. Layer-by-layer assembled conductive metal-organic framework nanofilms for room-temperature chemiresistive sensing. Angew. Chem. Int. Ed. 2017, 56, 16510-16514. doi: 10.1002/anie.201709558

    75. [75]

      Yao, J.; Dong, D.; Li, D.; He, L.; Xu, G.; Wang, H. Contra-diffusion synthesis of ZIF-8 films on a polymer substrate. Chem. Commun. 2011, 47, 2559-2561. doi: 10.1039/c0cc04734a

    76. [76]

      Huang, K.; Li, Q.; Liu, G.; Shen, J.; Guan, K.; Jin, W. A ZIF-71 hollow fiber membrane fabricated by contra-diffusion. ACS Appl. Mater. Interfaces 2015, 7, 16157-16160. doi: 10.1021/acsami.5b04991

    77. [77]

      Duan, P.; Moreton, J. C.; Tavares, S. R.; Semino, R.; Maurin, G.; Cohen, S. M.; Schmidt-Rohr, K. Polymer Infiltration into metal-organic frameworks in mixed-matrix membranes detected in situ by NMR. J. Am. Chem. Soc. 2019, 141, 7589-7595. doi: 10.1021/jacs.9b02789

    78. [78]

      Joseph, A. I.; Lapidus, S. H.; Kane, C. M.; Holman, K. T. Extreme confinement of xenon by cryptophane-111 in the solid state. Angew. Chem. Int. Ed. 2015, 54, 1471-1475. doi: 10.1002/anie.201409415

    79. [79]

      Sun, Q. F.; Iwasa, J.; Ogawa, D.; Ishido, Y.; Sato, S.; Ozeki, T.; Sei, Y.; Yamaguchi, K.; Fujita, M. Self-assembled M24L48 polyhedra and their sharp structural switch upon subtle ligand variation. Science 2010, 328, 1144-1147. doi: 10.1126/science.1188605

    80. [80]

      Cai, L. X.; Li, S. C.; Yan, D. N.; Zhou, L. P.; Guo, F.; Sun, Q. F. Water-soluble redox-active cage hosting polyoxometalates for selective desulfurization catalysis. J. Am. Chem. Soc. 2018, 140, 4869-4876. doi: 10.1021/jacs.8b00394

    81. [81]

      Andres, M. A.; Carne-Sanchez, A.; Sanchez-Lainez, J.; Roubeau, O.; Coronas, J.; Maspoch, D.; Gascon, I. Ultrathin films of porous metalorganic polyhedra for gas separation. Chem. Eur. J. 2020, 26, 143-147. doi: 10.1002/chem.201904141

    82. [82]

      Liu, L.; Wang, N.; Liu, H. -X.; Shu, L.; Xie, Y. -B.; Li, J. -R.; An, Q. -F. Nano-array assisted metal-organic polyhedra membranes for the pervaporation of aromatic/aliphatic mixtures. J. Membr. Sci. 2019, 575, 1-8. doi: 10.1016/j.memsci.2018.12.081

  • Scheme 1  Schematic illustration of the structure of composite membranes containing (a) MOFs or (b) molecular MOCs additives (fillers).

    下载: 全尺寸图片 幻灯片

    Figure 1  Crystal structures of Cu-MOPs commonly used for membrane fabrication. (a) Cu24(dodecoxy-bdc)24 (MOP-18), (b) Cu24(NH2-bdc)24, (c) Cu24(tBu-bdc)24 and (d) Cu24(Na/H-SO3-bdc)24.

    下载: 全尺寸图片 幻灯片

    Figure 2  Crystal structures of Zr-MOCs. Reprinted with permission from ref.[44] Copyright 2018 American Chemical Society.

    下载: 全尺寸图片 幻灯片

    Figure 3  (a) Crystal structures of Zr-MOCs 1-3 investigated in the corresponding literature for membrane fabrication. (b-f) Schematic illustration of enantioselective transmembrane transport of amino acids by cage-embedded liposomes. Reprinted with permission from ref.[50] Copyright 2021 American Chemical Society.

    下载: 全尺寸图片 幻灯片

    Figure 4  (a) Crystal structure of ZrT-1-NH2. (b) Schematic representation of TFC membrane and the proposed chemical structure of the polyamide selective layer. (c) Schematic representation of TFN membrane and the proposed chemical structure of cage-containing selective polyamide layer. Reprinted with permission from ref.[51] Copyright 2021 American Chemical Society.

    下载: 全尺寸图片 幻灯片

    Figure 5  (a) Schematic illustration of the fabrication of HCMOPs membranes by using Zr-MOCs as high connectivity nodes. (b) UV-Vis spectra of feed and permeate Brilliant Yellow (BY) solution. (b) The photograph to show the selective separation of BY from BY/Rhodamine B mixture. Reprinted with permission from ref.[56] Copyright 2019 American Chemical Society.

    下载: 全尺寸图片 幻灯片

    Figure 6  Schematic illustration of fabricating MOPs/Boltorn W3000 hybrid membranes. Reprinted with permission from reff.[58] Copyright 2022 Wiley-VCH.

    下载: 全尺寸图片 幻灯片

    Figure 7  (a) The synthetic route and structure of ZrT-1-AA. (b) Schematic diagram of HHMs constructed by crosslinking ZrT-1-AA with in-situ formed XLPEO polymer matrix. (c) The synthetic route and structures of HHMs. Reprinted with permission from ref.[72] Copyright 2021 Elsevier Inc.

    下载: 全尺寸图片 幻灯片

    Table 1.  Selected Characteristics of MOCs and MOFs

    Characteristics MOCs MOFs
    porosity porous porous
    solubility soluble in specific solvents insoluble in solvents
    size 2.5-5.0 nm usually larger than 100 nm
    structural tunability good good
    下载: 导出CSV
  • 加载中
WeChat 扫一扫看文章
计量
  • PDF下载量:  8
  • 文章访问数:  481
  • HTML全文浏览量:  47
文章相关
  • 发布日期:  2022-10-31
  • 收稿日期:  2022-08-01
  • 接受日期:  2022-08-18
  • 网络出版日期:  2022-08-23
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章

All Rights Reserved by the Chinese Chemical Society   中国化学会 版权所有 京ICP备05002797号

本系统由北京仁和汇智信息技术有限公司开发    技术支持: info@rhhz.net