铈钛混合氧化物负载磷钨酸吸附-分解NO<sub><i>x</i></sub>性能

引用本文: 程琳, 王睿. 铈钛混合氧化物负载磷钨酸吸附-分解NO_x性能[J]. 无机化学学报, 2013, 29(6): 1206-1214. doi: 10.3969/j.issn.1001-4861.2013.00.195 shu

Citation: CHENG Lin, WANG Rui. Ce-Ti Mixed Oxides Supported H₃PW₁₂O₄₀ for Effective Adsorption-Decomposition of NO_x[J]. Chinese Journal of Inorganic Chemistry, 2013, 29(6): 1206-1214. doi: 10.3969/j.issn.1001-4861.2013.00.195 shu

铈钛混合氧化物负载磷钨酸吸附-分解NO_x性能

程琳 ,
王睿

基金项目:
国家自然科学基金(No.20576064,20776080,20911120088) 、教育部“新世纪优秀人才”支持计划(No.NECT-05-0584) (No.20576064,20776080,20911120088) 、教育部“新世纪优秀人才”支持计划(No.NECT-05-0584)

教育部博士点基金 (No.20070422087) (No.20070422087)

山东省科技计划(No.2006BS08020,2008GG10006005)资助项目。 (No.2006BS08020,2008GG10006005)

摘要: 通过软化学途径合成了铈钛混合氧化物(CeO₂-TiO₂)载体材料,并分别通过等体积浸渍法和机械研磨法负载磷钨酸(H₃PW₁₂O₄₀)。采用FTIR、XRD、SEM和BET比表面积测定对CeO₂-TiO₂及负载型多酸催化剂进行了表征;考察了负载量、负载方法、吸附温度等因素对催化剂吸附NO_x效率的影响;选取吸附性能最佳的催化剂进行了NO_x催化分解实验,探讨了NO_x吸附-分解机理。结果表明:相对于等体积浸渍法,机械研磨法更适合此类载体负载H₃PW₁₂O₄₀,其NO_x吸附效率均高于H₃PW₁₂O₄₀及载体本身;在0～60%的负载量范围内,随着H₃PW₁₂O₄₀负载量的增加,负载型催化剂吸附NO_x的效率呈先升后降趋势,负载量为40%时NO_x吸附效率最佳,达90%;吸附过程中NO_x与催化剂活性组分H₃PW₁₂O₄₀发生作用,生成NOH⁺;H₃PW₁₂O₄₀二级结构中结晶水对催化剂吸附NO_x有重要作用;当温度从150 ℃升至 450 ℃时,被吸附的NO_x发生分解,分解产物的组成与N₂的收率均受升温速率的影响,升温速率越快,N₂收率越高。向吸附分解NO_x后的催化剂床层通入含有水蒸气的空气,可有效补充NO_x分解过程中H₃PW₁₂O₄₀失去的结晶水,从而恢复催化剂优良的NO_x吸附分解性能,实现催化剂的有效再生利用。

关键词:

铈钛混合氧化物;磷钨酸;NO_x;吸附-分解

English

Ce-Ti Mixed Oxides Supported H₃PW₁₂O₄₀ for Effective Adsorption-Decomposition of NO_x

CHENG Lin ,
WANG Rui

1.
School of Environmental Science & Engineering, Shandong University, Jinan 250100, China
Received Date: 11 October 2012
Fund Project:
国家自然科学基金(No.20576064,20776080,20911120088) 、教育部“新世纪优秀人才”支持计划(No.NECT-05-0584)

教育部博士点基金 (No.20070422087)

山东省科技计划(No.2006BS08020,2008GG10006005)资助项目。

Abstract: Ce-Ti mixed oxides (CeO₂-TiO₂) were prepared as the support for solid tungstophosphoric acid (H₃PW₁₂O₄₀). FTIR, XRD, BET surface area measurement, SEM and TPD-MS were employed for characterization and mechanism analysis. CeO₂-TiO₂ is an excellent support for H₃PW₁₂O₄₀. By loading on CeO₂-TiO₂, the NO_x adsorption efficiency of H₃PW₁₂O₄₀ increases, with a peak efficiency of 90%, which is much higher than that of H₃PW₁₂O₄₀ (60%). With the increase of H₃PW₁₂O₄₀ loading, the NO_x adsorption efficiency tends to reach a peak value before dropping down. The mechanical grinding method is superior to the incipient impregnation method for preparing H₃PW₁₂O₄₀/CeO₂-TiO₂. In NO_x adsorption process, NO_x reacts with H₃PW₁₂O₄₀ to produce NOH⁺. The crystal water in the secondary structure of H₃PW₁₂O₄₀ plays an important role in NO_x adsorption. The lost crystal water and oxygen vacancy can be effectively compensated by adding water vapor to regenerate the catalyst. Furthermore, the adsorbed NO_x is decomposed into N₂, O₂ and N₂O, and rapid heating contributes significantly to the decomposition of NO_x over the catalyst, where a yield of 30.5% is achieved for N₂ with the supported catalyst at a temperature ramp of 50 ℃·min^-1.

Key words:

Ce-Ti mixed oxides;H₃PW₁₂O₄₀;NO_x;adsorption-decomposition

1. [1] WANG En-Bo(王恩波), HU Chang-Wen(胡长文), XU Lin (许林). Introduction to Polyoxometalates Chemistry (多酸化学导论). Beijing: Chemical Industry Press, 1998.[1] WANG En-Bo(王恩波), HU Chang-Wen(胡长文), XU Lin (许林). Introduction to Polyoxometalates Chemistry (多酸化学导论). Beijing: Chemical Industry Press, 1998.
2. [2] WANG Xiao-Lan(王晓兰), LI Yang-Guang(李阳光), MENG Jing-Xin(孟靖昕), et al. Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2010,26(3):391-397[2] WANG Xiao-Lan(王晓兰), LI Yang-Guang(李阳光), MENG Jing-Xin(孟靖昕), et al. Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2010,26(3):391-397
3. [3] ZHAO Zhi-Feng(赵志凤), ZHOU Bai-Bin(周百斌), SU Zhan- Hua(苏占华), et al. Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2009,25(5):900-905[3] ZHAO Zhi-Feng(赵志凤), ZHOU Bai-Bin(周百斌), SU Zhan- Hua(苏占华), et al. Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2009,25(5):900-905
4. [4] WANG Jing-Ping(王敬平), WU Qiang(吴强), NIU Jing- Yang(牛景杨). Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2002,18(9):957-960[4] WANG Jing-Ping(王敬平), WU Qiang(吴强), NIU Jing- Yang(牛景杨). Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2002,18(9):957-960
5. [5] Yang R T, Chen N. Ind. Eng. Chem. Res., 1994,33:825 -831[5] Yang R T, Chen N. Ind. Eng. Chem. Res., 1994,33:825 -831
6. [6] Herring A M, McCormick R L. J. Phys. Chem. B, 1998,102 (17):3175-3184[6] Herring A M, McCormick R L. J. Phys. Chem. B, 1998,102 (17):3175-3184
7. [7] Herring A M, McCormick R L, Boonrueng S R. J. Phys. Chem. B, 2000,104(19):4653-4660[7] Herring A M, McCormick R L, Boonrueng S R. J. Phys. Chem. B, 2000,104(19):4653-4660
8. [8] Hodjati S, Vaezzadeh K, Kiennemann A, et al. Top. Catal., 2001,16/17(1/2/3/4):151-155[8] Hodjati S, Vaezzadeh K, Kiennemann A, et al. Top. Catal., 2001,16/17(1/2/3/4):151-155
9. [9] Bonardet J L, Fraissard J, Mc Garvey G B, et al. J. Catal., 1995,151:147-154[9] Bonardet J L, Fraissard J, Mc Garvey G B, et al. J. Catal., 1995,151:147-154
10. [10] Belanger R, Moffat J B. J. Mol. Catal. A: Chem., 1996,114: 319-329[10] Belanger R, Moffat J B. J. Mol. Catal. A: Chem., 1996,114: 319-329
11. [11] Belanger R, Moffat J B. Environ. Sci. Techno., 1995,29: 1681-1685[11] Belanger R, Moffat J B. Environ. Sci. Techno., 1995,29: 1681-1685
12. [12] McCormick R L, Boonrueng S K, Herring A M. Catal. Today, 1998,42:145-157[12] McCormick R L, Boonrueng S K, Herring A M. Catal. Today, 1998,42:145-157
13. [13] Thomas S, Vaezzadeh K, Pitchon V. Top. Catal., 2004,30/ 31:207-213[13] Thomas S, Vaezzadeh K, Pitchon V. Top. Catal., 2004,30/ 31:207-213
14. [14] Kozhevnikov I V. Catalysts for Fine Chemical Synthesis Vol. 2: Catalysis by Polyxometalates. West Sussex: John Wiley & Sons Ltd, 2002.[14] Kozhevnikov I V. Catalysts for Fine Chemical Synthesis Vol. 2: Catalysis by Polyxometalates. West Sussex: John Wiley & Sons Ltd, 2002.
15. [15] Gómez-García M A, Pitchon V, Kiennemann A. Catal. Today, 2005,107/108:60-67[15] Gómez-García M A, Pitchon V, Kiennemann A. Catal. Today, 2005,107/108:60-67
16. [16] Gómez-García M A, Pitchon V, Kiennemann A. Environ. Sci. Technol., 2005,39:638-644[16] Gómez-García M A, Pitchon V, Kiennemann A. Environ. Sci. Technol., 2005,39:638-644
17. [17] Benjaram M R, Ataullah K, Pandian L. J. Phys. Chem. B, 2005,109:3355-3363[17] Benjaram M R, Ataullah K, Pandian L. J. Phys. Chem. B, 2005,109:3355-3363
18. [18] ZHANG Xue-Yang(张学杨), CHENG Lin(程琳), YANG Feng(杨烽), et al. Chem. J. Chin. Univ.(Gaodeng Xuexiao Huaxue Xuebao), 2012,33(8):1826-1834[18] ZHANG Xue-Yang(张学杨), CHENG Lin(程琳), YANG Feng(杨烽), et al. Chem. J. Chin. Univ.(Gaodeng Xuexiao Huaxue Xuebao), 2012,33(8):1826-1834
19. [19] Chen N, Yang R T. J. Catal., 1995,157:76-86[19] Chen N, Yang R T. J. Catal., 1995,157:76-86
20. [20] Hiskia A, Papaconstantinou E. Inorg. Chem., 1992,31:163- 167[20] Hiskia A, Papaconstantinou E. Inorg. Chem., 1992,31:163- 167
21. [21] Hodjati S, Petit C. J. Catal., 2001,197:324-334[21] Hodjati S, Petit C. J. Catal., 2001,197:324-334

扫一扫看文章

计量

PDF下载量: 543
文章访问数: 588
HTML全文浏览量: 23

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

铈钛混合氧化物负载磷钨酸吸附-分解NO_x性能

English

Ce-Ti Mixed Oxides Supported H₃PW₁₂O₄₀ for Effective Adsorption-Decomposition of NO_x

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

铈钛混合氧化物负载磷钨酸吸附-分解NOx性能

English

Ce-Ti Mixed Oxides Supported H3PW12O40 for Effective Adsorption-Decomposition of NOx

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

铈钛混合氧化物负载磷钨酸吸附-分解NO_x性能

Ce-Ti Mixed Oxides Supported H₃PW₁₂O₄₀ for Effective Adsorption-Decomposition of NO_x

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs