汽油多组分表征燃料简化动力学模型的系统化构建及验证

引用本文: 肖干, 张煜盛, 姜光军. 汽油多组分表征燃料简化动力学模型的系统化构建及验证[J]. 物理化学学报, 2016, 32(4): 879-892. doi: 10.3866/PKU.WHXB201601261 shu

Citation: XIAO Gan, ZHANG Yu-Sheng, JIANG Guang-Jun. Systematic Construction and Validation of the Reduced Chemical Kinetic Model of Gasoline Multi-Component Surrogate Fuel[J]. Acta Physico-Chimica Sinica, 2016, 32(4): 879-892. doi: 10.3866/PKU.WHXB201601261 shu

汽油多组分表征燃料简化动力学模型的系统化构建及验证

肖干 ^1, ,
张煜盛 ^{1,
,} ,
姜光军 ^1,2,

1.
1. 华中科技大学能源与动力工程学院, 武汉 430074;
2.
2. 南昌大学机电工程学院, 南昌 330031

通讯作者: 张煜盛

基金项目:
国家自然科学基金(51176057)资助项目 (51176057)

摘要: 提出了一套系统化多级机理简化策略,包含基于误差传播的直接关系图法、峰值浓度分析法、线性同分异构体集总法、主组分分析法、温度敏感性分析和产率分析法,并将其应用于汽油四组分表征燃料详细反应机理的简化,构建了适用于HCCI发动机燃烧边界下的简化机理模型,包含149 个物种、414 个反应。通过与激波管、快速压缩机、增压HCCI发动机实验数据的对比验证表明,新机理可以准确地预测较宽范围条件下的着火滞燃期,在HCCI 发动机的单区模型计算中,该机理对缸内燃烧和排放的预测结果是令人满意的。放热率分析表明,R + O₂反应是控制中间温度区放热的关键基元反应,在高压低温下,异辛烷的放热起到决定性作用。添加2-戊烯之后,使得四组分模型相较于三组分模型更为准确,尤其是对于第一阶段着火滞燃期有显著影响,为进一步探索调和燃料组分比例控制HCCI燃烧提供了一条新思路。

关键词:

English

Systematic Construction and Validation of the Reduced Chemical Kinetic Model of Gasoline Multi-Component Surrogate Fuel

1.
1. College of Energy and Power Engineering, Huazhong University of Science & Technology, Wuhan 430074, P. R. China;
2.
2. College of Machine and Electron Engineering, Nanchang University, Nanchang 330031, P. R. China

Corresponding author: 张煜盛

Received Date: 17 November 2015
Available Online: 26 January 2016
Fund Project:
国家自然科学基金(51176057)资助项目

Abstract: Asystematic multi-stage mechanismreduction strategy for performing skeletal reductions of gasoline four-component surrogate fuel is presented. The approach includes the directed relation graph with error propagation, peak concentration analysis, linear isomer lumping, principal component analysis, temperature sensitivity analysis and rate of production analysis. The final reduced mechanism comprises 149 species and 414 reactions with embedded cross-reactions, which is suitable for homogeneous charge compression ignition (HCCI) engine application. Comparisons between computational and experimental data including the shock tube and rapid compression machine, indicate that the new reduced mechanism can provide good predictability of the ignition delay over extensive parameter space. Applying the reduced mechanism to the HCCI single zone model also shows satisfactory combustion and emission characteristics of the boosted HCCI combustion. Further heat release analysis demonstrates that R + O₂ are the key reactions controlling the intermediate temperature heat release and under high pressure and low temperature conditions, iso-octane is the most important species resulting in a large portion of heat release. After the addition of 2-pentene, the new four component model displays better predictability than the three component model, especially relative to the firststage ignition delay. Based on these new findings, we can use different composition ratios to arbitrarily control the combustion phasing of HCCI combustion.

Key words:

1. [1]
  (1) Kalghatgi, G. T. Proc. Combust. Inst. 2015, 35, 101. doi: 10.1016/j.proci.2014.10.002(1) Kalghatgi, G. T. Proc. Combust. Inst. 2015, 35, 101. doi: 10.1016/j.proci.2014.10.002
2. [2]
  (2) Reitz, R. D. Combust. Flame 2013, 160, 1. doi: org/10.1016/j.combustflame.2012.11.002(2) Reitz, R. D. Combust. Flame 2013, 160, 1. doi: org/10.1016/j.combustflame.2012.11.002
3. [3]
  (3) Battin-Leclerc, F.; Blurock, E.; Bounaceur, R.; Fournet, R.; Glaude, P.; Herbinet, O.; Sirjean, B.;Warth, V. Chem. Soc. Rev. 2011, 40, 4762. doi: 10.1039/C0CS00207K(3) Battin-Leclerc, F.; Blurock, E.; Bounaceur, R.; Fournet, R.; Glaude, P.; Herbinet, O.; Sirjean, B.;Warth, V. Chem. Soc. Rev. 2011, 40, 4762. doi: 10.1039/C0CS00207K
4. [4]
  (4) Dryer, F. L. Proc. Combust. Inst. 2015, 35, 117. doi: org/10.1016/j.proci.2014.09.008(4) Dryer, F. L. Proc. Combust. Inst. 2015, 35, 117. doi: org/10.1016/j.proci.2014.09.008
5. [5]
  (5) Pitz, W. J.; Cernansky, N. P.; Dryer, F. L.; Egolfopoulos, F. N.; Farrell, J. T.; Friend, D. G.; Pitsch, H. SAE Tech. Pap. Ser. 2007, 2007-01-0175. doi: 10.4271/2007-01-0175(5) Pitz, W. J.; Cernansky, N. P.; Dryer, F. L.; Egolfopoulos, F. N.; Farrell, J. T.; Friend, D. G.; Pitsch, H. SAE Tech. Pap. Ser. 2007, 2007-01-0175. doi: 10.4271/2007-01-0175
6. [6]
  (6) Pera, C.; Knop, V. Fuel 2012, 96, 59. doi: 10.1016/j.fuel.2012.01.008(6) Pera, C.; Knop, V. Fuel 2012, 96, 59. doi: 10.1016/j.fuel.2012.01.008
7. [7]
  (7) Badra, J. A.; Bokhumseen, N.; Mulla, N.; Sarathy, S. M.; Farooq, A.; Kalghatgi, G. T.; Gaillard, P. Fuel 2015, 160, 458. doi: org/10.1016/j.fuel.2015.08.007(7) Badra, J. A.; Bokhumseen, N.; Mulla, N.; Sarathy, S. M.; Farooq, A.; Kalghatgi, G. T.; Gaillard, P. Fuel 2015, 160, 458. doi: org/10.1016/j.fuel.2015.08.007
8. [8]
  (8) Gauthier, B. M.; Davidson, D. F.; Hanson, R. K. Combust. Flame 2004, 139, 300. doi: 10.1016/j.combustflame.2004.08.015(8) Gauthier, B. M.; Davidson, D. F.; Hanson, R. K. Combust. Flame 2004, 139, 300. doi: 10.1016/j.combustflame.2004.08.015
9. [9]
  (9) Kukkadapu, G.; Kumar, K.; Sung, C. J.; Mehl, M.; Pitz, W. J. Combust. Flame 2012, 159, 3066. doi: org/10.1016/j.combustflame.2012.05.008(9) Kukkadapu, G.; Kumar, K.; Sung, C. J.; Mehl, M.; Pitz, W. J. Combust. Flame 2012, 159, 3066. doi: org/10.1016/j.combustflame.2012.05.008
10. [10]
  (10) Dec, J. E.; Yang, Y. SAE Tech. Pap. Ser. 2010, 2010-01-1086. doi: 10.4271/2010-01-1086(10) Dec, J. E.; Yang, Y. SAE Tech. Pap. Ser. 2010, 2010-01-1086. doi: 10.4271/2010-01-1086
11. [11]
  (11) Yang, Y.; Dec, J. E.; Dronniou, N.; Sjoberg, M.; Cannella, W. SAE Tech. Pap. Ser. 2011, 2011-01-1359. doi: 10.4271/2011-01-1359(11) Yang, Y.; Dec, J. E.; Dronniou, N.; Sjoberg, M.; Cannella, W. SAE Tech. Pap. Ser. 2011, 2011-01-1359. doi: 10.4271/2011-01-1359
12. [12]
  (12) Mehl, M.; Chen, J. Y.; Pitz, W. J.; Sarathy, S. M.;Westbrook, C. K. Energy Fuels 2011, 25, 5215. doi: org/10.1021/ef201099y(12) Mehl, M.; Chen, J. Y.; Pitz, W. J.; Sarathy, S. M.;Westbrook, C. K. Energy Fuels 2011, 25, 5215. doi: org/10.1021/ef201099y
13. [13]
  (13) Perez, P. L.; Boehman, A. L. Energy Fuels 2012, 26, 6106. doi: org/10.1021/ef300503b(13) Perez, P. L.; Boehman, A. L. Energy Fuels 2012, 26, 6106. doi: org/10.1021/ef300503b
14. [14]
  (14) Naik, C. V.; Pitz, W. J.;Westbrook, C. K.; Sjoberg, M.; Dec, J. E.; Orme, J.; Curran, H. J.; Simmie, J. M. SAE Tech. Pap. Ser. 2005, 2005-01-3741. doi: 10.4271/2005-01-3741(14) Naik, C. V.; Pitz, W. J.;Westbrook, C. K.; Sjoberg, M.; Dec, J. E.; Orme, J.; Curran, H. J.; Simmie, J. M. SAE Tech. Pap. Ser. 2005, 2005-01-3741. doi: 10.4271/2005-01-3741
15. [15]
  (15) Fikri, M.; Herzler, J.; Starke, R.; Schulz, C.; Roth, P.; Kalghatgi, G. T. Combust. Flame 2008, 152, 276. doi: 10.1016/j.combustflame.2007.07.010(15) Fikri, M.; Herzler, J.; Starke, R.; Schulz, C.; Roth, P.; Kalghatgi, G. T. Combust. Flame 2008, 152, 276. doi: 10.1016/j.combustflame.2007.07.010
16. [16]
  (16) Andrae, J. C. G. Fuel 2008, 87, 2013. doi: 10.1016/j.fuel.2007.09.010(16) Andrae, J. C. G. Fuel 2008, 87, 2013. doi: 10.1016/j.fuel.2007.09.010
17. [17]
  (17) Yahyaoui, M.; Djebaïli-Chaumeix, N.; Dagaut, P.; Paillard, C. E.; Gail, S. Proc. Combust. Inst. 2007, 31, 385. doi: 10.1016/j.proci.2006.07.179(17) Yahyaoui, M.; Djebaïli-Chaumeix, N.; Dagaut, P.; Paillard, C. E.; Gail, S. Proc. Combust. Inst. 2007, 31, 385. doi: 10.1016/j.proci.2006.07.179
18. [18]
  (18) Sarathy, S. M.; Kukkadapu, G.; Mehl, M.;Wang, W. J.; Javed, T.; Park, S.; Oehlschlaeger, M. A.; Farooq, A.; Pitz, W. J.; Sung C. J. Proc. Combust. Inst. 2015, 35, 249. doi: org/10.1016/j.proci.2014.05.122(18) Sarathy, S. M.; Kukkadapu, G.; Mehl, M.;Wang, W. J.; Javed, T.; Park, S.; Oehlschlaeger, M. A.; Farooq, A.; Pitz, W. J.; Sung C. J. Proc. Combust. Inst. 2015, 35, 249. doi: org/10.1016/j.proci.2014.05.122
19. [19]
  (19) Ahmed, A.; Goteng, G.; Shankar, V. S. B.; Qurashi, K. A.; Roberts, W. L.; Sarathy, S. M. Fuel 2015, 143, 290. doi: org/10.1016/j.fuel.2014.11.022(19) Ahmed, A.; Goteng, G.; Shankar, V. S. B.; Qurashi, K. A.; Roberts, W. L.; Sarathy, S. M. Fuel 2015, 143, 290. doi: org/10.1016/j.fuel.2014.11.022
20. [20]
  (20) Lu, T. F.; Law, C. K. Prog. Energy Combust. Sci. 2009, 35, 192. doi: 10.1016/j.pecs.2008.10.002(20) Lu, T. F.; Law, C. K. Prog. Energy Combust. Sci. 2009, 35, 192. doi: 10.1016/j.pecs.2008.10.002
21. [21]
  (21) Lu, T. F.; Law, C. K. Proc. Combust. Inst. 2005, 30, 1333. doi: 10.1016/j.proci.2004.08.145(21) Lu, T. F.; Law, C. K. Proc. Combust. Inst. 2005, 30, 1333. doi: 10.1016/j.proci.2004.08.145
22. [22]
  (22) Pepiot-Desjardins, P.; Pitsch, H. Combust. Flame 2008, 154, 67. doi: 10.1016/j.combustflame.2007.10.020(22) Pepiot-Desjardins, P.; Pitsch, H. Combust. Flame 2008, 154, 67. doi: 10.1016/j.combustflame.2007.10.020
23. [23]
  (23) Sun, W. T.; Chen, Z.; Gou, X. L.; Ju, Y. G. Combust. Flame 2010, 157, 1298. doi: 10.1016/j.combustflame.2010.03.006(23) Sun, W. T.; Chen, Z.; Gou, X. L.; Ju, Y. G. Combust. Flame 2010, 157, 1298. doi: 10.1016/j.combustflame.2010.03.006
24. [24]
  (24) Luo, Z. Y.; Lu, T. F.; Maciaszek, M. J.; Som, S.; Longman, D. E. Energy Fuels 2010, 24, 6283. doi: 10.1021/ef1012227(24) Luo, Z. Y.; Lu, T. F.; Maciaszek, M. J.; Som, S.; Longman, D. E. Energy Fuels 2010, 24, 6283. doi: 10.1021/ef1012227
25. [25]
  (25) Fang, Y. M.;Wang, Q. D.;Wang, F.; Li, X. Y. Acta Phys. -Chim. Sin. 2012, 28, 2536. [方亚梅, 王全德, 王繁, 李象远. 物理化学学报, 2012, 28, 2536.] doi: 10.3866/PKU.WHXB201208201(25) Fang, Y. M.;Wang, Q. D.;Wang, F.; Li, X. Y. Acta Phys. -Chim. Sin. 2012, 28, 2536. [方亚梅, 王全德, 王繁, 李象远. 物理化学学报, 2012, 28, 2536.] doi: 10.3866/PKU.WHXB201208201
26. [26]
  (26) Hua, X. X.;Wang, J. B.;Wang, Q. D.; Tan, N. X.; Li, X. Y. Acta Phys. -Chim. Sin. 2011, 27, 2755. [华晓筱, 王静波, 王全德, 谈宁馨, 李象远. 物理化学学报, 2011, 27, 2755.] doi: 10.3866/PKU.WHXB20112755(26) Hua, X. X.;Wang, J. B.;Wang, Q. D.; Tan, N. X.; Li, X. Y. Acta Phys. -Chim. Sin. 2011, 27, 2755. [华晓筱, 王静波, 王全德, 谈宁馨, 李象远. 物理化学学报, 2011, 27, 2755.] doi: 10.3866/PKU.WHXB20112755
27. [27]
  (27) Liu, Y. D.; Jia, M.; Xie, M. Z.; Pang, B. Energy Fuels 2013, 27, 4899. doi: org/10.1021/ef4009955(27) Liu, Y. D.; Jia, M.; Xie, M. Z.; Pang, B. Energy Fuels 2013, 27, 4899. doi: org/10.1021/ef4009955
28. [28]
  (28) Zhang, Q. F.; Zheng, Z. L.; He, Z.W.;Wang, Y. Acta Phys. -Chim. Sin. 2011, 27, 530. [张庆峰, 郑朝蕾, 何祖威, 王迎. 物理化学学报, 2011, 27, 530.] doi: 10.3866/PKU.WHXB20110334(28) Zhang, Q. F.; Zheng, Z. L.; He, Z.W.;Wang, Y. Acta Phys. -Chim. Sin. 2011, 27, 530. [张庆峰, 郑朝蕾, 何祖威, 王迎. 物理化学学报, 2011, 27, 530.] doi: 10.3866/PKU.WHXB20110334
29. [29]
  (29) Mehl, M.; Pitz, W. J.;Westbrook, C. K.; Curran, H. J. Proc. Combust. Inst. 2011, 33, 193. doi: 10.1016/j.proci.2010.05.027(29) Mehl, M.; Pitz, W. J.;Westbrook, C. K.; Curran, H. J. Proc. Combust. Inst. 2011, 33, 193. doi: 10.1016/j.proci.2010.05.027
30. [30]
  (30) Lu, T. F.; Ju, Y. G.; Law, C. K. Combust. Flame 2001, 126, 1445. doi: 10.1016/S0010-2180(01)00252-8(30) Lu, T. F.; Ju, Y. G.; Law, C. K. Combust. Flame 2001, 126, 1445. doi: 10.1016/S0010-2180(01)00252-8
31. [31]
  (31) Lu, T. F.; Law, C. K. Combust. Flame 2008, 154, 153. doi: 10.1016/j.combustflame.2007.11.013(31) Lu, T. F.; Law, C. K. Combust. Flame 2008, 154, 153. doi: 10.1016/j.combustflame.2007.11.013
32. [32]
  (32) Turanyi, T. J. Math. Chem. 1990, 5, 203. doi: 10.1007/BF01166355(32) Turanyi, T. J. Math. Chem. 1990, 5, 203. doi: 10.1007/BF01166355
33. [33]
  (33) Maroteaux, F.; Noel, L. Combust. Flame 2006, 146, 246. doi: 10.1016/j.combustflame.2006.03.006(33) Maroteaux, F.; Noel, L. Combust. Flame 2006, 146, 246. doi: 10.1016/j.combustflame.2006.03.006
34. [34]
  (34) Lutz, A. E.; Kee, R. J.; Miller, J. A. SENKIN: a Fortran Program for Predicting Homogeneous Gas Phase Chemical Kinetics with Sensitivity Analysis. Report SAND87-8248. Sandia, 1987.(34) Lutz, A. E.; Kee, R. J.; Miller, J. A. SENKIN: a Fortran Program for Predicting Homogeneous Gas Phase Chemical Kinetics with Sensitivity Analysis. Report SAND87-8248. Sandia, 1987.
35. [35]
  (35) Kee, R. J.; Grear, J. F.; Smooke, M. D.; Miller, J, A. Chemkin-II: a Fortran Chemical Kinetics Package for the Analysis of Gas-Phase Chemical Kinetics. Report SAND89-8009. Sandia, 1989.(35) Kee, R. J.; Grear, J. F.; Smooke, M. D.; Miller, J, A. Chemkin-II: a Fortran Chemical Kinetics Package for the Analysis of Gas-Phase Chemical Kinetics. Report SAND89-8009. Sandia, 1989.
36. [36]
  (36) Luo, Z. Y.; Plomer, M.; Lu, T. F.; Som, S.; Longman, D. E. Combust. Theor. Model. 2012, 16, 369. doi: org/10.1080/13647830.2011.631034(36) Luo, Z. Y.; Plomer, M.; Lu, T. F.; Som, S.; Longman, D. E. Combust. Theor. Model. 2012, 16, 369. doi: org/10.1080/13647830.2011.631034
37. [37]
  (37) Xiao, G..; Zhang, Y. S.; Lang, J. Chinese Internal Combustion Engine Engineering 2013, 34, 20. [肖干, 张煜盛, 郎静. 内燃机工程, 2013, 34, 20.](37) Xiao, G..; Zhang, Y. S.; Lang, J. Chinese Internal Combustion Engine Engineering 2013, 34, 20. [肖干, 张煜盛, 郎静. 内燃机工程, 2013, 34, 20.]
38. [38]
  (38) Sjoberg, M.; Dec, J.; Hwang, J. Y. SAE Tech. Pap. Ser. 2007, 2007-01-0207. doi: 10.4271/2007-01-0207(38) Sjoberg, M.; Dec, J.; Hwang, J. Y. SAE Tech. Pap. Ser. 2007, 2007-01-0207. doi: 10.4271/2007-01-0207
39. [39]
  (39) Vuilleumier, D.; Kozarac, D.; Mehl, M.; Saxena, S.; Pitz, W.; Dibble, R.; Chen, J. Y.; Sarathy, M.; Combust. Flame 2014, 161, 680. doi: 10.1016/j.combustflame.2013.10.008(39) Vuilleumier, D.; Kozarac, D.; Mehl, M.; Saxena, S.; Pitz, W.; Dibble, R.; Chen, J. Y.; Sarathy, M.; Combust. Flame 2014, 161, 680. doi: 10.1016/j.combustflame.2013.10.008
40. [40]
  (40) Yang, Y.; Dec, J.; Sjoberg, M.; Ji, C. S. Combust. Flame 2015, 162, 4008. doi: 10.1016/j.combustflame.2015.07.040(40) Yang, Y.; Dec, J.; Sjoberg, M.; Ji, C. S. Combust. Flame 2015, 162, 4008. doi: 10.1016/j.combustflame.2015.07.040
41. [41]
  (41) Mehl, M.; Pitz, W.;Westbrook, C. K.; Yasunag, K.; Conroy, C.; Curran, J. Proc. Combust. Inst. 2011, 33, 201. doi: 10.1016/j.proci.2010.05.040(41) Mehl, M.; Pitz, W.;Westbrook, C. K.; Yasunag, K.; Conroy, C.; Curran, J. Proc. Combust. Inst. 2011, 33, 201. doi: 10.1016/j.proci.2010.05.040

扫一扫看文章

计量

PDF下载量: 0
文章访问数: 452
HTML全文浏览量: 51

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

汽油多组分表征燃料简化动力学模型的系统化构建及验证

通讯作者: 张煜盛

English

Systematic Construction and Validation of the Reduced Chemical Kinetic Model of Gasoline Multi-Component Surrogate Fuel

Corresponding author: 张煜盛

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

汽油多组分表征燃料简化动力学模型的系统化构建及验证

通讯作者: 张煜盛

English

Systematic Construction and Validation of the Reduced Chemical Kinetic Model of Gasoline Multi-Component Surrogate Fuel

Corresponding author: 张煜盛

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs