氢终止金刚石表面的形成机理

引用本文: 刘金龙, 刘盛, 郭建超, 化称意, 陈良贤, 魏俊俊, 黑立富, 王晶晶, 冯志红, 刘青, 李成明. 氢终止金刚石表面的形成机理[J]. 物理化学学报, 2015, 31(9): 1741-1746. doi: 10.3866/PKU.WHXB201508031 shu

Citation: LIU Jin-Long, LIU Sheng, GUO Jian-Chao, HUA Chen-Yi, CHEN Liang-Xian, WEI Jun-Jun, HEI Li-Fu, WANG Jing-Jing, FENG Zhi-Hong, LIU Qing, LI Cheng-Ming. Formation Mechanism of the H-terminated Diamond Surface[J]. Acta Physico-Chimica Sinica, 2015, 31(9): 1741-1746. doi: 10.3866/PKU.WHXB201508031 shu

氢终止金刚石表面的形成机理

刘金龙 ^1, ,
刘盛 ^1, ,
郭建超 ^1, ,
化称意 ^1, ,
陈良贤 ^1, ,
魏俊俊 ^1, ,
黑立富 ^1, ,
王晶晶 ^2, ,
冯志红 ^2, ,
刘青 ^3, ,
李成明 ^1,

基金项目:
国家自然科学基金(51402013) (51402013)

中国博士后科学基金(2014M550022) (2014M550022)

中央高校基本科研业务费(FRF-TP-14-042A1) (FRF-TP-14-042A1)

专用集成电路重点实验室基金资助项目

摘要:

为考察金刚石形成氢终止表面的反应机制, 采用微波氢等离子体处理以及电阻丝氢气气氛加热处理进行对比研究. 利用光发射谱(OES)和漫反射傅里叶变换红外光谱(DRIFTS)分别表征了微波氢等离子体中的活性基团和金刚石表面氢终止浓度. 结果表明, 微波氢等离子体环境下, 随着衬底温度、等离子体密度和能量的增加, 温度至700 ℃ (800 W/3 kPa)时, 等离子体中出现了明显的CH基团; 相应地, 金刚石表面氢终止浓度随温度、等离子体密度和能量的增加而增加. 采用氢气气氛下电阻丝加热的方法同样形成了氢终止金刚石表面,表明微波等离子体处理金刚石表面形成氢终止主要源于由温度控制的表面化学反应, 而非等离子体的物理刻蚀作用. 氧终止金刚石表面形成氢终止的机制是表面C=O键在高于500 ℃时分解为CO, 相应的悬挂键由氢原子或氢分子占据.

关键词:

English

Formation Mechanism of the H-terminated Diamond Surface

1.
1 Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, P. R. China;
2 Science and Technology on ASIC Laboratory, Hebei Semiconductor Research Institute, Shijiazhuang 050051, P. R. China;
3 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, P. R. China
Received Date: 07 January 2015
Available Online: 06 September 2015
Fund Project:
国家自然科学基金(51402013)

中国博士后科学基金(2014M550022)

中央高校基本科研业务费(FRF-TP-14-042A1)

专用集成电路重点实验室基金资助项目

Abstract:

Microwave hydrogen plasma was used to introduce hydrogen termination on the diamond surface. Optical emission spectroscopy (OES) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) were used to characterize the active radicals in the plasma and the concentration of H-termination on the diamond surface, respectively. Thermal hydrogenation treatment carried out by hot filament heat in a hydrogen atmosphere was also proposed for incorporation of H-termination on the diamond surface. The results showed that the CH radical content in the microwave plasma and the H-termination concentration on the diamond surface after microwave plasma treatment were both facilitated by increasing the substrate temperature, plasma density, and input power. Interestingly, thermal hydrogenation treatment can produce Htermination on the diamond surface compared with to a similar extent to microwave plasma treatment. These observations show that the crucial factor for forming the H-terminated diamond surface is the surface chemical reaction controlled by temperature, rather than the plasma etching effect. When the temperature is above 500 ℃, C=O bonds on the O-terminated diamond surface decompose to CO and leave dangling bonds, which then connect with atomic or molecular hydrogen.

Key words:

1. [1]
  
  (1) Kubovic, M.; Kasu, M.; Kageshima, H. Appl. Phys. Lett. 2010, 96 (5), 052101. doi: 10.1063/1.3291616
  (1) Kubovic, M.; Kasu, M.; Kageshima, H. Appl. Phys. Lett. 2010, 96 (5), 052101. doi: 10.1063/1.3291616
2. [2]
  (2) Chaniotakis, N.; Sofikiti, N. Anal. Chim. Acta 2008, 615 (1), 1. doi: 10.1016/j.aca.2008.03.046(2) Chaniotakis, N.; Sofikiti, N. Anal. Chim. Acta 2008, 615 (1), 1. doi: 10.1016/j.aca.2008.03.046
3. [3]
  (3) Geng, R.; Zhao, G. H.; Liu, M. C.; Lei, Y. Z. Acta Phys. -Chim. Sin. 2010, 26 (6), 1493. [耿榕, 赵国华, 刘梅川, 雷燕竹. 物理化学学报, 2010, 26 (6), 1493.] doi: 10.3866/PKU.WHXB20100602(3) Geng, R.; Zhao, G. H.; Liu, M. C.; Lei, Y. Z. Acta Phys. -Chim. Sin. 2010, 26 (6), 1493. [耿榕, 赵国华, 刘梅川, 雷燕竹. 物理化学学报, 2010, 26 (6), 1493.] doi: 10.3866/PKU.WHXB20100602
4. [4]
  (4) Lai, C. W.; Sun, Y.; Yang, H.; Zhang, X. Q.; Lin, B. P. Acta Chim. Sin. 2013, 71 (9), 1201. [来常伟, 孙莹, 杨洪, 张雪勤, 林保平. 化学学报, 2013, 71 (9), 1201.](4) Lai, C. W.; Sun, Y.; Yang, H.; Zhang, X. Q.; Lin, B. P. Acta Chim. Sin. 2013, 71 (9), 1201. [来常伟, 孙莹, 杨洪, 张雪勤, 林保平. 化学学报, 2013, 71 (9), 1201.]
5. [5]
  (5) Zhang, M. X.; Li, C. C.; Hua, W. M.; Yue, Y. H.; Gao, Z. Chin. J. Catal. 2014, 35 (11), 1874. [张梦晓, 李璀灿, 华伟明, 乐英红, 高滋. 催化学报, 2014, 35 (11), 1874.](5) Zhang, M. X.; Li, C. C.; Hua, W. M.; Yue, Y. H.; Gao, Z. Chin. J. Catal. 2014, 35 (11), 1874. [张梦晓, 李璀灿, 华伟明, 乐英红, 高滋. 催化学报, 2014, 35 (11), 1874.]
6. [6]
  (6) Liu, J. L.; Li, C. M.; Zhu, R. H.; Guo, J. C.; Chen, L. X.; Wei, J. J.; Hei, L. F.; Wang, J. J.; Feng, Z. H.; Guo, H.; Lü, F. X. Appl. Surf. Sci. 2013, 284, 798. doi: 10.1016/j.apsusc.2013.08.011(6) Liu, J. L.; Li, C. M.; Zhu, R. H.; Guo, J. C.; Chen, L. X.; Wei, J. J.; Hei, L. F.; Wang, J. J.; Feng, Z. H.; Guo, H.; Lü, F. X. Appl. Surf. Sci. 2013, 284, 798. doi: 10.1016/j.apsusc.2013.08.011
7. [7]
  (7) Camarchia, V.; Cappelluti, F.; Ghione, G.; Rossi, M. C.; Calvani, P.; Conte, G.; Pasciuto, B.; Limiti, E.; Dominijanni, D.; Giovine, E. Solid-State Electron. 2011, 55, 19. doi: 10.1016/j.sse. 2010.09.001(7) Camarchia, V.; Cappelluti, F.; Ghione, G.; Rossi, M. C.; Calvani, P.; Conte, G.; Pasciuto, B.; Limiti, E.; Dominijanni, D.; Giovine, E. Solid-State Electron. 2011, 55, 19. doi: 10.1016/j.sse. 2010.09.001
8. [8]
  (8) Kasu, M.; Ueda, K.; Ye, H.; Yamauchi, Y.; Sasaki, S.; Makimoto, T. Diam. Relat. Mater. 2006, 15 (4-8), 783. doi: 10.1016/j.diamond.2005.12.025(8) Kasu, M.; Ueda, K.; Ye, H.; Yamauchi, Y.; Sasaki, S.; Makimoto, T. Diam. Relat. Mater. 2006, 15 (4-8), 783. doi: 10.1016/j.diamond.2005.12.025
9. [9]
  (9) Snidero, E.; Tromson, D.; Mer, C.; Ber nzo, P.; Foord, J. S.; Nebel, C.; Williams, O. A.; Jackman, R. B. J. Appl. Phys. 2003, 93, 2700. doi: 10.1063/1.1539922(9) Snidero, E.; Tromson, D.; Mer, C.; Ber nzo, P.; Foord, J. S.; Nebel, C.; Williams, O. A.; Jackman, R. B. J. Appl. Phys. 2003, 93, 2700. doi: 10.1063/1.1539922
10. [10]
  (10) Russell, S. A. O.; Sharabi, S.; Tallaire, A.; Moran, D. A. J. IEEE Electron Dev. Lett. 2012, 33 (10), 1471. doi: 10.1109/LED. 2012.2210020(10) Russell, S. A. O.; Sharabi, S.; Tallaire, A.; Moran, D. A. J. IEEE Electron Dev. Lett. 2012, 33 (10), 1471. doi: 10.1109/LED. 2012.2210020
11. [11]
  (11) Liu, J. L.; Li, C. M.; Guo, J. C.; Zhu, R. H.; Chen, L. X.; Wei, J. J.; Hei, L. F.; Wang, J. J.; Feng, Z. H.; Guo, H.; Lü, F. X. Appl. Surf. Sci. 2013, 287, 304. doi: 10.1016/j.apsusc.2013.09.147(11) Liu, J. L.; Li, C. M.; Guo, J. C.; Zhu, R. H.; Chen, L. X.; Wei, J. J.; Hei, L. F.; Wang, J. J.; Feng, Z. H.; Guo, H.; Lü, F. X. Appl. Surf. Sci. 2013, 287, 304. doi: 10.1016/j.apsusc.2013.09.147
12. [12]
  (12) Ri, S. G.; Watanabe, H.; Ogura, M.; Takeuchi, D.; Yamasaki, S.; Okushi, H. J. Cryst. Growth 2006, 293 (2), 311. doi: 10.1016/j.jcrysgro.2006.05.036(12) Ri, S. G.; Watanabe, H.; Ogura, M.; Takeuchi, D.; Yamasaki, S.; Okushi, H. J. Cryst. Growth 2006, 293 (2), 311. doi: 10.1016/j.jcrysgro.2006.05.036
13. [13]
  (13) Cui, J. B.; Fang, R. C. Acta Phys. -Chim. Sin. 1996, 12 (2), 102. [崔景彪, 方容川. 物理化学学报, 1996, 12 (2), 102.] doi: 10.3866/PKU.WHXB19960202(13) Cui, J. B.; Fang, R. C. Acta Phys. -Chim. Sin. 1996, 12 (2), 102. [崔景彪, 方容川. 物理化学学报, 1996, 12 (2), 102.] doi: 10.3866/PKU.WHXB19960202
14. [14]
  (14) Weng, S. F. Fourier Transform Infrared Spectroscopy, 2nd ed.; Chemical Industry Press: Beijing, 2010; pp 164-170. [翁诗甫. 傅里叶变换红外光谱分析. 第二版; 北京: 化学工业出版社, 2010: 164-170.](14) Weng, S. F. Fourier Transform Infrared Spectroscopy, 2nd ed.; Chemical Industry Press: Beijing, 2010; pp 164-170. [翁诗甫. 傅里叶变换红外光谱分析. 第二版; 北京: 化学工业出版社, 2010: 164-170.]
15. [15]
  (15) Ando, T.; Inoue, S.; Ishii, M.; Kamo, M.; Sato, Y.; Yamada, O.; Nakano, T. J. Chem. Soc. Faraday Trans. 1993, 89 (4), 749. doi: 10.1039/ft9938900749(15) Ando, T.; Inoue, S.; Ishii, M.; Kamo, M.; Sato, Y.; Yamada, O.; Nakano, T. J. Chem. Soc. Faraday Trans. 1993, 89 (4), 749. doi: 10.1039/ft9938900749
16. [16]
  (16) Jiang, T.; Xu, K. Carbon 1995, 33 (12), 1663. doi: 10.1016/S0039-6028(98)00107-1(16) Jiang, T.; Xu, K. Carbon 1995, 33 (12), 1663. doi: 10.1016/S0039-6028(98)00107-1
17. [17]
  (17) Su, C.; Lin, J. C. Surf. Sci. 1998, 406 (1-3), 149. doi: 10.1016/S0039-6028(98)00107-1(17) Su, C.; Lin, J. C. Surf. Sci. 1998, 406 (1-3), 149. doi: 10.1016/S0039-6028(98)00107-1
18. [18]
  (18) Jiang, X.; Rickers, C. Appl. Phys. Lett. 1999, 75 (25), 3935. doi: 10.1063/1.125499(18) Jiang, X.; Rickers, C. Appl. Phys. Lett. 1999, 75 (25), 3935. doi: 10.1063/1.125499
19. [19]
  (19) Thomas, R. E.; Rudder, R. A.; Markunas, R. J. J. Vac. Sci. Technol. A 1992, 10 (4), 2451. doi: 10.1116/1.577983
  (19) Thomas, R. E.; Rudder, R. A.; Markunas, R. J. J. Vac. Sci. Technol. A 1992, 10 (4), 2451. doi: 10.1116/1.577983

扫一扫看文章

计量

PDF下载量: 174
文章访问数: 958
HTML全文浏览量: 61

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

氢终止金刚石表面的形成机理

English

Formation Mechanism of the H-terminated Diamond Surface

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

氢终止金刚石表面的形成机理

English

Formation Mechanism of the H-terminated Diamond Surface

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南： 你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs