高倍率性能锂离子电池Li[Ni1/3Co1/3Mn1/3]O2正极材料的制备及其电化学性能

引用本文: 张继斌, 滑纬博, 郑卓, 刘文元, 郭孝东, 钟本和. 高倍率性能锂离子电池Li[Ni_1/3Co_1/3Mn_1/3]O₂正极材料的制备及其电化学性能[J]. 物理化学学报, 2015, 31(5): 905-912. doi: 10.3866/PKU.WHXB201503091 shu

Citation: ZHANG Ji-Bin, ZHENG Zhuo, LIU Wen-Yuan, GUO Xiao-Dong, ZHONG Ben-He. Preparation and Electrochemical Performance of Li[Ni_1/3Co_1/3Mn_1/3]O₂ Cathode Material for High-Rate Lithium-Ion Batteries[J]. Acta Physico-Chimica Sinica, 2015, 31(5): 905-912. doi: 10.3866/PKU.WHXB201503091 shu

高倍率性能锂离子电池Li[Ni_1/3Co_1/3Mn_1/3]O₂正极材料的制备及其电化学性能

基金项目:
四川省科技支撑计划(2014GZ0077) (2014GZ0077)

四川大学青年基金(2011SCU11081) (2011SCU11081)

教育部高校博士学科点科研基金(20120181120103)资助项目 (20120181120103)

摘要:

采用改进的碳酸盐共沉淀与高温固相法相结合的方法制备出了高倍率性能的锂离子电池正极材料Li[Ni_1/3Co_1/3Mn_1/3]O₂, 通过X射线衍射(XRD)、扫描电镜(SEM)、循环伏安扫描(CV)、电化学阻抗谱(EIS)和电化学性能测试等手段对材料进行表征. 结果表明, 该方法制备的材料具有良好的α-NaFeO₂型层状结构(R3m(166)), 一次粒径平均大小为157 nm, 二次颗粒成球形. 同传统碳酸盐制备得到的材料相比, 该材料具备良好的倍率性能和循环性能, 在2.7-4.3 V 电压范围内, 0.1C (1.0C=180 mA·g^-1)倍率下, 首次放电比容量为156.4mAh·g^-1, 库仑效率为81.9%. 在较高倍率下, 即0.5C、5.0C和20C时, 其放电比容量分别为136.9、111.3、81.3mAh·g^-1. 在1C倍率下100次循环容量保持率为92.9%, 高于传统共沉淀法得到的材料(87.0%).

关键词:

English

Preparation and Electrochemical Performance of Li[Ni_1/3Co_1/3Mn_1/3]O₂ Cathode Material for High-Rate Lithium-Ion Batteries

1.
Phosphorus Resources Comprehensive Utilization & Clean Processing Center of Ministry of Education, School of Chemical Engineering, Sichuan University, Chengdu 610065, P. R. China
Received Date: 13 November 2014
Available Online: 08 May 2015
Fund Project:
四川省科技支撑计划(2014GZ0077)

四川大学青年基金(2011SCU11081)

教育部高校博士学科点科研基金(20120181120103)资助项目

Abstract:

A spherical Li[Ni_1/3Co_1/3Mn_1/3]O₂ cathode material for lithium-ion batteries was synthesized using a combination of modified carbonate co-precipitation and solid-state methods. The as-prepared material was analyzed using X- ray diffractometry (XRD), scanning electron microscopy (SEM), galvanostatic chargedischarge tests, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The results indicate that the material synthesized using this new method has a well-ordered layered structure, α-NaFeO₂ [space group: R3m(166)], a spherical morphology, and an average particle size of 157 nm. Electrochemical measurements showed that the material has a od rate capability and long-term cycling performance. At a current density of 0.1C (1.0C=180mA·g^-1) in the voltage range 2.7-4.3 V, the initial discharge capacity was 156.4 mAh·g^-1 and the coulombic efficiency was 81.9%. At 0.5C, 5C, and 20C, the specific capacities of the material were 136.9, 111.3, and 81.3 mAh·g^-1, respectively. After 100 cycles at 1C, the material retained 92.9% of its initial capacity; this is higher than those of materials prepared using conventional carbonate co-precipitation (87.0%).

Key words:

1. [1]
  
  (1) Yun, S. H.; Park, K. S.; Park, Y. J. J. Power Sources 2010, 195, 6108. doi: 10.1016/j.jpowsour.2009.11.022
  (1) Yun, S. H.; Park, K. S.; Park, Y. J. J. Power Sources 2010, 195, 6108. doi: 10.1016/j.jpowsour.2009.11.022
2. [2]
  (2) Li, Y.; Han, Q.; Ming, X.; Ren, M.; Li, L.; Ye, W.; Zhang, X.; Xu, H.; Li, L. Ceram. Int. 2014, 40, 14933. doi: 10.1016/j. ceramint.2014.06.090(2) Li, Y.; Han, Q.; Ming, X.; Ren, M.; Li, L.; Ye, W.; Zhang, X.; Xu, H.; Li, L. Ceram. Int. 2014, 40, 14933. doi: 10.1016/j. ceramint.2014.06.090
3. [3]
  (3) Hua, W. B.; Guo, X. D.; Zheng, Z.; Wang, Y. J.; Zhong, B. H.; Fang, B.; Wang, J. Z.; Chou, S. L.; Liu, H. J. Power Sources 2015, 257, 200.(3) Hua, W. B.; Guo, X. D.; Zheng, Z.; Wang, Y. J.; Zhong, B. H.; Fang, B.; Wang, J. Z.; Chou, S. L.; Liu, H. J. Power Sources 2015, 257, 200.
4. [4]
  (4) Jacob, C.; Lynch, T.; Chen, A.; Jian, J.; Wang, H. J. Power Sources 2013, 241, 410. doi: 10.1016/j.jpowsour.2013.04.140(4) Jacob, C.; Lynch, T.; Chen, A.; Jian, J.; Wang, H. J. Power Sources 2013, 241, 410. doi: 10.1016/j.jpowsour.2013.04.140
5. [5]
  (5) Zhang, S.; Deng, C.; Fu, B. L.; Yang, S. Y.; Ma, L. Powder Technol. 2010, 198, 373. doi: 10.1016/j.powtec.2009.12.002(5) Zhang, S.; Deng, C.; Fu, B. L.; Yang, S. Y.; Ma, L. Powder Technol. 2010, 198, 373. doi: 10.1016/j.powtec.2009.12.002
6. [6]
  (6) Feng, R.; Wang, L.W.; Lü, Z. Y.; Wu, Q.; Yang, L. J.; Wang, X. Z.; Hu, Z. Acta Chim. Sin. 2014, 72, 653. [冯瑞, 王立伟, 吕之阳, 吴强, 杨立军, 王喜章, 胡征. 化学学报, 2014, 72, 653.] doi: 10.6023/A14030227(6) Feng, R.; Wang, L.W.; Lü, Z. Y.; Wu, Q.; Yang, L. J.; Wang, X. Z.; Hu, Z. Acta Chim. Sin. 2014, 72, 653. [冯瑞, 王立伟, 吕之阳, 吴强, 杨立军, 王喜章, 胡征. 化学学报, 2014, 72, 653.] doi: 10.6023/A14030227
7. [7]
  (7) Liang, L.; Du, K.; Peng, Z.; Cao, Y.; Duan, J.; Jiang, J.; Hu, G. Electrochim. Acta 2014, 130, 82. doi: 10.1016/j.electacta.2014.02.100(7) Liang, L.; Du, K.; Peng, Z.; Cao, Y.; Duan, J.; Jiang, J.; Hu, G. Electrochim. Acta 2014, 130, 82. doi: 10.1016/j.electacta.2014.02.100
8. [8]
  (8) Lu, Y.; Zhao, Y. Particuology 2010, 8, 202. doi: 10.1016/j.partic.2010.03.006(8) Lu, Y.; Zhao, Y. Particuology 2010, 8, 202. doi: 10.1016/j.partic.2010.03.006
9. [9]
  (9) Noh, H. J.; Youn, S.; Yoon, C. S.; Sun, Y. K. J. Power Sources 2013, 233, 121. doi: 10.1016/j.jpowsour.2013.01.063(9) Noh, H. J.; Youn, S.; Yoon, C. S.; Sun, Y. K. J. Power Sources 2013, 233, 121. doi: 10.1016/j.jpowsour.2013.01.063
10. [10]
  (10) Xu, Z.; Xiao, L.; Wang, F.; Wu, K.; Zhao, L.; Li, M. R.; Zhang, H. L.; Wu, Q.; Wang, J. J. Power Sources 2014, 248, 180. doi: 10.1016/j.jpowsour.2013.09.064(10) Xu, Z.; Xiao, L.; Wang, F.; Wu, K.; Zhao, L.; Li, M. R.; Zhang, H. L.; Wu, Q.; Wang, J. J. Power Sources 2014, 248, 180. doi: 10.1016/j.jpowsour.2013.09.064
11. [11]
  (11) K?z?lta?-Yavuz, N.; Herklotz, M.; Hashem, A. M.; Abuzeid, H. M.; Schwarz, B.; Ehrenberg, H.; Mauger, A.; Julien, C. M. Electrochim. Acta 2013, 113, 313. doi: 10.1016/j.electacta.2013.09.065(11) K?z?lta?-Yavuz, N.; Herklotz, M.; Hashem, A. M.; Abuzeid, H. M.; Schwarz, B.; Ehrenberg, H.; Mauger, A.; Julien, C. M. Electrochim. Acta 2013, 113, 313. doi: 10.1016/j.electacta.2013.09.065
12. [12]
  (12) Liu, Z. M.; Hu, G. R.; Fang, Z. S.; Zhang, X. L.; Liu, Y. X. Journal of Inorgnaic Material 2007, 22, 637. [刘智敏, 胡国荣, 方正升, 张新龙, 刘业翔. 无机材料学报, 2007, 22, 637.](12) Liu, Z. M.; Hu, G. R.; Fang, Z. S.; Zhang, X. L.; Liu, Y. X. Journal of Inorgnaic Material 2007, 22, 637. [刘智敏, 胡国荣, 方正升, 张新龙, 刘业翔. 无机材料学报, 2007, 22, 637.]
13. [13]
  (13) Kim, K. J.; Jo, Y. N.; Lee, W. J.; Subburaj, T.; Prasanna, K.; Lee, C.W. J. Power Sources 2014, 268, 349 doi: 10.1016/j.jpowsour.2014.06.057(13) Kim, K. J.; Jo, Y. N.; Lee, W. J.; Subburaj, T.; Prasanna, K.; Lee, C.W. J. Power Sources 2014, 268, 349 doi: 10.1016/j.jpowsour.2014.06.057
14. [14]
  (14) Yin, K.; Fang, W. M.; Zhong, B. H.; Guo, X. D.; Tang, Y.; Nie, X. Electrochim. Acta 2012, 85, 99. doi: 10.1016/j.electacta.2012.06.064(14) Yin, K.; Fang, W. M.; Zhong, B. H.; Guo, X. D.; Tang, Y.; Nie, X. Electrochim. Acta 2012, 85, 99. doi: 10.1016/j.electacta.2012.06.064
15. [15]
  (15) Zhang, S.; Deng, C.; Yang, S. Y.; Niu, H. J. Alloy. Compd. 2009, 484, 519. doi: 10.1016/j.jallcom.2009.04.149(15) Zhang, S.; Deng, C.; Yang, S. Y.; Niu, H. J. Alloy. Compd. 2009, 484, 519. doi: 10.1016/j.jallcom.2009.04.149
16. [16]
  (16) Zhu, Z.; Qi, L; Zhang, D.; Yu, H. Electrochim. Acta 2014, 115, 290. doi: 10.1016/j.electacta.2013.10.167(16) Zhu, Z.; Qi, L; Zhang, D.; Yu, H. Electrochim. Acta 2014, 115, 290. doi: 10.1016/j.electacta.2013.10.167
17. [17]
  (17) Xiang, Y.; Yin, Z.; Li, X. J. Solid State Electr. 2014, 18, 2123. doi: 10.1007/s10008-014-2461-8(17) Xiang, Y.; Yin, Z.; Li, X. J. Solid State Electr. 2014, 18, 2123. doi: 10.1007/s10008-014-2461-8
18. [18]
  (18) Zhu, Z.; Qi, L.; Li, W.; Liao, X. Y. Acta Phys. -Chim. Sin. 2014, 30, 669. [朱智, 其鲁, 李卫, 廖细英. 物理化学学报, 2014, 30, 669.] doi: 10.3866/PKU.WHXB201402102(18) Zhu, Z.; Qi, L.; Li, W.; Liao, X. Y. Acta Phys. -Chim. Sin. 2014, 30, 669. [朱智, 其鲁, 李卫, 廖细英. 物理化学学报, 2014, 30, 669.] doi: 10.3866/PKU.WHXB201402102
19. [19]
  (19) Xiang, X.; Li, W. Electrochim. Acta 2014, 127, 259. doi: 10.1016/j.electacta.2014.02.037(19) Xiang, X.; Li, W. Electrochim. Acta 2014, 127, 259. doi: 10.1016/j.electacta.2014.02.037
20. [20]
  (20) Li, J. F.; Xiong, S. L.; Li, X.W.; Qian, Y. T. Nanoscale 2013, 5, 2045. doi: 10.1039/c2nr33576j(20) Li, J. F.; Xiong, S. L.; Li, X.W.; Qian, Y. T. Nanoscale 2013, 5, 2045. doi: 10.1039/c2nr33576j
21. [21]
  (21) Kong, J. Z.; Zhou, F.; Wang, C. B.; Yang, X. Y.; Zhai, H. F.; Li, H.; Li, J. X.; Tang, Z.; Zhang, S. Q. J. Alloy. Compd. 2013, 554, 221. doi: 10.1016/j.jallcom.2012.11.090(21) Kong, J. Z.; Zhou, F.; Wang, C. B.; Yang, X. Y.; Zhai, H. F.; Li, H.; Li, J. X.; Tang, Z.; Zhang, S. Q. J. Alloy. Compd. 2013, 554, 221. doi: 10.1016/j.jallcom.2012.11.090
22. [22]
  (22) Hua, W. B.; Zhang, J. B.; Zheng, Z.; Liu, W. Y.; Peng, X. H.; Guo, X. D.; Zhong, B. H.; Wang, Y. J.; Wang, X. L. Dalton Trans. 2014, 43, 14824. doi: 10.1039/C4DT01611D(22) Hua, W. B.; Zhang, J. B.; Zheng, Z.; Liu, W. Y.; Peng, X. H.; Guo, X. D.; Zhong, B. H.; Wang, Y. J.; Wang, X. L. Dalton Trans. 2014, 43, 14824. doi: 10.1039/C4DT01611D
23. [23]
  (23) Yao, Y.; Liu, H.; Li, G.; Peng, H.; Chen, K. Electrochim. Acta 2013, 113, 340. doi: 10.1016/j.electacta.2013.09.071(23) Yao, Y.; Liu, H.; Li, G.; Peng, H.; Chen, K. Electrochim. Acta 2013, 113, 340. doi: 10.1016/j.electacta.2013.09.071
24. [24]
  (24) Deng, C.; Zhang, S.; Ma, L.; Sun, Y. H.; Yang, S. Y.; Fu, B. L.; Liu, F. L.; Wu, Q. J. Alloy. Compd. 2011, 509, 1322. doi: 10.1016/j.jallcom.2010.10.027(24) Deng, C.; Zhang, S.; Ma, L.; Sun, Y. H.; Yang, S. Y.; Fu, B. L.; Liu, F. L.; Wu, Q. J. Alloy. Compd. 2011, 509, 1322. doi: 10.1016/j.jallcom.2010.10.027
25. [25]
  (25) Wang, J. L.; Chui, D.W. Transactions of Materials and Heat Treatment 2012, 33, 15. [王金龙, 崔大伟. 材料热处理学报, 2012, 33, 15.](25) Wang, J. L.; Chui, D.W. Transactions of Materials and Heat Treatment 2012, 33, 15. [王金龙, 崔大伟. 材料热处理学报, 2012, 33, 15.]
26. [26]
  (26) Huang, Z. D.; Liu, X. M.; Zhang, B.; Oh, S.W.; Ma, P. C.; Kim, J. K. Scripta Mater. 2011, 64, 122. doi: 10.1016/j.scriptamat. 2010.09.018(26) Huang, Z. D.; Liu, X. M.; Zhang, B.; Oh, S.W.; Ma, P. C.; Kim, J. K. Scripta Mater. 2011, 64, 122. doi: 10.1016/j.scriptamat. 2010.09.018
27. [27]
  (27) Gao, P.; Yang, G.; Liu, H.; Wang, L.; Zhou, H. Solid State Ionics 2012, 207, 50. doi: 10.1016/j.ssi.2011.11.020(27) Gao, P.; Yang, G.; Liu, H.; Wang, L.; Zhou, H. Solid State Ionics 2012, 207, 50. doi: 10.1016/j.ssi.2011.11.020
28. [28]
  (28) Hua, W. B.; Guo, X. D.; Zheng, Z.; Zhang, J. B.; Zhong, B. H. Chemical Research and Application 2014, 64, 441. [滑纬博, 郭孝东, 郑卓, 张继斌, 钟本和. 化学研究与应用, 2014, 64, 441.](28) Hua, W. B.; Guo, X. D.; Zheng, Z.; Zhang, J. B.; Zhong, B. H. Chemical Research and Application 2014, 64, 441. [滑纬博, 郭孝东, 郑卓, 张继斌, 钟本和. 化学研究与应用, 2014, 64, 441.]
29. [29]
  (29) Huang, Z. D.; Liu, X. M.; Oh, S.W.; Zhang, B.; Ma, P. C.; Kim, J. K. J. Mater. Chem. 2011, 21, 10777. doi: 10.1039/c1jm00059d(29) Huang, Z. D.; Liu, X. M.; Oh, S.W.; Zhang, B.; Ma, P. C.; Kim, J. K. J. Mater. Chem. 2011, 21, 10777. doi: 10.1039/c1jm00059d
30. [30]
  (30) Riley, L. A.; Van Atta, S.; Cavanagh, A. S.; Yan, Y.; George, S. M.; Liu, P.; Dillon, A. C.; Lee, S. H. J. Power Sources 2011, 196, 3317. doi: 10.1016/j.jpowsour.2010.11.124
  (30) Riley, L. A.; Van Atta, S.; Cavanagh, A. S.; Yan, Y.; George, S. M.; Liu, P.; Dillon, A. C.; Lee, S. H. J. Power Sources 2011, 196, 3317. doi: 10.1016/j.jpowsour.2010.11.124

扫一扫看文章

计量

PDF下载量: 392
文章访问数: 805
HTML全文浏览量: 10

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

高倍率性能锂离子电池Li[Ni_1/3Co_1/3Mn_1/3]O₂正极材料的制备及其电化学性能

English

Preparation and Electrochemical Performance of Li[Ni_1/3Co_1/3Mn_1/3]O₂ Cathode Material for High-Rate Lithium-Ion Batteries

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处