Ti, Cr, Al和B合金化元素对α-Nb5Si3力学性能和电子结构的影响

引用本文: 邹爱华, 徐江, 黄豪杰. Ti, Cr, Al和B合金化元素对α-Nb₅Si₃力学性能和电子结构的影响[J]. 物理化学学报, 2014, 30(2): 289-296. doi: 10.3866/PKU.WHXB201312191 shu

Citation: ZOU Ai-Hua, XU Jiang, HUANG Hao-Jie. Effects of the Alloying Elements Ti, Cr, Al and B on the Mechanical Properties and Electronic Structure of α-Nb₅Si₃[J]. Acta Physico-Chimica Sinica, 2014, 30(2): 289-296. doi: 10.3866/PKU.WHXB201312191 shu

Ti, Cr, Al和B合金化元素对α-Nb₅Si₃力学性能和电子结构的影响

基金项目:
国家自然科学基金(51374130) (51374130)

航空科学基金(2013ZE52058)资助项目 (2013ZE52058)

摘要:

采用基于密度泛函理论(DFT)的第一性原理方法，通过比较形成能(E_form)、价电子浓度(VEC)、弹性常数(C_ij)、剪切模量(G)与体模量(B)的比值(G/B)以及派-纳力(τ_P-N)等参量的变化，研究了Ti、Cr、Al和B合金化对D8₁结构的α-Nb₅Si₃结构稳定性和力学性能的影响. 研究表明：合金化元素Ti、Cr、Al和B分别优先占据α-Nb₅Si₃中Nb^4c、Nb^4c、Si^4a和Si^8h位置；添加不同含量合金化元素的α-Nb₅Si₃仍保持稳定的D8₁结构；Ti、Al和B合金化使α-Nb₅Si₃的脆性增加，而随着Cr含量的增加，α-Nb₅Si₃的韧性逐渐增强. 此外，态密度(DOS)和Mulliken布居等电子结构的计算结果表明：Ti、Al和B合金化导致α-Nb₅Si₃脆性增加的主要原因是提高了共价键的强度；而Cr合金化的增韧作用主要来源于共价键数量的减少和强度的削弱，以及更多的反键态被占据.

关键词:

English

Effects of the Alloying Elements Ti, Cr, Al and B on the Mechanical Properties and Electronic Structure of α-Nb₅Si₃

1.
School of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P. R. China
Received Date: 25 September 2013
Available Online: 23 January 2014
Fund Project:
国家自然科学基金(51374130)

航空科学基金(2013ZE52058)资助项目

Abstract:

The structural stability and mechanical properties of α-Nb₅Si₃ alloyed with Ti, Cr, Al and B were investigated using first- principles methods based on density functional theory (DFT) by comparing the formation energy, valence electron concentrations, elastic constants, the shear modulus/bulk modulus ratio, and the Peierls stress. The results show that the structures of the α-Nb₅Si₃ alloys retain the stable D8₁ structure, in which the alloying elements Ti, Cr, Al and B prefer to occupy the Nb^4c, Nb^4c, Si^4a and Si^8h sites of α-Nb₅Si₃, respectively. The addition of Ti, Al and B increase the brittleness of D8₁ structured α-Nb₅Si₃, while Cr addition is beneficial to the toughness of α-Nb₅Si₃. Moreover, the influence of the alloying elements on the ductility/brittleness of α-Nb₅Si₃ was investigated based on analysis of the electronic structure, density of states and Mulliken population. The increased brittleness of α-Nb₅Si₃ by the addition of Ti, Al and B can be attributed to enhanced orientation of the covalent bonds, whereas Cr addition weakens the number and strength of covalent bonds and more anti-bonding states are occupied, thus improving the toughness.

Key words:

1. [1]
  
  (1) Guo, J. M.; Guo, X. P. Rare Met. Cem. Carbides 2008, 36, 39.[郭金明, 郭喜平. 稀有金属与硬质合金, 2008, 36, 39.]
  (1) Guo, J. M.; Guo, X. P. Rare Met. Cem. Carbides 2008, 36, 39.[郭金明, 郭喜平. 稀有金属与硬质合金, 2008, 36, 39.]
2. [2]
  (2) Sekido, N.; Hildal, K.; Sakidja, R.; Perepezko, J. H.Intermetallics 2013, 41, 104. doi: 10.1016/j.intermet.2013.04.023(2) Sekido, N.; Hildal, K.; Sakidja, R.; Perepezko, J. H.Intermetallics 2013, 41, 104. doi: 10.1016/j.intermet.2013.04.023
3. [3]
  (3) Sekido, N.;Wei, F. G.; Kimura, Y.; Miura, S.; Mishima, Y. Phil. Mag. Lett. 2006, 86, 89. doi: 10.1080/09500830600567701(3) Sekido, N.;Wei, F. G.; Kimura, Y.; Miura, S.; Mishima, Y. Phil. Mag. Lett. 2006, 86, 89. doi: 10.1080/09500830600567701
4. [4]
  (4) Geng, J.; Tsakiropoulos, P.; Shao, G. S. Intermetallics 2006, 14,227. doi: 10.1016/j.intermet.2005.04.021(4) Geng, J.; Tsakiropoulos, P.; Shao, G. S. Intermetallics 2006, 14,227. doi: 10.1016/j.intermet.2005.04.021
5. [5]
  (5) Geng, J.; Tsakiropoulos, P.; Shao, G. S. Intermetallics 2007, 15,69. doi: 10.1016/j.intermet.2006.03.001(5) Geng, J.; Tsakiropoulos, P.; Shao, G. S. Intermetallics 2007, 15,69. doi: 10.1016/j.intermet.2006.03.001
6. [6]
  (6) Kim,W. Y.; Yeo, I. D.; Ra, T. Y.; Cho, G. S.; Kim, M. S.J. Alloy. Compd. 2004, 364, 186. doi: 10.1016/S0925-8388(03)00495-X(6) Kim,W. Y.; Yeo, I. D.; Ra, T. Y.; Cho, G. S.; Kim, M. S.J. Alloy. Compd. 2004, 364, 186. doi: 10.1016/S0925-8388(03)00495-X
7. [7]
  (7) Chan, K. S. Metall. Mater. Trans. A 2001, 32A, 2001.(7) Chan, K. S. Metall. Mater. Trans. A 2001, 32A, 2001.
8. [8]
  (8) Duan, Y. H.; Sun, Y. Acta Phys. Sin. 2012, 61, 217101. [段永华, 孙勇. 物理学报, 2012, 61, 217101.](8) Duan, Y. H.; Sun, Y. Acta Phys. Sin. 2012, 61, 217101. [段永华, 孙勇. 物理学报, 2012, 61, 217101.]
9. [9]
  (9) Chen, Y.; Shang, J. X.; Zhang, Y. Phys. Rev. B 2007, 76,184204. doi: 10.1103/PhysRevB.76.184204(9) Chen, Y.; Shang, J. X.; Zhang, Y. Phys. Rev. B 2007, 76,184204. doi: 10.1103/PhysRevB.76.184204
10. [10]
  (10) Sun, Z. P.; Guo, X. P. Mater. Rev. 2008, 22, 79.[孙志平, 郭喜平. 材料导报, 2008, 22, 79.](10) Sun, Z. P.; Guo, X. P. Mater. Rev. 2008, 22, 79.[孙志平, 郭喜平. 材料导报, 2008, 22, 79.]
11. [11]
  (11) Chen, Y.; Shang, J. X.; Zhang, Y. J. Phys.: Condes. Matter 2007,19, 016215. doi: 10.1088/0953-8984/19/1/016215(11) Chen, Y.; Shang, J. X.; Zhang, Y. J. Phys.: Condes. Matter 2007,19, 016215. doi: 10.1088/0953-8984/19/1/016215
12. [12]
  (12) Shang, J. S.; Guan, K.;Wang, F. H. J. Phys: Condes. Matter2010, 22, 085004. doi: 10.1088/0953-8984/22/8/085004(12) Shang, J. S.; Guan, K.;Wang, F. H. J. Phys: Condes. Matter2010, 22, 085004. doi: 10.1088/0953-8984/22/8/085004
13. [13]
  (13) Zhang, L. M.; Fan, G. H.; Ding, S. F. Acta Phys. -Chim. Sin.2007, 23, 1498. [张丽敏, 范广涵, 丁少锋. 物理化学学报,2007, 23, 1498.] doi: 10.3866/PKU.WHXB20071003(13) Zhang, L. M.; Fan, G. H.; Ding, S. F. Acta Phys. -Chim. Sin.2007, 23, 1498. [张丽敏, 范广涵, 丁少锋. 物理化学学报,2007, 23, 1498.] doi: 10.3866/PKU.WHXB20071003
14. [14]
  (14) Fischer, T. H.; Almlöf, J. J. Phys. Chem. 1992, 96, 9768. doi: 10.1021/j100203a036(14) Fischer, T. H.; Almlöf, J. J. Phys. Chem. 1992, 96, 9768. doi: 10.1021/j100203a036
15. [15]
  (15) Wu, M. M.;Wen, L.; Tang, B. Y.; Peng, L. M.; Ding,W. J.J. Alloy. Compd. 2010, 506, 412. doi: 10.1016/j.jallcom.2010.07.018(15) Wu, M. M.;Wen, L.; Tang, B. Y.; Peng, L. M.; Ding,W. J.J. Alloy. Compd. 2010, 506, 412. doi: 10.1016/j.jallcom.2010.07.018
16. [16]
  (16) Ravindran, P.; Subramoniam, G.; Asokamani, R. Phys. Rev. B1996, 53, 1129.(16) Ravindran, P.; Subramoniam, G.; Asokamani, R. Phys. Rev. B1996, 53, 1129.
17. [17]
  (17) Wang, J. Y.; Zhou, Y. C. Phys. Rev. B 2004, 69, 214111. doi: 10.1103/PhysRevB.69.214111(17) Wang, J. Y.; Zhou, Y. C. Phys. Rev. B 2004, 69, 214111. doi: 10.1103/PhysRevB.69.214111
18. [18]
  (18) Hu sson, H.W.; Jansson, U.; Johansson, B.; Eriksson, O.Science 2001, 293, 2434. doi: 10.1126/science.1060512(18) Hu sson, H.W.; Jansson, U.; Johansson, B.; Eriksson, O.Science 2001, 293, 2434. doi: 10.1126/science.1060512
19. [19]
  (19) Joubert, J. M.; Colinet, C.; Rodrigues, G.; Suzuki, P. A.; Nunes,C. A.; Coelho, G. C.; Tedenac, J. C. J. Solid State Chem. 2012,190, 111. doi: 10.1016/j.jssc.2012.02.009(19) Joubert, J. M.; Colinet, C.; Rodrigues, G.; Suzuki, P. A.; Nunes,C. A.; Coelho, G. C.; Tedenac, J. C. J. Solid State Chem. 2012,190, 111. doi: 10.1016/j.jssc.2012.02.009
20. [20]
  (20) Sakidja, R.; Perepezko, J. H.; Kim, S.; Sekido, N. Acta Mater.2008, 56, 5223. doi: 10.1016/j.actamat.2008.07.015(20) Sakidja, R.; Perepezko, J. H.; Kim, S.; Sekido, N. Acta Mater.2008, 56, 5223. doi: 10.1016/j.actamat.2008.07.015
21. [21]
  (21) Chen, Y.; Hammerschmidt, T.; Pettifor, D. G.; Shang, J. X.;Zhang, Y. Acta Mater. 2009, 57, 2657. doi: 10.1016/j.actamat.2009.02.014(21) Chen, Y.; Hammerschmidt, T.; Pettifor, D. G.; Shang, J. X.;Zhang, Y. Acta Mater. 2009, 57, 2657. doi: 10.1016/j.actamat.2009.02.014
22. [22]
  (22) Yang, F.; Fan, T.W.;Wu, J.; Tang, B. Y.; Peng, L. M.; Ding,W.J. Phys. Status Solidi B 2011, 248, 2809. doi: 10.1002/pssb.201147247(22) Yang, F.; Fan, T.W.;Wu, J.; Tang, B. Y.; Peng, L. M.; Ding,W.J. Phys. Status Solidi B 2011, 248, 2809. doi: 10.1002/pssb.201147247
23. [23]
  (23) Kang, Y.W.; Han, Y. F.; Qu, S. Y.; Song, J. X. Chin. J. Aeronaut.2009, 22, 206. doi: 10.1016/S1000-9361(08)60088-6(23) Kang, Y.W.; Han, Y. F.; Qu, S. Y.; Song, J. X. Chin. J. Aeronaut.2009, 22, 206. doi: 10.1016/S1000-9361(08)60088-6
24. [24]
  (24) Guo, L.; Hu, G.; Feng,W. J.; Zhang, S. T. Acta Phys. -Chim. Sin. 2013, 29, 929. [郭雷, 胡舸, 封文江, 张胜涛. 物理化学学报, 2013, 29, 929.] doi: 10.3866/PKU.WHXB201303044(24) Guo, L.; Hu, G.; Feng,W. J.; Zhang, S. T. Acta Phys. -Chim. Sin. 2013, 29, 929. [郭雷, 胡舸, 封文江, 张胜涛. 物理化学学报, 2013, 29, 929.] doi: 10.3866/PKU.WHXB201303044
25. [25]
  (25) Xu, J.;Wu, J. D.; Lai, D. H.; Xie, Z. H.; Munroe, P. Mater. Sci. Tech. -Lond. 2012, 28, 1337. doi: 10.1179/1743284712Y.0000000069(25) Xu, J.;Wu, J. D.; Lai, D. H.; Xie, Z. H.; Munroe, P. Mater. Sci. Tech. -Lond. 2012, 28, 1337. doi: 10.1179/1743284712Y.0000000069
26. [26]
  (26) Chan, K. S.; Davidson, D. L. Metall. Mater. Trans. A 2003, 34A,1833.(26) Chan, K. S.; Davidson, D. L. Metall. Mater. Trans. A 2003, 34A,1833.
27. [27]
  (27) Si,W. P. First-Principles Study on the Elastic Property andElectronic Structure of Ti5Si3 Doped with the Third Element. Ph.D. Dissertation, Jilin University, Changchun, 2010. [司文平.第三组元掺杂下Ti5Si3弹性性质和电子结构的第一性原理计算[D]. 长春: 吉林大学, 2010.](27) Si,W. P. First-Principles Study on the Elastic Property andElectronic Structure of Ti5Si3 Doped with the Third Element. Ph.D. Dissertation, Jilin University, Changchun, 2010. [司文平.第三组元掺杂下Ti5Si3弹性性质和电子结构的第一性原理计算[D]. 长春: 吉林大学, 2010.]
28. [28]
  (28) Chan, K. S. Metall. Mater. Trans. A 2003, 34A, 2315.(28) Chan, K. S. Metall. Mater. Trans. A 2003, 34A, 2315.
29. [29]
  (29) Sekido, N.; Miura, S.; Yamabe-Mitarai, Y.; Kimura, Y.;Mishima, Y. Intermetallics 2010, 18, 841. doi: 10.1016/j.intermet.2009.12.010(29) Sekido, N.; Miura, S.; Yamabe-Mitarai, Y.; Kimura, Y.;Mishima, Y. Intermetallics 2010, 18, 841. doi: 10.1016/j.intermet.2009.12.010
30. [30]
  (30) Yao, Q.; Zhang, Y.; Sun, J. Acta Metall. Sin. 2006, 42, 801.[姚强, 张羽, 孙坚. 金属学报, 2006, 42, 801.](30) Yao, Q.; Zhang, Y.; Sun, J. Acta Metall. Sin. 2006, 42, 801.[姚强, 张羽, 孙坚. 金属学报, 2006, 42, 801.]
31. [31]
  (31) Li, C. B.; Li, M. K.; Yin, D.; Liu, F. Q.; Fan, X. J. Chin. Phys.2005, 14, 2287. doi: 10.1088/1009-1963/14/11/024(31) Li, C. B.; Li, M. K.; Yin, D.; Liu, F. Q.; Fan, X. J. Chin. Phys.2005, 14, 2287. doi: 10.1088/1009-1963/14/11/024
32. [32]
  (32) Pan, L. X.; Xia, Q. L.; Ye, S. L.; Ding, N.; Liu, Z. R. Trans. Nonferrous Met. Soc. China 2012, 22, 1197. doi: 10.1016/S1003-6326(11)61305-8(32) Pan, L. X.; Xia, Q. L.; Ye, S. L.; Ding, N.; Liu, Z. R. Trans. Nonferrous Met. Soc. China 2012, 22, 1197. doi: 10.1016/S1003-6326(11)61305-8
33. [33]
  (33) Zhang, Z. Y.; Yang, D. L.; Liu, Y. H.; Cao, H. B.; Shao, J. X.;Jing, Q. Acta Phys. -Chim. Sin. 2009, 25, 1731. [张子英, 杨德林, 刘云虎, 曹海滨, 邵建新, 井群. 物理化学学报, 2009, 25,1731.] doi: 10.3866/PKU.WHXB20090819
  (33) Zhang, Z. Y.; Yang, D. L.; Liu, Y. H.; Cao, H. B.; Shao, J. X.;Jing, Q. Acta Phys. -Chim. Sin. 2009, 25, 1731. [张子英, 杨德林, 刘云虎, 曹海滨, 邵建新, 井群. 物理化学学报, 2009, 25,1731.] doi: 10.3866/PKU.WHXB20090819

扫一扫看文章

计量

PDF下载量: 687
文章访问数: 961
HTML全文浏览量: 57

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Ti, Cr, Al和B合金化元素对α-Nb₅Si₃力学性能和电子结构的影响

English

Effects of the Alloying Elements Ti, Cr, Al and B on the Mechanical Properties and Electronic Structure of α-Nb₅Si₃

CCS Chemistry：嵌段共聚物自组装成 “三明治”二维有机材料，实现纳米级压力传感功能

CCS Chemistry：颜徐州、鲍哲南：你的皮肤可能是一片SPMs

CCS Chemistry：工作高效不疲劳，只须让催化剂动起来

CCS Chemistry：静电组装导向聚合- 聚电解质纳米凝胶量化制备新策略

CCS Chemistry：金黄色葡萄球菌醛基脱氢酶是如何识别特异性底物的？

计量

通讯作者: 陈斌, bchen63@163.com

中国化学会秘书处